This Government Contract opportunity from Georgia was posted on June 30, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

New Motor Grader Supply and Factory Installation of Sloper

Closed

State & Local

Submission Closed07/14/2026, 03:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 336120

New

SLED

Heavy-Duty Tractor Truck SupplierThis subcontract agreement with the Burke County Board of Commissioners in Georgia involves the supply and delivery of one heavy-duty tractor truck intended for use by prime contractors on road department projects. The vehicle must be fully operational and include an operator's manual. Technical specifications require a Cummins X12 engine with 450 hp, an 80,000 lbs gross combined weight, a 12,000-lb front axle, and a 40,000-lb four-spring rear suspension. Additional required features include a self-adjusting clutch, a 13-gallon DEF tank, and 12-foot gladhand lines. The solicitation was posted on October 14, 2026, with a response deadline of December 2, 2026. The contract falls under NAICS code 336120 for heavy-duty truck manufacturing. Interested parties can find further details through the Georgia Department of Administrative Services portal.

Burke County Board of Commissioners

POSTED

DEADLINE

Solicitation # PE-61700-NONST-2027-000000079

The Burke County Board of Commissioners in Georgia is soliciting sealed bids for the purchase and delivery of one tractor truck for use by the Burke County Road Department. This solicitation, identified as PE-61700-NONST-2027-000000079, requires the vehicle to meet specific minimum technical requirements, including a Cummins X12 engine rated at 450 horsepower, an 80,000 lbs gross combination weight, a 12,000-lb front axle, and a 40,000-lb four-spring rear suspension. The truck must be white or gray and equipped with T1R22.5 tires, a left-side fifth-wheel release, air conditioning, heat, USB ports, an AM/FM radio, and 12-foot gladhand lines with a wet line for trailer hookup. Safety features must include front-mounted strobe and safety lighting as well as safety gauges. Bidders are required to submit their sealed proposals by December 2, 2026, at 12:00 p.m., clearly marked as Tractor Truck. Proposals must explicitly state the offered warranty and the anticipated delivery date. The final deliverable is the tractor truck and its corresponding operator's manual, which must be delivered directly to the Burke County Road Department. Evaluation is based on the bidder's ability to meet these minimum vehicle specifications and provide the required delivery and warranty information.

Burke County Board of Commissioners

POSTED

DEADLINE

Heavy-Duty Chassis SupplierThis subcontract, managed by DAS Procurement for the state of Connecticut, seeks a supplier to provide a new heavy-duty truck chassis to support prime contractors working on Regional Refuse Disposal District 1 waste operations projects. The required vehicle must feature a six-cylinder diesel engine with at least 525 HP, an engine brake, a 1,500-watt engine block heater, a 20,000-lb capacity front axle, and a factory-installed steerable 20,000-lb lift axle. Additional specifications include a 75-gallon left-mounted fuel tank and an air-suspension driver's seat. The procurement process is categorized under NAICS code 336120, with the solicitation posted on October 13, 2026. Interested parties must submit their responses by the deadline of October 23, 2026. The selected supplier will be responsible for the delivery of the completed truck chassis as specified.

POSTED

DEADLINE

Invitation to submit Bid for a new Roll-off Truck

Solicitation # 39390

Regional Refuse Disposal District #1, serving the towns of Barkhamsted, New Hartford, and Winchester, is soliciting bids for the purchase and delivery of one new roll-off truck. The vehicle will be used to transport municipal solid waste, bulky waste, and recyclables within a 50-mile radius of Barkhamsted, Connecticut. A 2026 model-year truck is preferred, and the vehicle must be capable of hauling containers up to 50 cubic yards with an overall length not exceeding 37.5 feet from the front bumper to the end of the hoist. Technical requirements include a mandatory 24-foot hoist and a minimum 75-gallon left-mounted fuel tank. Proposals will be evaluated based on responsiveness to specifications, equipment suitability, delivery schedule, warranty coverage, service support, and overall value. Bidders must provide a firm total price with an itemized breakdown including the chassis, hoist, tarp system, box grabbers, delivery, and setup. Optional financing and extended warranty proposals may also be submitted. Proposals must be received by October 23, 2026, at 2:00 p.m. and delivered to the District office in Barkhamsted, Connecticut. The primary point of contact for this solicitation is Administrator Todd Arcelaschi.

POSTED

DEADLINE

SEF2492 Prisoner Transport Bus

Solicitation # 225510

The State of Alaska Department of Transportation and Public Facilities, HQ State Equipment Fleet, is soliciting bids for the one-time purchase of one Prisoner Transport Bus under solicitation number 225510. The vehicle must be winterized for temperatures as low as minus 50 degrees Fahrenheit, feature a dark blue baked-on polyurethane paint finish, and comply with Federal Motor Vehicle Safety Standards and SAE test procedure J2233 for heating. Key specifications include a driver compartment, guard stations with 180-degree rotating seats, a surveillance station with two 7-inch color monitors and night-vision cameras, and storage capacity for approximately 40 inmate boxes. Required safety equipment includes a 5 B:C minimum fire extinguisher, emergency reflective triangles, and a standard school bus first aid kit. Bids must be submitted in PDF format or via sealed envelope by November 4, 2026, at 2:30 PM, with requests for amendments due by October 28, 2026. Offerors must provide unit pricing and extensions, and they must hold a current Alaska business license. Preference may be awarded to qualified employment programs or individuals with disabilities. The contract requires the contractor to be solely responsible for all equipment, training, and warranty services, and mandates that all price decreases, such as fleet rebates, be passed to the state. Delivery is required within a maximum of 240 days after receipt of order to a final destination within Alaska, with pricing based on dockside Seattle/Tacoma. Payment for agreements under $500,000 will be made within 30 days of receipt of proper billing or delivery.

Transportation and Public Facilities

POSTED

DEADLINE

58k Tandem Axle Extended Cab Chassis SupplyThis subcontract involves the supply of a new 58k GVWR tandem axle extended cab chassis designed for prime contractors providing utility vehicles to the Nashville Electric Service. The chassis must be specifically configured for crew transport and heavy-load stability, ensuring full frame compatibility with NES SPEC #27-FLT148. The scope of work includes the delivery of the completed chassis directly to the designated agency or upfitter. The project is based in Nashville, Tennessee, and falls under NAICS code 336120. Interested parties must adhere to the timeline established by the posting date of October 13, 2026, with a final response deadline of November 4, 2026.

Nashville Electric Service

POSTED

DEADLINE

56k Tandem Axle Extended Cab Chassis SupplyThis subcontract involves the manufacture and supply of a new 56k GVWR tandem axle chassis featuring an extended cab for prime contractors working on Nashville Electric Service utility vehicle projects. The chassis must be specifically configured to support a heavy material handler aerial device in strict accordance with NES SPEC #27-FLT147. The scope of work includes the production and delivery of the completed chassis to either the designated upfitter or the agency in Nashville. Interested parties should note the response deadline of November 4, 2026, for this procurement effort categorized under NAICS code 336120.

Nashville Electric Service

POSTED

DEADLINE

Heavy-Duty Chassis SupplyThis subcontract involves the supply of a new, unused 58k GVWR tandem axle extended cab chassis intended for prime contractors working on Nashville Electric Service vehicle procurement projects. The chassis must be specifically configured to support a heavy utility body and digger derrick in strict accordance with NES SPEC #27-FLT141, while ensuring all frame and axle configurations adhere to DOT safety standards. The scope of work includes the delivery of the completed chassis to the designated agency or upfitter in Nashville. Interested parties should note that the response deadline for this procurement is November 4, 2026, with the project falling under NAICS code 336120.

Nashville Electric Service

POSTED

DEADLINE

Provide New 58k Tandem Axle Extended Cab Chassis

Solicitation # Z5368

Nashville Electric Service is soliciting bids for the procurement of one new 58k tandem axle extended cab chassis equipped with a rear center mounted 50 foot digger derrick. All equipment must strictly adhere to NES SPEC #27-FLT141, which must be completed and returned with the bid to avoid potential rejection. Bidders are required to submit their proposals exclusively through the Vendor Web Portal, ensuring that quoted prices remain valid for acceptance through November 30, 2026. The award decision will be based on technical compliance, price, and delivery timelines, with bidders required to state their earliest delivery in calendar days. All inquiries regarding this solicitation must be emailed to Alan Martinez by October 27, 2026, at 2:00 pm CST. The final deadline for bid responses is November 4, 2026, at 8:00 pm.

