Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

NASPO ValuePoint RFP NVP_AS26-68 UT Walk-In Building Supplies

Active
NVP_AS26-68State & Local

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The NASPO ValuePoint Request for Proposal NVP_AS26-68 for Walk-In Building Supplies was issued by the State of Utah with a posted date of August 3, 2026, and a response deadline of September 10, 2026. The solicitation aims to establish Master Agreements with qualified suppliers to leverage the combined purchasing power of state and local government entities across the country, including departments, agencies, institutions of higher education, school districts, counties, cities, the District of Columbia, and U.S. territories, provided they comply with their local procurement regulations and receive approval from their chief procurement official. The goal is to secure best value pricing and terms that surpass what individual entities could achieve on their own through collective demand. Although the solicitation is administered under Utah’s procurement system, the designated contracting authority listed is the Comptroller of Public Accounts in Texas, with Sara Van Bergen serving as the primary point of contact. The RFP is accessible via Utah’s BonfireHub portal and the NASPO ValuePoint website, but official communications must be directed to Ann Schliep, Procurement Manager at the State of Utah. The contract will cover a broad range of walk-in building supplies and is structured to allow eligible public entities nationwide to access the resulting agreements, with all terms, pricing, and compliance requirements subject to change and verified through the official RFP portal.

General Info

Utah issues NASPO RFP for nationwide walk-in building supplies contract with Texas as contracting authority.

Agency

Texas → Comptroller of Public Accounts

NAICS

444180 - Other Building Material DealersView NAICS

Place of Performance

TX, US

Set-Aside

NONE

Documents

(1)

ESBD_545162_1785793573462_00 - RFP Overview.docx

DOCX

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyTexas → Comptroller of Public Accounts
Contacts1 person available
OfficeTX, US
Organization / Agency
Texas → Comptroller of Public Accounts
Office AddressTX, US

Full Description

Show more
The NASPO ValuePoint Request for Proposal (RFP) for Walk-In Building Supplies was released by the State of Utah on July 31, 2026. The RFP number is AS26-68. The purpose of this Request for Proposal (RFP) is to establish Master Agreements with qualified bidders. The objective of this RFP is to obtain best value, and in some cases achieve more favorable pricing, than is obtainable by an individual state or local government entity because of the collective volume of potential purchases by numerous state and local government entities.The Master Agreement(s) resulting from this procurement may be used by state governments (including departments, agencies, institutions), institutions of higher education, political subdivisions (i.e., colleges, school districts, counties, cities, etc.), the District of Columbia, territories of the United States, and other eligible entities subject to approval of the individual chief procurement official and compliance with local statutory and regulatory provisions.The RFP is available on Utah's procurement system website using the following link: https://utah.bonfirehub.com/opportunities/247192 or the NASPO ValuePoint website at: https://www.naspovaluepoint.org/solicitations/. Important Dates:Dates and deadlines are subject to change. Offerors should continue checking the RFP Website for the most up-to-date information.RFP Contact:Ann Schliep, Procurement Manager State of Utahaschliep@utah.gov*Direct all communications to the State of Utah

Similar Contracts

Same NAICS industry code

NAICS: 444180
New
DIBBS
CHASSIS, ELECTRICAL-
Solicitation # SPE4A6-26-T-12EU
The contract pertains to the procurement of a chassis, electrical-electronic equipment identified by NSN 5975-01-626-6335 and part number CCHA42255-2, with a single unit required and a total price based on a unit cost of one dollar. Delivery is due within 171 days from the contract date, with shipment to be FOB origin, and the product must be delivered to the DLA Distribution facility in New Cumberland, Pennsylvania. Packaging and marking must strictly comply with MIL-STD-2073-1E and MIL-STD-129, including specific preservation methods and prohibited materials such as ozone-depleting substances and mercury compounds, which are forbidden in all manufacturing, cleaning, packaging, or preservation processes unless exempted as commercial items or part-numbered-only components. All packaging and palletization must adhere to DLA’s procurement requirements, and no government identification may be removed from rejected supplies. Contractors proposing substitutions or administrative part number changes must submit documentation from the approved manufacturer for prior engineering approval. The item is subject to the DLA Master List of Technical and Quality Requirements, with revisions governed by the solicitation issue date. The required delivery date is January 28, 2027, with a need ship date of January 31, 2027, under solicitation SPE4A6-26-T-12EU, issued by the Department of Defense’s ASC Commodities Division.
ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 444180
New
DIBBS
CLAMP, CABLE, ELECTRI
Solicitation # SPE7M5-26-T-366W
The contract pertains to the procurement of two electrical cable clamps with part number 620FS003NF10 and NSN 5935-01-624-8720, supplied by Glenair, Inc. Delivery is required within 20 days to RAF Lakenheath, United Kingdom, under FOB origin terms with no tolerance for quantity variance. The items must comply with MIL-STD-2073-1E packaging standards and be marked in accordance with MIL-STD-129, without any special marking codes. Packaging must adhere to DLA packaging requirements, and the use of any Class I ozone-depleting substances in manufacturing or processing is strictly prohibited unless explicit written approval is obtained from the contracting officer; this restriction does not apply to commercial items as defined by FAR 11.001. Inspection and acceptance occur at the destination, and the shipment must follow DLA transport procedures noted in C19 and C20 with aRDD identifier of 777. The contract references the DLA Master List of Technical and Quality Requirements, with compliance governed by the version in effect on the solicitation issue date. The unit of issue is each, priced at $2.00 per unit, totaling $4.00 for the order. The solicitation was posted on August 4, 2026, with a response deadline of August 17, 2026, and is managed by the Department of Defense’s Active Devices Division through Margaret Smith, with the primary point of contact provided.
ACTIVE DEVICES DIVISION

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 444180
New
DIBBS
PIN PLUG BASE KIT
Solicitation # SPE7M5-26-T-350A
The contract is for the procurement of a PIN PLUG BASE KIT with NSN 5935016296064 and part number 78535-100674, issued by the Department of Defense’s Active Devices Division under solicitation SPE7M5-26-T-350A. The total contract value is $565 for a single unit of one kilogram (KT), with delivery required within 20 days after order issuance to the freight shipping address in Brooklyn, New York. The item is classified as a Type 2 (Code 1) with a shelf life of three months, extendable, and must be preserved using the CLNG/DRY method per MIL-STD-2073-1E packaging standards. Packaging and marking must adhere strictly to MIL-STD-129, including special marking code ZZ for unique requirements, and palletization must follow DLA’s RP001 guidelines. Transportation must be conducted by the fastest traceable means, explicitly prohibiting parcel post, and sea shipments must comply with U.S.-flag vessel requirements. The contract incorporates multiple FAR and DFARS clauses addressing procurement integrity, cybersecurity, hazardous materials, worker rights, and compliance with NIST SP 800-171 for safeguarding defense information, with several deviations applied to standard clauses to reflect updated policies. Inspection and acceptance occur at the delivery point, and all payments must be processed electronically through WAWF. Offerors must be registered in SAM.gov, provide correct UEI and CAGE codes, and affirm their small business status if applicable, while also certifying compliance with prohibitions on Chinese military-linked equipment and the use of hexavalent chromium. The solicitation requires electronic submission via DIBBS and imposes no page limits, but mandates adherence to all referenced standards and regulatory clauses without exception.
ACTIVE DEVICES DIVISION

POSTED

1 day ago

DEADLINE

in 2 days
View Details
NAICS: 444180
New
DIBBS
SWITCH ASSEMBLY
Solicitation # SPE7M8-26-T-5690
The contract pertains to the procurement of a single SWITCH ASSEMBLY with NSN 5930-01-643-6049 and part number QMGRD0196-A1, issued under solicitation SPE7M8-26-T-5690 by the Department of Defense’s Electrical Devices Division. The item must be delivered in one unit within 20 days of contract award, FOB destination, with no tolerance for quantity variance, and is subject to inspection and acceptance at the delivery point. Packaging and preservation must strictly comply with MIL-STD-2073-1E, MIL-DTL-28786 for switches, and MIL-STD-129 for marking, with no special marking required. The supply is prohibited from containing Class I ozone-depleting chemicals, and any substitute chemicals must be pre-approved unless explicitly authorized. All packaging and palletization must adhere to DLA’s official packaging requirements, and the item must be shipped to the USS ABRAHAM LINCOLN CVN 72 at FPO AE 09520 under vessel shipment protocols. Transportation logistics follow specific DLAD procedural notes, and the contract requires use of the DLA unit of issue standard. The original required delivery date is July 22, 2026, and the solicitation response deadline is August 13, 2026. Covered defense information provisions may apply, and all technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced in the contract.
ELECTRICAL DEVICES DIV

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 444180
New
SLED
AS26-68 Walk-In Building Supplies - NASPO ValuePoint RFP
Solicitation # AS26-68
The state of Utah, in partnership with the NASPO ValuePoint cooperative purchasing program, is re-soliciting proposals for the Walk-In Building Supplies portfolio, which is set to expire on July 31, 2027. This solicitation seeks to establish one or more master agreements that allow participating public entities—including states, cities, counties, and municipalities—to make convenient retail purchases of building supplies at discounted rates, with the discount applied at the point of sale. The contract will have a five-year term, during which vendors must guarantee their stated minimum discount percentage. While national coverage is preferred, vendors offering products in only one or a few states may still be considered for state-specific awards, provided they meet the technical evaluation threshold of 600 points as outlined in the evaluation plan. Multiple contract awards are anticipated based on this scoring system. Proposals must be submitted exclusively through the U3P Platform (Bonfire), with no acceptance of email or postal submissions. The solicitation number is AS26-68, and the response deadline is September 10, 2026. The primary point of contact for the solicitation is Ann Schliep of the Utah agency, reachable via email at aschliep@utah.gov. The contract will be administered through Utah’s procurement system but will be available to all eligible participants enrolled in the NASPO ValuePoint program across the country. Vendors are encouraged to respond even if their offerings are limited to specific jurisdictions, as the structure allows for regional participation alongside national coverage.
Utah

POSTED

4 days ago

DEADLINE

in about 1 month
View Details
NAICS: 444180
New
DIBBS
SHIELD, ELECTRONIC C
Solicitation # SPE7M5-26-T-362T
The contract pertains to the procurement of a shield for electronic components, identified by part number 122163 and NSN 5999-01-628-3461, with a quantity of 13 units at a unit price of $13.00, totaling $169.00. Delivery is required within 156 days from the contract date, with shipment FOB origin and inspection and acceptance occurring at the destination. The packaging must comply with DLA’s mandatory requirements, including MIL-STD-129 labeling and RP001 packaging standards, with hazardous materials subject to TQ requirement IP025 and non-hazardous items conforming to ASTM D3951 unless superseded by a higher-priority DLA technical or quality requirement. The contractor must not use any Class I ozone-depleting substances in manufacturing without explicit written approval from the contracting officer, and any substitution of the approved source requires formal documentation from the original manufacturer for prior approval. The item must be delivered to the DLA Distribution facility in New Cumberland, Pennsylvania, with a required ship date of January 14, 2027. All technical and quality specifications referenced are governed by the DLA Master List of Technical and Quality Requirements, and any administrative or superseding part number changes must be formally approved prior to award. The solicitation number is SPE7M5-26-T-362T, issued by the Department of Defense’s Active Devices Division, with Margaret Smith designated as the primary point of contact.
ACTIVE DEVICES DIVISION

POSTED

5 days ago

DEADLINE

in 6 days
View Details
NAICS: 444180
New
DIBBS
CIRCUIT CARD ASSEMB
Solicitation # SPE7M1-26-T-239C
This contract specifies the procurement of one circuit card assembly with part number 632920-00 and NSN 5998-01-633-4023, issued by the Department of Defense through the Maritime Supply Chain under solicitation SPE7M1-26-T-239C. The item must be delivered within 20 days to the destination FOB, with no variance allowed in quantity, and is subject to inspection and acceptance at the delivery point. Packaging and marking must strictly comply with MIL-STD-2073-1E and MIL-STD-129, including palletization per DLA Packaging Requirements, and no special identification markings are required beyond standard procedures. The supply is destined for USS GEORGE WASHINGTON CVN 73 at FPO AP 96607, with transportation governed by specific DLA procedural notes and the use of VSM for shipment tracking. Technical and quality requirements are incorporated by reference from the DLA Master List of Technical and Quality Requirements, identified by R and I numbers, with the applicable revision tied to the solicitation or award date depending on acquisition type. The contractor must implement Configuration Change Management, including formal Engineering Change Proposal and Variance Request procedures, and adhere to Cybersecurity Maturity Model Certification Level 2 self-assessment requirements. Government-specific identifiers must be removed from non-accepted supplies, and all delivered items must be tracked using the provided purchase request and contract line item details. The contract includes government-only fields for internal tracking, and the response deadline, posting date, and delivery requirements are set for mid-2026, with point of contact information provided for inquiries and coordination.
MARITIME SUPPLY CHAIN

POSTED

5 days ago

DEADLINE

in 6 days
View Details
NAICS: 444180
New
DIBBS
CONNECTOR, PLUG, ELEC
Solicitation # SPE7M5-26-T-362U
The contract pertains to the procurement of a electrical plug connector identified by NSN 5935016417302 and part number 085212 from SAUER COMPRESSORS USA, INC., with a quantity of 12 units required under solicitation SPE7M5-26-T-362U. Delivery is due within 123 days from the contract date, with FOB origin terms and inspection and acceptance occurring at the destination. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including specific preservation methods and unit packaging codes, and palletization must adhere to DLA packaging requirements. The item is classified as a critical application and is subject to strict prohibitions on the use of ozone-depleting substances and mercury compounds in any phase of manufacturing, preservation, or packaging, unless explicit written approval from the contracting officer is obtained. Commercial items as defined in FAR 11.001 and part-numbered-only items are exempt from the ozone-depleting substance restriction. The delivery address is the DLA Distribution facility in New Cumberland, PA, and the required ship date is December 12, 2026. The contract allows no variance in quantity, with a strict zero percent plus or minus tolerance. Technical and quality requirements referenced in the DLA Master List govern performance, and all markings and documentation must align with federal standards applicable to defense procurement.
ACTIVE DEVICES DIVISION

POSTED

5 days ago

DEADLINE

in 6 days
View Details