Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

Naval Air Warfare Center, Aircraft Division (NAWCAD) Electronics Cooling Water (ECW-50) subsystems

Active
N68335-26-R-1114Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Naval Air Warfare Center, Aircraft Division (NAWCAD) intends to pursue a sole source contract with Applied Companies for the procurement, fabrication, and delivery of Electronics Cooling Water (ECW-50) subsystems, part number AC556-46. These subsystems are essential for supporting the U.S. Navy's AN/SPN-50 Shipboard Air Traffic Control Radar System. As the Original Equipment Manufacturer, Applied Companies is identified as the only source capable of meeting all Navy requirements, including specific NAVSEA testing for shipboard installation. This presolicitation, identified by solicitation number N68335-26-R-1114, is being conducted under the authority of 10 U.S.C. 3204(a)(1) due to the lack of other viable sources. While this is not a request for competitive proposals, the government will consider responses received by September 18, 2026, to determine if the requirement should be opened to competition. The primary point of contact for this effort is Truman Harris.

General Info

Sole source contract with Applied Companies for ECW-50 subsystems for Navy radar systems.

Agency

Department Of Defense → Navair Warfare Ctr Aircraft DivisionView Agency

NAICS

333998 - All Other Miscellaneous General Purpose Machinery ManufacturingView NAICS

Place of Performance

NJ

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhasePresolicitation
Posted

Presolicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Navair Warfare Ctr Aircraft Division
Contacts1 person available
OfficeJOINT BASE MDL, NJ, 08733, USA
Organization / Agency
Department Of Defense → Navair Warfare Ctr Aircraft Division
View Agency Profile
Office AddressJOINT BASE MDL, NJ, 08733, USA
Contacts
Truman Harris

Full Description

Show more

The Naval Air Warfare Center, Aircraft Division (NAWCAD) Lakehurst, NJ intends to negotiate on a sole source basis with Applied Companies, CAGE: 54080 for the procurement, fabrication and delivery of Electronics Cooling Water (ECW-50) subsystems, part number AC556-46, in support of the U.S. Navy's AN/SPN-50 Shipboard Air Traffic Control (ATC) Radar System.


Applied Companies, as the Original Equipment Manufacturer (OEM) of the ECW-50 system, is the only source that has been qualified to fully satisfy the Navy’s requirements including testing to meet NAVSEA requirements for shipboard installation.


The Government intends to solicit and negotiate this requirement under the authority of 10 U.S.C. 3204(a)(1), Only one responsible source and no other supplies or services will satisfy agency requirements. THIS NOTICE IS NOT A REQUEST FOR COMPETITIVE PROPOSALS.  However, the Government will consider all responses received within fifteen (15) days after the date of publication of this synopsis. A determination by the Government not to open the requirement to competition based on the responses to this notice will normally be considered solely for the purpose of determining whether to conduct a competitive procurement. Information provided herein is subject to change and in no way binds the Government to solicit for an award of a contract. Responses must be received within fifteen (15) days of publication of this notice via email no later than 18 September 2026 at 1:00 P.M. EDT to Truman Harris truman.b.harris3.civ@us.navy.mil.

Similar Contracts

Same NAICS industry code

NAICS: 333998
New
Federal
SERVER,RACKMOUNT
Solicitation # N0010426QYA2S
This contract pertains to the repair of a SERVER,RACKMOUNT under solicitation N0010426QYA2S, with a response deadline of December 22, 2025. The work is subject to strict technical and quality standards, including adherence to MIL-STD-130 Rev N for marking, compliance with original manufacturer specifications for repair procedures, and mandatory Government Source Inspection. All repairs must conform to the designated CAGE code 1LTM5 and reference CMS-00741, and no substitutions or design changes are permitted without prior written approval from the NAVICP-MECH Contracting Officer, with specific classification codes required for any authorized modifications. The contract mandates strict mercury-free requirements—no metallic mercury or contamination is allowed, with violations leading to rejection; exceptions require detailed approval and labeling. Deliveries are FOB Origin, and the repair turnaround time is measured from physical receipt of the asset at the contractor’s facility, as recorded in the Commercial Asset Visibility system, with final Government acceptance required within the stipulated timeframe. Contractors must provide a quote with unit and total price, repair turnaround time, and an informal cost breakdown if applicable, along with detailed awardee and inspection CAGE codes. The contract includes mandatory compliance with Buy American provisions, small business set-aside status, and annual representations and certifications, including those updated for 2025. All documentation references must be obtained through official DoD sources, with special handling required for NOFORN and Official Use Only materials. The awardee must be an authorized distributor of the original manufacturer, requiring proof of authorization submitted with the offer. Packaging must follow MIL-STD-2073 unless otherwise specified, and inspection records must be maintained for 365 days after final delivery. The contract is bilateral, requiring written contractor acceptance prior to execution, and performance is governed by the Navy’s Weapon Systems Support office based in Mechanicsburg, PA. The point of contact is Tyreese C. Smith, with communications directed via official Navy email and phone, and all responses must verify part number, NSN, and nomenclature before submission.
Navsup Weapon Systems Support Mech

POSTED

2 days ago

DEADLINE

in about 1 month
View Details
NAICS: 333998
New
Federal
WASHER,EHF
Solicitation # N0010426QFF46
This contract pertains to the procurement of a specialized washer, designated as SPECIAL EMPHASIS material (Level I/Scope of Certification), for use in a critical shipboard system where failure could result in catastrophic loss of life, ship systems, or the vessel itself. The item must comply with Dry Deck Shelter Specification S-5343934-1 as modified by CSD673, manufactured from QQ-N-286 annealed and age-hardened material, and is subject to stringent quality control procedures. Mandatory testing includes dye penetrant inspection, ultrasonic inspection on starting material 4 inches or greater in diameter, and slow strain rate tensile testing, which must be performed exclusively by qualified laboratories listed in the contract. All material must be fully traceable from raw stock through final fabrication, with unique heat-lot or traceability markings permanently applied to each component and matching documented certification data. Electronic signatures are permitted on certification documents provided they are securely controlled, uniquely tied to authorized individuals, and prevent unauthorized alterations. The contract mandates comprehensive quality assurance through a certified ISO-9001 quality system with supplementary requirements from ISO-10012 and ISO/IEC 17025, subject to government audit at source. All certifications must be submitted via Wide Area Work Flow (WAWF) to Portsmouth Naval Shipyard (N50286), inspected and accepted by N39040 prior to any shipment, with notification sent to PORT_PTNH_WAWF_NOTIFICATION@NAVY.MIL. No material may be shipped without prior written acceptance. First Article Testing is required, with the FAT report due 180 days after PRLT approval and final acceptance within 60 days of receipt. A one-year warranty from delivery date applies, and the order is “DO” rated under the Defense Priorities and Allocations System. Strict controls prohibit mercury contamination, unapproved weld repairs, and improper marking. Material certification data must be complete, unsigned with absolute affirmation, and conform exactly to specification revisions referenced in ECDS with CSD673. The procurement operates under Emergency Acquisition Flexibilities, is a total small business set-aside, and requires full compliance with Buy American, Federal Trade Agreements, and National Defense Priorities. All subcontractor activities are subject to the prime contractor’s oversight, including qualification assessments, quality system flow-downs, and traceability enforcement.
Navsup Weapon Systems Support Mech

POSTED

2 days ago

DEADLINE

in 20 days
View Details
NAICS: 333998
New
Federal
USB PORT LOCK
Solicitation # N0010426QAC81
This contract pertains to the manufacture and delivery of the USB PORT LOCK, identified by part number FY06ME5413 (3CX85), under solicitation N0010426QAC81, issued by the Naval Supply Systems Command Weapon Systems Support in Mechanicsburg, Pennsylvania. The requirement is set aside for small businesses and mandates strict compliance with military standards for design, marking, and configuration control, including adherence to MIL-STD-130 for mechanical parts and MIL-STD-973 for configuration management. All items must be manufactured by the sole approved vendor, THE CONNECTIVITY CENTER INC (CAGE: 38JM6), with no substitutions permitted without prior government testing and approval. The product must be marked with the manufacturer’s catalog number and the GDMS part number, with each shipping unit clearly labeled with quantity and part identifiers. Delivery is required within 90 days of award, and the contract enforces rigorous quality assurance protocols, including full contractor responsibility for inspection and recordkeeping, with all records retained for 365 days after final delivery. The Government reserves the right to conduct independent inspections, and all supplies are subject to acceptance based on compliance with specified technical and procedural requirements. Packaging must conform to MIL-STD-2073, and the contract includes provisions for cybersecurity maturity certification, national defense priority ratings, and strict controls on the handling of controlled documents marked “NOFORN” or “Official Use Only.” Payment will be processed through the Wide Area Workflow system, with inspection and acceptance occurring at the source. The point of contact for all contract-related inquiries is Amanda R. Hayward, reachable via email or telephone, and proposals must be submitted by the deadline of July 24, 2026.
Navsup Weapon Systems Support Mech

POSTED

2 days ago

DEADLINE

in 16 days
View Details

More opportunities from Department Of Defense → Navair Warfare Ctr Aircraft Division

Same awarding agency

NAICS: 332912
New
Federal
MQ-25 Oil Drain Attachment
Solicitation # N6833526Q1191
Solicitation N6833526Q1191 is a competitive procurement for the MQ-25 Stingray Unmanned Aircraft Systems Program, specifically for the procurement of Oil Drain Attachments (P/N: 4106AS0315-1, NSN: 4720-01-733-4712). The effort is structured as a single-award, fixed-price, three-year Indefinite Delivery/Indefinite Quantity (IDIQ) contract with a period of performance running from August 31, 2026, to August 30, 2029. This requirement is a 100% total small business set-aside under NAICS code 332912. Award will be granted to the responsible offeror providing the lowest price technically acceptable (LPTA) quote, provided they maintain neutral or acceptable past performance as evaluated via the Supplier Performance Risk System. The scope of work involves delivering hardware in accordance with the provided statement of work and drawings, with primary deliverables including the oil drain attachments and associated data requirements such as Certificates of Conformance and Requests for Variance. Delivery is preferred within six months of award, though alternate schedules up to 18 months may be proposed. Offerors must submit proposals electronically through the Procurement Integrated Enterprise Environment (PIEE) by the final deadline of September 8, 2026. Technical submissions must include a manufacturing approach, a bill of materials, and confirmation of CMMC Level 2 (Self) compliance. Inspection and acceptance will occur at the destination, specifically the NAVAIR Warfare Center Aircraft Division in Joint Base MDL, New Jersey.
Fluid Power Valve and Hose Fitting Manufacturing

POSTED

5 days ago

DEADLINE

in 2 days
View Details
NAICS: 332710
New
Federal
Acoustic Attenuators Part Number (P/N) 6509861-1; National Stock Number (NSN) 4920-01-216-8033)
Solicitation # N68335-26-Q-1166
The Naval Air Warfare Center Aircraft Division is soliciting quotes for a firm-fixed-price contract to procure eight Acoustic Attenuators (Part Number 6509861-1, National Stock Number 4920-01-216-8033) in support of the H-60 Helicopter Program. This requirement is a 100 percent Small Business Set-Aside under NAICS code 332710. The selected contractor will be responsible for the manufacture, assembly, and qualification of the units at their own facilities, with delivery required within 90 calendar days from the date of award to the Naval Air Warfare Center Aircraft Division in New Jersey. Award will be granted to the responsible offeror based on the lowest price technically acceptable (LPTA) criteria, provided they meet all technical and past performance requirements. Due to the nature of the technical data package, which contains Controlled Unclassified Information and is subject to export controls under ITAR, offerors must meet strict security prerequisites to access the drawings. This includes providing a current and valid DD Form 2345 and proof of CMMC Level 2 self-assessment certification. The contractor must maintain CMMC Level 2 status throughout the duration of the contract. All deliverables must comply with MIL-STD-130N and MIL-STD-129R marking and packaging standards. Proposals must be submitted electronically to the designated point of contact by September 15, 2026, and must include a signed SF18, SAM.gov certifications, and a detailed pricing schedule.
Machine Shops

POSTED

5 days ago

DEADLINE

in 10 days
View Details