Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

NDI/NDT Inspection Services

Active

Federal

Response Deadline10/30/2026, 06:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for NDI/NDT Inspection Services supports prime contractors on Navsup Weapon Systems Support projects within the Department of Defense. The scope of work involves performing non-destructive testing on welds, specifically utilizing specialized kits to conduct dye penetrant and magnetic particle inspections on 100 percent of critical characteristics. The selected provider is required to deliver certified NDI test reports for all inspected welds. Qualified candidates must hold ASNT Level II or III certifications to perform these technical services. The opportunity is categorized under NAICS code 541380 and was posted on June 17, 2026, with a response deadline set for October 30, 2026.

General Info

Subcontract for ASNT certified NDI/NDT weld inspections supporting Department of Defense projects.

Agency

Department Of Defense → Navsup Weapon Systems Support

NAICS

541380 - Testing Laboratories and Services

Place of Performance

PA

Set-Aside

NONE

Documents

This scope was carved out of N0038326RPA69.

The full solicitation package (4 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

17--JACK,AIRCRAFT LANDI

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedJun 17

subcontract

Response DeadlineOct 30

Submission deadline

Response Deadline

10/30/2026, 06:00:00 PM UTCin 2 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Navsup Weapon Systems Support

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → Navsup Weapon Systems Support

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs non-destructive testing on welds for prime contractors on Navsup Weapon Systems Support projects. Conducts dye penetrant inspection and magnetic particle inspection on 100% of critical characteristics using specialized NDT kits. Requires ASNT Level II or III certifications. Delivers certified NDI test reports for all welds.

Similar Contracts

Same NAICS industry code

Certified Hazardous Waste Analytical TestingThis subcontract opportunity with the California Department of Transportation involves providing certified chemical analyses of waste samples for prime contractors working on hazardous waste projects. The selected provider will conduct laboratory testing to determine disposal requirements and deliver analytical reports essential for manifest and profiling purposes. Performance of these services is centered in Inyo. To be eligible, the contractor must operate a state-certified laboratory holding both SWRCB-ELAP and CalEPA Environmental Laboratory Accreditation Program certifications. Interested parties must submit their responses by November 10, 2026, under NAICS code 541380.

California Department of Transportation

POSTED

about 14 hours ago

DEADLINE

Lead Testing and Environmental SamplingThis subcontract for Lead Testing and Environmental Sampling supports prime contractors on Gwinnett County Government firing range projects. The scope of work involves performing lead-level testing and wipe sampling on cleaned surfaces and within mechanical rooms to ensure lead concentrations remain below the threshold of 400 ug/ft2. All activities must be conducted using lead sampling kits and laboratory analysis in strict accordance with EPA and OSHA lead testing standards. The selected provider is responsible for delivering comprehensive testing reports and official clearance documentation to verify that the facilities are safe for occupancy and use. This opportunity falls under NAICS code 541380 and is associated with the state of Georgia. Interested parties should note the response deadline of November 13, 2026.

Gwinnett County Government

POSTED

about 15 hours ago

DEADLINE

Hazardous Waste Sampling and Profiling ServicesThis subcontract for Hazardous Waste Sampling and Profiling Services supports prime contractors on OC Waste and Recycling projects in California. The selected provider will perform chemical analysis and categorization of unknown or regulated waste streams, utilizing field sampling and specialized laboratory equipment such as Draeger pumps and OVA/HNU monitors to identify contaminants. All operations must be conducted by a certified environmental laboratory that maintains full compliance with California Code of Regulations Title 22. The primary deliverables for this engagement include detailed waste profile reports and formal categorization documentation. Interested parties should note that the response deadline is November 25, 2026, and the services fall under NAICS code 541380.

