Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Nickel Alloy and Monel Raw Material Supply

Active

Federal

Response Deadline11/05/2026, 12:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract through the Department of Defense DDSP New Cumberland Facility involves the supply of certified raw nickel alloy and Monel materials for prime contractors fulfilling DLA supply contracts. The scope of work includes sourcing and smelting high-grade nickel alloy for valve bodies and processing Monel for valve trim, with deliverables consisting of certified raw metal stock billets, bars, or castings. To ensure strict adherence to military specifications, the provider must supply Material Test Reports for all materials. Additionally, the contract mandates full compliance with domestic sourcing requirements as outlined by the Buy American Act and the Berry Amendment.

General Info

Supply certified nickel alloy and Monel materials for DoD following domestic sourcing requirements.

Agency

Department Of Defense → DDSP NEW CUMBERLAND FACILITY

NAICS

331491 - Nonferrous Metal (except Copper and Aluminum) Rolling, Drawing, and Extruding

Place of Performance

OH, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE7MC-27-T-1219.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

VALVE, CHECK

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 25

subcontract

Response DeadlineNov 5

Submission deadline

Response Deadline

11/05/2026, 12:00:00 PM UTCin 10 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DDSP NEW CUMBERLAND FACILITY

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DDSP NEW CUMBERLAND FACILITY

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies certified raw nickel alloy and Monel materials for prime contractors delivering DLA supply contracts. Sources and smelts high-grade nickel alloy for valve bodies and processes Monel for valve trim. Provides Material Test Reports (MTRs) to ensure compliance with military specifications. Must meet Buy American Act and Berry Amendment domestic sourcing requirements. Delivers certified raw metal stock billets, bars, or castings.

Similar Contracts

Same NAICS industry code

DUCT ASSEMBLY, AIR C

Solicitation # SPE4A7-27-T-1960

Solicitation SPE4A7-27-T-1960 is a fixed-price, total small business set-aside request for quotations issued by the Defense Logistics Agency Weapons Support ASC for seven units of Duct Assembly, Air C (NSN 1660-01-162-6536). The procurement requires delivery to the DLA Distribution New Cumberland Facility with a need ship date of March 2, 2026, and an original required delivery date of July 7, 2027. A critical requirement includes the delivery of one First Article Testing unit to Hill AFB within 90 days of contract award. The manufacturer must maintain an inspection system compliant with ISO 9001:2015 or an equivalent standard, and inspection and acceptance will occur at the point of origin. The contract mandates strict adherence to DLA packaging requirements (RP001), ASTM D3951, and MIL-STD-129 for marking and labeling. Technical data associated with this item is subject to ITAR or EAR export controls, requiring contractors to have approved US/Canada Joint Certification Program certification. Quality assurance will be managed via zero-based sampling plans such as MIL-STD-1916 or ASQ H1331. Additionally, the awardee must comply with CMMC Level 2 certification, the Buy American Act, and the Berry Amendment. Invoicing and receiving reports must be processed electronically through the Wide Area WorkFlow system.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

High-Temperature Superalloy SupplyThis subcontract, titled High-Temperature Superalloy Supply, is issued by the Department of Defense under the DLA Weapons Support ASC Supplier Oper OEM Division. The primary objective is the sourcing and certification of aerospace-grade superalloy billets, castings, or powder, with a specific focus on nickel-based or cobalt-based alloys designed to withstand extreme turbine temperatures. These materials are intended for prime contractors fulfilling DLA Weapons Support supply contracts. The supplier is responsible for delivering certified raw material shipments accompanied by Material Test Reports and Certificates of Conformance in accordance with AMS standards. The opportunity is categorized under NAICS code 331491, with a response deadline set for November 2, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Solicitation # SPE7M2-27-T-0064

Solicitation SPE7M2-27-T-0064, issued by the DLA Weapons Support Nuclear Reactor Program, is a HUBZone small business set-aside for the procurement of 400 sheets of Alloy 5052 Temper H32 metal sheet, measuring 48 inches in width and 8 feet in length. This critical application item must comply with several technical standards, including SAE AMS-QQ-A-250/8C, ASTM B660, and ASTM B666. Eligibility for award is strictly limited to suppliers listed on the Qualified Suppliers List for Distributors (QSLD) for FSGs 95 and 96. The procurement requires the submission of Metal Certification Contract Data Requirements Lists (CDRLs) and prohibits the intentional use of mercury or Class I ozone-depleting chemicals. Delivery is established as FOB Origin with a need ship date of December 19, 2026, and an original required delivery date of June 5, 2027, shipping to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. Packaging and marking must adhere to MIL-STD-2073-1E, MIL-STD-129, and specific Level A requirements of ASTM B660. Inspection and acceptance will occur at the destination. Contractors are required to use the Wide Area Workflow (WAWF) system for electronic invoicing and payment requests. The solicitation incorporates various FAR and DFARS clauses, including the Buy American and Balance of Payments Program and strict safeguarding of covered defense information.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

DEADLINE

Supply of ATI High-Performance Alloy SheetsThis subcontract through the NASA Shared Services Center involves the supply of high-performance ATI alloy sheets for prime contractors working on NASA Glenn Research Center projects. The scope of work requires the provision of ATI 273, 617, 249, and 10282 alloys, with specified thicknesses between 0.080 and 0.125 inches and dimensions ranging from 12x6 inches to 120x48 inches. The contractor must deliver 30 square feet of certified material, ensuring that all supplied alloys originate from the same heat or lot. Essential deliverables include verification reports and certification of Aerospace Material Specifications regarding both chemistry and mechanical properties. This procurement falls under NAICS code 331491.

NASA Shared Services Center

POSTED

DEADLINE

in about 23 hours

ATI alloy sheet

Solicitation # 80NSSC27946614Q

NASA Shared Services Center is seeking to procure ATI alloy sheet material for the NASA Glenn Research Center in Cleveland, Ohio. The requirement specifically covers ATI 273, ATI 617, ATI 249, and ATI 10282 alloys. The government intends to award a sole source contract to ATI Flat Rolled Products Holdings, LLC under the authority of FAR 12.102(a), as they have been determined to be the sole provider of this material. This procurement is classified under NAICS code 331491 and will follow the provisions and procedures prescribed in FAR Part 12 for commercial items. The contractor must ensure that all materials come from the same heat or lot and provide certification and verification of AMS specifications regarding chemistry and mechanical properties where applicable. While the government is currently only requesting capability statements to determine if the procurement can be conducted on a competitive basis, any future quotes must include the cost per piece or unit. Interested organizations must submit their qualifications in writing to Procurement Specialist Laura Quave by 4:00 p.m. CST on October 27, 2026. This acquisition is also subject to the NASA FAR Supplement Clause 1852.215-84 regarding the Ombudsman.

NASA Shared Services Center

POSTED

DEADLINE

in about 23 hours

Radio Frequency (RF) Cable Supplier (NSN 6145-01-232-7484)This subcontract involves the manufacture and supply of Radio Frequency (RF) cable, specifically NSN 6145-01-232-7484, to support prime contractors for the DLA Weapons Support Maritime Supply Chain. The project requires a total delivery of 52,500 feet of cable, shipped FOB Origin to Hill AFB. All materials must be produced in accordance with MIL-DTL-17/176E(1) and MIL-DTL-17J(5) SUP 1 standards, with spools measured at 500 feet each and a minimum length of 75 feet. Strict adherence to packaging and quality guidelines is mandatory, including compliance with MIL-DTL-12000 and MIL-STD-2073-1E. Additionally, the supplier must maintain a QPL/QML listing and ensure full compliance with the Buy American Act. The solicitation is categorized under NAICS code 331491 and is managed by the Department of Defense.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

CABLE, RADIO FREQUENCY

Solicitation # SPE7M1-27-T-1262

Solicitation SPE7M1-27-T-1262 is a procurement request from the Defense Logistics Agency for 30,000 feet of radio frequency cable, identified as NSN 6145-00-660-8054. This is designated as a critical application item and must adhere to technical specifications MIL-DTL-17/75F(3) and MIL-DTL-17J(5) SUP 1. The material must be provided in continuous lengths, with 500 feet per spool. The delivery is set for 80 days after award, with a need ship date of April 22, 2026, and a final required delivery date of April 24, 2027. Shipping is FOB Origin under the First Destination Transportation program, with both inspection and acceptance occurring at the destination. The contractor must comply with strict quality and packaging standards, including MIL-STD-2073-1E, MIL-STD-129 for marking, and MIL-DTL-12000 for preservation. Palletization must follow DLA requirement RP001. Additionally, the offeror must ensure that no mercury is intentionally added to the hardware and that all components meet QPL/QML requirements. This is not a small business set-aside, and offerors must comply with the Buy American Act, the Berry Amendment, and DFARS cybersecurity reporting requirements. Invoicing and receiving reports are to be processed electronically through the Wide Area WorkFlow system.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

CABLE, RADIO FREQUENCY

Solicitation # SPE7M1-27-T-1268

Solicitation SPE7M1-27-T-1268 is issued by the DLA Weapons Support Maritime Supply Chain for the procurement of radio frequency cable, identified as NSN 6145-01-232-7484. This item is designated as a critical application item and must comply with basic specification MIL-DTL-17/176E(1) and reference specification MIL-DTL-17J(5) SUP 1. The requirement is for a total of 52,500 feet across four line items, with specific spooling requirements of 500 feet per spool and a minimum length of 75 feet. The item is listed on the Qualified Products List or Qualified Manufacturers List, making those standards applicable. Delivery is set as FOB Origin with inspection and acceptance occurring at the destination. Shipments are directed to multiple DLA distribution depots, including Hill AFB, Tinker AFB, Robins AFB, and Warner Robins. Packaging and preservation must adhere to MIL-DTL-12000 and MIL-STD-2073-1E, with marking following MIL-STD-129 and palletization following RP001. The contract is not a small business set-aside and falls under NAICS code 331491. Key regulatory requirements include the prohibition of intentionally added mercury, compliance with the Buy American Act, and the use of the Wide Area WorkFlow system for electronic invoicing.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Non-Ferrous Metal Supplier (Bronze & Aluminum)This subcontract involves the supply and delivery of bronze and aluminum solids and bushings to support prime contractors on US Army Corps of Engineers facility projects. The scope of work requires the procurement of materials that strictly adhere to ASTM C95500 Bronze, ASTM C95400 Aluminum Bronze, and ASTM 6061-T6 Aluminum specifications. All provided materials must be delivered to Marietta, Ohio, and must be accompanied by traceable mill certifications and comprehensive testing reports. Managed under the Department of Defense via the W072 Endist Huntington, the contract mandates strict compliance with Buy American regulations as outlined in DFARS 252.225-7001. The opportunity falls under NAICS code 331491, with the primary place of performance located in Middleport. Interested parties must adhere to the established timeline, with a response deadline set for October 28, 2026.

W072 Endist Huntington

POSTED

DEADLINE

CABLE, POWER, ELECTRICAL

Solicitation # SPE7M2-27-T-0286

This solicitation, identified as SPE7M2-27-T-0286, is a request for quotations for the procurement of 11,016 feet of electrical power cable, specifically NSN 6145-01-205-3637. The items are to be delivered in nominal lengths of 1,000 feet per reel and must adhere to technical specifications MIL-DTL-24643/43G and MIL-DTL-24643D. The contract is issued by the DLA Weapons Support Nuclear Reactor Program with a required delivery date of January 2, 2028, and a need ship date of December 31, 2027. Delivery is FOB Origin, with inspection and acceptance occurring at the destination, specifically the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The procurement is subject to strict quality and material standards, including the prohibition of intentionally added mercury and compliance with the Buy American Act and the Berry Amendment. Packaging and preservation must follow MIL-DTL-12000 and MIL-STD-2073-1E, with marking conducted per MIL-STD-129. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and mandatory registration via the DLA Account Management and Provisioning System to access the Vendor Shipment Module. This is a full and open competition and is not a small business set-aside.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

DEADLINE

Solicitation # SPE7M4-27-T-1482

Solicitation SPE7M4-27-T-1482 is a request for quotations issued by the Defense Logistics Agency Weapons Support Fluid Handling Division for the procurement of 80 feet of metallic steel tubing with a 2.000 inch outer diameter and 0.156 inch wall thickness. The requirement allows for a quantity variance of plus 10 percent and minus 0 percent. Delivery is required within 20 days after receipt of the order, with the shipping point designated as FOB Origin. The final destination for the materials is in Kayseri, Turkey, coordinated through A.J Worldwide Services in Secaucus, New Jersey. The contractor is required to provide a Certificate of Quality Compliance for all delivered supplies, with separate certificates for each manufacturing lot, and must upload these documents into the iRAPT system. Packaging must adhere to MIL-STD-2073-1E and marking must comply with MIL-STD-129. Inspection and acceptance will occur at the source, governed by FAR 52.246-2. This procurement is not a small business set-aside, though a price evaluation preference is available for certified HUBZone small businesses. The contract incorporates various federal regulations, including the Buy American Act, the Berry Amendment, and specific cybersecurity requirements under DFARS 252.204-7012. All quotes must be submitted via the DLA Internet Bid Board System.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

TUBE — 4710015996992 — N0010427QBB05

Solicitation # N0010427QBB05

Solicitation NO0014-27-Q-BB05 is a request for quotations from the Navsup Weapon Systems Support Mech for the procurement of a tube, identified by NIIN 015996992 under CLIN 0001. The award will be based on the lowest priced technically acceptable offer, with a 10 percent price evaluation preference applied to qualifying HUBZone small business concerns. The contractor must adhere to Technical Data Package version 003 and comply with higher-level quality standard MIL-I-45208. Key deliverables include the hardware and a complete package of Vendor Certified Reports of Test and Inspection per DI-QCIC-8872, which must be submitted to Navsup-WSS Code N9433 for review. The contract mandates strict adherence to an order of precedence for document conflict resolution, prioritizing amendments and the schedule of supplies over technical data and drawings. Packaging must comply with MIL-STD-129 and MIL-STD-2073-1, with specific requirements for cleanliness control and the use of approved pallets per MIL-STD-147. Inspection and acceptance are both conducted at the origin, specifically at the contractor's plant. Administrative requirements include electronic invoicing via Wide Area Workflow and compliance with various FAR and DFARS clauses regarding cybersecurity, the Buy American Act, and the prohibition of mercury. All technical documents are subject to export controls and are not releasable to foreign nationals.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

More opportunities from Department Of Defense → DDSP NEW CUMBERLAND FACILITY

Same awarding agency

Power Supply Unit Supplier (NSN 6130-01-739-6722)This subcontract involves the supply of six power supply units, specifically OEM Part Number 1/2C24N125K5002 manufactured by Advanced Energy Industries Inc under NSN 6130-01-739-6722. These units are intended for prime contractors delivering to the DLA Weapons Support Land Supplier Operations, with performance taking place in New Cumberland. The delivery terms are FOB Origin. The supplier must adhere to strict military standards for packaging, marking, and palletization, specifically MIL-STD-2073-1E, MIL-STD-129, and RP001. Additionally, the contract mandates full compliance with the Buy American Act, the Berry Amendment, and DFARS 252.204-7012. The opportunity was posted on October 25, 2026, with a response deadline of November 5, 2026.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

DEADLINE

Manufacturing and Supply of Rifle Cam PinsThis subcontract involves the manufacturing and supply of 18 precision-machined Rifle Cam Pins for the Department of Defense, specifically the DDSP New Cumberland Facility. The contractor is responsible for fabricating components according to NSN 1005-016894305 specifications, ensuring all items are marked per MIL-STD-129 and packaged according to RP001 standards. Due to the nature of the components, the project requires the use of precision machining equipment to maintain tight tolerances. A critical requirement of the contract is full supply chain traceability in accordance with DLAD Procurement Note C03, which must be provided alongside the delivered units. The performance of this contract will take place in New Cumberland, Pennsylvania.

Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

DEADLINE

Supply of Valve Piston Rings (NSN 4820014948070)This subcontract involves the procurement of five precision-manufactured valve piston rings under NSN 4820014948070 for the Department of Defense, specifically supporting the DDSP New Cumberland Facility. The selected provider is responsible for manufacturing or sourcing the components to exact specifications while ensuring strict adherence to RP001 DLA Packaging Requirements and supporting Destination Inspection as mandated by FAR 52.246-2. The project falls under NAICS code 332911 and will be performed in New Cumberland. Interested parties must submit their responses by November 5, 2026, to support prime contractors fulfilling Defense Logistics Agency supply contracts.

Industrial Valve Manufacturing

POSTED

DEADLINE

Solid Rubber Sheet SupplierThis subcontract involves the supply of solid rubber sheets for prime contractors supporting Department of Defense DLA supply contracts through the DDSP New Cumberland Facility. The supplier is responsible for manufacturing or sourcing rubber sheets that meet NSN 9320004431199 specifications, requiring smooth finishes on both sides and dimensions of 0.625 inches thick, 36 inches wide, and 36 inches long. The scope of work includes the delivery of 17 solid rubber sheets along with First Article Testing samples. Compliance requires performing First Article Testing in accordance with MIL-PRF-6855, paragraph 4.3.1, and applying all necessary bare item markings. The project is categorized under NAICS code 326199 and is to be performed in New Cumberland.

All Other Plastics Product Manufacturing

POSTED

DEADLINE

Supply of Pressure Relief Valves (NSN 4820123613817)This subcontract involves the procurement of six pressure relief valves for prime contractors supporting Department of Defense supply contracts through the DDSP New Cumberland Facility. The required hardware must be Mankenberg GmbH part number 6024050UA, adhering strictly to NSN 4820123613817 specifications. Compliance with RP001 DLA Packaging Requirements and RQ011 Government Identification removal standards is mandatory for all delivered units. Eligible providers must maintain a valid SAM.gov registration, a Unique Entity Identifier, and a CAGE code. The performance of this contract will take place in New Cumberland, Pennsylvania, under NAICS code 423830. Responses to this solicitation are due by November 5, 2026.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

DEADLINE

Supply of Valve Actuator Handwheel CouplingsThis subcontract involves the procurement and delivery of two valve actuator handwheel couplings, specifically NSN 4820016716937 and Triumph Controls part number 90108-00, to support prime contractors on DLA supply contracts. The selected provider is responsible for ensuring all items are packaged and marked in strict accordance with MIL-STD-2073-1E and MIL-STD-129, while adhering to DLA RP001 procurement parcel requirements. The contract is managed under NAICS code 423830 for the Department of Defense. Delivery of the units is required FOB Origin to the DLA Distribution DDSP New Cumberland Facility located in New Cumberland, Pennsylvania. The response deadline for this opportunity is November 5, 2026.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

DEADLINE

Supply of Safety Relief Valves (NSN 4820-01-531-2974)This subcontract involves the procurement and delivery of safety relief valves, specifically identified by NSN 4820-01-531-2974, to support prime contractors fulfilling Department of Defense supply contracts for the DDSP New Cumberland Facility. The selected provider must ensure all valves comply with the DLA Master Solicitation and all applicable technical and quality requirements. Physical delivery of the valves to the designated destination point in New Cumberland is required under FOB Origin shipping terms. To be eligible for this contract, providers must possess a valid Unique Entity Identifier and CAGE code. The opportunity was posted on October 25, 2026, with a response deadline of November 5, 2026. The work falls under NAICS code 423830, focusing on the specialized supply of these safety components to meet federal defense standards.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

DEADLINE

Specialized Tooling for Valve ManufactureThis subcontract, issued by the Department of Defense for the DDSP New Cumberland Facility, involves the design and manufacture of specialized tooling, jigs, and dies to support prime contractors on DLA supply contracts. The scope of work includes the fabrication of molds, dies, and machining fixtures utilizing tool steel, EDM, and high-precision milling. The contractor is responsible for the precision grinding and hardening of tool surfaces, ensuring all components are verified against NSN technical drawings and accompanied by detailed dimensional inspection reports. The primary deliverable for this engagement is a completed tooling set specifically for NSN 4820-01-467-6807. The project falls under NAICS code 333515 and will be performed in New Cumberland. Interested parties must adhere to the response deadline of November 5, 2026.

Cutting Tool and Machine Tool Accessory Manufacturing

POSTED

DEADLINE

Valve Body Casting and ForgingThis subcontract opportunity with the Department of Defense, specifically the DDSP New Cumberland Facility, involves the production of raw cast or forged valve body blanks for prime contractors on DLA supply contracts. The selected provider will be responsible for casting or forging metal components to rough dimensions using industrial furnaces or presses, ensuring all work adheres to the specific alloys and technical specifications defined by the NSN technical data package. Additionally, the contractor must apply necessary heat treatment or material stabilization and provide comprehensive mill test reports to verify alloy composition. The project is categorized under NAICS code 331511 and will be performed in New Cumberland, Pennsylvania. Interested parties must submit their responses by November 5, 2026, following the posting date of October 25, 2026. The primary deliverable for this engagement is the supply of completed cast or forged blanks that meet all rigorous military technical standards.

POSTED

DEADLINE

Fluid Pressure Regulating Valve FabricationThis subcontract involves the fabrication of fluid pressure regulating valves for prime contractors supporting DLA supply contracts. The scope of work includes the precision CNC machining of valve bodies and internal regulating components specifically for NSN 4820-01-467-6807, utilizing custom tooling to ensure all parts meet strict fluid pressure regulation tolerances. The final deliverable consists of two completed valves that have undergone rigorous quality assurance and pressure testing. The project is managed under the Department of Defense through the DDSP New Cumberland Facility and requires strict adherence to DLA Technical and Quality Requirements as well as DFARS 252.204-7016. Performance will take place in New Cumberland, Pennsylvania. The solicitation was posted on October 25, 2026, with a response deadline of November 5, 2026, falling under NAICS code 332912.

Fluid Power Valve and Hose Fitting Manufacturing

POSTED

DEADLINE

Supply of Check Valves (NSN 4820-01-535-4467)This subcontract involves the supply of 180 check valves meeting NSN 4820-01-535-4467 specifications for prime contractors working on Department of Defense projects through the Defense Logistics Agency. The contractor is responsible for manufacturing or sourcing these valves, with the option to utilize additive manufacturing provided they receive ESA approval. All items must be packaged and labeled in strict accordance with the Hazard Communication Standard 29 CFR 1910.1200. The project is associated with the DDSP New Cumberland Facility and requires strict adherence to DFARS 252.204-7012 cybersecurity compliance standards. Performance will take place in New Cumberland, Pennsylvania. Interested parties must note the response deadline of November 5, 2026, for this procurement effort under NAICS code 332911.

Industrial Valve Manufacturing

POSTED

DEADLINE

Supply of Emergency Valves (NSN 4820010650845)This subcontract involves the manufacture or sourcing of 25 emergency valves identified by NSN 4820010650845 for the Department of Defense, specifically supporting the DLA Weapons Support Maritime Hardware/Electrical. The selected provider must ensure all parts meet strict technical specifications and handle shipment preparations under the First Destination Transportation program. Compliance with FAR 52.211-1 Material Requirements and active SAM registration are mandatory prerequisites for performance. The opportunity is designated as a HUBZone set-aside under NAICS code 332911, with performance taking place in New Cumberland. Interested parties must submit their responses by November 5, 2026, to support the requirements of the DDSP New Cumberland Facility.

Industrial Valve Manufacturing

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS