Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

Multimode Reader with Gas Controller

Active
140G0226Q0087Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract solicitation titled Multimode Reader with Gas Controller under solicitation number 140G0226Q0087 is a Small Business Set-Aside for total small business participation as defined by FAR 19.5, with a NAICS code of 334516 indicating classification under Instruments and Related Products Manufacturing. The opportunity is issued by the Office of Acquisition Grants—Denver within the Department of the Interior, and the only specified place of performance is in Denver, Colorado. A single unit of the Synergy H1 Multimode Reader with Gas Controller is being procured, likely for laboratory or research applications requiring precise environmental control and multiplexed analytical capabilities. The solicitation was posted on July 15, 2026, with responses due by July 30, 2026, at 11:00 PM Eastern Time. Jennifer Rollin serves as the primary point of contact, reachable via email at jennifer_rollin@ios.doi.gov or by phone at 303-236-9321. All proposals must be submitted through the SAM.gov portal as indicated by the provided UI link, and the contract is governed by Executive Order 14398, which emphasizes procurement integrity and small business participation.

General Info

Small business set-aside for one Synergy H1 Multimode Reader with Gas Controller in Denver, Colorado.

Agency

Department Of The Interior → Ofc Of Acquisition Grants-DenverView Agency

NAICS

334516 - Analytical Laboratory Instrument ManufacturingView NAICS

Place of Performance

CO

Set-Aside

SBA

Documents

(1)

Sol_140G0226Q0087.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of The Interior → Ofc Of Acquisition Grants-Denver
Contacts1 person available
OfficeDENVER, CO, 80225, USA
Organization / Agency
Department Of The Interior → Ofc Of Acquisition Grants-Denver
View Agency Profile
Office AddressDENVER, CO, 80225, USA

Full Description

Show more
EO 14398 and Purchase of quantity 1 Synergy H1 Multimode Reader with Gas Controller

Similar Contracts

Same NAICS industry code

NAICS: 334516
New
DIBBS
MEASURING TUBE, GAS ANAThe measuring tube for gas analyzer is designed to measure carbon dioxide content in compressed gases with a range of 100 to 3000 parts per million for one liter of air. It is a glass tube with rounded, melted ends and is packaged in quantities of ten per package designated as PG. The item is identified by NSN 6630-12-189-3126 and is governed by the procurement document SPE2DH-26-T-5302. As a Type I (Code M) shelf-life item, it must have a non-extendable shelf life of 24 months, with no more than three months having elapsed from the date of manufacture to the date of delivery to the government. Labeling must include the date of manufacture, expiration or retest date, contract number, and lot number in accordance with the latest revision of Medical Marking Standard No. 1. Packaging must be commercial grade, sealed to prevent damage or breakage, and placed in suitable exterior shipping containers that ensure safe delivery at the lowest carrier rate to the specified point of delivery. All markings must conform to Medical Marking Standard No. 1, which supersedes MIL-STD-129. The item is subject to DLA packaging requirements, potential exposure to covered defense information, and requirements for removal of government identification from non-accepted supplies. The solicitation was posted on July 20, 2026, with a response deadline of July 27, 2026, and delivery is required within 20 days after award for a quantity of eight packages.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 5 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334516
New
Federal
Graywolf Sensing Solutions Advanced Sense XM monitor with DSXM-8 Probe KitThe Defense Health Agency Contracting Activity intends to award a sole source Firm-Fixed-Price contract to Graywolf Sensing Solutions for the purchase of specialized air quality monitoring equipment, including the Advanced Sense XM monitor with DSXM-8 Probe Kit, AS-202A Articulating Hotwire Anemometer, and PC-3500 Particle Meter, to support the Defense Centers for Public Health – Aberdeen. Graywolf Sensing Solutions is recognized as the exclusive manufacturer of these instruments, with proprietary software and hardware that restricts maintenance, sensor replacement, and firmware updates to the original vendor exclusively. Third-party procurement would render the equipment incompatible with existing calibration and maintenance protocols, invalidating measurement accuracy and compliance. The equipment is not available through distributors or federal contract vehicles such as GSA, reinforcing the necessity of direct acquisition from the manufacturer. Delivery is scheduled for August 30, 2026, under NAICS code 334516 with a size standard of 1,250 employees. This procurement follows statutory authority 12.102(a) and meets the synopsis requirements of FAR 5.102(a)(6) and 5.203(a). A 15-day window is open for public comment following the July 20, 2026, posting, with responses due by August 5, 2026. No competitive bidding is being conducted, and the contract will be awarded as sole source if no substantive objections are received by the deadline. The sole point of contact for inquiries is Christopher Cook, reachable via email or phone. The equipment will be delivered to Aberdeen Proving Ground, Maryland, and no set-aside provisions apply to this acquisition.
Defense Health Agency (dha)

POSTED

about 10 hours ago

DEADLINE

in 16 days
View Details
NAICS: 334516
New
Federal
193 nm ArF Excimer Laser Ablation SystemArgonne National Laboratory is soliciting offers for a 193 nm ArF Excimer Laser Ablation System under solicitation number 6-S176-Q-00355-00, with an award based on the Lowest Price, Technically Acceptable (LPTA) methodology. The system must be delivered, installed, calibrated, and accompanied by on-site operator training at the laboratory’s facility in Lemont, Illinois, with FOB Destination terms specifying acceptance upon physical receipt at the site. Vendors must submit a comprehensive quotation package including fully completed and signed ANL-70 and ANL-70B forms, the LPTA Addendum, technical documentation proving compliance with all minimum specifications, country of origin certification consistent with FAR 52.225-1 Buy American requirements, and lead time from purchase order receipt to final delivery and installation. Country of origin must meet the thresholds of 65 percent U.S.-made components for deliveries between 2024 and 2028, rising to 75 percent starting in 2029, with components of unknown origin treated as foreign and certain foreign components treated as domestic if not reasonably available domestically. The solicitation requires strict adherence to federal and DOE-specific regulations, including compliance with 10 CFR Part 851, OSHA standards, and environmental and hazardous materials regulations. Contractors must implement counterfeit part prevention, use only authorized supply chains, and ensure all materials meet safety and quality standards. All offerors must register with SAM.gov and provide a Unique Entity ID, and must complete extensive representations and certifications covering socioeconomic status, conflict of interest, contingent fees, child labor, and the use of prohibited telecommunications equipment under FAR 52.204-25 and cybersecurity mandates under FAR 52.204-21. Contractor personnel must undergo safety orientation, complete Job Safety Analysis documentation, and comply with personal identity verification requirements under HSPD-12, including the issuance and return of government-issued credentials to maintain site access. Additional requirements include adherence to whistleblower protections, traffic in persons compliance, and affirmative action obligations for qualifying contractors. The contract includes termination for cause and termination for convenience clauses, and payment is to be processed via check, ACH, wire, or credit card, with specific forms required for wire payments and foreign vendors. No contract value is disclosed, and submission is due by July 23, 2026, to Argonne National
Argonne National Labor - DOE Contractor

POSTED

about 10 hours ago

DEADLINE

in 3 days
View Details
NAICS: 334516
New
Federal
Smart Golden Gate, ZnSe Lenses, and Golden Gate Heated Diamond ATR Top Plate and Heated Temp Controller. Brand Name *OR* Equal.The Chemical Sciences Division at Oak Ridge National Laboratory is seeking the procurement of one Smart Golden Gate with ZnSe Lenses and one Golden Gate Heated Diamond ATR Top Plate with Heated Temperature Controller under solicitation RFQSSPR486592, issued by UT-Battelle, LLC, acting as a DOE contractor. Deliveries are to be made to the facility in Oak Ridge, Tennessee, with all equipment required to meet detailed specifications outlined in Attachment C, the Bill of Materials, though the attachment itself is not provided. The contract includes a brand-name-or-equal provision, and all items must comply with applicable electrical safety standards, requiring NRTL certification or field evaluation. Performance is restricted to U.S. citizens or lawful permanent residents due to federal facility access requirements, and work is subject to DOE-specific regulations including worker safety, nuclear safeguards, and protection against conflict of interest. Contract compliance enforces stringent cybersecurity and data handling protocols, mandating adherence to NIST SP 800-171 for Controlled Unclassified Information and FIPS 140-2 for cryptographic systems, with all personally identifiable information strictly confined within the United States. Contractors must maintain commercial general liability, professional liability, and cyber liability insurance each at $2 million, with carriers rated A-/VIII or better by A.M. Best. Security incident reporting must occur within one hour of discovery, and audit rights extend to all aspects of data handling and compliance. Personnel must undergo Personal Identity Verification, and subcontractors are bound by the same flow-down obligations. Invoicing must be processed through the Ariba Network, and while the contract value is unstated, the Buy American Act applies to purchases exceeding $15,000. No evaluation factors, pricing details, or clear delivery schedule are disclosed, and no formal contracting officer, COR, or COTR information is provided, with all communications directed through the designated procurement point of contact, Scott Scarbrough, at scarbroughws@ornl.gov.
Ornl Ut-Battelle Llc-Doe Contractor

POSTED

about 10 hours ago

DEADLINE

in 4 days
View Details
NAICS: 334516
New
Federal
6640--KIT, 10-TEST, MRSA NXG, IVD, GXThe Department of Veterans Affairs Network 08 Contracting Office is seeking a lease or reagent rental agreement for the Microbiology Department at the Miami VAHCS to support real-time PCR nucleic acid testing for multiple infectious agents including Clostridium difficile including the Epidemic 027 Strain from stool samples, Methicillin Resistant Staphylococcus aureus from nasal swabs, SARS-CoV-2, Influenza A & B and RSV, Group A Streptococcus from throat swabs, and Mycobacterium tuberculosis resistance to Rifampin from sputum. The agreement must cover equipment, service calls including routine maintenance beyond standard user maintenance, reagents, and consumables on a cost-per-kit or cost-per-test basis, and is structured for a base period with up to four optional years. The contract falls under Product Code 6640 Laboratory Equipment and Supplies with a NAICS code of 334516, and all vendors must be authorized distributors with documentation to prove authorization. Responses must be submitted electronically via email to david.henry3@va.gov and must adhere strictly to the requirements outlined in the solicitation package 36C24826Q0764, posted on SAM.gov on or about July 23, 2026, with a firm deadline of August 3, 2026 at 2:00 PM EDT. No paper copies will be mailed, and it is the offeror’s responsibility to monitor SAM for amendments. Vendors must confirm their status as either a manufacturer or nonmanufacturer using clause 852.219-78 if applicable and submit the required certification signed and completed. Only items that are immediately in stock and available for delivery may be quoted, and all quotations must be concise and directly aligned with the specified testing requirements. The place of performance is in Miami, Florida, and inquiries should be directed to the designated Contracting Officer.
248-NETWORK Contract Office 8 (36C248)

POSTED

about 10 hours ago

DEADLINE

in 14 days
View Details

More opportunities from Department Of The Interior → Ofc Of Acquisition Grants-Denver

Same awarding agency

NAICS: 541990
Federal
R--Science and Technical Support Services (STSSC) ForThis procurement is for an indefinite-delivery, indefinite-quantity (IDIQ) contract under solicitation number 140G0226R0003, issued by the Department of the Interior, Office of Acquisition and Grants in Denver, Colorado, to provide comprehensive science and technical support services across multiple divisions including the National Water Quality Laboratory, Earth System Processes Division, and Water Mission Area. The contract is a 100% competitive 8(a) set-aside under NAICS code 541990 with a size standard of $19.5 million, and it is structured to allow for firm-fixed-price and labor-hour task orders over a base period of five years from December 1, 2026, through November 30, 2031, with a possible six-month option extending through May 31, 2032. The estimated ceiling value is $30 million, and offerings must be submitted electronically with full compliance to FAR Part 12 for commercial services and FAR Part 15 for negotiated acquisition processes. Offerors must be registered in SAM, provide their UEI and CAGE code, and submit proposals in four distinct volumes with strict formatting requirements including a 30-page limit for the technical proposal, a mandatory Excel pricing schedule with fully burdened labor rates for all 31 labor categories across the full performance period, and separate submissions for past performance and contract-specific clauses. The scope of work spans 16 major functional areas including program management, research and science, data and information management, geospatial modeling, laboratory operations, LIMS support, warehouse services, quality assurance, and instrument specialist support. Contractors must deliver monthly status reports, scientific outputs such as databases, GIS data, and manuscripts, and perform physical tasks including sample labeling with barcodes, lab inventory management, repacking and shipping of coolers, and coordination of inbound and outbound shipments under FOB destination terms. The contract includes detailed quality control requirements, mandating a government-approved Quality Control Program and adherence to a Quality Assurance Surveillance Plan, with remedies for non-conformance including reperformance at no additional cost or equitable price adjustments. Key personnel must include a Program Manager with PMP certification and proven project management experience, and all service employees must comply with applicable Department of Labor wage determinations, with contractors required to initiate conformance procedures for any unlisted classifications. Evaluation factors are weighted in descending order of importance—with project staffing, management plan, organizational experience, key personnel
All Other Professional, Scientific, and Technical Services

POSTED

7 days ago

DEADLINE

in 7 days
View Details
NAICS: 541380
Federal
Quality Assurance and Cylinder Inspection ServicesThe contract seeks qualified providers to deliver independent quality control services focused on ensuring the accuracy of gas fill levels, the structural integrity of cylinders, and the verification of gas purity, all in strict adherence to federal regulations and the Quality Assurance Surveillance Plan. These services are critical to maintaining compliance with safety and operational standards across federal operations involving compressed gases, and the contractor must demonstrate proven expertise in inspection methodologies that meet or exceed established federal benchmarks. Performance is expected to be consistent, reliable, and fully documented to support audit requirements and regulatory accountability. The contract is classified as a subcontract under NAICS code 541380, indicating it pertains to other scientific and technical consulting services. It was posted on July 10, 2026, with a response deadline of July 29, 2026, and is managed by the Office of Acquisition and Grants in Denver under the Department of the Interior. While specific performance locations and point of contact details are not provided, the work is intended to support federal agency operations requiring certified and traceable quality assurance for gas handling systems. Potential bidders must ensure their capabilities align with the rigorous demands of federal compliance and the specific requirements outlined in the Quality Assurance Surveillance Plan.
Testing Laboratories and Services

POSTED

10 days ago

DEADLINE

in 9 days
View Details
NAICS: 325120
Federal
Specialty Industrial Gas Supply (Cylinders and Dewars)The contract seeks a supplier to provide specialty industrial gases in cylinders, dewars, or other suitable containers to support laboratory and research operations at U.S. Geological Survey facilities within the Denver metropolitan area. The gases are critical for scientific analysis and testing, requiring precise composition, purity, and reliable delivery schedules to maintain uninterrupted experimental workflows. The procurement is structured as a subcontract under NAICS code 325120, which classifies the industry as chemical manufacturing, specifically focusing on industrial gas production and distribution. The solicitation was posted on July 10, 2026, with a firm response deadline of July 29, 2026, at 6:30 p.m. Eastern Time, leaving vendors a limited window to submit proposals that meet technical, safety, and logistical requirements. The awarding agency is the Office of Acquisition and Grants in Denver under the Department of the Interior, with performance expected to be localized within the Denver region to ensure timely and efficient service. Although specific delivery volumes, gas types, or container specifications are not detailed here, the nature of the work implies strict adherence to quality controls, regulatory compliance, and emergency response protocols typical for handling hazardous and high-purity gases in federal scientific environments.
Industrial Gas Manufacturing

POSTED

10 days ago

DEADLINE

in 9 days
View Details