Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

NEEDLE, HYPODERMIC

Active
SPE2DS-26-T-306HFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract pertains to the procurement of 100 hypo needles, specifically a dental model designated C10A with a 27-gauge size and a length range of 1.125 to 1.50 inches, featuring a threaded design and sterile packaging. The unit of issue is a package containing 100 needles, and the item carries a non-extendable shelf life of 60 months under the RS023 shelf-life requirement for a Type I (Code S) item. Technical and quality specifications referenced under RA001 are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. Packaging must comply with DLA requirements under RP001, and all supplies must adhere to regulations for removal of government identification if not accepted, as outlined in RQ011. The item is subject to potential covered defense information rules under RD003. The NSN/part number is 6515-00-181-7412, with a single purchase request for one package. Delivery is required within 20 days after order placement. Bidders must clearly identify the source and part number being supplied. The solicitation, issued under SPE2DS-26-T-306H, was posted on August 4, 2026, with bids due by August 10, 2026, for delivery to a military post office in FPO with ZIP 96694, under the Department of Defense’s Medical Supply Chain.

General Info

Procure one package of 100 sterile C10A 27G hypo needles, NSN 6515-00-181-7412, deliver in 20 days.

Agency

Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSFView Agency

NAICS

339113 - Surgical Appliance and Supplies ManufacturingView NAICS

Place of Performance

P.O. BOX UNIT 100491 BOX 1, FPO, AP, 96694, US

Set-Aside

NONE

Documents

(1)

SPE2DS-26-T-306H.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF
ContactsNo contacts available
OfficeUS
Organization / Agency
Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF
View Agency Profile
Office AddressUS
ContactsNo contact information available

Full Description

Show more
NEEDLE,HYPODERMIC
NEEDLE,HYPODERMIC
NEEDLE HYPO C10A DENTAL 27GA 1.125-1.50" LG THREADED STER 100S
UNIT OF ISSUE: PACKAGE/100EACH
..
RS023: Shelf-life requirement RS001 for a TYPE I (CODE S) item with a shelf life of 60 months (non-extendable) applies to this item.
.. RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
..
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
..
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
..
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
..
BIDDER: PLEASE SPECIFY SOURCE AND PART
NUMBER BEING SUPPLIED.
ADEQUATE DATA FOR THE NSN/Part Number: 6515-00-181-7412 Quantity: 1 PG Purchase Request: 7017708379QTY: 1 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 339113
New
DIBBS
APPLICATOR, DISPOSABLE
Solicitation # SPE2DS-26-T-305Y
The contract specifies the procurement of a disposable 6-inch wooden rod applicator, sterile and packaged two per packet with 100 packets per unit of issue, supplied by approved vendors including REDI PRODUCTS INC, MEDLINE INDUSTRIES, and McKesson Medical-Surgical. The item is regulated by the FDA and must be sourced only from approved manufacturers with specified part numbers. All packaging must comply with commercial standards and the Medical Marking Standard No. 1, replacing MIL-STD-129, with containers designed to prevent damage and ensure safe transport via common carriers at the lowest cost to the designated delivery point. The product must be free of intentional mercury or mercury compounds except in limited exempted uses, and portable devices containing mercury must meet Navy shockproof and secondary containment requirements. Delivery is required within 20 days FOB destination with zero tolerance for quantity variance, and inspection and acceptance occur at the delivery point. Packaging must adhere to MIL-STD-2073-1E, and all items must be properly marked in accordance with DLA’s medical marking guidelines. The solicitation is issued under contract SPE2DS-26-T-305Y with NSN 6515-00-564-8242, and bidders must clearly identify the company and part number being offered. The government requires confirmation of FDA-regulated status via EBS referral, and technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced in the document. This procurement is for a Fleet Prime Vendor item, and the unit of issue is a package (PG).
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 3 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
PANEL, MODULAR, HANGING
Solicitation # SPE2DH-26-T-5768
The contract is for a single unit of a modular hanging trauma panel designated by NSN 6530-01-515-7651, intended for rapid deployment in combat trauma care during CASEVAC operations. Constructed of black Cordura nylon, the panel is MOLLE compatible and designed to integrate seamlessly with military aircraft, ground vehicles, and fixed or temporary facilities. It features a comprehensive internal layout including four full-width storage pockets, one half-panel bellos pocket, and a total of ten modular pockets—six small, two medium, one long, and one flat—each labeled with removable low-light visibility markings to ensure quick identification under low-visibility conditions. The panel itself is marked internally and externally with low-light readable "TRAUMA" identifiers and supports immediate access to essential medical supplies, enabling effective "tail gate" medical response anywhere on the battlefield. The procurement falls under DLA packaging requirements and incorporates technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, with the applicable revision controlled by the solicitation issue date or award date depending on acquisition size. The solicitation number is SPE2DH-26-T-5768, issued on August 4, 2026, with bids due by August 11, 2026. Delivery is required within 20 days of award to Fort Bliss, Texas, 79918-2527. The contract is managed by the Department of Defense’s Medical Supply Chain FSH, with Tina Vu listed as the primary point of contact. Bidders must clearly identify the source and part number of the supplied item, and the purchase request number is 7017716143, with the unit of issue being each.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 3 hours ago

DEADLINE

in 7 days
View Details
NAICS: 339113
New
DIBBS
SKIN CLOSURE, ADHESI
Solicitation # SPE2DS-26-T-306Y
The contract specifies the procurement of sterile adhesive skin closures in the form of Steri-Strip wound closure strips measuring 0.25 inches by 3 inches, with a total quantity of 150 strips per package. The strips are supplied in fifty sealed plastic envelopes, each containing three strips, and are available in two alternate backings: polypropylene film and nonwoven nylon fabric, both porous. The product must have a shelf life of 36 months, with no more than five months elapsed between the manufacturer’s date and delivery to the government. Labeling must include the date of manufacture, expiration or retest date, contract number, and lot number, all in compliance with the latest revision of Medical Marking Standard No. 1, which replaces MIL-STD-129. Packaging must meet commercial standards, with each unit sealed in a protective container and shipped in suitable exterior packaging to ensure safe delivery at the lowest carrier rate to the specified point of delivery in Hurlburt Field, Florida. The item is identified by NSN 6510-00-913-5874 and is classified as a Type I (Code Q) shelf-life item with a non-extendable 36-month expiration. All technical and quality requirements are governed by the DLA Master List, and bidders must provide the source and part number being offered. The solicitation, issued under SPE2DS-26-T-306Y, requires bids to be submitted by August 10, 2026, with delivery expected within 20 days of award.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 3 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
ELECTRODE, ELECTROCARDI
Solicitation # SPE2DS-26-T-306U
The contract specifies the procurement of eight units of electrocardiograph electrodes designed exclusively for use with the Cardiac Science Powerheart G5 automatic and semi-automatic AEDs. Each unit must be properly sealed in a protective container to prevent damage and packaged in commercial shipping containers suitable for safe delivery via common carriers at the lowest possible rate to the designated delivery point in San Diego, California. The materials must comply with Medical Marking Standard No. 1, which replaces all references to MIL-STD-129, and all packaging and labeling requirements are governed by DLA Packaging Requirements for Procurement and other technical and quality standards referenced in the DLA Master List. Each unit must have a minimum shelf life of 24 months, with no more than three months having elapsed from the date of manufacture to the date of government delivery. Labels on each unit must include the NSN 6515-01-652-8523, manufacturer name and CAGE code, manufacturer date, expiration or retest date, and the contract number or lot number. All supplies are subject to removal of government identification if not accepted, and the solicitation is governed by the revision of the DLA Master List effective on the solicitation issue date. The contract, awarded under solicitation SPE2DS-26-T-306U, has a response deadline of August 10, 2026, and requires delivery within 20 days after order placement.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 3 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
BANDAGE KIT, ELASTIC, AB
Solicitation # SPE2DS-26-T-306L
The contract specifies the procurement of an elastic abdominal wound bandage kit, designed for use in military trauma scenarios and selected for inclusion in the Warrior Aid and Litter Kit and vehicle-mounted trauma kits for the U.S. Army. Each kit is sterile and contains a high-absorbency white pad measuring 12 inches by 12 inches, an extra-wide secondary dressing, and an application bar. The unit of issue is a kit, with a total quantity of three kits required. The product must have a shelf life of 60 months, and no more than nine months may have elapsed from the date of manufacture to the date of delivery to the government. Packaging must comply with DLA packaging requirements, and all technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements. The item is identified by NSN 6510-01-532-6656, and the contract solicitation number is SPE2DS-26-T-306L, issued by the Department of Defense’s Medical Supply Chain. Delivery is due within five days of award, with the place of performance listed as Watervliet, New York. The primary point of contact is Tiffany Parker, with email and phone details provided. The solicitation was posted on August 4, 2026, with a response deadline of August 10, 2026, under a federal procurement with NAICS code 339113.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 3 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
PLUG, EAR
Solicitation # SPE2DS-26-T-305L
The contract specifies the procurement of 150 pairs of non-linear, small-sized, triple-flange ear plugs in yellow, each pair featuring a detachable cloth cord and packaged in a clear pillow case with a black beaded chain. These ear plugs provide a Noise Reduction Rating of 24 dB when the protective cap is closed and 12 dB when open, meeting specific hearing protection standards. The item is identified by NSN 6515-01-632-4167 and is being requested in three boxes, each containing 50 pairs, with delivery required within 20 days after award. Bidders must supply the exact source and part number as referenced in the DLA Master List of Technical and Quality Requirements, which governs all technical and quality specifications incorporated into this solicitation. Compliance with DLA packaging standards and the removal of government identification from non-accepted supplies is mandatory. The solicitation, issued under number SPE2DS-26-T-305L, was posted on August 4, 2026, with responses due by August 10, 2026. It falls under NAICS code 339113 and is managed by the Department of Defense’s Medical Supply Chain MD Surg FSF office. The primary point of contact is Chandler Alvarez, reachable via email and phone provided in the contract data. The purchase request number is 7017721062, and bidders must ensure their submission aligns with the DLA Master List version in effect on the solicitation issue date, as this determines applicable technical and quality criteria. The contract is a federal procurement and the place of performance is unspecified, but the buyer is located in the United States.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 3 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
NEEDLE, HYPODERMIC
Solicitation # SPE2DS-26-T-305N
The contract is for the procurement of 500 hypodermic needles, 16 gauge by 3/4 inch, packaged in units of 100 per package, with a total of five packages required. Each needle must be rigidly packaged in color-coded aluminum hub with a two-piece rigid pack sheath, and all units must meet the Medical Marking Standard No. 1, superseding MIL-STD-129. The product has a shelf life of 60 months, and at the time of receipt by the first government activity, a minimum of 51 months of shelf life must remain. All packaging must be labeled with the manufacturer’s lot or control number and date of manufacture, prefixed with “MFD,” and must comply with ASTM D3951 unless superseded by DLA’s Master List of Technical and Quality Requirements. The item is regulated by the FDA and requires referral through EBS for confirmation prior to award. Packaging, labeling, and shipment must follow DLA’s specifications, including use of traceable freight methods and exclusion of parcel post. The delivery destination is Fort Campbell, Kentucky, with a required delivery date of August 5, 2026, and a 20-day delivery window from award. The manufacturer is Cardinal Health 200, LLC, with part number 81-200060, and the NSN is 6515-01-529-0566. The quantity is firm and fixed with zero variance allowed, and the contract specifies the unit of issue and purchase unit in accordance with DLA standards.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 3 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
PAD, NONADHERENT
Solicitation # SPE2DS-26-T-306B
The contract specifies the procurement of sterile, nonadherent Telfa pads measuring 3 inches by 8 inches, packaged in quantities of 50 per unit, with each pad individually sealed in perforated plastic film on both sides. The pads are made of white cotton nonwoven material and must maintain a shelf life of 36 months, with no more than five months elapsed between the manufacturer’s production date and delivery to the government. All packaging must comply with commercial standards as outlined in the procurement document, ensuring each unit is properly sealed and protected from damage, while shipping containers must be suitable for safe, cost-effective delivery via common carrier to the designated delivery point in APO, ZIP 96260-5479. Labeling must adhere to Medical Marking Standard No. 1, replacing all references to MIL-STD-129, and copies of the standard are available through DLA Troop Support. The item is classified as a TYPE 2 (CODE 7) with an extendable 36-month shelf life under RS060, and all technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with applicability determined by the solicitation or award date. The contract, issued under solicitation SPE2DS-26-T-306B, requires delivery within 84 days, with the NSN 6510-00-986-2942 and one purchase request tied to the order.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 3 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
DRESSING, OCCLUSIVE, ADH
Solicitation # SPE2DS-26-T-306P
The contract specifies the procurement of TEGADERM TRANSPARENT DRESSINGS, which are sterile, adhesive, occlusive dressings designed for use on peripheral and central IV catheters or as wound dressings. Each dressing measures 2.375 inches wide by 2.750 inches in length and is individually packaged in units of 100 per package. The product must have a non-extendable shelf life of 36 months, with no more than five months allowed to have elapsed between the manufacturer’s date and delivery to the government. Labeling must include the date of manufacture, expiration or retest date, contract number, and lot number in compliance with the latest revision of Medical Marking Standard No. 1, which supersedes MIL-STD-129. Packaging must meet commercial standards, ensuring protection from damage during transit, with exterior shipping containers suitable for safe and cost-effective delivery via common carrier to the specified point of delivery. All items must be marked according to MMS No. 1, and government identification must be removed from non-accepted supplies. The NSN is 6510-01-234-8943, with a single purchase order for one package, requiring delivery within 20 days of award under solicitation SPE2DS-26-T-306P, issued by the Department of Defense’s Medical Supply Chain MD Surg FSF. Bidders must provide the source and part number being offered.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 3 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
SPONGE, SURGICAL
Solicitation # SPE2DS-26-T-305U
The contract specifies the procurement of surgical sponges measuring 4 inches by 4 inches, supplied in sealed envelopes containing two sponges each, with twenty-five envelopes per box and twelve hundred sponges per packaging unit. The product must be sterile, have a uniform shelf life of sixty months, and no more than nine months may have passed between the manufacturer’s date and delivery to the government. Labeling must include the date of manufacture, expiration or retest date, contract number, and lot number, all in compliance with the latest revision of Medical Marking Standard No. 1, which supersedes MIL-STD-129. Packaging must meet commercial standards as outlined in the procurement document, ensuring each unit is sealed and protected from damage, while exterior shipping containers must be suitable for safe transport at the lowest cost to the designated delivery point at Hurlburt Field, Florida. All markings and packaging adhere strictly to Medical Marking Standard No. 1, and suppliers must provide the source and part number being offered. The item is identified by NSN 6510-00-721-9808 with a single purchasing quantity, under solicitation SPE2DS-26-T-305U, response deadline August 10, 2026, and delivery required within twenty days after award. Technical and quality requirements referenced under RP001 and RQ011 are governed by the DLA Master List of Technical and Quality Requirements, and the acquisition is subject to Defense Information potentially applicable under RD003.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 3 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
GLOVE, DISPOSABLE
Solicitation # SPE2DS-26-T-307A
The contract is for 8 boxes of disposable bear claw nitrile gloves, each box containing 100 gloves, totaling 800 gloves. The gloves are designed for enhanced grip in both wet and dry conditions, featuring a longer and thicker construction compared to standard gloves, with an extended beaded cuff that provides a form-fitting seal. They are ambidextrous, non-sterile, latex-free, powder-free, and colored sand. The unit of issue is strictly defined as a box of 100, and all supplies must comply with DLA packaging and quality requirements as outlined in the DLA Master List of Technical and Quality Requirements, with the applicable revision controlled by the solicitation issue or award date depending on the acquisition size. Government identification must be removed from any non-accepted supplies per requirement RQ011. The item is identified by NSN 8415-01-600-6039 under purchase request 7017729616, with a delivery deadline of 20 days after order placement. The solicitation, numbered SPE2DS-26-T-307A, was posted on August 4, 2026, with responses due by August 10, 2026. The contract falls under NAICS code 339113 for medical rubber product manufacturing and is managed by the Department of Defense’s Medical Supply Chain MD Surg FSF. Performance is required at Fort Bragg, North Carolina, 28310, with Marc Canalichio designated as the primary point of contact for inquiries via phone or email. The procurement is a federal solicitation accessible through DIBBS.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 3 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
NEEDLE, HYPODERMIC
Solicitation # SPE2DS-26-T-306T
The contract is for the procurement of 25 hypoxydermic needles designated for spinal anesthesia, each featuring a short angular side bevel, a stylet, and a 20-gauge 3.5-inch length with a Luer connection. The needles are individually sealed and sold in packages of 25 units, identified by the NSN 6515-01-156-2419. Full technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, with compliance determined by the revision in effect on the solicitation or award date. Packaging must meet DLA standards, and tailored higher-level quality requirements apply to both manufacturers and non-manufacturers. The solicitation, issued under SPE2DS-26-T-306T, requires bidders to clearly state the source and part number being offered, with a response deadline of August 10, 2026, and a delivery window of 10 days after order placement. The procurement is administered by the Department of Defense’s Medical Supply Chain under NAICS code 339113, with covered defense information applicable and performance expected within the United States.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 3 hours ago

DEADLINE

in 6 days
View Details

More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

Same awarding agency

NAICS: 339112
New
DIBBS
FLASHLIGHT, EYE EXAM
Solicitation # SPE2DS-26-T-306D
The contract is for the procurement of three disposable, self-contained eye examination flashlights with a blue spot beam, identified by NSN 6515-00-185-9482 and purchase request 7017744837, under solicitation SPE2DS-26-T-306D. The item is classified as a medical device regulated by the FDA, requiring verification by the contracting official through EBS referral with detailed manufacturer and bidder information. Each unit must be packaged in a sealed commercial container that protects against damage and must comply with Medical Marking Standard No. 1, which supersedes MIL-STD-129. Exterior shipping containers must ensure safe, cost-effective delivery via common carrier to the designated destination point. The device must be sourced with a specified manufacturer part number and supplier, and bidders must clearly state their source and part number in their submission. Delivery is required within 55 days of contract award, with a firm delivery date of August 4, 2026, and delivery terms are FOB destination. The units must be marked in accordance with Medical Marking Standard No. 1, and packaging must adhere to commercial standards as specified in the procurement document, not MIL-STD-2073-1E despite earlier references. The shipment is destined for APO AP 96260-5479 for U.S. medical material center purposes, with a secondary freight address at Camp Carroll, Korea. The unit of issue is each (EA), quantity is fixed at three with zero variance allowed, and the unit price is $3.00 for a total contract value of $9.00. All technical and quality requirements are drawn from the DLA Master List of Technical and Quality Requirements, and packaging, marking, and delivery procedures are strictly governed by DLA’s medical logistics directives.
Surgical and Medical Instrument Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339112
New
DIBBS
SUPPORT, BOW
Solicitation # SPE2DS-26-T-306E
The contract specifies the procurement of two aluminum bow supports, each 12 inches nominal in size, designed for use with finger traps and identified by NSN 6515-01-490-5116. These items are intended for medical applications and must comply with all associated technical and quality requirements outlined in the DLA Master List of Technical and Quality Requirements, with applicable references marked by R or I numbers. Packaging and marking must adhere to Medical Marking Standard No. 1, which replaces MIL-STD-129, and each unit must be sealed in a suitable container to prevent damage, with exterior shipping containers meeting commercial standards for safe and cost-effective delivery via common carrier to the designated point of performance in APO, ZIP 96260-5479. The unit of issue is each, and bidders are required to clearly indicate the source and part number being offered. All provisions are governed by the Federal Acquisition Regulation and the DLA Packaging Requirements, and the item must be delivered within 84 days of award. The solicitation, issued under SPE2DS-26-T-306E, was posted on August 4, 2026, with responses due by August 10, 2026, under NAICS code 339112 for medical device manufacturing, and is managed by the Department of Defense’s Medical Supply Chain.
Surgical and Medical Instrument Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 6 days
View Details
NAICS: 334511
New
DIBBS
CABLE, INVASIVE BLOOD P
Solicitation # SPE2DS-26-T-306F
The contract is for a right-angle invasive blood pressure transducer cable with an Edwards connector, intended for use with oval transducers, and is classified under the NSN 6515-01-615-0921. The unit of issue is each, with a quantity of three units required at a unit price of $3.00, totaling $9.00. Delivery is set for 84 days after award, with delivery terms FOB destination, and no variance is permitted in quantity. Inspection and acceptance occur at the destination point. The item is regulated by the FDA, requiring referral to a product specialist in EBS with full bidder and manufacturer details including part numbers. Packaging must comply with the Medical Marking Standard No. 1, which supersedes MIL-STD-129, and each unit must be sealed in commercial-grade containment to prevent damage, with outer shipping containers ensuring safe, low-cost transport to the delivery point. The packaging and marking instructions must strictly adhere to the specified commercial standards outlined in SPE2DS-26-T-306F, and the material is subject to defense information coverage under RD003. The contract references DLA’s technical and quality requirements identified by R and I numbers and mandates that bidders explicitly state the source and part number of the supplied item. The delivery address is APO AE 09227-0000, with freight shipping directed to Kaiserslautern, Germany, and the original required delivery date is August 4, 2026.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339112
New
DIBBS
FORCEPS, INTESTINAL
Solicitation # SPE2DS-26-T-306S
The item is a Meeker intestinal forceps with an overall nominal length of 10.75 inches and a right-angle design, intended for surgical use in intestinal procedures. It is identified by NSN 6515-01-499-5074 and sold in units of one each, with a single unit ordered under purchase request 7017314307. Delivery is required within 20 days after order award. The solicitation, numbered SPE2DS-26-T-306S, was posted on August 4, 2026, with responses due by August 10, 2026, and falls under NAICS code 339112 for surgical and medical instrument manufacturing. The contract is issued by the Department of Defense through the Medical Supply Chain MD Surg FSF, with performance to occur in Hampton, Virginia. The technical specifications are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, and must comply with the revision in effect on the solicitation or award date depending on acquisition size. Packaging must adhere to DLA standards, and any non-accepted supplies must have government identification removed prior to return. Bidders are required to clearly state the source and part number being offered. Additionally, the contract is subject to Covered Defense Information requirements, indicating that the item may involve sensitive or controlled data under federal procurement protocols.
Surgical and Medical Instrument Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 6 days
View Details
NAICS: 325611
New
DIBBS
SANITIZER, HAND
Solicitation # SPE2DS-26-T-305X
The contract is for a hand sanitizer classified as a waterless cleanser with an alcohol base containing 70% ethyl alcohol, unscented, and packaged in 4 fluid ounce bottles. Each unit of issue is a package containing 24 bottles, and the total order consists of two such packages. The item must have a mandatory 36-month shelf life that is non-extendable, and no more than five months may have passed from the date of manufacture to the date of delivery to the government. Packaging must comply with DLA packaging requirements, and the product must meet all technical and quality standards outlined in the DLA Master List of Technical and Quality Requirements. Government identification must be removed from any non-accepted supplies. The item is identified by NSN 8520-01-346-9200, with a delivery deadline of 20 days after contract award. The solicitation was issued under SPE2DS-26-T-305X, with a response deadline of August 10, 2026, and is managed by the Department of Defense’s Medical Supply Chain under the office in San Antonio, Texas. Primary point of contact is Mary-Kathryn Donahue, reachable via email and phone provided.
Soap and Other Detergent Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 6 days
View Details
NAICS: 327992
New
DIBBS
MEDICAL SUPPLY SET, OBS
Solicitation # SPE2DS-26-T-306G
The contract specifies the procurement of three Medical Supply Sets for Obstetrical Field Use, each containing a complete sterile kit designed for emergency obstetrical care. Each set includes sterile exam gloves, an obstetrical napkin, antiseptic towelettes, umbilical cord clamps, a disposable scalpel, a plastic apron, a 17x24 inch plastic-lined underpad, two 13x19 inch disposable towels, a 40x48 inch drape sheet, a plastic placenta bag, two plastic twist ties, a 2-ounce bulb syringe, four sterile 4x4 inch gauze sponges, a sterile foil baby bunting, and a newborn diaper, all packed in an OB box. The items are regulated by the FDA and must be supplied with full source and part number disclosure. Packaging and labeling must comply strictly with DLA’s Medical Marking Standard No. 1, superseding MIL-STD-129, and adhere to DLA packaging requirements RP001. Units must be individually sealed and shipped in commercial outer containers suitable for safe transit by common carrier under the lowest cost terms, with no parcel post permitted. Delivery is FOB destination with zero tolerance for quantity variance and a required delivery date of August 6, 2026. Two sets are destined for USS Ronald Reagan, and one for USS Zumwalt, with shipments required to be made via traceable means using DLA’s VSM system and RDD 777 protocol. All technical and quality requirements from the DLA Master List take precedence over commercial standards like ASTM D3951, and suppliers must confirm FDA compliance through EBS referral prior to award.
Ground or Treated Mineral and Earth Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 6 days
View Details
NAICS: 336413
New
DIBBS
DRY FIRE MAGAZINE, P
Solicitation # SPE2DS-26-T-306A
The dry fire magazine is a non-functional training aid designed exclusively for resetting the trigger assembly of a 9mm pistol during marksmanship drills. It has precise dimensional requirements: length between 5.05 and 5.07 inches, height between 1.56 and 1.58 inches, width between 1.19 and 1.21 inches, and a cubic measure of 9.53 cubic inches. It is incapable of holding any ammunition and serves solely as a mechanical training device to simulate magazine insertion and trigger manipulation without live rounds. The unit of issue is each, and the item is identified by NSN 6910-01-708-4254 with a procurement quantity of 20 units. This acquisition is governed by DLA packaging and technical requirements referenced in the DLA Master List of Technical and Quality Requirements, with compliance determined by the version in effect on the solicitation or award date. Removal of government identification from non-accepted supplies is mandated under RQ011. The contract solicitation, numbered SPE2DS-26-T-306A, was posted on August 4, 2026, with responses due by August 10, 2026. The procurement falls under NAICS code 336413 and is managed by the Department of Defense’s Medical Supply Chain MD Surg FSF. Delivery is required within 20 days of award, and performance is specified to occur at FPO, ZIP 96673. The primary point of contact for inquiries is Tiffany Parker, reachable via email and phone provided.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339112
New
DIBBS
TUBING, TRANSDUCER
Solicitation # SPE2DS-26-T-306K
The item is a disposable A-line transducer tubing, 60 inches in length, designed for use with A-line transducers and equipped with a squeeze flush device. It is packaged in units of 20 each, identified by NSN 6515-01-500-7556, and must meet a strict shelf-life requirement of 36 months from the date of manufacture, with no more than five months elapsed between manufacturing and delivery to the government. The product is subject to DLA packaging standards and incorporates technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements. Removal of government identification from non-accepted supplies is prohibited. The solicitation, issued under SPE2DS-26-T-306K, is for a single packaging unit with a delivery deadline of 20 days after award, and performance is required at Fort Bliss, Texas. The contract is managed by the Department of Defense’s Medical Supply Chain under the NAICS code 339112, with Vernon Stevenson listed as the primary point of contact.
Surgical and Medical Instrument Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 6 days
View Details
NAICS: 334511
New
DIBBS
CATHETERIZATION KIT, UR
Solicitation # SPE2DS-26-T-305W
The contract specifies the procurement of a urethral catheterization kit, designated as a 16FR Foley catheter with a 2000 mL anti-reflux valve bag, packaged in units of 10 per pack (PG). Each kit includes sterile drapes, underpads, specimen containers, five prep balls, povidone-iodine solution, gloves, prefilled syringes with 10 CC sterile water and lubricant, and forceps. The product must have a 36-month shelf life, with no more than five months elapsed from manufacture to government delivery. Packaging must comply with DLA Packaging Requirements, Medical Marking Standard No. 1, and ASTM D3951, with labeling requirements including NSN, manufacturer and CAGE code, manufacture and expiration dates, contract and lot numbers. The item is regulated by the FDA and requires referral via EBS for confirmation. Two delivery locations are specified: USS ZUMWALT DDG 1000 in FPO AP and Fort Campbell, KY, with shipments prohibited from using parcel post and requiring traceable means. Delivery is due within 20 days from order with zero quantity variance permitted. The unit of issue is PG, and the NSN is 6515016152124. Manufacturer part numbers 899616 from Cardinal Health 200, LLC and C. R. Bard, Inc. are accepted. Palletization and marking must adhere strictly to DLA standards, and all packaging documentation must supersede any conflicting requirements.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 6 days
View Details