Nashville Electric Service

POSTED

DEADLINE

Provide New 58k Tandem Axle Extended Cab W/ Auger Drill

Solicitation # Z5370

Nashville Electric Service is soliciting bids under solicitation number Z5370 for the procurement of one new 58k tandem axle extended cab chassis equipped with an auger drill. The vehicle must be provided in strict accordance with NES SPEC #27-FLT148, which is a mandatory document that must be completed and returned with the bid to avoid potential rejection. This solicitation is managed by procurement contact Alan Martinez, with all inquiries required to be submitted via email by October 27, 2026, at 2:00 pm CST. Bids must be submitted exclusively through the Vendor Web Portal by the response deadline of November 4, 2026, and quoted prices must remain valid for acceptance through November 30, 2026. Evaluation for the award will be based on technical compliance with the specified standards and the earliest delivery time provided in calendar days. The place of performance for this contract is Nashville, Tennessee.

Nashville Electric Service

POSTED

DEADLINE

Provide New 56k Tandem Axle Chassis

Solicitation # Z5369

Nashville Electric Service is soliciting bids for the procurement of one new 56k tandem axle chassis featuring an extended cab and a 60 foot material handler overcenter aerial device. All equipment must be provided in strict accordance with NES Specification 27-FLT147. Bidders are required to complete and return this specification document with their submission, as failure to do so may result in the rejection of the bid. The solicitation, identified as Z5369, requires bids to be submitted exclusively through the Vendor Web Portal by November 4, 2026, at 2:00 p.m. local time. Quoted prices must remain valid for acceptance through November 30, 2026. Bidders must state their earliest delivery timeline in calendar days, which will be used as a factor in the award decision. All inquiries must be directed to Alan Martinez via email no later than October 27, 2026, at 2:00 p.m. CST.

Nashville Electric Service

POSTED

DEADLINE

IFB: 2026-016 Street Sweeper Truck

Solicitation # 2026-016

Springville City is soliciting sealed bids for the purchase of one new street sweeper truck for the Public Works Department's Sewer/Stormwater Division. The city is seeking a chassis-mounted dual engine, regenerative air sweeper that is of current manufacture and belongs to a model and series that has been in production for at least five years. The primary evaluation factor for selecting a vendor will be the lowest cost, provided the offeror can ensure quality service and meet the technical specifications for reliability and performance. Interested parties must submit their bids via the U3P EUNA portal or in a sealed envelope delivered to the Springville Finance Department. All submissions must be received and logged by 2:00 PM local time on Wednesday, October 28, 2026, as late bids will not be accepted.

Utah

POSTED

2 days ago

DEADLINE

in 14 days

AI Contract Overview

Seminole County Board of Commissioners is seeking a subcontractor to supply a new motor grader equipped with a factory-installed sloper, or ditching blade, that meets specified technical requirements including at least 175 net horsepower, a gross vehicle weight of 38,000 pounds, and a 150-amp alternator. The equipment must be delivered with all components properly installed and operational at the time of delivery. The contract includes a comprehensive five-year or 7,500-hour warranty, whichever occurs first, covering all parts and labor without travel charges for service. Additionally, the warranty guarantees lifetime cleaning of the diesel particulate filter, ensuring long-term operational efficiency and compliance with emissions standards. The solicitation was posted on June 30, 2026, with responses due by July 14, 2026, under NAICS code 336120 for motor vehicle body manufacturing. Performance is expected within Georgia, and the procurement is classified as a subcontract under the county’s procurement system.

General Info

Supply motor grader with sloper, 175 HP, 38K lbs, 150-amp alternator, five-year or 7,500-hour warranty, lifetime DPF cleaning.

Agency

Georgia → Seminole County Board of Commissioners

NAICS

336120 - Heavy Duty Truck Manufacturing

Place of Performance

GA, USA

Set-Aside

NONE

Documents

This scope was carved out of PE-72500-NONST-2026-000000010.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Motor Grader RFP

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedJun 30

subcontract

Response DeadlineJul 14

Deadline has passed

Submission Closed

07/14/2026, 03:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyGeorgia → Seminole County Board of Commissioners

ContactsNo contacts available

OfficeN/A

Organization / AgencyGeorgia → Seminole County Board of Commissioners

Office AddressN/A

ContactsNo contact information available

Full Description

Supply of a new motor grader with factory-installed sloper (ditching blade), meeting technical specs including 175+ net horsepower, 38,000 lbs. GVW, and 150-amp alternator, including 5-year/7,500-hour warranty with no travel charges and lifetime DPF cleaning.

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS