This Solicitation opportunity from Missouri was posted on October 24, 2025. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Networking Gear Equipment Supply - Humphreys Renovation (Federal

Closed

26-042State & Local

Submission Closed11/07/2025, 12:00:00 AM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

Solicitation # N0010426QDB83

Solicitation NO0014-26-Q-DB83 is a request for firm fixed price quotes from the NAVSUP Weapon Systems Support Mechanicsburg for the teardown, evaluation, repair, and modification of a Frequency Synthesizer, NSN 5895-01-603-3396. The scope requires the repaired item to meet all operational and functional requirements associated with the specified Cage Codes and reference numbers, utilizing the contractor's standard repair practices and original manufacturer specifications. The contract includes an option for the government to increase the quantity by up to 50 percent within 180 days after award. Delivery is required within 180 days on a FOB Destination basis. Award will be made to a single, technically acceptable offeror based on the most advantageous combination of price and past performance, with past performance weighted as more important than price. The government will utilize the Supplier Performance Risk System to assess item, price, and supplier risk. Strict quality assurance and packaging standards apply, including physical identification per MIL-STD-130 and preservation according to MIL-STD-2073. Contractors are responsible for all inspections at the origin and must maintain inspection records for 365 days following final delivery. Invoicing must be processed electronically through the Wide Area Workflow system.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Solicitation # N0010426QDB84

Solicitation N0010426QDB84, issued by NAVSUP Weapon Systems Support Mechanicsburg under Emergency Acquisition Authority, seeks firm fixed price quotes for the teardown, evaluation, repair, and modification of an electronic synthesizer (NSN 5895-01-662-7975). The requirement includes a base quantity and an option for up to 50 percent additional quantity, with a delivery timeline of 180 days FOB Destination to the DLA Distribution New Cumberland facility. Award will be made to a single responsible offeror based on a determination of the most advantageous terms, with past performance weighted as more important than price. The contractor must adhere to strict quality and safety standards, including ISO 9001 quality system requirements and ANSI/ESD S20.20 for electrostatic discharge control. Because the equipment is intended for use on submarines and surface ships, it must be entirely mercury-free. Packaging and marking must comply with MIL-STD-2073-1 and MIL-STD-129, including specific requirements for Depot Level Repairable labels and Unique Item Identification. All payment requests and receiving reports must be processed electronically via Wide Area Workflow.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

PANEL, ALARM, SHIPBOARD

Solicitation # SPE4A6-27-T-6896

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Solicitation # SPE4A7-27-T-2113

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Solicitation # SPE4A7-27-T-2092

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Solicitation # SPE4A7-27-T-2108

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

GPS Touch Screen Hardware SupplierThis subcontract agreement establishes a partnership for the supply of ruggedized touch screen GPS units and corresponding mounting hardware for fleet projects at Boone County Golf Courses. The required hardware must be capable of operating in temperatures exceeding 100 degrees Fahrenheit and must feature automotive-grade wiring harnesses. To ensure vehicle safety and efficiency, units must be wired directly to cart power sources with integrated ignition-sync and battery protection capabilities. The supplier is responsible for delivering the complete set of GPS hardware units and installation kits for the entire fleet, with all provided hardware being fully warranted. This procurement falls under NAICS code 334290 and is managed through the Kentucky Golf Course agency. Interested parties must adhere to the response deadline of November 9, 2026.

POSTED

DEADLINE

Replacement Parts Supply for NSN 6320-00-149-7570This subcontract involves the supply of internal components, sub-assemblies, and raw materials for the INDICATOR-TRANSMITT, identified by NSN 6320-00-149-7570. The selected provider will support prime contractors on U.S. Navy repair projects by manufacturing parts that strictly adhere to TDP Version 014 specifications. All deliverables must be U.S.-made or qualify as end products from a qualifying country in accordance with the Buy American-Balance of Payments Program. Managed by the Navsup Weapon Systems Support Mech under the Department of Defense, the contract falls under NAICS code 334290. The scope of work requires the delivery of individual components or sub-assemblies directly to the designated repair facility. The solicitation was posted on October 26, 2026, with a response deadline of November 9, 2026.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Procurement of Fixed Gas Monitors, Sensors, Controllers, and required components for a complete chemical alarm system with technical commissioning and startup, and staff training services.

Solicitation # W912DR-27-Q1CPX

W2SD Endist Baltimore

POSTED

DEADLINE

Solicitation # SPRPA126QUC01

Solicitation SPRPA126QUC01 is issued by the Department of Defense, specifically the DLA Aviation office in Philadelphia, for the procurement of two aircraft antennas under NSN 7RH 5895-01-696-8909 P8. This is a single-award, fixed-price solicitation where the government will evaluate offers based on a trade-off between past performance and price, with past performance deemed more important than price. The award will be made to the responsible, technically acceptable offeror determined to be most advantageous. Strict quality and sourcing requirements are in place, mandating that all parts be newly manufactured spares; refurbished or repaired materials are ineligible. Suppliers must provide FAA-certified parts accompanied by an FAA Authorized Release Certificate and FAA Form 8130-3 Airworthy Approval Tag. Furthermore, offers must originate from government-approved sources, and distributors must provide an authorized distributor letter on the source's letterhead. The contract incorporates critical safety item identification via DFARS 252.209-7010 and requires compliance with AS/EN/JISQ 9100 or equivalent quality standards. Inspection and acceptance will occur at the origin. Packaging must adhere to MIL-STD-2073 and MIL-STD-129 standards, with specific requirements for DLR labels and shipping containers. Payment and invoicing must be processed electronically through the Wide Area WorkFlow (WAWF) system using the Invoice 2in1 method. The solicitation also includes various regulatory clauses, including the Buy American Act, cybersecurity requirements for safeguarding covered defense information, and prohibitions regarding Chinese military companies.

Pa DLA Aviation At Philadelphia

POSTED

DEADLINE

Imaging and Electronic Warfare Systems Special Support Equipment (SSE) Unit Fabrication and Maintenance

Solicitation # N6660427R0001

Nuwc Division Newport

POSTED

DEADLINE

Light Interference Filter (LIF)-support the Enhanced Night Vision Goggles (ENVG PSQ-20B)

Solicitation # SPRBL1-26-R-A003

Solicitation SPRBL1-26-R-A003 is a request for a one-time Firm-Fixed Price definite quantity purchase order for 513 AN/PVS-20 Light Interference Filters (NSN 5855-01-611-2113, Part Number OFM-2021-A1). These filters are critical components for the AN/PSQ-20B Enhanced Night Vision Goggles used by the U.S. Military to amplify ambient light for combat and non-combat field use. The contract is issued by DLA Land at Aberdeen, with performance taking place at Aberdeen Proving Ground, Maryland, and hardware delivery to the DLA Distribution New Cumberland facility in Pennsylvania. The government requires that all delivered units be form, fit, and function interchangeable with previously fielded filters without any degradation in performance. Award will be based on the Lowest Price Technically Acceptable (LPTA) process, evaluating technical adequacy, past performance, and the proposed delivery schedule. A key requirement is the completion of First Article Testing (FAT) by the contractor unless waived by CECOM, with testing details governed by MIL-PRF-49257. The contractor must maintain a quality management system compliant with ASQ/ANSI/ISO 9001:2015. Packaging and marking must adhere to MIL-STD-2073-1E, MIL-STD-129R, and ISPM 15 standards for wood packaging. While the overall contract is unclassified, the contractor must safeguard Controlled Unclassified Information (CUI) in accordance with NIST SP 800-171 and DFARS 252.204-7012. Proposals must be submitted via the PIEE Solicitation Module or email, with a requested delivery timeline of 180 days after receipt of order.

DLA Land At Aberdeen

POSTED

1 day ago

DEADLINE

in about 1 month

AI Contract Overview

This contract pertains to the supply of networking equipment for the Humphreys Building renovation at the University of Central Missouri, funded through federal sources, with a solicitation number of 26-042 posted on October 24, 2025. Bids must be submitted exclusively via the UCM eBid system (Ionwave), and communication outside of the procurement portal may disqualify responses. The procurement process emphasizes strict adherence to federal and university specifications, including delivery FOB destination by December 15, 2025, and requires vendors to be authorized CISCO resellers. The contract size is estimated between $500,000 and $1,000,000, with evaluation criteria based on price, product compliance, delivery timeline, references, and federal compliance. The process includes detailed bid specifications, protest procedures, and compliance affidavits such as Affirmative Action and Work Authorization, ensuring adherence to legal and federal requirements. Supporting documents outline the bidding process, terms and conditions, and protest procedures, emphasizing open competition and clear communication channels. The project involves detailed specifications for network equipment, with mandatory delivery timelines and federal grant compliance. Additional related procurement activities include requests for proposals and bids for various services and construction projects, such as recycling processing services, road reconstruction, and equipment procurement, all governed by strict submission guidelines, evaluation criteria, and legal compliance protocols. The comprehensive documentation ensures transparency, fairness, and adherence to federal, state, and university procurement standards throughout the contracting process.

General Info

Agency

University of Central Missouri

NAICS

334290 - Other Communications Equipment Manufacturing

Place of Performance

MO, USA

Set-Aside

NONE

Documents

26-042 Addendum 1 - Networking Gear Equipment Supply - Humphreys Renovation

amendment

High

IFB Terms and Conditions - University of Central Missouri

8 pages · terms-and-conditions

High

University of Central Missouri Federal Contract Provisions

contract-document

High

Affidavit for Affirmative Action

1 page · other

Low

Affidavit of Work Authorization for University of Central Missouri

1 page · affidavit

Low

Humphreys Building Renovation Network Equipment Supply General Specifications

2 pages · other

Low

University of Central Missouri Bid/Proposal Protest Procedures

2 pages · other

Low

AI Contract Breakdown

Uniform Contract Format

Timeline

1 update

PhaseClosed

PostedSep 24

Solicitation

Notice updatedOct 24

Response deadline changed from Oct 16, 2025 to Nov 7, 2025. The notice title changed. NAICS code changed from 236220 to 334290. The notice description changed. The point of contact changed.

Response DeadlineNov 7

Deadline has passed

Submission Closed

11/07/2025, 12:00:00 AM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyUniversity of Central Missouri

Contacts1 person available

OfficeN/A

Organization / AgencyUniversity of Central Missouri

Office AddressN/A

Contacts

Robert Walla

contact@example.gov

+1 (555) 000-0000

Full Description

** BIDS ACCEPTED VIA UCM Ebid SYSTEM ONLY **
Communication made with parties outside of Procurement may result in your solicitation response being disqualified.
UCM bids are secured by Ionwave until the closing date and time. Bid pricing is available for viewing when the bid is unsealed. To access bid pricing after the bid is unsealed, go to the UCM eBid system (Ionwave), click Closed Bids, the bid number, Bid Tabulation by Supplier. Note: Pending any award, the bid is reviewed and evaluated for responsiveness and responsibility. No award will be made until the evaluation and review is complete by UCM.