Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

NARCOTIC CONTROL CABIN

Active
SPE2DH-26-T-5299Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the procurement of one narcotic control cabinet with double locking mechanism, constructed from 22-gauge stainless steel, featuring a triple-bolt wafer lock on the outer door and a single-bolt flat key lock on the inner door, both suspended by piano hinges and pre-mounted on two medical equipment rails (P/N MER-1). The cabinet measures 22.5 inches high, 23.625 inches wide, and 15.750 inches deep, with the unit of issue being each. The NSN is 6530-01-407-4732, and the delivery is required within 84 days after the request order, with the final delivery location designated as APO AE 09227-0000, under FOB destination terms. The solicitation number is SPE2DH-26-T-5299, issued on July 20, 2026, with responses due by July 27, 2026, under the NAICS code 339113 and administered by the Medical Supply Chain FSH of the Department of Defense. The contract specifies stringent compliance with MIL-STD-2073-1E for packaging and preservation and MMS No. 1 for medical item marking, replacing MIL-STD-129 for routine labeling, though MIL-STD-129 remains applicable for radioactive materials. Hazardous materials must conform to OSHA’s Hazard Communication Standard, and any exempted substances must be documented under applicable federal acts. Cybersecurity requirements include compliance with DFARS 252.204-7012, mandating safeguarding of controlled unclassified information per NIST SP 800-171 and timely reporting of cyber incidents. The contractor must adhere to ethical provisions including whistleblower protections, restrictions on compensation of former DoD officials, and prohibitions on the use of covered telecommunications equipment. Invoicing must be submitted electronically through WAWF, and the contractor must provide a unique entity identifier and CAGE code. All offerings must include source and part number details, and the contract incorporates numerous FAR and DFARS clauses governing employment rights, trafficking in persons, employment eligibility, sustainable products, hazardous materials, data disclosure, and subcontractor payment acceleration. The estimated value is approximately $9,682.42 based on historical pricing data for similar items under the

General Info

Narcotic control cabinet with double locks, stainless steel, mounted on medical rails, NSN 6530-01-407-4732, DOD procurement, delivery in 84 days to APO.

Agency

Department Of Defense → MEDICAL SUPPLY CHAIIN FSHView Agency

NAICS

339113 - Surgical Appliance and Supplies ManufacturingView NAICS

Place of Performance

ATTN CL VIII MED REQ PROCES ACT, APO, AE, 09227-0000, US

Set-Aside

NONE

Documents

(1)

RFQ SPE2DH-26-T-5299 Medical Supply Chain

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIIN FSH
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → MEDICAL SUPPLY CHAIIN FSH
View Agency Profile
Office AddressUS
Contacts
Tina Vu
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
NARCOTIC CONTROL CABINET,DOUBLE LOCKING
NARCOTIC CONTROL CABINET, DOUBLE LOCKING
22-GUAGE STAINLESS STEEL CONSTRUCTION. TRIPLE-BOLT
WAFER LOCK ON OUTER DOOR, SINGLE-BOLT WITH FLAT KEY
ON INNER DORR. BOTH DOORS WITH PIANO-HINGE SUSPENSION.
PRE-MOUNTED ONTO TWO (2) MEDICAL EQUIPMENT RAILS
(P/N MER-1). 22.5 IN. HIGH BY 23.625 IN. WIDE BY
15.750 IN. DEEP.
UNIT OF ISSUE: EACH (EA)
,, ,,
..
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
..
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
..
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
..
BIDDER: PLEASE SPECIFY SOURCE AND PART
NUMBER BEING SUPPLIED.
ADEQUATE DATA FOR THE NSN/Part Number: 6530-01-407-4732 Quantity: 1 EA Purchase Request: 7017560078QTY: 1 Delivery: 84 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 339113
New
DIBBS
Supply of Industrial Spectacles (ANSI Z87.1 Compliant)The contract entails the procurement and delivery of 16 units of industrial safety spectacles compliant with ANSI Z87.1 standards, intended for use by government entities under the Department of Defense. The items must meet stringent safety and performance requirements to ensure adequate eye protection in hazardous environments. Delivery is scheduled under FOB Destination terms, with the final destination specified as Duluth, Minnesota, meaning the supplier is responsible for all transportation costs and risks until the goods arrive at that location. The contract is classified as a subcontract under NAICS code 339113, which pertains to the manufacturing of eyewear and vision accessories. It was posted on July 20, 2026, and is managed by the Defense Logistics Agency. No set-aside criteria or specific contracting office details are provided, and no point of contact information is listed within the data.
Defense Logistics Agency

POSTED

about 13 hours ago

DEADLINE

N/A
View Details
NAICS: 339113
New
DIBBS
Supply of Individual Medical and Surgical ComponentsThe contract seeks the manufacture or supply of individual disposable surgical components for use in operating room kits, including armboard covers, drawstring bags, lift sheets, mop heads, table pads, and straps, all meeting standardized medical and surgical requirements. These items are critical for maintaining sterile environments and procedural efficiency in military healthcare settings, and must comply with stringent quality and safety protocols consistent with Department of Defense standards. The solicitation falls under NAICS code 339113, indicating classification within the medical equipment and supplies manufacturing sector, and is structured as a subcontract opportunity within the Medical Supply Chain MD Surg FSF framework. The opportunity was posted on July 20, 2026, with a firm response deadline of July 27, 2026, and the place of performance is designated as FPO with ZIP code 96678-1704, suggesting delivery to overseas or military-operated medical facilities. The contract is managed through the Department of Defense’s Defense Logistics Agency procurement system, and interested parties must submit proposals via the DIBBS portal at the provided UI link. No set-aside provisions or special eligibility requirements are specified, meaning the opportunity is open to all qualified suppliers capable of meeting technical, logistical, and compliance obligations without geographic or size-based restrictions.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 13 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
Operating Room Supply Kit Assembly and PackagingThe contract requires the assembly and packaging of disposable surgical components into complete operating room supply kits, each unitized for a single surgical case and prepared for delivery to military vessels. This work is critical to ensuring that frontline medical teams have properly configured, sterile, and ready-to-use equipment for surgical procedures in deployed or maritime environments. All components must meet strict military standards for quality, sterility, and organization to guarantee operational readiness and patient safety under demanding conditions. The solicitation is issued as a subcontract under the NAICS code 339113, which pertains to medical equipment and supplies manufacturing, and is managed by the Department of Defense through the Medical Supply Chain MD Surg FSF. The response deadline is July 27, 2026, with the place of performance designated as FPO 96678-1704, indicating delivery to a military fleet location. The work must be executed with precision to support the logistical needs of naval operations, ensuring kits are traceable, correctly labeled, and compliant with military supply chain protocols for rapid deployment.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 13 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
Supply of Industrial Safety Goggles (NSN 4240014925722)The contract entails the procurement and delivery of five units of industrial-grade safety goggles identified by NSN 4240014925722 and part number 740-0191, with all units required to fully comply with the cataloged technical and safety specifications. Delivery is to be made FOB destination using a traceable express carrier to ensure secure and timed transit, with proper tracking and documentation throughout the shipping process. The solicitation falls under a subcontract with a NAICS code of 339113, indicating classification within the manufacturing of eyewear and related protective equipment. The awarding agency is the Defense Logistics Agency under the Department of Defense, and the contract was posted on July 20, 2026, with performance details unspecified beyond delivery terms. The transaction is referenced through the DIBBS system under contract number SPE8EJ21D0032 with delivery reference SPE8EJ26F037T and count 58835.
Defense Logistics Agency

POSTED

about 13 hours ago

DEADLINE

N/A
View Details
NAICS: 339113
New
DIBBS
Medical Device Component Supply (Suction Device & Catheter)The contract secures the supply of NSN-traceable disposable suction devices and suction catheters for integration into military medical kits, ensuring standardized, reliable equipment for field medical operations. The requirement is specific to components that meet stringent military traceability standards, emphasizing product consistency, sterility, and compliance with defense logistics protocols. The North American Industry Classification System code 339113 indicates the focus on medical equipment and supplies manufacturing, aligning with defense-grade production capabilities. The solicitation is issued as a subcontract under the Department of Defense’s Medical Supply Chain, with a response deadline seven days after the posting on July 20, 2026. All suppliers must be prepared to deliver NSN-traceable units that can be accurately accounted for within the DoD’s supply chain management system. The place of performance and point of contact details are unspecified, suggesting fulfillment may occur across multiple locations under centralized logistics oversight, with the primary objective being seamless integration into established military medical kits without disruption to field readiness.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 13 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
Dental Separating Discs SupplyThe contract entails the supply of 100 units of boxed dental separating discs composed of aluminum oxide, engineered to meet precise dimensional and material standards required for professional dental procedures. These discs are intended for use in dental applications where accurate separation of teeth is necessary, and the material specification ensures durability, precision, and compatibility with clinical environments. The items must be packaged in boxed units ready for immediate deployment and must adhere to strict quality controls aligned with industry expectations for medical-grade dental instruments. The solicitation is classified as a subcontract under NAICS code 339113, which corresponds to surgical and medical instrument manufacturing, and is issued by the Department of Defense through the Medical Supply Chain FSH. The posting date is July 20, 2026, with a response deadline of July 27, 2026, leaving a seven-day window for proposals. The place of performance is designated as FPO with ZIP code 96672-4090, indicating delivery to a military postal facility, likely supporting overseas or deployed medical operations. No set-aside provisions are specified, meaning the opportunity is open to all eligible contractors, and the official solicitation can be accessed via the provided DIBBS link for submission details and technical requirements.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 13 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
Medical Kit Assembly and PackagingThe contract requires the assembly and packaging of medical components into unit-issued BASIC CORPSMAN KITS, ensuring full traceability and strict adherence to technical specifications. All activities must comply with established military and medical standards to guarantee functionality, safety, and readiness for field deployment. The work falls under NAICS code 339113, indicating specialization in medical equipment and supplies manufacturing, and is structured as a subcontract under the Defense Logistics Agency, part of the Department of Defense. The contract was posted on July 20, 2026, and is associated with contract number SPE2DS26P2539, though no specific place of performance or organizational details are provided. The requirement emphasizes rigorous quality control, documentation, and accountability throughout the entire assembly and packaging process to support operational medical needs. While the location and point of contact are unspecified, performance is expected to meet the high compliance benchmarks mandated by the Department of Defense for critical medical logistics.
Defense Logistics Agency

POSTED

about 13 hours ago

DEADLINE

N/A
View Details
NAICS: 339113
New
DIBBS
Supply of Industrial Safety SpectaclesThe contract entails the procurement and delivery of five industrial-grade safety spectacles that meet implied military or ANSI Z87.1 safety standards, ensuring compliance with rigorous protective eyewear requirements. The items are to be shipped FOB destination to Fort Bragg, North Carolina, with a firm delivery deadline of September 18, 2026. This is a subcontract under the Department of Defense, specifically managed by the Defense Logistics Agency, and falls under NAICS code 339113, which pertains to the manufacturing of medical and dental equipment and supplies, indicating the precision and regulatory standards expected in production. The solicitation was posted on July 20, 2026, and the contract reference is tied to DLA’s procurement system, though no specific set-aside or organizational type is specified, suggesting it is open to qualified general contractors. Delivery terms and certification compliance are central to meeting operational readiness needs at the installation.
Defense Logistics Agency

POSTED

about 13 hours ago

DEADLINE

N/A
View Details
NAICS: 339113
New
DIBBS
Industrial Safety Spectacles SupplyThe contract pertains to the supply of 30 units of industrial safety spectacles that must meet either ANSI Z87.1 or military safety standards, ensuring compliance with rigorous protective eyewear requirements for defense personnel. The items must be properly packaged and labeled to facilitate secure handling and accurate identification upon arrival at Fort Bragg, North Carolina, the designated place of delivery. This agreement is classified as a subcontract under the NAICS code 339113, which corresponds to the manufacturing of optical goods, and is administered by the Defense Logistics Agency on behalf of the Department of Defense. Though solicitation details and specific point of contact information are not provided, the contract was posted on July 20, 2026, and is accessible through the DIBBS system for award tracking and procurement transparency.
Defense Logistics Agency

POSTED

about 13 hours ago

DEADLINE

N/A
View Details
NAICS: 339113
New
DIBBS
Supply of Industrial Safety Goggles (NSN 4240014925725)The contract entails the supply and delivery of two pairs of industrial lens goggles identified by NSN 4240014925725, manufactured to meet military specifications for performance and durability. These goggles must be properly packaged and labeled in accordance with regulatory standards to ensure operational readiness and traceability. The delivery is to be made on a FOB destination basis directly to the USS PRINCETON CG 59, indicating that the seller is responsible for all shipping costs and risks until the items reach the designated military vessel. The procurement is classified as a subcontract under the NAICS code 339113, which pertains to sporting and athletic goods manufacturing, though the end use is for military safety applications. The contract was issued by the Defense Logistics Agency on behalf of the Department of Defense, with a posted date of July 20, 2026, indicating a future performance timeline.
Defense Logistics Agency

POSTED

about 13 hours ago

DEADLINE

N/A
View Details
NAICS: 339113
New
DIBBS
Supply of Sterile Polyethylene Transfer PipetsThe contract seeks the supply of sterile, disposable, graduated polyethylene transfer pipets, each with a capacity of 1 mL and a length of 15 cm, in individually packaged units. A total of 2000 units per case are required, and all items must comply with military packaging standards and hazardous materials regulations to ensure safe handling, storage, and transportation. The products are intended for use in controlled medical environments where sterility and precision are critical. The solicitation is issued under the NAICS code 339113, indicating classification within the medical equipment and supplies manufacturing sector, and is structured as a subcontract opportunity through the Department of Defense’s Medical Supply Chain organization. The request for quotation is accessible via the DIBBS portal, with a posting date of July 20, 2026, and a response deadline of July 27, 2026. Delivery and performance are to be completed at FPO, ZIP code 34092, which is a military postal address typically used for overseas or deployed operations. There is no specified set-aside classification, meaning the contract is open to all eligible vendors without preference for small businesses or other categories. All offerors must meet or exceed the technical specifications for sterility, packaging, and compliance with military standards to qualify for award.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 13 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
Manufacturing of Single-Use Instant Heat PadsThe contract seeks the manufacture of single-use instant heat pads designed to activate and maintain a precise temperature of 112°F, intended for medical applications. Each pad must be securely sealed to ensure sterility and function reliably under clinical conditions, meeting established medical safety standards and defined shelf-life requirements to guarantee efficacy prior to use. Production must adhere to strict quality controls consistent with FDA and DoD medical device regulations, including material sourcing, packaging integrity, and traceability throughout the supply chain. This is a subcontract opportunity under the NAICS code 339113, managed by the Department of Defense through the Medical Supply Chain FSH office, with a response deadline of July 27, 2026. The pads are intended for distribution within military and federal healthcare systems, requiring full compliance with defense and medical regulatory protocols. The place of performance and point of contact details are not specified, but bidders must be prepared to meet all technical, logistical, and compliance obligations outlined by the Defense Logistics Agency’s procurement system.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 13 hours ago

DEADLINE

in 6 days
View Details

More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIIN FSH

Same awarding agency

NAICS: 484220
New
DIBBS
Logistics and Delivery CoordinationThis contract requires precise coordination of time-sensitive FOB Destination deliveries for hazardous material shipments, with all deliveries required to be completed within 20 days of award. Compliance with Department of Defense standards is mandatory, including adherence to all regulatory documentation and real-time tracking protocols for hazardous cargo. The work falls under NAICS code 484220 and is categorized as a subcontract within the Medical Supply Chain FSH organization under the Department of Defense. Performance is designated to take place at FPO with ZIP code 09588, indicating operations may involve overseas or military post locations. Responses must be submitted by the deadline of July 27, 2026, following the solicitation posted on July 20, 2026, with no set-aside designation specified, leaving eligibility open to qualified bidders regardless of business size or certification status.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 13 hours ago

DEADLINE

in 6 days
View Details
NAICS: 541690
New
DIBBS
Hazardous Materials Compliance & Labeling ServicesThe contract seeks providers to deliver regulatory compliance services specifically tailored to hazardous materials labeling, safety data sheet preparation, and MIL-STD-129 marking for military shipments. These services are critical to ensuring adherence to federal and Department of Defense standards for the safe handling, transport, and identification of hazardous substances within the military supply chain. The contractor will be responsible for accurately documenting and marking hazardous materials to meet mandated regulatory requirements and to support seamless logistics operations across Department of Defense channels. The work is categorized under NAICS code 541690 and is structured as a subcontract with a response deadline of July 27, 2026. Performance is required at FPO, ZIP 09588, which indicates delivery to military postal addresses typically used for overseas or expeditionary locations. The solicitation originated from the Medical Supply Chain FSH under the Department of Defense, emphasizing the importance of precision and compliance in medical and logistical contexts involving hazardous material shipments. All deliverables must align with current Department of Defense and federal transportation regulations to avoid operational delays or safety violations.
Other Scientific and Technical Consulting Services

POSTED

about 13 hours ago

DEADLINE

in 6 days
View Details
NAICS: 334510
New
DIBBS
Supply of CO₂ Gas Analyzer Measuring TubesThe contract requires the manufacture and supply of 14,000 packages of glass measuring tubes specifically designed for use in CO₂ gas analyzers with a measurement range of 100 to 3000 parts per million. Each tube must feature melted tips to ensure precision and safety during use, and all items must strictly comply with the National Stock Number NSN 6630121893126 and the military packaging standard MIL-STD-129 to ensure uniformity, traceability, and durability in defense logistics. The products are intended for military medical applications and must meet exacting technical and packaging specifications to support reliable operation in field and facility environments. The solicitation, posted on July 20, 2026, with a response deadline of July 27, 2026, is structured as a subcontract under the NAICS code 334510, which classifies it within the Instrument and Laboratory Equipment Manufacturing sector. The contracting activity is managed by the Department of Defense through the Medical Supply Chain FSH, with performance required to be delivered to FPO, ZIP 09588. Although no specific point of contact is listed, the official solicitation can be accessed via the DIBBS portal, indicating this is part of a broader defense procurement process intended to maintain and resupply critical analytical equipment for medical monitoring systems.
Electromedical and Electrotherapeutic Apparatus Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 6 days
View Details
NAICS: 331492
New
DIBBS
Supplier of Nickel-Titanium Alloy for Medical DevicesThe contract seeks a supplier capable of providing medical-grade nickel-titanium (NiTi) alloy specifically for the manufacture of endodontic rotary files, with stringent requirements for full traceability throughout the material’s production lifecycle and mandatory biocompatibility certification to ensure safety for human use. The alloy must meet exacting medical standards to support precision dental instruments used in root canal procedures, with all documentation and quality controls verified and maintained to comply with regulatory expectations for implantable medical devices. The material must be consistently produced under certified processes to guarantee mechanical properties, shape memory characteristics, and corrosion resistance critical to the performance and reliability of the final product. This is a subcontract opportunity posted under the Department of Defense’s Medical Supply Chain FSH, with a response deadline of July 27, 2026, and a NAICS code of 331492 indicating classification under other fabricated metal product manufacturing. The place of performance is designated as FPO, ZIP 96672-4090, indicating potential delivery to military medical facilities or defense-contracted manufacturers. Although no point of contact or set-aside details are provided, the solicitation number SPE2DH26T5305 and public DIBBS portal link confirm the formal procurement process, requiring bidders to submit proposals that fully address documentation, compliance, and supply chain integrity to qualify for award.
Secondary Smelting, Refining, and Alloying of Nonferrous Metal (except Copper and Aluminum)

POSTED

about 13 hours ago

DEADLINE

in 6 days
View Details
NAICS: 493190
New
DIBBS
Packaging, Labeling, and Logistics Support for Medical ShipmentsThe contract requires the provision of DoD-compliant packaging, labeling, and logistics services for medical supplies destined for naval hospital ships, ensuring full adherence to MIL-STD-2073-1E and DLA RP001 standards. All packaging and labeling procedures must meet stringent military specifications for durability, traceability, and environmental resilience to support operational readiness in maritime environments. The services encompass end-to-end logistics management, including inbound receipt, storage, consolidation, outbound preparation, and shipment coordination to a FPO address with ZIP code 96672-4090, with performance centered on maintaining the integrity and timely delivery of critical medical assets. This is a subcontract under the Department of Defense, classified under NAICS code 493190, and was posted on July 20, 2026, with a response deadline of July 27, 2026. The contract is managed by the Medical Supply Chain FSH office and targets vendors capable of supporting the unique demands of naval medical logistics, including strict compliance with federal defense regulations and the ability to operate within the constraints of maritime deployment timelines and conditions. No set-aside designation is specified, and the point of contact details are not provided, with all submissions and inquiries directed through the designated DIBBS platform link.
Other Warehousing and Storage

POSTED

about 13 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339112
New
DIBBS
Supply of Endodontic Rotary Files (Protaper Gold Rotary Finishing Files)The contract solicits the manufacture and supply of FDA-compliant endodontic rotary finishing files constructed from nickel-titanium alloy, specifically Protaper Gold Rotary Finishing Files, for use in root canal treatments aboard U.S. military hospital ships. These instruments must meet stringent medical device regulations and be suitable for high-precision dental procedures in a deployed maritime environment, ensuring reliable performance under field conditions. The deliverables are intended to support the dental care mission of the Department of Defense, with performance required at the FPO address 96672-4090, indicating shipment to naval vessels operating in the Pacific region. This is a subcontract opportunity under NAICS code 339112, which classifies it within the medical equipment and supplies manufacturing sector, and is being managed by the Medical Supply Chain FSH under the Department of Defense. The solicitation was posted on July 20, 2026, with responses due by July 27, 2026, leaving a limited seven-day window for qualified manufacturers to submit proposals. Bidders must ensure compliance with FDA standards, military specifications for medical devices, and the logistical requirements of delivering sensitive dental instruments to remote, mobile medical facilities. While no set-aside provisions are indicated, participation is open to all eligible subcontractors capable of meeting the technical, regulatory, and delivery timelines.
Surgical and Medical Instrument Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 6 days
View Details
NAICS: 488999
New
DIBBS
FOB Destination Delivery and LogisticsThe contract requires end-to-end logistics and delivery services to APO AE 09227-0000 in Kaiserslautern, Germany, under FOB Destination terms, meaning the vendor assumes full responsibility for transportation, customs, and delivery costs until the goods reach the final destination. The delivery must be completed in compliance with all international shipping regulations and military receipt protocols, with ownership and risk transferring only upon arrival at the assigned APO address. The NAICS code 488999 indicates this is a specialized logistics support service outside standard freight categories, likely involving secure, tracked, and time-sensitive transport for Department of Defense medical supply needs. This subcontract is issued by the Medical Supply Chain FSH under the Department of Defense and was posted on July 20, 2026, with a response deadline of July 27, 2026. The place of performance is strictly defined as the APO box address, requiring precise alignment with U.S. military postal guidelines for overseas delivery. No specific set-aside provisions are listed, and the procuring office information is incomplete, but the solicitation number SPE2DH26T5299 and official DIBBS platform link confirm its legitimacy within federal contracting systems. Vendors must ensure complete compliance with all military logistics standards, including documentation, tracking, and delivery confirmation, as failure to meet FOB Destination requirements may result in rejection or financial liability.
All Other Support Activities for Transportation

POSTED

about 13 hours ago

DEADLINE

in 6 days
View Details
NAICS: 541512
New
DIBBS
Cybersecurity Compliance for Controlled Unclassified Information (CUI)The contract requires implementation of NIST SP 800-171 safeguards to protect Controlled Unclassified Information (CUI) and the ongoing maintenance of cyber incident reporting capabilities as mandated by DFARS 252.204-7012. This subcontract is focused on ensuring that all systems and processes handling CUI meet federal cybersecurity standards, including the deployment of technical, administrative, and physical controls to prevent unauthorized access, disclosure, or alteration of sensitive information. Continuous compliance is expected, with immediate reporting of any cyber incidents affecting CUI in accordance with federal requirements. The solicitation is issued under the NAICS code 541512 for Computer Systems Design Services and is tied to the Department of Defense through the Medical Supply Chain FSH. Performance is to be conducted at APO, ZIP 09227-0000, indicating potential deployment in a military or overseas operational environment. The response deadline is set for July 27, 2026, with the posting date of July 20, 2026, indicating a tight seven-day window for submission. The contract is structured as a subcontract, emphasizing its role within a broader defense or federal supply chain framework, and all participating entities must be prepared to demonstrate rigorous adherence to CUI protection protocols and incident response protocols without exception.
Computer Systems Design Services

POSTED

about 13 hours ago

DEADLINE

in 6 days
View Details
NAICS: 541620
New
DIBBS
Hazardous Materials Handling and DocumentationThe contract requires strict adherence to OSHA’s Hazard Communication Standard for all hazardous materials involved in cabinet production or preservation processes, ensuring proper labeling, safety data sheets, and employee training are maintained throughout operations. The work is classified as a subcontract under NAICS code 541620 and is managed by the Department of Defense through its Medical Supply Chain FSH entity, with the place of performance located at APO 09227-0000. All activities must comply with federal safety regulations concerning the identification, handling, and documentation of hazardous substances to protect worker health and ensure regulatory compliance. The solicitation was posted on July 20, 2026, with a response deadline of July 27, 2026, indicating a tight turnaround for submissions. There is no set-aside designation specified, and the contract does not include a point of contact, suggesting potential reliance on the DIBBS portal for correspondence. Contractors are expected to demonstrate robust systems for managing hazardous material documentation and safety protocols as part of their proposal, with full compliance mandatory for contract execution. The work is tied to military medical supply logistics, implying that any noncompliance could impact broader defense operations.
Environmental Consulting Services

POSTED

about 13 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339999
New
DIBBS
Medical Item Labeling and Marking ComplianceThis contract requires compliance with Medical Marking Standard No. 1 for the labeling and marking of durable medical items, effectively replacing the outdated MIL-STD-129 standard for all medical-related applications. The work involves applying precise, durable markings to ensure accurate identification, tracking, and inventory management within the military medical supply chain, adhering strictly to the new standard’s technical and logistical requirements. All subcontractors must ensure their marking processes meet the specified durability, legibility, and format criteria to support seamless integration into existing defense medical logistics systems. The contract is issued under NAICS code 339999 for other miscellaneous manufacturing and is classified as a subcontract within the Department of Defense’s Medical Supply Chain FSH framework. Responses are due by July 27, 2026, with a posted date of July 20, 2026, indicating a tight seven-day window for submission. Performance is expected to occur at APO 09227-0000, underscoring the global nature of the supply chain and the need for consistent marking standards across forward-deployed and expeditionary medical environments. Participation requires full understanding and implementation of the new standard without reliance on legacy military specifications.
All Other Miscellaneous Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 6 days
View Details
NAICS: 561910
New
DIBBS
Military-Grade Packaging and Preservation ServicesThe contract requires the provision of packaging and preservation services for narcotic control cabinets in strict compliance with MIL-STD-2073-1E standards to ensure resilience and functionality throughout military logistics operations. The work must safeguard sensitive medical equipment against environmental degradation, physical damage, and contamination during transport and storage, meeting the rigorous durability requirements mandated by the Department of Defense. The packaging must preserve the operational integrity of the cabinets and support long-term storage under varied climatic and logistical conditions typical of military supply chains. This subcontract is issued under the NAICS code 561910 and is designated for performance at APO 09227-0000, reflecting its alignment with deployment-focused logistics networks. The solicitation was posted on July 20, 2026, with responses due by July 27, 2026, indicating a tight turnaround for qualified vendors to submit proposals. The procurement is managed by the Medical Supply Chain FSH under the Department of Defense, emphasizing the critical nature of the packaged items in maintaining secure, controlled medical protocols in operational environments. All subcontractors must demonstrate proven expertise in military-grade packaging systems and full adherence to federal preservation standards without deviation.
Packaging and Labeling Services

POSTED

about 13 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339920
New
DIBBS
Supply of Narcotic Control Cabinets (Double Locking)The contract is for the procurement and delivery of narcotic control cabinets featuring double locking mechanisms that meet both military and medical standards, ensuring secure storage of controlled substances in high-sensitivity environments. The items must comply with stringent regulatory requirements to safeguard against unauthorized access, tampering, or diversion, making them essential for secure pharmaceutical handling within military medical facilities. The cabinets are intended for use at a U.S. military installation located at APO with a ZIP code of 09227-0000, indicating deployment in overseas or expeditionary medical settings where strict control protocols are mandated. This is a subcontract issued under NAICS code 339920, specifically for other medical and dental equipment manufacturing, and is managed by the Department of Defense through the Medical Supply Chain FSH. The solicitation was posted on July 20, 2026, with responses due by July 27, 2026, providing a standard seven-day window for bids. Interested parties must submit proposals by the deadline through the DIBBS portal, as no point of contact or set-aside specifications are provided, and the award will likely be based on compliance with technical requirements, security certifications, and delivery timelines rather than cost alone, given the critical nature of the equipment for patient safety and regulatory adherence.
Sporting and Athletic Goods Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 6 days
View Details