OC Waste & Recycling

POSTED

about 16 hours ago

DEADLINE

Certified Independent Concrete Testing Laboratory ServicesThis subcontract for Certified Independent Concrete Testing Laboratory Services involves providing independent quality control testing for prime contractors working on Maryland Transit Administration light rail projects. The scope of work requires the securing of samples according to ASTM C 172, the curing of specimens per ASTM C 31, and the execution of compressive strength tests on cylinders to ensure a design strength of 7,000 psi. The selected provider is responsible for delivering all necessary certified test reports and comprehensive QA/QC documentation. This opportunity falls under NAICS code 541380, with a response deadline set for November 17, 2026.

Maryland Transit Administration

POSTED

about 17 hours ago

DEADLINE

Environmental & Material Testing ServicesThis subcontract opportunity for Environmental and Material Testing Services supports prime contractors working on historic facility projects within Warren County, Virginia, specifically in Front Royal. The selected provider will be responsible for conducting comprehensive material testing and identifying hazardous substances, including lead and asbestos, while performing necessary environmental reviews. To qualify, contractors must possess the required certifications for environmental sampling and laboratory analysis. Key deliverables for this engagement include detailed material testing reports and the provision of environmental clearance or remediation plans. Interested parties must submit their responses by November 19, 2026.

POSTED

about 17 hours ago

DEADLINE

Third-Party Construction Materials Testing & InspectionThis subcontract for Third-Party Construction Materials Testing and Inspection supports the University of Massachusetts Medical School West Garage Modernization projects in Shrewsbury. The selected provider will perform independent quality assurance, field inspections, and materials testing for concrete, asphalt, and steel to ensure all construction materials comply with engineering specifications. Key deliverables include the submission of certified test reports and detailed inspection logs. To qualify for this engagement, the contractor must hold professional PE licensure and maintain laboratory accreditation through AASHTO or ASTM. The solicitation was posted on October 27, 2026, with a response deadline of November 17, 2026. The project falls under NAICS code 541380 and is managed through the University of Massachusetts System.

University of Massachusetts System

POSTED

about 18 hours ago

DEADLINE

West Garage Modernization - 3rd Party Testing

Solicitation # BD-27-1109-UMMS-UMMS-134854

The University of Massachusetts System, specifically the UMass Medical School, has issued solicitation BD-27-1109-UMMS-UMMS-134854 for third party construction materials testing and inspection services as part of the West Garage Modernization project. This open market procurement is based in Shrewsbury, Massachusetts, with the performance of services occurring at the Washington Street location. The solicitation was posted on October 27, 2026, and requires responses by November 17, 2026. Administrative oversight is managed by the UPST Procurement Office, with Toby Lau serving as the primary purchaser. All inquiries and billing are directed to the office located at 50 Washington Street, Shrewsbury, MA 01581. While the contract specifies a single line item for the required testing and inspection services, the total contract value and specific unit pricing are not disclosed in the provided documentation. Proposals must be submitted through the COMMBUYS system.

University of Massachusetts System

POSTED

about 18 hours ago

DEADLINE

Site Investigation and Field TestingThis subcontract opportunity for the City of Virginia Beach involves providing site investigation and field testing services for stormwater projects. The selected contractor will be responsible for conducting site visits, field reconnaissance, and technical testing to determine soil and site conditions using soil boring rigs and specialized equipment. Key deliverables include the provision of comprehensive site investigation reports and detailed field testing data. To qualify for this engagement, the contractor must employ a Professional Geologist or a Professional Engineer. The work will be performed within Virginia Beach under NAICS code 541380. Interested parties must submit their responses by the deadline of December 11, 2026.

City of Virginia Beach

POSTED

about 18 hours ago

DEADLINE

in about 1 month

Structural Special Inspections and Third-Party ReviewThis subcontract involves providing independent third-party structural reviews and special inspections for prime contractors working on University of Connecticut facility projects. The scope of work includes conducting special inspections for concrete, masonry, and steel, as well as performing construction observation and reviewing material submittals. The selected provider is responsible for delivering comprehensive inspection reports and Statements of Special Inspections to ensure project compliance. To qualify for this engagement, the provider must hold a Connecticut Professional Engineering license and possess all relevant inspector certifications. Managed by DAS Procurement for the state of Connecticut, the solicitation was posted on October 27, 2026, with a response deadline of November 24, 2026. The contract falls under NAICS code 541380.

DAS Procurement

POSTED

about 19 hours ago

DEADLINE

Environmental Testing & Sampling LaboratoryThis subcontract opportunity is for an Environmental Testing and Sampling Laboratory to provide specialized analysis and sampling services for prime contractors working on New York State Education Department and Office of General Services projects. The selected provider will be responsible for sampling and analyzing suspect materials, specifically focusing on lead-based paint and PCB-containing caulk, to determine if abatement is necessary. The scope of work includes the use of laboratory equipment for the detection of asbestos and PCBs, culminating in the delivery of comprehensive Hazardous Materials Survey Reports. To be eligible, the laboratory must hold certifications that meet all applicable EPA and New York State standards. This procurement falls under NAICS code 541380 and is managed through the NYS OGS Design and Construction agency. Interested parties must submit their responses by the deadline of December 9, 2026.

NYS OGS Design & Construction - Construction Contractors

POSTED

about 20 hours ago

DEADLINE

in about 1 month

Medical Device Sterilization and PackagingThis subcontract for the Department of Defense Medical Supply Chain involves providing final sterile sealing and packaging services for prime contractors fulfilling DLA medical supply contracts. The scope of work requires the sealing of kits and the execution of EtO or Gamma radiation sterilization within a cleanroom environment, strictly adhering to ASTM D3951 and MIL-STD-129 standards. All deliverables must be provided as individually sealed, sterile boxes containing ten units each. To ensure quality and safety, the contractor must maintain sterilization validation according to ISO 11135 or 11137 and comply with Medical Marking Standard No. 1. The performance of this contract will take place in San Antonio, Texas. Interested parties should note the response deadline of November 2, 2026, for this specialized medical device sterilization and packaging requirement.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 20 hours ago

DEADLINE

Aerospace NDT and Quality Inspection Services

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 20 hours ago

DEADLINE

More opportunities from Department Of Defense → Navsup Weapon Systems Support

Same awarding agency

Supply of Nonmetallic Special Shaped Section Seal (NSN 5330-01-707-8487)This subcontract involves the manufacture or procurement of a nonmetallic special shaped section seal under NSN 5330-01-707-8487 for prime contractors supporting Navsup Weapon Systems Support. The selected provider must ensure strict adherence to quality control standards per ISO 9001 or SAE AS9100, execute IUID marking according to MIL-STD-130, and follow MIL-STD-2073 for packaging. Possession of the necessary equipment for IUID marking is a mandatory requirement for the execution of this contract. The project falls under NAICS code 326199 and requires the delivery of one completed seal to DLA Distribution San Joaquin, with the place of performance located in Philadelphia. Interested parties must submit their responses by November 20, 2026.

All Other Plastics Product Manufacturing

POSTED

DEADLINE

Supply of Replacement Parts for Pneumatic AccumulatorsThis subcontract involves the supply of hardware articles, subassemblies, and components for V2 Pneumatic Accumulators to support prime contractors on projects for the Navsup Weapon Systems Support under the Department of Defense. The selected provider is responsible for manufacturing or sourcing parts that strictly adhere to Technical Data Package requirements, ensuring all delivered replacement parts are fully certified. A critical component of the contract is the requirement for rigorous quality control, including the provision of dimensional coordinate and position inspection reports. The contractor must maintain detailed inspection records for a minimum of 12 months to ensure compliance with all technical specifications.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

