Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

MWIR Thermal Imaging Camera Supply

Active
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Naval Research Laboratory is seeking a subcontract for the procurement of a high-performance FLIR X6983HS mid-wave infrared thermal imaging camera featuring a 640x512 Indium Antimonide detector, a 10GigE/CXP interface, and a 1004Hz frame rate. This system is intended for advanced thermal imaging applications requiring exceptional sensitivity, rapid capture rates, and reliable high-bandwidth data transmission. The contract is classified as a subcontract under NAICS code 334511, which pertains to the manufacturing of commercial and industrial instrumentation, and is aimed at supporting Department of Defense research and development initiatives. Performance of the work is designated for Washington, D.C., with a delivery address of 20375. The solicitation was posted on July 22, 2026, with a tightly constrained response deadline of July 24, 2026, indicating an urgent requirement for qualified vendors capable of delivering certified hardware to precise technical specifications. No set-aside provisions are designated, making the opportunity open to all eligible contractors. The procurement is critical for mission-critical imaging systems, and successful bidders must demonstrate proven capability in supplying high-speed MWIR cameras with the specified detector technology and interface standards. Bidders are required to align their proposals with the technical parameters and delivery expectations outlined in the solicitation to meet the laboratory’s operational and developmental needs.

General Info

Procure FLIR X6983HS MWIR camera with 640x512 InSb, 10GigE/CXP, 1004Hz for DoD R&D in Washington, D.C.

Agency

Department Of Defense → Naval Research LaboratoryView Agency

NAICS

334511 - Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument ManufacturingView NAICS

Place of Performance

Washington, DC, 20375, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

Posted

subcontract

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Naval Research Laboratory
ContactsNo contacts available
OfficeN/A
Organization / Agency
Department Of Defense → Naval Research Laboratory
View Agency Profile
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Procurement of a FLIR X6983HS MWIR camera with 640x512 InSb detector, 10GigE/CXP interface, and 1004Hz frame rate.

Similar Contracts

Same NAICS industry code

NAICS: 334511
New
DIBBS
Precision Manufacturing of NRP Command ModuleThe contract entails the precision manufacturing of three NRP Command Modules identified by NSN 4120016579196, requiring adherence to strict technical specifications that likely involve advanced electronic and mechanical systems. Work must be performed at the New Cumberland facility with a ZIP code of 17070-5002, under the oversight of the Department of Defense's DDSP New Cumberland Facility. The solicitation is classified as a subcontract with no set-aside designation, and it falls under the NAICS code 334511, which corresponds to the manufacturing of navigation, guidance, control systems, and instrumentation. The opportunity was posted on July 22, 2026, with a firm response deadline of August 3, 2026, indicating a narrow window for qualified vendors to submit proposals. All deliverables must meet exacting military standards, and performance is expected to align with the demanding requirements typical of defense-grade components.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 14 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334511
New
DIBBS
Supply of Interface Units (Automated Components)The contract concerns the manufacture and delivery of 205 automated interface units identified by NSN 7025015869193, with strict adherence to military specifications governing design, performance, and quality. Each unit must be properly packaged and labeled in accordance with defense standards, and any applicable hazardous material handling procedures must be followed throughout production and logistics. The work is to be performed under a subcontract, with the place of performance specified as Tracy, California, at ZIP code 95304-5000. The solicitation was posted on July 22, 2026, and bids must be submitted by August 3, 2026. The NAICS code 334511 confirms the nature of the industry as electronic component and product manufacturing. The contracting entity is the Department of Defense under the office of Construction & Equipment T & IFO EQ, though specific point of contact information is not provided. The official solicitation can be accessed via the DIBBS platform using the provided link.
CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

about 14 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334511
New
DIBBS
TRANSDUCER, FORCE LIThis contract, issued under solicitation SPE4A6-26-T-09CB by the Defense Logistics Agency, calls for six units of a force transducer with part number 2586423 and NSN 6615-00-086-7995, supplied by approved vendors including Honeywell International Inc., Aero International LLC, and Moser Screw Machine Products Division. The item is classified as a critical application product and must comply with stringent technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, including specific packaging, marking, and inspection protocols. All supplies must conform to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, with special marking code 03-03 Method 50, and palletization in accordance with DLA packaging requirements. Sampling and inspection follow MIL-STD-1916 or ASQ H1331, Table 1, with zero non-conformances required unless otherwise stated, and attributes are assigned verification levels or AQLs as specified. The contract includes a separate first article test line item requiring one unit to be delivered for testing, with no separate charge assumed unless otherwise cited, and failure to address this line item may result in evaluation under the assumption of no additional cost. Delivery is due within 583 days from contract award, with FOB origin terms, and the item must be shipped to the DLA Distribution Depot at Tinker AFB, Oklahoma. The contract is a total small business set-aside under NAICS code 334511, with cybersecurity requirements governed by CMMC Level 2 self-assessment, though unique identification is waived per customer request. Measuring and test equipment must be calibrated and documented, and all data handling complies with covered defense information rules. The response deadline was July 30, 2026, with award anticipated for delivery starting January 10, 2027, and the original required delivery date set for September 7, 2027.
ASC COMMODITIES DIVISION

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334511
New
DIBBS
RESUSCITATOR, HAND OPERThe contract specifies the procurement of a hand-operated resuscitator designed for infant use, featuring a disposable single-shutter valve system, an integrated handle, and a thin-walled compression bag with a medication port. Each unit is packaged individually in a resealable plastic carrying bag and color-coded for easy identification as infant size, with the entire order consisting of a single package containing twelve units. The device must comply with strict packaging standards, including sealed unit containers that protect against damage and commercial shipping containers suitable for safe delivery by common carriers at the lowest cost to the specified delivery point in APO, 09227-0000. All items must be marked in accordance with Medical Marking Standard No. 1, replacing any prior reference to MIL-STD-129, and copies of this standard are available through DLA Troop Support. The unit of issue is one package containing twelve resuscitators, and the product falls under the NSN 6515-01-610-7720. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, applicable as of the solicitation or award date, whichever controls. Government-specific packaging and identification standards apply, including the removal of government identification from non-accepted supplies, and the contract is subject to RD003, indicating potential defense information coverage. The solicitation was issued under SPE2DS-26-T-260C with a response deadline of July 28, 2026, and requires delivery within 84 days of award.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 14 hours ago

DEADLINE

in 5 days
View Details
NAICS: 334511
New
DIBBS
COMPUTER SUBASSEMBLThis contract pertains to the procurement of computer subassemblies under solicitation SPE8EN-26-T-2652, with a total quantity of 21 units to be delivered FOB origin within 167 days, with a required ship date of January 18, 2027, and an original delivery deadline of November 22, 2026. The item is identified by NSN 7050-01-566-0685 and is associated with specific part numbers from Schneider Electric USA, Inc. and Plainville Electrical Products Company. All supplies must comply with the DLA Master List of Technical and Quality Requirements, which supersede other standards such as ASTM D3951, and packaging must adhere to MIL-STD-129 and RP001 DLA Packaging Requirements. Mercury and mercury-containing compounds are strictly prohibited unless explicitly exempted for functional use in batteries, fluorescent lamps, instruments, sensors, controls, weapon systems, or NAVSEA-specified chemical reagents, with portable mercury-containing devices requiring shockproof construction and a secondary containment barrier per NAVSEA 5100-003D. The contractor must also maintain Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment compliance, and covered defense information may apply, requiring adherence to associated security protocols. Delivery is to be made to DLA Distribution San Diego at the specified address, with no tolerance for quantity variance, and inspection and acceptance occur at the destination. All markings, labeling, and unit of issue must conform to contract specifications, referencing the DLA unit of issue guidelines.
CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

about 14 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334511
New
DIBBS
ARM, POSITION FEEDBAThis contract pertains to the procurement of a single unit of an item identified by NSN 6320013438191 and part number 1819469, designated as ARM, POSITION FEEDBACK, under solicitation SPE4A0-26-T-3991. Delivery is required within five days of contract award, with FOB origin terms and inspection and acceptance performed at the destination. The item must comply with DLA packaging standards per MIL-STD-2073-1E and marking requirements under MIL-STD-129, including the special fragile marking code 01. Packaging and preservation must exclude mercury or mercury-containing compounds entirely, except for specific functional components like batteries or sensors explicitly authorized by NAVSEA, and all preservation methods must adhere to IP056 prohibitions. Supply chain traceability documentation must be retained by the contractor in accordance with DLA Directive Procurement Note C03 from August 2016, though item unique identification is not required. The contractor must employ a zero-defect sampling plan consistent with MIL-STD-1916 or ASQ H1331, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. The delivery destination is Fort Stewart, Georgia, with shipment to be sent by the fastest traceable method, explicitly excluding parcel post, and must be palletized according to DLA packaging requirements. The contractor must also maintain compliance with CMMC Level 2 self-assessment requirements for cybersecurity. Physical identification of the bare item must be performed in accordance with RQ017, and all technical and quality requirements referenced through R or I numbers are governed by the DLA Master List of Technical and Quality Requirements accessible via the DLA website, with revisions controlled by the solicitation issue date. The item is governed by the Department of Defense's Aviation Supply Chain ESOC Buys office, with Danita Davis as the point of contact, and a final delivery deadline of July 17, 2026. No quantity variance is permitted, and all documentation and compliance obligations are binding as specified in the contract’s technical and quality provisions.
AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

about 14 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334511
New
Federal
Spacecraft Integration and Environmental TestingThe contract requires the performance of spacecraft-level integration and environmental testing to verify flight readiness in accordance with NASA standards, specifically including thermal vacuum, vibration, and EMI/EMC testing. These tests are critical to ensuring the spacecraft can endure the extreme conditions of launch and space operations, and all activities must meet rigorous technical and procedural requirements set by the National Aeronautics and Space Administration. The work is designated as a subcontract and is being managed by NASA Langley Research Center, with performance expected at the facility in Hampton. The solicitation was posted on July 22, 2026, and responses are due by September 4, 2026, with the North American Industry Classification System code 334511 indicating applicability to communication equipment manufacturing, though the scope is focused on aerospace system integration and test services.
NASA Langley Research Center

POSTED

about 19 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 334511
New
Federal
Siren Amplifier and RTU Assembly SupplyThe contract entails the supply of two OEM Siren Amplifier and RTU Assemblies, part number 44169, designed to natively interface with the Motorola APX6500 O5 control head and deliver integrated public address and warning tone functionality alongside remote telemetry unit operations. These assemblies are critical components for emergency communication systems and must meet strict interoperability standards to ensure seamless operation within existing radio infrastructure. The procurement is structured as a subcontract under a Total Small Business Set-Aside, indicating that only certified small businesses are eligible to bid, in accordance with FARS 19.5 and the NAICS code 334511 for communication equipment manufacturing. The solicitation was posted on July 22, 2026, with a response deadline of August 10, 2026, at 5:00 PM, and the place of performance is designated as Luke Air Force Base with a ZIP code of 85309. The contracting agency is listed as FA4887 56 Cons Cc under the Department of Defense, though specific point of contact details are not provided. The contract does not include a solicitation number and is accessible via the SAM.gov platform, reflecting its federal procurement nature. All deliverables must be fulfilled in compliance with defense specifications and delivered to meet operational readiness requirements at the specified location.
FA4887 56 Cons Cc

POSTED

about 19 hours ago

DEADLINE

in 18 days
View Details
NAICS: 334511
New
Federal
Supply of FEEDBACK UNIT (P/N 8748-050-OAE, NSN 5998-99-317-5395)The contract requires the manufacture or supply of 15 to 30 mission-critical electronic feedback units with part number 8748-050-OAE and NSN 5998-99-317-5395, under a sole-source justification due to the absence of technical data and the lack of any alternative sources. These units are essential for operational systems with no viable substitutes, making this procurement critical for continued mission readiness. The solicitation is structured as a subcontract with a Total Small Business Set-Aside designation, meaning only small business concerns are eligible to compete, in accordance with FAR 19.5. The North American Industry Classification System code is 334511, indicating the work falls under the manufacturing of electronic components and products. The opportunity was posted on July 22, 2026, with submissions due by August 4, 2026, and performance is to be carried out at Curtis Bay, Maryland, with ZIP code 21226. The contracting office is the SFLC Procurement Branch 3 under the Department of Homeland Security, and while specific contact information is not provided, the opportunity is accessible through the SAM.gov platform. This procurement is time-sensitive and exclusively reserved for small businesses capable of fulfilling the highly specialized technical requirements without access to replacement components or alternative suppliers.
Sflc Procurement Branch 3(00040)

POSTED

about 19 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334511
New
Federal
N0038326PR0R696_FMSNAVSUP WSS Philadelphia is proceeding with a sole source procurement to repair six Direction Finder SE units, identified by NSN 7R 5826 014782375 and part number 622-0902-206, under a Foreign Military Sales program. The repair work is designated as FMS REPAIR and must be performed exclusively by ROCKWELL COLLINS, INC. (CAGE 84T51), the original manufacturer, due to the RMC code "3C" which mandates direct manufacturer involvement. The government has determined that competitive sourcing is not feasible because the technical data required for alternative bids is unavailable, not economically obtainable, and cannot be adequately described in specifications. This procurement is authorized under 10 U.S.C. 2304(c)(1) and FAR 6.302-1, and the sole source designation is formally approved with no alternative suppliers capable of meeting requirement needs. The solicitation is being issued under number N0038326QN124 with a planned issue date of 20 July 2026 and a proposal deadline of 20 August 2026. While this notice is not a formal request for competitive proposals, any responses received within five days of publication will be reviewed to assess potential for competition, though none are expected to satisfy requirements. Only electronic submissions via email to the designated Contract Specialist, Sam Hojnowski, are accepted; no hard copies or phone inquiries will be considered. The procurement is not set aside for small businesses and uses electronic procedures exclusively. Any company not previously approved as a source must submit a Source Approval Request, but the timeline will not be extended to accommodate such submissions. The place of performance is FOB origin, meaning delivery responsibility transfers at the manufacturer’s shipping point.
Navsup Weapon Systems Support

POSTED

about 19 hours ago

DEADLINE

in 29 days
View Details
NAICS: 334511
New
Federal
7G--Special Notice of Intent to Sole Source Award The U.S. Fish and Wildlife Service Communications Branch intends to award a sole source firm fixed price contract to Biomark, LLC for the purchase of PIT tags, citing the need for compatibility with existing interrogator hardware, proprietary software systems, and established Basin-wide standards in the Columbia River Basin. The acquisition falls under the Simplified Acquisition Threshold and is justified under FAR subpart 13.106-1(b)(1)(i) and (ii) due to the exclusive capability of Biomark to provide interoperable equipment and tags, making competitive bidding impractical. The North American Industry Classification System code is 334511, and the Product Service Code is 7G22, reflecting the specialized nature of the equipment required to maintain uninterrupted monitoring operations without disruption or noncompliance. This notice is not a solicitation and does not obligate the government to award a contract; however, any interested party may submit a written statement of capabilities by email, no later than July 28, 2026, to demonstrate that competition would be advantageous to the government. Submissions must be in Microsoft Word or Adobe PDF format and sent exclusively to carter_duke@ios.doi.gov, with no telephone inquiries accepted. Costs incurred in preparing a response are the sole responsibility of the respondent and will not be reimbursed. The contract will be administered under solicitation number DOIFFBO260137, with the point of contact being Carter Duke of the Department of the Interior, and the office located in Falls Church, Virginia.
It Goods Fws

POSTED

about 19 hours ago

DEADLINE

in 5 days
View Details
NAICS: 334511
New
Federal
FLIR X6983HS MWIR CameraThe Naval Research Laboratory intends to award a sole source purchase order to Teledyne FLIR Maritime US, Inc. for the FLIR X6983HS MWIR camera system under solicitation N00173-26-Q-1301392409, using Simplified Acquisition Procedures per FAR Part 13.106-1(b), with a maximum value not exceeding $250,000. This procurement is justified on the basis that only this vendor can meet the specific technical requirements, as no other suppliers offer an equivalent solution that satisfies the agency’s operational needs. The system includes the X6983HS camera with a 640x512 InSb detector, a 50mm macro lens, a 3x microscope, multiple calibration kits covering temperature ranges from -20°C to 600°C, filter holders, a Research Studio software license, and a heavy-duty camera stand. The procurement falls under NAICS code 334511 with a size standard of 1,350 employees and FSC/PSC 6650, and performance is required in Washington, DC. Interested parties have two calendar days from the notice’s publication to demonstrate that competition would be advantageous, but responses will not entitle them to reimbursement or guarantee a competitive procurement. The acquisition does not include formal evaluation factors, pricing details, or contract clauses in the notice, and the government retains full discretion over whether to proceed with sole source selection. Delivery and acceptance will occur at the Government’s location in Washington, DC, with inspection governed by applicable calibration standards and FAR Part 13 requirements, though no specific packaging, labeling, or preservation standards are detailed. All communications must reference the solicitation number and be sent to Marche Hampton at Marche.T.Hampton.civ@us.navy.mil.
Naval Research Laboratory

POSTED

about 19 hours ago

DEADLINE

in 1 day
View Details

More opportunities from Department Of Defense → Naval Research Laboratory

Same awarding agency

NAICS: 332999
New
Federal
Heavy-Duty Camera Mounting StandThe contract is for the supply of a heavy-duty camera mounting stand specifically designed to ensure stable positioning of the FLIR X6983HS system during operational use. It is issued as a subcontract under the Naval Research Laboratory, which operates under the Department of Defense, with a place of performance located in Washington, DC, postal code 20375. The solicitation was posted on July 22, 2026, with a strict response deadline of July 24, 2026, at 11:00 a.m., indicating a narrow window for submissions. The North American Industry Classification System code 332999 identifies the work as falling under other fabricated metal product manufacturing, reflecting the specialized nature of the mounting equipment. The requirement is not subject to any specified set-aside programs, and no point of contact information is provided, suggesting that potential respondents must rely on the official SAM.gov link for further details and submission procedures.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 1 day
View Details
NAICS: 511210
New
Federal
Thermal Imaging Software LicenseThe contract pertains to the acquisition of a Research Studio software license designed for data acquisition, analysis, and reporting specifically tailored for use with the FLIR X6983HS thermal imaging camera. This software license enables advanced processing of thermal data collected by the camera, supporting mission-critical research and operational needs through high-fidelity image analysis and comprehensive reporting capabilities. The software is integral to transforming raw thermal outputs into actionable intelligence for scientific and defense applications. This is a subcontract issued by the Naval Research Laboratory under the Department of Defense with a NAICS code of 511210, indicating classification within software publishing. The opportunity was posted on July 22, 2026, with a response deadline of July 24, 2026, and the place of performance is designated as Washington, DC, with a ZIP code of 20375. The contract does not specify a set-aside classification or organizational type, and while key contact details are omitted, the solicitation is accessible via the SAM.gov platform for official documentation and submission requirements.
Software Publishers

POSTED

about 19 hours ago

DEADLINE

in 1 day
View Details
NAICS: 333318
New
Federal
Filter Wheel and Optical Filters SupplyThe Naval Research Laboratory, under the Department of Defense, is seeking a subcontractor to supply a filter wheel and associated neutral density filters for use in a thermal camera system. The required components include the ID1 ND I0 filter and a blank wheel, both essential for precise optical control in thermal imaging applications. The solicitation is open for responses until July 24, 2026, with proposals due by 11:00 a.m., and the contract is classified under NAICS code 333318, indicating it falls within the instrumentation and related manufacturing sector. Performance of the contract is expected to be centered in Washington, with a zip code of 20375, aligning with the laboratory’s operational location. This effort supports advanced sensor development and requires suppliers to meet technical specifications for optical precision and integration compatibility.
Other Commercial and Service Industry Machinery Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 1 day
View Details
NAICS: 541380
New
Federal
Thermal Calibration ServicesThe Naval Research Laboratory is seeking subcontractor services to provide multiple thermal calibration kits for mid-wave infrared cameras, covering expansive temperature ranges from -20°C to 350°C and 45°C to 600°C, with an additional micro-calibration requirement spanning -10°C to +350°C. These calibration kits must ensure precise and reliable thermal response across the full spectrum of operational temperatures, supporting critical imaging and sensing applications under extreme environmental conditions. The work is scoped to deliver calibrated hardware capable of maintaining accuracy and consistency in high-stakes defense and research contexts. The opportunity is classified as a subcontract with a NAICS code of 541380, indicating specialized scientific and technical consulting services. Responses are due by July 24, 2026, at 11:00 AM, following a posting date of July 22, 2026. Performance is to occur in Washington, DC, at a facility with ZIP code 20375, aligning with the Naval Research Laboratory’s primary operational base. The procurement reflects an urgent need for high-precision calibration solutions to support ongoing advanced sensor development within the Department of Defense, with no set-aside provisions indicated.
Testing Laboratories and Services

POSTED

about 19 hours ago

DEADLINE

in 1 day
View Details
NAICS: 333318
New
Federal
Microscope Attachment for Thermal ImagingThe contract seeks the supply of a specialized 3x microscope attachment with an f/2.5 aperture designed for close-range thermal analysis, specifically engineered to be compatible with the FLIR X6983HS thermal imaging camera and its配套 macro lens. This equipment is critical for high-resolution thermal imaging applications requiring precise temperature mapping at microscopic scales, enabling detailed material and component analysis in controlled environments. The item must meet exact optical and mechanical specifications to ensure seamless integration and optimal performance with the designated thermal imaging system. The contract is issued as a subcontract under the NAICS code 333318, which classifies it within the scientific and industrial instrumentation manufacturing sector, and is managed by the Naval Research Laboratory under the Department of Defense. The proposed place of performance is in Washington, D.C., with a zip code of 20375, indicating the final delivery and integration will occur at or near the laboratory's facility. The solicitation was posted on July 22, 2026, and responses are due by July 24, 2026, creating a tight two-day submission window for qualified vendors. The absence of a set-aside designation suggests this opportunity is open to all eligible contractors without preference for small business or other categories.
Other Commercial and Service Industry Machinery Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 1 day
View Details
NAICS: 333318
New
Federal
Macro Lens Supply for Thermal ImagingThe contract pertains to the supply of a specialized 50mm macro lens designed for compatibility with the FLIR X6983HS thermal imaging system, operating within the 3.0 to 5.0 micrometer infrared spectrum with an f/2.5 aperture and a manual bayonet mount. This optical component is critical for high-resolution thermal imaging in close-proximity applications and must meet precise technical specifications to ensure seamless integration and optimal performance with the designated imaging platform. The lens is intended for use in defense-related thermal imaging tasks requiring enhanced detail and sensitivity in mid-wave infrared conditions. Issued under the NAICS code 333318 for other commercial and service industry machinery manufacturing, the contract is classified as a subcontract and is sponsored by the Naval Research Laboratory under the Department of Defense. The opportunity was posted on July 22, 2026, with a strict response deadline of July 24, 2026, indicating a rapidly accelerating procurement process. The place of performance is designated as Washington, DC, with a ZIP code of 20375, corresponding to the location of the Naval Research Laboratory’s operational facilities. No set-aside status or point of contact information is provided, suggesting the opportunity is open to qualified vendors without preference or restriction beyond technical compliance.
Other Commercial and Service Industry Machinery Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 1 day
View Details
NAICS: 561621
New
Federal
PoE Physical Access Control System ExpansionThe Naval Research Laboratory is seeking quotations for the installation of Hirsch Card Readers and MX1 Panels under a Total Small Business Set-Aside, limited to small businesses with a size standard of $25,000,000 annual revenue, as defined by NAICS code 561621. This solicitation is conducted as a Firm-Fixed-Price procurement using the streamlined procedures of FAR Subpart 12.6, with no written solicitation document issued beyond this notice. All equipment must be new, sourced exclusively from Original Equipment Manufacturers or their authorized dealers, distributors, or resellers, and must be covered by the manufacturer’s warranty; vendors must provide documentation proving their authorized status. The procurement is for brand-name equipment or equal, and remanufactured or gray market items are strictly prohibited. Delivery is required FOB destination to the U.S. Naval Research Laboratory at 4555 Overlook Avenue S.W., Building 49, Washington, DC 20375, with all submissions sent via email to the designated point of contact, Elizabeth Harley. Quotations must include the company’s DUNS number and Cage Code and must explicitly state acceptance of the solicitation’s terms and conditions without modification, or list any exceptions with rationale. Offers will be evaluated under the Lowest Price Technically Acceptable (LPTA) method, where technical acceptability is determined first based on compliance with all specifications in the Statement of Work, followed by price analysis to ensure fairness and reasonableness. Only technically acceptable offers will be considered for award, with selection going to the lowest-priced compliant offer. Offers must be submitted no later than July 29, 2026, at 1:00 PM, and must be sent via email with the solicitation number referenced in the subject line. All respondents must be actively registered in the System for Award Management (SAM) at the time of submission. Maintenance renewals, software licenses, and service agreements must not be backdated and must commence on or after contract award; reinstatement fees must be listed as separate line items. Options will be evaluated in total but do not obligate the Government to exercise them.
Security Systems Services (except Locksmiths)

POSTED

about 19 hours ago

DEADLINE

in 6 days
View Details
NAICS: 332420
New
Federal
CIP Air Pressure TankThe U.S. Naval Research Laboratory is soliciting quotations for a single 2800-gallon ASME-code “U” stamped carbon steel pressure vessel tank, branded as CIP Air Pressure Tank by AA TANKS INC., under a Total Small Business Set-Aside as defined by FAR 19.104-1. The procurement uses the NAICS code 334420 with a small business size standard of 750 employees and falls under FSC/PSC 8120. The tank must meet exact technical specifications including a 600 PSI MAWP operating range from 0 to 400°F, horizontal welded mounting saddles, an interior as-welded finish, exterior primed paint, and specific connection parameters. Only new equipment is acceptable—no remanufactured or gray market items—and all offerings must be sourced from an Original Equipment Manufacturer or an authorized dealer, distributor, or reseller with full OEM warranty and service support. Documentation proving authorized distribution status is mandatory. The contract is Firm-Fixed-Price, and offers must include a clear acceptance of the solicitation terms without modification or a clearly enumerated list of exceptions with rationale. All quotations must be submitted electronically by the deadline of July 24, 2026, at 3:00 PM, referencing solicitation number N0017326Q5826, and must include the vendor’s Cage Code, manufacturer name, and country of origin. The government will evaluate submissions using a Lowest Price Technically Acceptable approach, prioritizing price while ensuring technical compliance. Offers will be screened for technical acceptability in ascending price order until a compliant and fair-priced proposal is identified for award. FOB Destination is preferred, and vendors selecting FOB Origin must provide shipping details including cost, dimensions, and weight. The award will be made to the most advantageous offer based on price and technical conformance, and all respondents must be actively registered in SAM.gov. Maintenance renewals and software licenses must have performance periods starting no earlier than the contract award date, and reinstatement fees must be itemized separately if applicable. The winning vendor will deliver the tank to the specified address at 4555 Overlook Avenue S.W., Building 49, Washington, DC 20375.
Metal Tank (Heavy Gauge) Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 1 day
View Details
NAICS: 811210
New
Federal
Oscilloscope, 1GHz, 4ch Configuration
Electronic and Precision Equipment Repair and Maintenance

POSTED

2 days ago

DEADLINE

in 1 day
View Details
NAICS: 332510
New
Federal
Inconel and Titanium PartsThis solicitation, numbered N0017326Q5244, is a total small business set-aside issued by the Naval Research Laboratory under the Department of Defense for the procurement of Inconel and Titanium parts, specifically classified under NAICS code 332510 with a small business size standard of 750 employees. The procurement is conducted on a Firm-Fixed-Price basis using the Lowes Price Technically Acceptable evaluation method, where offers must first meet all minimum technical requirements as defined in the RFQ specifications to be considered acceptable; failure to meet these requirements renders an offer ineligible regardless of price. The contract involves manufacturing precision components using CNC machining and sheet cutting with a tight tolerance of 0.005 inches (0.13mm) and a surface roughness of 125 μin (3.2 μm Ra), requiring materials such as Titanium Grade 2, INCONEL 625 conforming to API 6A, and MONEL K-500 aged to ASTM B865 standards. Each part must be accompanied by a formal dimensional inspection report and comply strictly with MIL-STD-130 for unique item identification and MIL-STD-129 for shipment and storage labeling, with verification performed using automatic identification technology. Delivery is required by June 30, 2026, to the NRL Marine Corrosion Facility in Key West, Florida, with FOB Destination being the preferred method of shipment. All submissions must be made via email to Richard Key, the designated purchasing agent, and must include a signed and dated SF 1449 form, the company’s DUNS number and CAGE code, and a statement confirming acceptance of all terms and conditions without modification. Offerors must be registered in the System for Award Management (SAM) and comply with applicable clauses including Safeguarding Covered Defense Information, Prohibition of Hexavalent Chromium, Buy American provisions, and prohibitions on acquiring covered telecommunications equipment. Additionally, contractors must adhere to requirements for Electronic Submission of Payment Requests and Receiving Reports via the Wide Area WorkFlow system. The solicitation is open only to small businesses, including HUBZone and Service-Disabled Veteran-Owned Small Businesses, and responses are due by June 8, 2026, at 7:00 AM local time.
Hardware Manufacturing

POSTED

3 days ago

DEADLINE

in 1 day
View Details
NAICS: 334418
New
Federal
Evaluation Computer CardsThe U.S. Naval Research Laboratory is soliciting quotations for Evaluation Computer Cards under a combined synopsis/solicitation numbered N00173-26-Q-1301367512, issued as a Total Small Business set-aside pursuant to FAR 19.502-2(a). This is a Firm Fixed-Price procurement under NAICS code 334418 and FSC/PSC 5998, requiring brand name or equal products as defined by FAR 52.211-6, with all items must be new, covered by the manufacturer’s warranty, and sourced exclusively through an Original Equipment Manufacturer, authorized dealer, distributor, or reseller who can provide full OEM warranty and service support. Offerors must submit documentation proving their authorized status and include their DUNS number and Cage Code with their quotation, which must be sent via email and conform to all solicitation terms without modification unless specifically noted. The delivery address is the Naval Research Laboratory in Washington, DC, with FOB Destination preferred. Responses are due by July 24, 2026, at 11:00 AM EDT, and must be submitted electronically to Marche Hampton at Marche.T.Hampton.civ@us.navy.mil. All offerors must have an active registration in the System for Award Management (SAM) as of the submission deadline. Evaluation will follow the Lowest Price Technically Acceptable method, where quotes are first ranked by price, then assessed for technical acceptability based on meeting all specified requirements. Technically unacceptable offers are eliminated, and the process continues with the next lowest-priced submission until a technically acceptable and fair-priced offer is found. Options, if included, will be evaluated as part of the total price and may render an offer unacceptable if unbalanced. The Government will not conduct discussions or negotiations, and award will be made to the offer deemed most advantageous based on price and technical compliance. Late submissions will be handled per FAR 52.212-1(f), and only emailed responses will be accepted.
Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

3 days ago

DEADLINE

in 1 day
View Details