Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

NEOPRENE GASKETS

Active
N5005426Q0167Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Mid-Atlantic Regional Maintenance Center is soliciting neoprene gaskets under a combined synopsis/solicitation issued through the Simplified Acquisition Procedures outlined in FAR Part 13 and aligned with FAR 12.6 for commercial items. The solicitation number is N5005426Q0167, posted on August 5, 2026, with a firm response deadline of August 12, 2026, at 2:00 PM EDT. This is a full Small Business Set Aside, exclusively reserved for small businesses as defined by the SBA, and the NAICS code 339991 applies. All gaskets must be new, with no refurbished or used parts permitted, and must conform to the technical requirements detailed in the attached Statement of Work. The solicitation is published solely online via SAM.gov and PIEE, with no paper copies available. The contract incorporates all provisions and clauses in effect under FAC 2026-01 and DFARS Change Notice 20260507. The primary point of contact is Erica Crandall, reachable at erica.collins1@navy.mil, and the performing office is located at Norfolk, Virginia, 23511-2124, under the Department of Defense.

General Info

Small business set aside for new neoprene gaskets via SAM.gov, deadline August 12, 2026, Norfolk, VA.

Agency

Department Of Defense → Mid Atlantic Reg Maintenance CtrView Agency

NAICS

339991 - Gasket, Packing, and Sealing Device ManufacturingView NAICS

Place of Performance

VA

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseCombined Synopsis
Posted

Combined Synopsis

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Mid Atlantic Reg Maintenance Ctr
Contacts1 person available
OfficeNORFOLK, VA, 23511-2124, USA
Organization / Agency
Department Of Defense → Mid Atlantic Reg Maintenance Ctr
View Agency Profile
Office AddressNORFOLK, VA, 23511-2124, USA
Contacts
Erica Crandall
contact@example.gov

Full Description

Show more
This is a COMBINED SYNOPSIS/SOLICITATION for commercial items prepared in accordance with the information in Federal Acquisition Regulation (FAR) Part 13 using Simplified Acquisition Procedures (SAP). This announcement constitutes the only solicitation; a written solicitation will not be issued. PAPER COPIES OF THIS SOLICITATION WILL NOT BE AVAILABLE. This combined synopsis/solicitation will be posted to the System for Award Management at https://sam.gov/ and/or Procurement Integrated Enterprise Environment (PIEE) at https://piee.eb.mil. This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR 12.6, as supplemented with additional information included in this notice.The RFQ number is N5005426Q0167. This solicitation documents and incorporates provisions and clauses in effect though FAC 2026-01 and the DFARS Change notice 20260507. The Mid-Atlantic Regional Maintenance Center (MARMC) requests responses from qualified sources capable of providing the Neoprene Gaskets that are identified in the attached Statement of Work (SOW). All parts shall be new. No refurbished or used parts will be accepted.

Similar Contracts

Same NAICS industry code

NAICS: 339991
New
DIBBS
GASKET
Solicitation # SPE7L4-26-U-1055
The contract solicitation SPE7L4-26-U-1055 seeks 31 gaskets identified by NSN 5330-01-701-0239 under a Total Small Business Set-Aside, with a maximum contract value of $350,000 and a delivery deadline of 97 days after order placement. The item is classified as a commercial item and must be free of asbestos, with packaging strictly compliant with MIL-DTL-117, Type II, Class C, Style 1, using a medium-duty, waterproof, greaseproof, opaque bag for all Direct Vendor Delivery, Foreign Military Sales, and stock shipments, particularly due to UV sensitivity of FSC 5330/5331 components. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, including special marking code 32 for shelf-life items, and all units must be uniquely identified per MIL-STD-130N with UHF RFID or 2D Data Matrix barcoding. The contract includes strict compliance with safeguarding covered defense information under 252.204-7012 and NIST SP 800-171 requirements, with mandatory cyber incident reporting, and prohibits procurement of covered defense telecommunications equipment from restricted entities. Invoicing is required through WAWF, with payment subject to accelerated payments to small business subcontractors, and inspection and acceptance occur at the destination by the Government under the fixed-price inspection clause. The solicitation mandates full representation of small business status and UEI/CAGE codes, with additional disclosures required for hazardous materials under 29 CFR 1910.1200 and for any covered defense telecommunications products. All deliveries are restricted to the continental United States under FOB Origin terms, and offers are evaluated on price and other factors, not solely on lowest cost. Deviations from standard FAR clauses apply throughout, particularly under Deviation 2026-00038, affecting clauses related to contract type, payment, subcontracting, and cybersecurity, with additional compliance required for whistleblower rights, restrictions on forced arbitration, and prohibitions on hexavalent chromium and toxic materials.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 8 hours ago

DEADLINE

in 15 days
View Details
NAICS: 339991
New
DIBBS
GASKET
Solicitation # SPE7L1-26-T-916W
The contract is for the procurement of 600 linear feet of gasket material identified by NSN 5330-01-557-0920 and part numbers X-113BT and TRIMLIK-X-113BT, with a 10% allowable increase in quantity for a maximum delivery of 660 feet. The unit of issue is the foot and the contract总价 is $600 based on an implied unit price of $1.00 per foot. Delivery is required within five days after award to the specified location in Albany, GA, under FOB Origin terms, with inspection and acceptance occurring at the destination. Packaging must strictly comply with MIL-STD-2073-1E and DLA’s RP001 packaging requirements, including cold/dry preservation methods, and all items must be marked per MIL-STD-129 with no special marking required. The item is not classified as hazardous, but compliance with hazardous material protocols under IP025 and OSHA’s Hazard Communication Standard (29 CFR 1910.1200) is mandatory if applicable, along with submission of Safety Data Sheets prior to award. Radioactive material thresholds are defined, and notification is required if any component exceeds specified activity levels. The contractor must use WAWF for invoicing and must have a valid UEI and CAGE code, while also certifying compliance with regulations regarding covered defense telecommunications equipment and subcontractor disclosures. The award mechanism is likely Low Price Technically Acceptable, with proposals submitted electronically through DIBBS before the August 17, 2026 deadline. Special clauses cover whistleblower rights, former DoD official compensation restrictions, third-party data limitations, and government work product control, indicating a high level of regulatory oversight. The contract does not specify a contract type but involves a single CLIN with no options or indefinite-delivery elements, and no key personnel or security clearance requirements are identified.
LAND SUPPLY CHAIN

POSTED

about 8 hours ago

DEADLINE

in 12 days
View Details
NAICS: 339991
New
DIBBS
SEAL, PLAIN
Solicitation # SPE7LX-26-U-9284
The contract is for 2,029 plain seals with the NSN 5330-01-504-8614 under solicitation SPE7LX-26-U-9284, issued by the Department of Defense’s Strategic Acquisition Program Directorate. The solicitation is a total small business set-aside, meaning only qualifying small businesses may respond, and it is governed by the NAICS code 339991. Technical and quality requirements are incorporated by reference from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for this simplified acquisition. Packaging must comply with DLA standards, and any non-accepted supplies must have government identification removed prior to return. Source approval documentation must be submitted in accordance with the specified documentation requirements. Delivery is required within 54 days after award, and all responses must be submitted by August 20, 2026. The primary point of contact is Theodore Misiolek, reachable via phone or email, and additional details are available through the DIBBS portal.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 8 hours ago

DEADLINE

in 15 days
View Details
NAICS: 339991
New
DIBBS
SEAL, OIL, HORIZONTAL
Solicitation # SPE7LX-26-U-9310
The contract is for 538 units of a horizontal oil seal with NSN 5330-01-662-9969, solicited under number SPE7LX-26-U-9310 with a response deadline of August 20, 2026, and a required delivery within 98 days of award. This is a total small business set-aside under FAR 19.5, targeting NAICS code 339991 for other miscellaneous manufacturing, and is issued by the Department of Defense’s Strategic Procurement Program Directorate. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless superseded by an amendment. Packaging must comply with DLA procurement standards, and non-accepted supplies must have all government identification removed prior to return. All data provided is proprietary or insufficient for competitive bidding, indicating the requirement is based on proprietary specifications. The primary point of contact is Theodore Misiolek, reachable via email and phone provided.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 8 hours ago

DEADLINE

in 15 days
View Details
NAICS: 339991
New
DIBBS
O-RING
Solicitation # SPE4A6-26-T-12TW
This contract solicits 262 O-RINGS with NSN 5331-00-004-5061 under solicitation number SPE4A6-26-T-12TW, with a response deadline of August 13, 2026, and a delivery requirement of 161 days after award. The item must comply with all technical and quality requirements referenced by R and I numbers from the DLA Master List of Technical and Quality Requirements, with the version in effect on the solicitation issue date controlling for simplified acquisitions. Packaging must adhere to DLA standards, and all supplies must be stripped of government identification if not accepted. Contractors are required to retain supply chain traceability documentation per DLA Directive Procurement Note C03 from August 2016. Documentation for source approval requests is mandatory, and the product must be free of asbestos, with any alternative materials requiring prior approval under Clause L30 and Provision 4 conditions. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute chemicals must be submitted for approval unless explicitly authorized by specification requirements. Covered defense information may apply, and the contract is administered by the ASC Commodities Division under the Department of Defense, with performance to occur in Tracy, California, and primary point of contact being Stuart Dowdy at stuart.dowdy@dla.mil.
ASC COMMODITIES DIVISION

POSTED

about 8 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339991
New
DIBBS
O-RING
Solicitation # SPE7LX-26-U-9309
The contract solicitation SPE7LX-26-U-9309 is for the procurement of O-RINGS with NSN 5331-01-269-4323, under a Total Small Business Set-Aside, with an estimated quantity of 1,746 units and a maximum contract value of $350,000. The procurement is structured as an Indefinite Delivery Contract with deliveries required FOB Origin and an 84-day lead time after order placement. All units must comply with stringent military packaging standards including MIL-DTL-117 Type II, Class C, Style 1 for waterproof and greaseproof bagging, and MIL-STD-2073-1E for preservation and marking, with a shelf life of 180 months under controlled dry conditions and no extendability. Labeling must adhere to MIL-STD-129, including mandatory Data Matrix barcodes and special marking code 32 for shelf-life tracking, while prohibiting asbestos as defined by FED-STD-313 and hexavalent chromium, and requiring full compliance with OSHA’s Hazard Communication Standard for any hazardous materials. The solicitation mandates electronic submission through DIBBS by August 20, 2026, and all payments must be processed via Wide Area WorkFlow with standardized electronic invoicing formats. Technical and quality requirements are sourced from the DLA Master List of Technical and Quality Requirements, referenced through R and I numbers, and contractors must affirm small business status and provide UEI and CAGE codes as required for socioeconomic representation. The contract includes a comprehensive suite of FAR and DFARS clauses governing equal opportunity, trafficking in persons, employment verification, cybersecurity safeguards such as NIST SP 800-171 and safeguarding covered defense information, export controls, environmental protections, subcontracting for commercial items, inspection at destination by the government, accelerated payments to small business subcontractors, and prohibitions on procurement from communist Chinese military companies or covered defense telecommunications equipment. Payment and administrative details are not fully specified in the solicitation and will be finalized upon award, but a primary point of contact is Theodore Misiolek at the Strategic Acq Program Directorate. The contract does not specify evaluation factors, options, key personnel requirements, or security clearances, and no formal attachments are listed beyond operational references to standards.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 8 hours ago

DEADLINE

in 15 days
View Details
NAICS: 339991
New
DIBBS
COVER, EXHAUST LINE
Solicitation # SPE8EF-26-Q-0167
The contract pertains to the procurement of four units of a cover for an exhaust line, identified by NSN 1730-00-691-5565, under solicitation SPE8EF-26-Q-0167. The requirement is priced on a firm fixed price basis with no tolerance for quantity variance, meaning exactly four units must be delivered. The item must be delivered within 60 days after the award date, with both inspection and acceptance occurring at the origin. Delivery is FOB destination, and the shipping address is located at Al Udeid Air Base in Qatar, with a final parcel post address in APO AE 09309-9998. Packaging must strictly comply with MIL-STD-2073-1E and DLA packaging requirements, including specific preservation methods, wrapping materials, and unit container type D3, while marking must adhere to MIL-STD-129 with no special markings required. Palletization must also follow DLA’s procurement guidelines. The contract incorporates cybersecurity requirements via CMMC Level 2 Self-Assessment and defines covered defense information, with quality and technical standards sourced from the DLA Master List. The purchaser is a federal agency under the Department of Defense, with Sharon Forde listed as the primary point of contact. The material need date is May 16, 2023, and the contract includes internal government codes for tracking and logistics coordination.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 8 hours ago

DEADLINE

in 7 days
View Details
NAICS: 339991
New
DIBBS
O-RING
Solicitation # SPE7LX-26-U-9325
The contract solicitation SPE7LX-26-U-9325 is for the procurement of 5,156 O-rings with NSN 5331-01-537-0498 under an indefinite-delivery contract structure, with a maximum value of $350,000.00 and no guaranteed minimum quantity unless delivery orders are issued. Delivery is required within 128 days of the actual delivery order, with FOB Origin terms placing risk transfer on the contractor upon shipment from their facility. All items must comply with MIL-STD-2073-1E for packaging using Code U, D3 unit containers, E5 intermediate containers, and preservation Method 33 with dry/clean handling and hardboard cushioning. Marking must adhere strictly to MIL-STD-129, including standardized labeling with NSN, contract number, and quantity, and mandatory 2D Data Matrix barcoding for traceability. The contractor must ensure hazard communication compliance through OSHA’s 29 CFR 1910.1200, submitting Safety Data Sheets, hazard warning labels, and a table of exempted materials if any items fall under alternative federal labeling statutes. Inspection and acceptance occur at the destination per FAR 52.246-2, with the government assuming full responsibility for final quality control. Compliance with DFARS clauses is mandatory, including safeguarding covered defense information under 252.204-7012, prohibition of hexavalent chromium, restrictions on Chinese military company products, and cybersecurity controls aligned with NIST SP 800-171. Electronic invoicing via WAWF is required, and offerors must hold a valid UEI and CAGE code. Representations for small business size status and socioeconomic categories including 8(a), HUBZone, SDVOSB, WOSB, and EDWOSB must be provided, with joint ventures required to disclose partner UEIs. The solicitation incorporates deviations for multiple FAR and DFARS clauses effective February 2026, including equal opportunity, combating trafficking in persons, employment verification, sustainable product requirements, and cybersecurity measures. Payment and contract administration details, including DoDAACs and COR/COTR information, will be populated in the award documentation. The solicitation is being processed electronically through DIBBS with a response deadline of August 20, 2026
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 8 hours ago

DEADLINE

in 15 days
View Details
NAICS: 339991
New
DIBBS
FELT, MECHANICAL, PRE
Solicitation # SPE7L1-26-T-917K
This contract pertains to the procurement of FELT, MECHANICAL, PREFORMED items identified by the NSN 5330-00-496-0967 and specific part numbers from qualified suppliers including LINEAR MOTION LLC, ONTIC ENGINEERING & MANUFACTURING, INC, and MISTEQUAY GROUP LTD. The item is classified as a commercial item and must comply with strict packaging requirements mandated by MIL-DTL-117, TYPE II, CLASS C, STYLE 1, ensuring protection in a medium duty, waterproof, greaseproof, and opaque bag to prevent UV degradation, applicable to all delivery types including direct vendor delivery, foreign military sales, and stock shipments. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, with no special marking required, and palletization must follow DLA’s packaging guidelines. The contract specifies a delivery of 57 units at a unit price of $57.00, totaling $3,249.00, with FOB origin terms, zero quantity variance allowed, and inspection and acceptance occurring at destination. The required delivery date is 55 days from award, with a need ship date of November 4, 2025, and an original required delivery date of October 21, 2025. All materials must be free of asbestos as defined by FED-STD-313, and transportation logistics are governed by DLA procedural notes C19 and C20. The contract reference is SPE7L1-26-T-917K, solicited under a federal acquisition framework, with the point of contact being Kallie Regula of the Department of Defense’s Land Supply Chain.
LAND SUPPLY CHAIN

POSTED

about 8 hours ago

DEADLINE

in 12 days
View Details
NAICS: 339991
New
DIBBS
O-RING
Solicitation # SPE7M1-26-Q-1336
This contract specifies the procurement of 2,000 O-rings made from synthetic rubber, identified by the National Stock Number 5331-00-248-3849 and part number MS29513-019, with detailed technical requirements aligned to SAE AS29513 Revision C dated October 1, 2016. The item is classified as a commercial item and must be manufactured by a supplier approved on the Qualified Products List (QPL); only QPL-approved manufacturers are eligible at the time of award. The product has a non-extendable shelf life of 180 months and is designated as a Type I (Code Y) item, with packaging and preservation strictly governed by MIL-STD-2073-1E and MIL-STD-129. Mercury and mercury-containing compounds are prohibited from direct contact with the item or its packaging, with exceptions only for functional uses in batteries, lighting, instruments, sensors, controls, weapon systems, or NAVSEA-specified reagents, and any such components must meet additional containment standards. Packaging must be in a medium-duty, waterproof, greaseproof, and opaque bag per MIL-DTL-117, Type II, Class C, Style 1, especially for direct vendor delivery, foreign military sales, or stock shipments. Preservation methods require dry, clean packaging with no mercury-based compounds, and markings must comply with MIL-STD-129, including the special marking code for Type I shelf life. The delivery is FOB origin with a firm fixed price and zero variance allowed in quantity, to be delivered within 126 days after contract award, with inspection and acceptance occurring at the destination. The contract is subject to all technical and quality requirements referenced in the DLA Master List, and the sole point of performance and delivery is Tinker AFB, Oklahoma.
MARITIME SUPPLY CHAIN

POSTED

about 8 hours ago

DEADLINE

in 12 days
View Details
NAICS: 339991
New
DIBBS
SHIELDING GASKET, ELECTRONIC
Solicitation # SPE7MX-26-R-X039
The contract centers on the procurement of a shielding gasket, electronic, identified by NSN 5999-01-506-4338 and part number AVIATION DEVICES AND ELECTRONIC P/N AG736000-01, under solicitation SPE7MX-26-R-X039 issued by the Land Supplier Operations SMSG under the Department of Defense. It is an indefinite-delivery contract with a guaranteed minimum value of $2,004 and a maximum obligated amount of $1,491,112, allowing orders to be placed over a three-year period from the award date. The contract uses a firm-fixed price structure with pricing structured in four quantity ranges, from 161 to 3,852 units, based on estimated annual demand of 2,569 units. Deliveries are FOB origin, with final inspection and acceptance occurring at the destination, and all items must comply strictly with MIL-STD-2073-1E for packaging and preservation, including a dry clean preservation method, U packaging code, and BE unit container. Marking and labeling must adhere to MIL-STD-129 with Data Matrix or Code 128 barcoding, and bare part identification is governed by MIL-STD-130 via RQ017, requiring NSN, part number, and traceable lot or serial codes. Special labeling is required for test samples: “Product Verification Test Samples – Do Not Post to Stock,” along with contract and lot numbers. The contractor must supply full traceability documentation per DFARS 252.217-7026 and comply with Buy American and specialty metals requirements under 10 U.S.C. 4753, as well as DFARS restrictions on hexavalent chromium and foreign sourcing. Cybersecurity compliance with NIST SP 800-171 is mandatory for handling controlled unclassified information. All invoicing must be submitted via EDI, and the contractor must hold a valid UEI and CAGE code, with socioeconomic status certifications required for small business and other designated categories. Evaluation will be based on a balanced trade-off approach where price is paramount but not sole; past performance, proposed delivery, and surge and sustainment capabilities will be assessed, with award made to the offeror providing best value. The contracting officer retains full authority to inspect and accept goods, subject to material certification
LAND SUPPLIER OPERATIONS SMSG

POSTED

about 8 hours ago

DEADLINE

in 30 days
View Details
NAICS: 339991
New
DIBBS
RETAINER, PACKING
Solicitation # SPE7L1-26-T-916M
The contract solicitation is for the procurement of two retainers, packing, identified by NSN 5330-00-568-5838, under purchase request 7017756175, with a required delivery within 20 days after award. This solicitation, numbered SPE7L1-26-T-916M, was posted on August 5, 2026, and responses are due by August 17, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements accessible via the DLA website, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless amended. Packaging must comply with DLA packaging standards, and non-accepted supplies must have all government identification removed prior to return. The solicitation is classified under NAICS code 339991, issued by the Department of Defense’s Land Supply Chain, and is open to federal contractors. Primary point of contact is Kristina Derry, reachable via email and phone provided in the contract data.
LAND SUPPLY CHAIN

POSTED

about 8 hours ago

DEADLINE

in 12 days
View Details

More opportunities from Department Of Defense → Mid Atlantic Reg Maintenance Ctr

Same awarding agency

NAICS: 541330
New
Federal
Mid-Atlantic Regional Maintenance Center (MARMC) Technical and Professional Services
Solicitation # N5005426R0006
This solicitation seeks technical and professional support services for the Mid-Atlantic Regional Maintenance Center in Norfolk, Virginia, under the Seaport-NxG Multiple Award Contract, with all bids restricted to service-disabled veteran-owned small businesses. The requirement is administered by the Department of Defense through the Mid Atlantic Reg Maintenance Ctr, with the solicitation number N5005426R0006 and a NAICS code of 541330 for scientific and technical consulting services. All responses must include the offeror’s active Seaport-NxG contract number, and submissions are governed by the full terms of the Seaport-NxG IDIQ contract, with only task order-specific clauses expanded in this document. The deadline for proposals is August 3, 2026, at 6:00 PM EST, following an amendment that extended the deadline for questions to July 17, 2026, and incorporated PIEE language. Attachments required for submission include the QASP, DD254, multiple CDRLs specifying status and end-of-task reporting, a staffing plan, past performance references, a price proposal, and the SF1408-14f form. Point of contact for inquiries includes Cindy T. Sampson and Jake Grady, both affiliated with the Navy. The place of performance is fixed in Norfolk, Virginia, and while the estimated contract value and detailed evaluation criteria are not available due to system limitations, the structure and documentation requirements indicate a rigorous oversight framework for contractor performance and deliverables.
Engineering Services

POSTED

about 13 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336611
New
Federal
Combat Systems Repair IDIQ
Solicitation # N5005426R0003
The Mid-Atlantic Regional Maintenance Center is soliciting proposals under IDIQ-MAC N5005426R0003 to establish a multi-award contract for the repair, refurbishment, and modernization of U.S. Navy Surface Combat and C4I systems, including OE-82 and OE-570 UHF SATCOM antennas, AM-6534/SSR-1 and AM-7317A/SSR amplifiers, NMT series radomes, MK-32 Surface Vessel Torpedo Tubes, SLQ-32 antenna enclosures, MK-36 and MK-53 decoy launching systems, and MK-5 Ready Service Lockers, with certification required for the decoy systems. Performance is primarily centered within a 50-mile radius of Naval Station Norfolk, Virginia, but may extend to other locations within the continental United States or overseas as needed. The Contractor will operate independently, providing all management, technical, labor, logistics, materials, equipment, and facilities required to execute the work without acting as a government agent. This is a Firm Fixed Price contract with a base year and four one-year optional periods, governed by FAR Part 15 procedures. The NAICS code 336611 applies, with a small business size standard of 1,300 employees. Work will be administered by MARMC in Norfolk, Virginia, and all proposals must be submitted by the deadline of August 17, 2026. Point of contact for inquiries includes Alex Nienberg and Jake Grady, with additional details available through the SAM.gov portal.
Ship Building and Repairing

POSTED

7 days ago

DEADLINE

in 12 days
View Details
NAICS: 325992
Federal
Supply of Naval-Grade Lubricants and Insulation MaterialsThe contract entails the supply of naval-grade lubricants, insulation materials, and sealing compounds specifically approved for use in shipboard motor overhaul operations aboard U.S. Navy vessels, with all products required to meet stringent military performance standards. These materials are critical for maintaining the operational readiness and longevity of marine motors, ensuring they function reliably under extreme conditions encountered at sea. The procurement is scoped to support maintenance activities centered at the Mid Atlantic Regional Maintenance Center in Norfolk, Virginia, with the place of performance clearly designated to this key naval hub. As a subcontract under the Department of Defense, this agreement falls under NAICS code 325992, indicating it involves other chemical product and preparation manufacturing, aligning with specialty industrial formulations tailored for defense applications. The contract was posted on July 1, 2026, and is part of a broader effort to secure high-certification materials that comply with strict military specifications, ensuring consistency and safety across the fleet. While no set-aside details or point of contact are provided, the emphasis on military-grade compliance underscores a prioritization of quality, durability, and regulatory adherence over cost or vendor size.
Photographic Film, Paper, Plate, Chemical, and Copy Toner Manufacturing

POSTED

about 1 month ago

DEADLINE

N/A
View Details
NAICS: 335311
Federal
Supply of Replacement Motor Components for Naval Fan OverhaulThe contract involves the supply of certified replacement motor components, including motor windings, bearings, and rotors, specifically for the repair and overhaul of shipboard fan motors in accordance with naval specifications. These parts must meet strict military-grade standards to ensure reliability and performance under the demanding conditions of naval operations. The work is scoped as a subcontract and is intended to support maintenance activities at the Mid Atlantic Regional Maintenance Center, with performance taking place in Norfolk, Virginia, at the ZIP code 23523. The North American Industry Classification System code 335311 indicates the procurement falls under the manufacturing of electric motors, generators, and transformers, emphasizing the technical precision required in production. All components must be certified to conform to naval requirements, ensuring compatibility, durability, and safety on board vessels.
Power, Distribution, and Specialty Transformer Manufacturing

POSTED

about 1 month ago

DEADLINE

N/A
View Details
NAICS: 811310
Federal
Vaneaxial Fan Motor Overhaul – SONAR Control Room (CSER No. 1)The contract pertains to the comprehensive overhaul of a vaneaxial fan motor located in the SONAR Control Room aboard the USS FORREST SHERMAN (DDG 98), requiring full disassembly, detailed inspection, and repair or replacement of worn or defective components as necessary. Work must adhere strictly to U.S. Navy standards, encompassing reassembly of the unit, performance of rigorous operational testing, and formal certification to ensure the system meets all functional and safety requirements for military vessel operations. The overhaul is critical to maintaining environmental controls within the SONAR control room, directly supporting mission-critical sensor functionality and crew safety. This subcontract is managed by the Mid Atlantic Regional Maintenance Center under the Department of Defense, with performance scheduled to occur at a facility in Norfolk, Virginia, 23523. The work falls under NAICS code 811310, indicating it involves industrial machinery and equipment repair and maintenance services. Although no solicitation number or set-aside designation is provided, the contract is positioned as a subcontract, suggesting it may be issued through a prime contractor within the naval support supply chain. The posting date indicates the opportunity was made available in mid-2026, aligning with planned maintenance cycles for the vessel.
Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

about 1 month ago

DEADLINE

N/A
View Details
NAICS: 541330
Federal
Technical Documentation and As-Built ReportingThe contract entails the preparation of comprehensive technical documentation required for Navy acceptance, including as-built drawings, repair logs, test results, and compliance reports, all aligned with specification items 541-22-004 and 541-22-002. This work is critical to ensuring that all systems and components meet official standards and are properly recorded for operational and regulatory purposes. The deliverables must reflect accurate, detailed, and timely records of all modifications, maintenance activities, and performance validations carried out during the project lifecycle. The contract is classified as a subcontract under NAICS code 541330, indicating it falls within engineering services, and is managed by the Mid Atlantic Regional Maintenance Center under the Department of Defense. Performance is primarily located in Norfolk, Virginia, with a ZIP code of 23523, and the work is expected to commence on July 1, 2026. While no solicitation number or set-aside details are provided, the focus remains on delivering high-fidelity documentation to support Navy compliance and readiness requirements.
Engineering Services

POSTED

about 1 month ago

DEADLINE

N/A
View Details
NAICS: 332721
Federal
Specialty Machining and Fabrication SupportThe contract supports the precision machining and fabrication of critical replacement parts for fuel oil purifier overhauls, including bowls, discs, shafts, and housings, with a focus on restoring obsolete or damaged components to original specifications. This work ensures operational readiness of naval equipment by enabling the continued functionality of aging systems through exacting manufacturing standards. All work is to be performed at a primary location in Norfolk, Virginia, with the contract classified under NAICS code 332721 for metal forgings and stampings, indicating a specialized manufacturing scope requiring advanced capabilities. As a subcontract under the Department of Defense’s Mid Atlantic Reg Maintenance Center, the effort directly contributes to fleet maintenance and sustainment timelines, though specific award details and point of contact information are not provided. The solicitation was posted on July 1, 2026, and is intended for qualified contractors capable of delivering high-tolerance components essential to complex machinery restoration.
Precision Turned Product Manufacturing

POSTED

about 1 month ago

DEADLINE

N/A
View Details
NAICS: 333911
Federal
Fuel Oil Purifier Overhaul – #2 UnitThe contract entails a complete overhaul of the #2 Fuel Oil Purifier aboard the USS FORREST SHERMAN (DDG-98), with work to be executed under the same technical specifications and procedural standards previously applied to the #1 unit. This effort is part of routine maintenance to ensure optimal operational readiness and compliance with naval engineering requirements. The scope demands precise adherence to established protocols, including disassembly, inspection, replacement of worn components, reassembly, testing, and certification, all in alignment with the ship’s maintenance schedule and fleet-wide equipment standards. Work will be performed at the designated place of performance in Norfolk, Virginia, with a posted date of July 1, 2026, indicating planned execution in the near future. The contract is classified as a subcontract under NAICS code 333911, which corresponds to the manufacture of industrial machinery, specifically signaling involvement of specialized marine equipment repair services. The overseeing entity is the Mid Atlantic Reg Maintenance Center under the Department of Defense, ensuring alignment with broader naval logistics and readiness objectives. Though no solicitation number or point of contact is provided, the work is intended to support sustained fleet operations through standardized, high-quality maintenance practices.
Pump and Pumping Equipment Manufacturing

POSTED

about 1 month ago

DEADLINE

N/A
View Details
NAICS: 333911
Federal
Fuel Oil Purifier Overhaul – #1 UnitThe contract covers a complete overhaul of the #1 Fuel Oil Purifier aboard the USS FORREST SHERMAN DDG-98, requiring full disassembly, detailed inspection, repair or replacement of all damaged or worn components, and meticulous reassembly to meet Navy technical standards. All work must include rigorous testing and formal certification to ensure operational readiness and compliance with naval specifications, ensuring the purifier functions optimally under demanding maritime conditions. The overhaul is critical to maintaining the ship’s fuel system efficiency and mission capability. The work will be performed at the facility in Norfolk, Virginia, with the contracting activity under the Mid Atlantic Reg Maintenance Center, a component of the Department of Defense. The contract is categorized under NAICS code 333911, indicating specialized machinery manufacturing and repair services. Although the solicitation number and point of contact are not provided, the posting date of July 1, 2026, suggests this is a future procurement intended to support scheduled maintenance cycles for the vessel. The place of performance confirms the work will occur at a designated naval maintenance location within the Norfolk area, aligning with the ship’s homeport and regional depot support infrastructure.
Pump and Pumping Equipment Manufacturing

POSTED

about 1 month ago

DEADLINE

N/A
View Details
NAICS: 541611
Federal
On-Site Technical Support and Integration ManagementThe contract requires on-site technical support and integration management to coordinate activities between non-destructive testing, repair, and coating teams aboard vessels undergoing maintenance. The primary responsibility is to ensure seamless collaboration among these specialized units while aligning all work with the ship’s established maintenance schedule and the timelines set by the Lead Maintenance Activity. This includes proactive planning and real-time adjustments to prevent scheduling conflicts and avoid delays that could impact operational readiness. The work must be performed at the facility in Norfolk and demands a high level of technical coordination and compliance with DoD maintenance protocols. This subcontract falls under NAICS code 541611, indicating it is for management consulting services, and is administered by the Mid Atlantic Regional Maintenance Center under the Department of Defense. Although specific details such as contract value, duration, or point of contact are not provided, the performance location is clearly designated as Norfolk, and the solicitation was posted in June 2026, suggesting an upcoming procurement cycle. The emphasis on integration, timeliness, and regulatory compliance underscores the critical nature of this role in supporting naval maintenance operations and sustaining fleet availability.
Administrative Management and General Management Consulting Services

POSTED

about 1 month ago

DEADLINE

N/A
View Details
NAICS: 238290
Federal
Industrial Coating and Surface PreparationThe contract involves the specialized removal of paint, insulation, and corrosion from crane components to prepare them for non-destructive testing and subsequent repairs, ensuring structural integrity and safety. This surface preparation is critical to support maintenance operations in a maritime environment where exposure to saltwater and extreme conditions accelerates material degradation. Following repair work, the contractor is required to apply high-performance marine-grade protective coatings, engineered to withstand harsh coastal and offshore conditions, thereby extending the service life of the equipment and reducing future maintenance needs. This subcontract is issued under NAICS code 238290, indicating its focus on specialized construction services for industrial maintenance and coating applications. The work is to be performed at the Norfolk location under the oversight of the Mid Atlantic Reg Maintenance Center, a Department of Defense facility responsible for sustaining critical operational assets. The contract's timing, posted on June 30, 2026, suggests a lead time for planning and mobilization, likely aligning with scheduled maintenance windows or fleet overhaul cycles. The scope emphasizes technical precision, regulatory compliance, and durability under extreme environmental stress, targeting mission readiness for maritime assets critical to defense operations.
Other Building Equipment Contractors

POSTED

about 1 month ago

DEADLINE

N/A
View Details
NAICS: 811310
Federal
Cargo Crane Mechanical Repair and ReassemblyThe contract requires comprehensive mechanical repair and reassembly of a 20-ton cargo crane, encompassing full disassembly, identification and replacement of worn or damaged components, precise reassembly, alignment, thorough lubrication, and rigorous functional testing to ensure the crane is restored to full operational capability. All work must be performed to precise mechanical standards to guarantee safety, reliability, and longevity of the equipment after repair. The work is to be conducted at the Norfolk location under a subcontract awarded by the Mid Atlantic Reg Maintenance Ctr, a division of the Department of Defense. The project falls under NAICS code 811310, indicating it involves industrial mechanical repair services. Though specific timelines and financial terms are not detailed here, the scope is clearly defined to focus exclusively on mechanical restoration activities, excluding structural, electrical, or software-related modifications unless otherwise required to support the mechanical integrity of the crane system.
Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

about 1 month ago

DEADLINE

N/A
View Details