This Solicitation opportunity from Department Of Defense was posted on May 18, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.
NEEDLE, HYPODERMIC
Contract Overview
Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.
Active Opportunities Like This One
AI Contract Overview
The contract specifies the procurement of hypodermic needles, gauge 21, packaged in boxes containing 12 needles each. These needles must have a shelf life of 60 months with no more than nine months elapsed between manufacture and delivery. Packaging requirements adhere to commercial standards and ASTM D3951, ensuring sealed unit containers protect the product from damage. Exterior shipping containers must meet commercial standards for safe transport at the lowest cost to the delivery point. All labeling must comply with Medical Marking Standard No. 1, including identification such as NSN, manufacturer and CAGE code, dates of manufacture and expiration or retest, contract/lot number, and lot control markings prefixed by "MFD." The product is FDA-regulated, and contracting officials are required to confirm specifications with a product specialist. Delivery terms call for three boxes to be delivered within 20 days, FOB destination, with inspection and acceptance occurring at the destination. Palletization and packaging must meet Defense Logistics Agency (DLA) standards. The contract references specific manufacturers and part numbers, including Becton Dickinson and Medline. Shipment is destined for the USS Daniel Inouye (DDG 118) with detailed addresses and shipment instructions for vessel transport under DLA transport notes. The procurement is managed by the Department of Defense’s Medical Supply Chain and supported by DLA Troop Support with a designated point of contact available for inquiries.
General Info
Agency
NAICS
Place of Performance
UNIT 100115 BOX 1, FPO, AP, 96691-1500, USSet-Aside
Timeline
Submission Closed
Organization & Contact Information
Full Description
NEEDLE,HYPODERMIC
GAUGE: 21
.
UNIT OF ISSUE IS A BOX OF 12 EACH
.
SHALL HAVE A SHELF LIFE OF 60 MONTHS.
NOT MORE THAN 9 MONTHS SHELF LIFE SHALL HAVE ELAPED
FROM DATE OF MANUFACTURE TO DATE OF DELIVERY TO
THE GOVERNMENT.
APPLICABLE TO ALL MEDICAL ACQUISITIONS:
PACKAGING AND PACKING SHALL BE COMMERCIAL AS
SPECIFIED IN THE PROCUREMENT DOCUMENT.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED
IN A SUITABLE SEALED UNIT CONTAINER CAPABLE
OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR
BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL
EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN
NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND
SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT
THE LOWEST RATE, TO POINT OF DELIVERY CALLED
FOR IN THE CONTRACT OR ORDER.
MATERIAL MUST BE MARKED IAW MEDICAL MARKING
STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES
TO MIL-STD-129.
COPIES OF MEDICAL MARKING STANDARD NO. 1
(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA
TROOP SUPPORT VIA EMAIL TO fssb@dla.mil. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT: https://www.dla.mil/Logistics-Operations/Packaging/
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
LABELS SHALL INCLUDE:
NSN
MANUFACTURER AND CAGE
DATE OF MANUFACTURE, EXPIRATION, OR RETEST DATE
CONTRACT NUMBER/LOT NUMBER
.
MARKINGS ON ALL CONTAINERS SHALL INCLUDE THE LOT
(CONTROL) NUMBER AND DATE OF MANUFACTURE PREFIXED
BY "MFD".
.
This device or drug is regulated by the FDA. Note to Buyers: The contracting official shall send a referral in EBS to the product specialist for confirmation. Please include bidder name and bidder contact information, manufacturer name, manufacturer part number, and item description.
RS023: Shelf-life requirement RS001 for a TYPE I (CODE S) item with a shelf life of 60 months (non-extendable) applies to this item.
BECTON, DICKINSON AND COMPANY 22790 P/N 305165 MEDLINE INDUSTRIES, LP 0PMN3 P/N B-D305165Z TRIBALCO LLC 30TR5 P/N TICS.17.10272
SPE2DS-26-T-082G
SECTION B
MCKESSON MEDICAL-SURGICAL GOVERNMENT 1EU19 P/N 08828
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7016817426 0001 BX 3.000
NSN/MATERIAL:6515016603150
DELIVERY (IN DAYS):0020
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
R50187
USS DANIEL INOUYE DDG 118
UNIT 100115 BOX 1
FPO AP 96691-1500
US
VESSEL SHIPMENT. TRANSPORTATION SEE DLAD PROC NOTE C19. FIRST DESTINATION TRANSPORTATION SEE DLAD PROC
NOTE C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
R50187
USS DANIEL INOUYE DDG 118
DLA VENDORS: USE VSM FOR
US
RDD 777 SHIPMENT. TRANSPORTATION SEE DLAD PROC NOTE C19. FIRST DESTINATION TRANSPORTATION SEE DLAD PROC
NOTE C20 AND CONTRACT
SPE2DS-26-T-082G
SECTION B
PR: 7016817426 PRLI: 0001 CONT’D
M/F: (TCN) R501876132HM82
RDD: 777
PROJ: EP5 TP 2
SUPP ADD: SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 04
DIC: A41 DIST: 9B ADV: 2A FC: N7
Need Ship Date:00/00/0000 Original Required Delivery Date:05/20/2026
SPE2DS-26-T-082G NSN/Part Number: 6515-01-660-3150 Quantity: 3 BX Purchase Request: 7016817426QTY: 3 Delivery: 20 days ADO