Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

MOUNTING PAD, ELECTR

Active
SPE7M5-26-Q-0807Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of nine mounting pads for electrical-electronic components, identified by NSN 5999-01-647-8284, under solicitation SPE7M5-26-Q-0807, with a response deadline of August 15, 2026, and a required delivery date within 90 days of award. The item is subject to stringent technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, with compliance governed by the revision in effect on the solicitation issue date. Cybersecurity requirements mandate that the vendor be certified as a CMMC Level 2 C3PAO, and the technical data associated with the product is controlled under either ITAR or EAR, prohibiting any export or disclosure to foreign persons without prior authorization from the Department of State or Commerce. Access to this controlled data is restricted to contractors with approved US/Canada Joint Certification Program status, completion of mandatory DOD export control training, and formal approval from DLA. Physical identification of the item must comply with marking requirements, and any non-accepted supplies must have government identification removed. The place of performance is designated as Silverdale, WA, with primary point of contact Barbara Hoffmann, and the procurement is managed by the Department of Defense's Active Devices Division under NAICS code 334419.

General Info

Procure nine NSN 5999-01-647-8284 mounting pads, CMMC Level 2 certified, ITAR/EAR controlled, delivery within 90 days, Silverdale, WA.

Agency

Department Of Defense → ACTIVE DEVICES DIVISIONView Agency

NAICS

334419 - Other Electronic Component ManufacturingView NAICS

Place of Performance

7000 FINBACK CIRCLE, SILVERDALE, WA, 98315-7000, US

Set-Aside

NONE

Documents

(1)

SPE7M5-26-Q-0807.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ACTIVE DEVICES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ACTIVE DEVICES DIVISION
View Agency Profile
Office AddressUS
Contacts
Barbara Hoffmann
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
MOUNTING PAD,ELECTRICAL-ELECTRONIC COMPO
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO) RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
RD002, COVERED DEFENSE INFORMATION APPLIES
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 5999-01-647-8284 Quantity: 9 EA Purchase Request: 7017185279QTY: 9 Delivery: 90 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 334419
New
DIBBS
CRYSTAL UNIT, QUARTZ
Solicitation # SPE7M5-26-Q-0812
A crystal unit, quartz with NSN 5955-00-831-6446 is being solicited under contract number SPE7M5-26-Q-0812 by the Defense Logistics Agency on behalf of the Department of Defense. The request is for a single unit with purchase request number 7017418127, and the solicitation was posted on July 31, 2026, with a response deadline of August 7, 2026. This is a federal procurement action with no set-aside classification specified, indicating it is open to all qualified vendors. The place of performance and office address details are not provided, but the contract is managed within the U.S. federal procurement system. Interested parties must submit responses prior to the deadline via the official DIBBS platform through the provided link.
Defense Logistics Agency

POSTED

about 13 hours ago

DEADLINE

in 6 days
View Details
NAICS: 334419
New
DIBBS
AMPLIFIER, RADIO FRE
Solicitation # SPE7M5-26-Q-0766
The Defense Logistics Agency, under the Department of Defense, has issued a solicitation for 41 units of an amplifier, radio frequency, identified by NSN 5996-01-390-3676, under purchase request 7017384568. The solicitation, numbered SPE7M5-26-Q-0766, was posted on July 31, 2026, with a response deadline of August 10, 2026. The contract is open to federal suppliers and does not specify a set-aside preference or NAICS code. Performance location and point of contact details are not provided, but the solicitation is administered through the DLA’s DIBBS platform, and all submissions must be made via the official link provided. The requirement is for a critical radio frequency component used in defense systems, and timely response is essential to meet operational needs.
Defense Logistics Agency

POSTED

about 13 hours ago

DEADLINE

in 9 days
View Details
NAICS: 334419
New
DIBBS
LIGHT, INDICATOR
Solicitation # SPE4A6-26-T-09LN
The contract pertains to the procurement of a single Light, Indicator unit with NSN 6210-01-509-7733 and part numbers H651-6104-008 and 351-27872-1007, supplied by Electric Boat Corporation and Safran Electronics & Defense, Avionics respectively. Delivery is required within 20 days FOB destination, with zero variance allowed in quantity, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including specific preservation methods and marking as “Fragile,” with strict adherence to DLA packaging standards and prohibition of mercury or mercury compounds in preservation, packaging, and marking. Sampling follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and attributes are assigned verification levels or AQLs corresponding to critical, major, and minor classifications. Mercury-containing components are explicitly forbidden except in functional applications such as batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or NAVSEA-specified reagents, with portable devices requiring shockproof design and double mercury containment as per NAVSEA 5100-003D. The item is destined for USS HYMAN G RICKOVER (SSN 795) via FPO AE 09591, with shipment required through traceable means, excluding parcel post, and using the provided VSM and RDD codes. The contract references the DLA Master List of Technical and Quality Requirements for incorporated specifications, and all technical and quality provisions are controlled by the relevant revision effective at the solicitation or award date depending on acquisition scale. The required delivery date is July 17, 2026, and contact for queries is Traci Beaudoin at DLA.
ASC COMMODITIES DIVISION

POSTED

about 13 hours ago

DEADLINE

in 4 days
View Details
NAICS: 334419
New
DIBBS
MICROCIRCUIT, LINEAR
Solicitation # SPE7M1-26-T-219W
This contract is for the procurement of 50 units of a linear microcircuit under Federal Supply Class 5962, with a total value of $2,500. The item, identified by NSN 5962011407689 and part number 7109258-002, must be sourced from approved manufacturers including GE Aviation Systems LLC, Micro USPD Inc, and Microsemi Corp Massachusetts. Delivery is required FOB origin within 52 days to a designated storage and distribution facility in Columbus, Ohio, with no variance allowed in quantity. The contract mandates strict compliance with military packaging standards MIL-STD-2073-1E and marking requirements per MIL-STD-129, including special packaging for ESD and EMI protection that must meet MIL-PRF-81705 specifications using qualified barrier materials from QPL-81705. Each unit pack must be marked in accordance with IPC/JEDEC J-STD-609 to indicate lead content and finish. Traceability is critical: contractors must maintain supply chain documentation per DLA Procurement Note C03, submit a completed DLA L&M Form 918 with unredacted traceability or test reports via email no later than 15 days before delivery, and await written authorization before shipping. Shipment without authorization or discrepancies in documentation void payment. Sampling must follow MIL-STD-1916 or equivalent zero-defect standards, and all attributes are assigned strict verification levels. Mercury and mercury compounds are prohibited except in specific exempted applications per NAVSEA 5100-003D. The contractor must comply with cybersecurity requirements, including CMMC Level 2 self-assessment and DFARS 252.204-7012 for safeguarding covered defense information. The contract is a total small business set-aside under FAR 19.5, and all offerors must be registered in SAM and provide valid CAGE and UEI codes. Packaging must use A-A-59136 cushioning with density between 1.7 to 2.2 pounds per cubic foot and thickness exceeding component lead length by at least 1/8 inch, or use form-fitting ESD containers. Payment is to be rendered electronically through WAWF, and all submissions must follow strict email attachment protocols including file size limits and naming conventions. Compliance with all
MARITIME SUPPLY CHAIN

POSTED

about 13 hours ago

DEADLINE

in 4 days
View Details
NAICS: 334419
New
DIBBS
PLATE, ELECTRICAL SHIEL
Solicitation # SPE7M5-26-Q-0813
The contract pertains to the procurement of 11 units of a Plate, Electrical Shield identified by NSN 5999-01-347-4699 under solicitation SPE7M5-26-Q-0813, with a firm fixed price and zero variance allowed in quantity. Delivery is required within 100 days after award, with inspection and acceptance occurring at the destination. The item must comply with referenced technical drawings and specifications, including revisions dated 2021, 2022, and 2023, and must meet all requirements listed in the DLA Master List of Technical and Quality Requirements, which supersede other standards. The supplier must adhere to stringent packaging directives per RP001 and MIL-STD-129, with hazardous materials following FED-STD-313 and IP025, while non-hazardous items must comply with ASTM D3951 unless overridden by DLA requirements. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero defects expected unless otherwise stated, and critical attributes require verification levels VII, IV, and II. The product must be marked as specified under RQ017 and managed under configuration control via engineering change procedures. Compliance with CMMC Level 2 cybersecurity self-assessment is mandatory, and the use of ozone-depleting substances is prohibited without written approval from the contracting officer. All packaging and labeling must be properly marked and palletized as directed, with delivery addressed to DLA Distribution at the New Cumberland, PA facility. The item is not eligible for commercial item exemptions and is subject to full government oversight throughout the supply chain.
ACTIVE DEVICES DIVISION

POSTED

about 13 hours ago

DEADLINE

in 14 days
View Details
NAICS: 334419
New
DIBBS
TESTING MACHINE, ELE
Solicitation # SPE4A5-26-T-308B
The contract is for the procurement of three Testing Machines, ELE, identified by part number 70108-28901-101 and NSN 4920017176281, under solicitation SPE4A5-26-T-308B. Delivery is required FOB origin within 167 days of contract award, with no variance permitted in quantity. Inspection and acceptance occur at the point of origin, and all items must comply with the DLA Master List of Technical and Quality Requirements, which take precedence over other standards such as ASTM D3951. Packaging must adhere to MIL-STD-129 and the DLA Packaging Requirements (RP001), with palletization following specified guidelines. Sampling must follow MIL-STD-1916 or ASQ H1331, Table 1, using zero-defect acceptance criteria unless otherwise stated, with attributes classified as critical, major, or minor assigned corresponding verification levels or AQLs. Cybersecurity compliance requires a CMMC Level 2 self-assessment, and covered defense information protocols apply. Item Unique Identification is not required per the service customer’s request, and government identification must be removed from non-accepted supplies. The unit of issue is each, and pricing is set at $3.00 per unit. Delivery is to the DLA Distribution facility in New Cumberland, Pennsylvania, with transportation governed by DLAD Proc Notes C19 and C20. The contract was issued on July 23, 2026, with a response deadline of July 31, 2026, and the original required delivery date is July 13, 2027.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 13 hours ago

DEADLINE

in 4 days
View Details
NAICS: 334419
New
Federal
63--CONTROL,ALARM
Solicitation # SPRPA126QUB46
The government intends to procure five units of a commercial, nondevelopmental, off-the-shelf alarm control component under a sole-source contract authority authorized by FAR 6.302-1, with no requirement for competitive bidding. The item, identified by NSN 7R-6340-016711932-P8 and reference number 475928-01, will be delivered FOB origin, and technical specifications are governed by applicable commercial vendor catalogs, price lists, or manuals assigned a technical manual number. While the Government is not applying the policies of FAR Part 12 for commercial items, interested parties may submit commercial item capability statements within 15 days to demonstrate suitability. All responsible sources may respond with proposals, quotations, or capability statements within 45 days of the notice, or 30 days if award is under an existing Basic Ordering Agreement, though submission does not guarantee competition. Documents such as military specifications, standards, QPLs, and handbooks may be accessed via ASSIST-Online or ordered through the DODSSP website after account registration; internet-inaccessible parties may contact the DODSSP Help Desk or mail requests to Philadelphia, PA. The solicitation number is SPRPA126QUB46, posted on July 31, 2026, with responses due by September 15, 2026, and the contracting office is located at the Department of Defense, Defense Logistics Agency Aviation in Philadelphia, PA, reachable through the primary point of contact, Keli Barish.
Pa DLA Aviation At Philadelphia

POSTED

about 18 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 334419
New
Federal
FIBER OPTIC GYRO AS
Solicitation # SPRMM126QHE49
This contract pertains to the procurement of a Fiber Optic Gyro AS under solicitation SPRMM126QHE49, issued by the Defense Logistics Agency (DLA) Mechanicsburg with a response deadline of September 14, 2026. The requirement mandates strict adherence to specific military standards including MIL-STD-130 Rev N for item marking, MIL-STD-2073 for packaging, and compliance with designated CAGE code 53711 and reference number 8241846. Offerors must be authorized distributors of the original equipment manufacturer and must provide written proof of authorization. The contract stipulates that no substitutions or design changes may be made without prior written approval from the NAVICP-MECH Contracting Officer, and any changes must be classified under one of six specified code categories with supporting documentation. Inspection, acceptance, and quality assurance responsibilities rest with the contractor, who must maintain inspection records for 365 days post-delivery. All items must comply fully with contract requirements regardless of sampling thresholds, and defective material will not be accepted. Electronic submission is mandatory through the Wide Area Workflow (WAWF) system for invoices and receiving reports, and contractors are required to register for the Procurement Integrated Enterprise Environment (PIEE) Electronic Data Access (EDA) portal to monitor contract actions. The solicitation prohibits changes to production facilities without approval, and such requests must include a $250 administrative cost reduction. The contract incorporates multiple clauses including mandatory use of WFP Mod Assist, cybersecurity maturity certification requirements, small business subcontracting obligations, and preference for U.S.-flag commercial vessels. It also includes security prohibitions, alternate annual representations, and priority rating provisions for national defense purposes. Technical data and drawings are not provided, and all referenced specifications must be obtained independently through Department of Defense sources. Delivery timelines and offer validity periods are unspecified but must be confirmed by the offeror. All communications must include a valid email point of contact, and vendors are strongly encouraged to register with NAVSUP Weapon System Support to receive automated notifications regarding contract issuance and modifications.
SPRMM1 DLA Mechanicsburg

POSTED

about 18 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 334419
New
Federal
Electron Tube
Solicitation # SPE7M526Q0801
DLA Land and Maritime is conducting market research to identify potential suppliers for an Electron Tube with NSN 5960-00-230-8366 and part number 8660, currently sourced only from Communication & Power Industries under approved specifications MIL-PRF-1N(1) SUP 1 and MIL-PRF-1/1648O(1). This is not a solicitation or request for quotes; no contract is being issued at this time. The goal is to find additional qualified manufacturers or distributors capable of meeting the technical requirements and supplying the item to the Qualified Parts List standard. A Firm Fixed Price contract for 897 units is anticipated, with price breaks requested for quantities between 200 and 1,300 units, and delivery will be FOB Origin with inspection and acceptance taking place at destination. Interested parties must submit a letter of interest including CAGE code, product line, quality certifications, company size, customer base, and point of contact information to the contracting officer by August 10, 2026. Any proposed alternate source must provide a complete technical data package since the government lacks sufficient rights or documentation to procure this item independently. Participation in this market research is voluntary, at the respondent’s expense, and does not guarantee future solicitation or reimbursement.
DLA Land And Maritime

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334419
New
Federal
UPS System Upgrade
Solicitation # N0016426Q0279
The U.S. Navy’s Naval Surface Warfare Center Crane is seeking to upgrade and calibrate its uninterruptible power supply (UPS) system under contract number N0016426Q0279, with a closing date of August 8, 2026, at 12:00 AM Eastern Daylight Time. The procurement is being conducted as a non-competitive action with Eaton Corporation identified as the intended sole source, although other responsible vendors may submit capability statements for consideration; the government retains sole discretion on whether to proceed with competition. All participants must be registered in the System for Award Management and the contract is designated for small businesses. The requirement falls under NAICS code 334419 and is administered by the Department of Defense. Offers must be submitted via email to Joshua Tester at joshua.e.tester.civ@us.navy.mil, and any amendments to the solicitation will be posted exclusively on sam.gov, making it the vendor’s responsibility to monitor for updates. The place of performance is Crane, Indiana, and secondary point of contact is Shauna Pegg.
Nswc Crane

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334419
New
DIBBS
Electronic Accessory Kit SupplyThe contract involves the supply of a single unit of an electronic accessory kit identified by NSN 5999-01-599-9430 and Part Number 069085-0001, with all packaging and labeling requirements strictly aligned with Defense Logistics Agency standards. The deliverable must be fully compliant and ready for immediate use within the Department of Defense supply chain. Performance is required at the designated location in New Cumberland, Pennsylvania, with a zip code of 17070-5002, and all logistics must conform to federal acquisition protocols for military hardware. The contract is structured as a subcontract under the NAICS code 334419, indicating classification within other electronic component manufacturing. The solicitation was posted on July 30, 2026, with a response deadline set for August 10, 2026, limiting the window for interested parties to submit proposals. The contracting activity is managed by the Active Devices Division under the Department of Defense, and while no specific point of contact or set-aside designation is provided, the procurement is accessible through the DIBBS system via the provided URL. The absence of a solicitation number suggests this may be an internal or non-publicly advertised opportunity, and the lack of state or country details in the office address implies the focus is narrowly on the performance location and compliance with DLA logistics frameworks rather than broad administrative outreach.
ACTIVE DEVICES DIVISION

POSTED

1 day ago

DEADLINE

in 9 days
View Details
NAICS: 334419
New
DIBBS
Band-Pass Filter Manufacturing and DeliveryThe contract requires the manufacture and delivery of one unit of a band-pass filter identified by NSN 5915-01-193-8667, fully compliant with applicable military specifications. The item must be produced, packaged, labeled, and handled in accordance with all federal and defense standards for hazardous materials, ensuring safe transit and compliance with regulatory protocols. The work is being conducted under a subcontract issued by the Active Devices Division of the Department of Defense, with the place of performance specified as New Cumberland, Pennsylvania, ZIP 17070-5002. The solicitation was posted on July 30, 2026, and responses are due by August 10, 2026, with the NAICS code 334419 indicating classification under Other Electronic Component Manufacturing. The contract is accessible through the DIBBS portal under reference number SPE7M526T361K.
ACTIVE DEVICES DIVISION

POSTED

1 day ago

DEADLINE

in 9 days
View Details

More opportunities from Department Of Defense → ACTIVE DEVICES DIVISION

Same awarding agency

NAICS: 334417
New
DIBBS
SLEEVE, LOCKING, ELEC
Solicitation # SPE7M5-26-Q-0819
The contract pertains to the procurement of six locking sleeves for electrical connectors, identified by the NSN 5935-01-666-8618, under solicitation number SPE7M5-26-Q-0819. The supply is priced on a firm fixed price basis with no tolerance for quantity variance, and delivery is required within 125 days after award. Inspection and acceptance occur at the destination, with the point of origin as the FOB location. Packaging must comply strictly with DLA’s Master List of Technical and Quality Requirements, which supersede all other standards; non-hazardous materials must be packaged in accordance with ASTM D3951, while hazardous materials require adherence to TQ requirement IP025 as defined by FED-STD-313. All packaging and labeling must follow MIL-STD-129 specifications, and palletization must meet DLA Packaging Requirements for Procurement (RP001). The item is to be delivered to a U.S. military address in Prince Sultan Air Base, Saudi Arabia, with transportation governed by DLAD Procurement Notes C19 and C20. The shipment is identified with RDD 777 and tied to project 9AL TP 2. The unit of issue is each, and the contract mandates compliance with all applicable DLA standards, including correct marking, labelling, and documentation. The point of contact for the acquisition is Karen Collins of the Department of Defense’s Active Devices Division, with a response deadline of August 15, 2026, and a posted date of July 31, 2026. The material need date is July 23, 2026, and the NSN is linked to a specific purchase request with internal government tracking identifiers.
Electronic Connector Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 14 days
View Details
NAICS: 334417
New
DIBBS
CONNECTOR, RECEPTACLE, E
Solicitation # SPE7M5-26-Q-0808
The contract specifies the procurement of two electrical receptacle connectors under NSN 5935-01-494-0348, with a firm fixed price and zero variance in quantity. The item must comply with military specification MIL-DTL-38999N Revision N dated 09/14/2023 and MIL-DTL-38999/24J Revision J dated 08/11/2022, and is subject to qualification requirements under the Qualified Products List for Federal Stock Class 5935. The use of Class I ozone-depleting substances in any phase of manufacturing or testing is strictly prohibited unless approved in writing by the contracting officer, though this restriction does not apply to commercial items as defined in FAR 11.001. Packaging must adhere to MIL-STD-2073-1E and DLA packaging requirements, with marking in accordance with MIL-STD-129 and no special marking codes. The item must be shipped via the fastest traceable means, excluding parcel post, to the designated government facility at Picatinny Arsenal, New Jersey, with delivery due 125 days after contract award. Inspection and acceptance occur at destination, and the contractor is required to comply with configuration change management procedures and any engineering change proposals. The procurement is part of a federal solicitation issued by the Department of Defense, with a response deadline of August 8, 2026, and a required delivery date of June 23, 2026.
Electronic Connector Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332996
New
DIBBS
CLAMP, HOSE
Solicitation # SPE7M5-26-T-337C
The contract pertains to the procurement of 73 units of a hose clamp designated as CLAMP, HOSE, manufactured from aluminum alloy band material with a T-bolt steel alloy component and a self-locking nut, featuring an 8.25-inch nominal inside diameter and a 0.62-inch nominal width. The item is identified by NSN 4730-00-439-2933 and is designated as a critical application item, with approved sources including Eaton Aeroquip LLC (P/N 321-62-825S) and V I J Corp (P/N U11-62-825S). The unit price is $73.00 per unit, resulting in a total contract value of $5,329.00 for the base quantity, with delivery required within 81 days after award, and the original required delivery date set for June 12, 2026, with a need ship date of May 5, 2026. Delivery is to be FOB Origin, with inspection and acceptance occurring at the destination, specifically at DLA Distribution Warner Robins, Building 376, Robins Air Force Base, GA. The contract mandates strict adherence to DLA Packaging Requirements for Procurement (RP001), packaging to ASTM D3951 unless superseded by DLA Master List of Technical and Quality Requirements, and labeling and marking per MIL-STD-129 including unit of issue and quantity per unit pack as specified. All packaging must be palletized in accordance with RP001, and the item is subject to the DLA Master List, which supersedes any conflicting standards. The Contractor must comply with hazard communication requirements under 29 CFR 1910.1200, submit Safety Data Sheets prior to award for any hazardous materials, and apply appropriate hazard labels aligned with Federal Standard No. 313. The contract includes clauses related to small business representation, equal opportunity, trafficking in persons, employment eligibility, cybersecurity safeguards, and prohibition of hexavalent chromium and covered telecommunications equipment. Invoicing is to be processed exclusively through WAWF, with no use of IPP permitted. The contracting office is the DLA Land and Maritime Active Devices Division, with Amy Plymale-Hillis as the point of contact, and proposals must be submitted via DIBBS by July 31,
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 4 days
View Details
NAICS: 335931
New
DIBBS
ADAPTER, CONNECTOR
Solicitation # SPE7M5-26-Q-0805
The item is an adapter connector with NSN 5935-01-471-9077, totaling 91 units under purchase request 7017601636, with a delivery timeline of 121 days ADO. This technical item contains data subject to U.S. export control regulations, including ITAR or EAR, meaning any disclosure to foreign persons—regardless of location—constitutes an export requiring prior authorization from the Department of State or Department of Commerce. Compliance with DFARS 252.225-7048 is mandatory, and distribution is restricted exclusively to DLA contractors who hold valid US/Canada Joint Certification Program certification, have completed required DOD export-controlled data training and questionnaire, and have received formal approval from DLA to handle such data. The solicitation number is SPE7M5-26-Q-0805, posted on July 31, 2026, with responses due by August 15, 2026, under NAICS code 335931. The procurement is managed by the Department of Defense’s Active Devices Division, with performance at Cherry Point, North Carolina, and primary point of contact is Barbara Hoffmann, reachable via email and phone provided.
Current-Carrying Wiring Device Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 14 days
View Details
NAICS: 334416
New
DIBBS
FILTER, RADIO FREQUE
Solicitation # SPE7M5-26-T-336P
This contract specifies the procurement of a radio frequency interference filter with NSN 5915-00-726-7326 and part number 46438-1, supplied by ONTIC ENGINEERING & MANUFACTURING, INC., HONEYWELL INTERNATIONAL INC., and EMS DEVELOPMENT CORPORATION. The requirement is for 16 units to be delivered FOB origin within 50 days, with no tolerance for quantity variance, and inspection and acceptance occurring at the destination. All technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, which supersede commercial standards such as ASTM D3951. Packaging must comply with DLA’s RP001 requirements and MIL-STD-129 labeling; non-hazardous items must be commercially packaged per DLA guidance, while hazardous items must adhere to TQ requirement IP025. The delivery destination is the DLA Distribution Depot in Tinker AFB, Oklahoma, and the unit of issue is each. The contract incorporates cybersecurity requirements mandating a CMMC Level 2 self-assessment, and the supplier must remove government identification from non-accepted items. The solicitation number is SPE7M5-26-T-336P, issued by the Department of Defense’s Active Devices Division, with a response deadline of July 31, 2026, and an original delivery due date of September 12, 2027. Shipments must follow DLAD Proc Notes C19 and C20, and all documentation must align with the approved unit of issue per the DLA reference link.
Capacitor, Resistor, Coil, Transformer, and Other Inductor Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 4 days
View Details
NAICS: 334417
New
DIBBS
CONNECTOR, PLUG, ELECTRI
Solicitation # SPE7M5-26-Q-0814
The contract specifies the procurement of 50 electrical plug connectors with NSN 5935-00-823-0367 under solicitation SPE7M5-26-Q-0814, requiring strict adherence to technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements. The item is qualified and must conform to the Qualified Products List for Federal Stock Class 5935, with configuration changes subject to Engineering Change Proposal and variance request processes. The connector must comply with SAE AS50151 Revision E dated June 1, 2020, and is designated as a critical application item, necessitating full conformance to performance and safety criteria. The use of ozone-depleting substances is strictly prohibited without written approval from the Contracting Officer, and mercury or mercury-containing compounds are banned unless explicitly exempted for functional uses in batteries, lighting, sensors, or weapon systems, with additional containment requirements for portable devices. Packaging and marking must follow MIL-STD-2073-1E and MIL-STD-129, with specific packaging codes and procedures outlined, and no special marking is required. Sampling and inspection methods must align with MIL-STD-1916 or ASQ H1331, applying zero non-conformances unless otherwise specified, and unspecified attributes are treated as major. Delivery is FOB origin with a firm fixed price and zero variance tolerance, and the item must be delivered within 90 days after award to the designated DLA distribution center in Tracy, California. The contract prohibits substitution of approved sources without documented manufacturer authorization and pre-award approval, and all materials must comply with hazardous materials shipping guidelines per DLAD Procurement Notes. Pricing is fixed, and the item is intended for federal government use with a required ship date of December 23, 2026.
Electronic Connector Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 14 days
View Details
NAICS: 334417
New
DIBBS
BACKSHELL, ELECTRICAL C
Solicitation # SPE7M5-26-Q-0816
The contract specifies the procurement of 197 units of a backsheel for an electrical connector with NSN 5935-01-225-5386, classified as a qualified item requiring compliance with the Qualified Products List for Federal Stock Class 5935 connector assemblies and contacts. The item must conform to SAE AS85049F Revision F dated April 1, 2021, and the technical and quality requirements outlined in the DLA Master List of Technical and Quality Requirements, which supersede any conflicting standards. The use of Class I ozone-depleting substances in any phase of design, manufacturing, or testing is strictly prohibited unless explicit written approval is obtained from the Contracting Officer, and this prohibition applies regardless of referenced military or federal specifications. The item is designated as a critical application item and must be packaged in accordance with DLA Packaging Requirements, marking and labeling in compliance with MIL-STD-129, and palletization as specified under RP001. If deemed hazardous per FED-STD-313, packaging must meet TQ requirement IP025; otherwise, commercial packaging per ASTM D3951 applies, though DLA requirements take precedence. The contract is firm fixed price with zero variance in quantity, and delivery is due within 100 days after date of award, with inspection and acceptance occurring at destination. The item is to be shipped to DLA Distribution Jacksonville, and transportation logistics are governed by DLAD Proc Notes C19 and C20. The solicitation number is SPE7M5-26-Q-0816, with a response deadline of August 15, 2026, and the material is needed by January 26, 2027.
Electronic Connector Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 14 days
View Details
NAICS: 334417
New
DIBBS
CONNECTOR BODY, PLUG
Solicitation # SPE7M5-26-U-0051
The contract is for the procurement of a CONNECTOR BODY, PLUG with NSN 5935014449281 under an Indefinite Delivery Contract (IDC) issued by the Defense Logistics Agency’s Active Devices Division. The solicitation, numbered SPE7M5-26-U-0051, was posted on July 16, 2026, with a response deadline of July 31, 2026, and is set aside exclusively for Women-Owned Small Businesses under NAICS code 334417. The estimated quantity is five units at a unit price of $5.00, with no guaranteed minimum order but a contract ceiling of $350,000.00, and delivery is required within 104 days of award, FOB Origin. Inspection and acceptance occur at the destination, with compliance standards including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, and all packaging must adhere to DLA’s RP001 requirements. Mercury or mercury-containing compounds are prohibited unless specifically exempted for functional uses such as batteries, sensors, or medical instruments, and portable devices containing mercury must have a secondary containment barrier compliant with NAVSEA 5100-003D. All contractors must comply with a comprehensive set of Federal Acquisition Regulation (FAR) and Defense Federal Acquisition Regulation Supplement (DFARS) clauses covering employment equity, human trafficking prevention, employment eligibility verification, sustainable products, hazardous materials handling, export controls, electronic invoicing via WAWF, cybersecurity safeguards including NIST SP 800-171, and prohibitions on hexavalent chromium and certain Chinese military companies. Offerors must provide their Unique Entity Identifier and CAGE code, certify their small business status, and disclose any participation in joint ventures or provision of covered telecommunications equipment as required by 252.204-7016 and 252.204-7017. Special requirements include hazard communication labeling per OSHA standards, restrictions on foreign-flagged vessels for ocean transport, and mandatory notification of potential safety issues. Proposals must be submitted electronically through the DLA-BSM Internet Bid Board System by the stated deadline, with no physical submissions permitted, and failure to meet any technical, packaging, or regulatory requirement will result in rejection. Long-term contract performance requires recertification
Electronic Connector Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 4 days
View Details
NAICS: 334417
New
DIBBS
CONNECTOR, RECEPTACLE, E
Solicitation # SPE7M5-26-Q-0815
The contract specifies the procurement of an electrical receptacle connector with NSN 5935-01-412-1961 and part number MS17346R36N52P, meeting technical requirements defined by MIL-DTL-22992H(4) Supplement 1 and referenced specification MS17346F. The item is classified as a qualified product requiring compliance with the Qualified Products List for Federal Stock Class 5935, and manufacturing by Amphenol, Matrix, or Pyle National with lot date codes between July 2006 and June 2016 is strictly prohibited. Traceability documentation may be required to verify manufacturing origin and dates. The product must be free of intentional mercury or mercury-containing compounds except in specified exempted applications such as certain batteries, instruments, or weapon systems, and any portable devices containing mercury must meet shock-proof and secondary containment standards per NAVSEA 5100-003D. Use of Class I ozone-depleting substances in any phase of manufacturing or processing is prohibited without written contracting officer approval. The connector is designated a critical application item, and packaging must comply with MIL-STD-2073-1E and MIL-STD-129 marking standards. Palletization follows DLA packaging requirements, with no special marking required. Delivery is due in two shipments of 13 and 11 units respectively, 167 days after award, with firm fixed pricing, zero quantity variance, and destination-based inspection and acceptance. FOB is origin, and all shipments are directed to the DLA Distribution facility in New Cumberland, Pennsylvania. The solicitation number is SPE7M5-26-Q-0815, with responses due by August 15, 2026, and deliveries scheduled for April and November 2026.
Electronic Connector Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 14 days
View Details
NAICS: 334417
New
DIBBS
SHELL, ELECTRICAL CO
Solicitation # SPE7M5-26-T-337E
The contract solicitation SPE7M5-26-T-337E is for the supply of electrical shell components identified by NSN 5935011318012, with a total quantity of 196 TE units, where each TE consists of ten units packaged and labeled as a single unit. The contract is for a fixed-price delivery requiring shipment to Robins Air Force Base, Georgia, with delivery due 38 days after award, no later than September 8, 2026. Title and risk of loss transfer at origin per FOB ORIGIN terms, with inspection and acceptance occurring at destination. Packaging must strictly adhere to MIL-STD-2073-1E, with clean and dry preservation method and no preservation or cushioning materials. Marking must comply with MIL-STD-129, and no special marking is required. The item is classified as a critical application item with specific part numbers from TE Connectivity, Amphenol, and Northrop Grumman Systems Corporation referenced. Mercury or mercury-containing compounds are prohibited unless used in designated functional components such as batteries, fluorescent lights, sensors, weapon systems, or specified chemical reagents; portable lamps and instruments containing mercury must include a second boundary of containment per NAVSEA 5100-003D. The contract includes comprehensive compliance with federal acquisition regulations and Department of Defense directives, including requirements for hazardous material labeling under DFARS 252.223-7001, prohibition of hexavalent chromium and toxic material storage, cyber security safeguards per NIST SP 800-171 and safeguarding covered defense information, and export control compliance. Contractors must adhere to employment eligibility verification, anti-trafficking, equal opportunity for workers with disabilities, sustainable procurement, and small business representation requirements. Payment must be submitted electronically via Wide Area WorkFlow, and invoicing follows standard DD 1155 procedures. All offerors must submit proposals through the DLA Internet Bid Board System by July 31, 2026, and provide their Unique Entity Identifier and CAGE code. Compliance with all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements is mandatory, and any deviations or waivers are explicitly governed by issued deviations. The total contract value is $196.000, based on a unit price of $1.000 per TE, with no option quantities or price escalation
Electronic Connector Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 4 days
View Details
NAICS: 334417
New
DIBBS
CONNECTOR, RECEPTACLE, E
Solicitation # SPE7M5-26-Q-0811
This contract specifies the procurement of two electrical connector receptacles with NSN 5935-01-494-0348, governed by strict technical and quality standards outlined in the DLA Master List of Technical and Quality Requirements. The item is a qualified product and must comply with the Qualified Products List requirements under procurement note H01 for Federal Stock Class 5935 connector assemblies and contacts. Manufacturing must adhere to MIL-DTL-38999N Revision N dated 09/14/2023 and MIL-DTL-38999/24J Revision J dated 08/11/2022, and the use of any Class I ozone-depleting substances in production, cleaning, or testing is strictly prohibited unless written approval from the contracting officer is secured. Configuration changes require formal engineering change proposals and variance requests, and the item must be marked in accordance with MIL-STD-129 with no special marking codes. Packaging must meet DLA Packaging Requirements and MIL-STD-2073-1E standards, using specified materials and methods including dry preservation and D3 unit containers, with palletization following RP001 guidelines. The contract mandates a firm fixed price with zero variance in quantity, and delivery is required within 125 days after the award date at the destination point with FOB origin terms. Shipments must be sent via the fastest traceable means, explicitly excluding parcel post, and directed to the specified Picatinny Arsenal addresses. The item is associated with purchase request 7017274824 and has a requested delivery date of June 23, 2026. The solicitation number is SPE7M5-26-Q-0811, with a response deadline of August 15, 2026, and the contract is issued under NAICS code 334417 by the Department of Defense’s Active Devices Division. All compliance, documentation, and logistical requirements must be fully satisfied to meet government acceptance criteria.
Electronic Connector Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 14 days
View Details