DEADLINE

Pneumatic Accumulator Teardown and Repair ServicesThis subcontract with Navsup Weapon Systems Support involves the teardown, evaluation, repair, and modification of V2 Pneumatic Accumulators, specifically NSN 7RH 2530-01-418-3271. The scope of work includes disassembling units to assess wear, restoring parts to original drawing specifications, and performing rigorous pneumatic pressure and environmental testing to deliver a certified repaired product. To qualify, the contractor must hold ISO 9001 or SAE AS9100 certification and utilize calibration tools that comply with ANSI/NCSL Z540.3 standards. The opportunity was posted on October 27, 2026, with a response deadline of November 6, 2026, falling under NAICS code 334418.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

DEADLINE

Aircraft Antenna SupplyThis subcontract, managed by Navsup Weapon Systems Support under the Department of Defense, involves the supply of aircraft antennas for prime contractors working on Department of the Navy aircraft projects. The scope of work includes the manufacture or sourcing of antennas utilizing RF antenna elements, conductive coatings, and radome housings. All deliverables must strictly adhere to defined RF performance specifications and rigorous aerospace quality standards as outlined in the Statement of Work. The opportunity is categorized under NAICS code 334220 and is designated for performance in Philadelphia. Interested parties must submit their responses by the deadline of December 11, 2026.

Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

DEADLINE

in about 1 month

Aircraft ATL Channel SupplyThis subcontract opportunity, managed by Navsup Weapon Systems Support under the Department of Defense, involves the supply of aircraft ATL channels for prime contractors working on Department of the Navy aircraft projects. The selected provider will be responsible for manufacturing or sourcing these channels using aerospace-grade aluminum or alloys through extrusion or machining processes, ensuring all components strictly adhere to aerospace quality standards and the specifications outlined in the Statement of Work. The project is categorized under NAICS code 336413 and will be performed in Philadelphia. Interested parties must submit their responses by the deadline of December 11, 2026, following the solicitation posted on October 27, 2026.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

in about 1 month

Waveguide Component SupplyThis subcontract, titled Waveguide Component Supply, involves the manufacture and sourcing of RF waveguides for prime contractors supporting Department of the Navy aircraft projects. Managed by the Navsup Weapon Systems Support under the Department of Defense, the scope of work requires the use of precision tubing, conductive plating, and RF shielding materials to ensure all components meet strict aerospace tolerances and RF transmission standards. The contract specifies the delivery of multiple waveguide units across CLINs B001 through B012, with performance taking place in Philadelphia. Interested parties must note the response deadline of December 11, 2026, for this opportunity categorized under NAICS code 334220.

Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

DEADLINE

in about 1 month

E2D Rotodome SupplyThis subcontract with Navsup Weapon Systems Support involves the manufacture and supply of spare E2D Rotodomes for Department of the Navy aircraft projects. The contractor is responsible for sourcing or producing composite radar domes utilizing RF-transparent resins and large-scale molding techniques, ensuring all components meet strict aerospace quality standards and RF transparency specifications. The agreement stipulates the delivery of four spare rotodomes annually over a five-year period. Performance for this contract will take place in Philadelphia under NAICS code 336413.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

in about 1 month

Rotary Coupler Assembly SupplyThis subcontract with Navsup Weapon Systems Support under the Department of Defense involves the supply of rotary coupler assemblies for prime contractors working on Department of the Navy aircraft projects. The scope of work includes the manufacture or sourcing of assemblies that utilize precision bearings, seals, and rotary coupling components, all of which must adhere to strict aerospace quality standards. The agreement specifies a delivery schedule of four rotary coupler assemblies per year over a five-year period. Performance for this contract is based in Philadelphia, falling under NAICS code 336413.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

in about 1 month

Flight Shaft SupplyThis subcontract through Navsup Weapon Systems Support involves the supply of precision-machined flight shafts for Department of the Navy aircraft projects. The contractor is responsible for manufacturing or sourcing part number 123BM52104 using high-strength aerospace alloys and precision machining equipment, with all work adhering to AS9100 aerospace quality standards. The agreement specifies a delivery schedule of one flight shaft per year over a five-year period. Performance for this contract will take place in Philadelphia, and the solicitation is open for responses until December 11, 2026.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

in about 1 month

MIL-SPEC Packaging and Marking for Overseas ShipmentThis subcontract involves providing specialized packaging and marking services for prime contractors supporting Navsup Weapon Systems Support projects. The scope of work requires the use of best standard commercial packaging tailored for overseas shipment, specifically incorporating cushioning and moisture barriers to protect repaired units. All deliverables must strictly adhere to MIL-STD-129 and MIL-STD-2073-1 standards to ensure compliance with military specifications. The project is managed under NAICS code 488510 and will be performed in Philadelphia. The final objective is the secure delivery of packaged and marked units to MAPAC: DUK002. Interested parties should note the response deadline of November 30, 2026.

Freight Transportation Arrangement

POSTED

DEADLINE

in about 1 month

Specialized Repair of Electric Warming Oven (NSN 7310171251500)This subcontract involves the specialized repair of an electric warming oven (NSN 7310171251500) for prime contractors supporting Navsup Weapon Systems Support projects. The scope of work includes technical evaluation, disassembly, and full restoration to ensure the unit is operable and meets original manufacturer specifications and technical orders. The final deliverable is one fully restored unit that is marked in accordance with MIL-STD-130. Performance will take place in Philadelphia under NAICS code 811210. To be eligible, the contractor must maintain ISO 9001 certification and ensure full compliance with CMMC and DFARS requirements. The response deadline for this opportunity is November 30, 2026.

Electronic and Precision Equipment Repair and Maintenance

POSTED

DEADLINE

in about 1 month

Electronic Component Supply for CCA RepairThis subcontract with Navsup Weapon Systems Support under the Department of Defense involves the supply of authentic electronic components, including capacitors, resistors, and integrated circuits, specifically for US Navy CCA repair projects. The scope of work focuses on the sourcing and delivery of qualified components for part number 8527450-901, which may be provided as individual parts or assembled kits delivered directly to the repair facility. To ensure quality and security, the provider must supply certification of origin to prevent the introduction of counterfeit parts into the supply chain. Additionally, the contract requires strict adherence to the Buy American Act and the Trade Agreements Act. The opportunity is categorized under NAICS code 423610, with a response deadline set for November 27, 2026.

Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

DEADLINE

in about 1 month

Earlier notices in this NAICS code

Posted before this notice, open and closed

Notice of Intent to Award Sole Source to Rady Children’s Hospital – San Diego

Solicitation # HT941026N0066

Defense Health Agency Hcd West

POSTED

CLOSED

B533 Processing Water Samples for Renal Dialysis, located at VA Puget Sound Health Care System

Solicitation # 36C26026Q0762

260-NETWORK Contract Office 20 (36C260)

POSTED

CLOSED

Non Drinking Water Analysis

Solicitation # HT942726RG0616

Defense Health Agency

POSTED

CLOSED

LOW BACKGROUND INFRARED (LBIR) BRIDGE

Solicitation # FA2263-22-C-0003_SSN

FA2263 Aflcmc Romk Afmetcal

POSTED

CLOSED

Fire Extinguisher Hydrostatic Testing

Solicitation # 1333ND26QNB130252

Department Of Commerce Nist

POSTED

CLOSED

Sensor Monitoring and Technical Support for Meteorological/TSG Systems

POSTED

CLOSED

First Article Testing (FAT) Services

POSTED

CLOSED

Aerospace Certification and Documentation Services

Aviation Logistics Center (ALC)(00038)

POSTED

CLOSED

Aerospace Airworthiness Documentation and Certification Support

Aviation Logistics Center (ALC)(00038)

POSTED

CLOSED

Non-Destructive Testing (NDT) and Quality Inspection

Ok DLA Aviation At Oklahoma City

POSTED

CLOSED

ISO 17025 Calibration Services for Ground Recording Systems (GRS)

NASA Shared Services Center

POSTED

CLOSED

Facility Safety and Emergency Response Support

NASA Shared Services Center

POSTED

CLOSED

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS