Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 2 at 2:00 PM EDT

Register Free →

47--NIPPLE,TUBE

Active
SPE7M1-26-U-5556Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

Solicitation SPE7M1-26-U-5556 is a request for quotations issued by DLA Land and Maritime for the procurement of tube nipples, identified by NSN 4730015659760. This procurement may result in a unilateral indefinite delivery contract with a term of one year or until the aggregate total of orders reaches a maximum value of 350,000.00 dollars. The requirement includes a guaranteed minimum quantity of 4 units, with an estimated two orders per year. Line 0001 specifies an initial quantity of 31 units to be delivered within 87 days after receipt of order. Items are to be shipped to various CONUS and OCONUS DLA depots, with the FOB point designated as destination other. The solicitation is open to all responsible sources under NAICS code 332919, and quotes must be submitted electronically by September 10, 2026. The award may be automated, though quotes for used, reconditioned, or additive manufactured items are ineligible. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, with palletization following RP001 standards. Invoicing and receiving reports must be processed through Wide Area WorkFlow. The contract incorporates various FAR and DFARS clauses, including requirements for the Buy American Act, the Berry Amendment, and NIST SP 800-171 cybersecurity standards. Inspection and acceptance will occur at the destination per FAR 52.246-2.

General Info

DoD procurement of 31 tube nipples from King Nutronics Corporation within 87 days.

Agency

Department Of Defense → MARITIME SUPPLY CHAINView Agency

NAICS

332919 - Other Metal Valve and Pipe Fitting ManufacturingView NAICS

Place of Performance

OH

Set-Aside

NONE

Documents

(1)

SPE7M1-26-U-5556 Request for Quotations

PDF20 pagesrfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseCombined Synopsis
Posted

Solicitation

Type Changed

Solicitation → Combined Synopsis

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MARITIME SUPPLY CHAIN
Contacts1 person available
OfficeCOLUMBUS, OH, 43218-3990, USA
Organization / Agency
Department Of Defense → MARITIME SUPPLY CHAIN
View Agency Profile
Office AddressCOLUMBUS, OH, 43218-3990, USA

Full Description

Show more
Proposed procurement for NSN 4730015659760 NIPPLE,TUBE: Line 0001 Qty 31 UI EA Deliver To: By: 0087 DAYS ADO This Solicitation may result in an Automated IDC (Indefinite Delivery Contract). The term of the contract/order will be one year or until the aggregate total of orders placed against the contract/order reach 350000.00. The estimated number of orders per year is 2. The Guaranteed Minimum quantity will be 4. Items will be shipped to various CONUS and OCONUS (via consolidation and containerization point) DLA Depots. Approved source is 13859 3731-41-5. The solicitation is an RFQ and will be available at the link provided in this notice. Hard copies of this solicitation are not available. Specifications, plans, or drawings are not available. All responsible sources may submit a quote which, if timely received, shall be considered. Quotes must be submitted electronically.

Similar Contracts

Same NAICS industry code

NAICS: 332919
New
DIBBS
ELBOW, HOSE
Solicitation # SPE7M4-26-U-0422
This solicitation, issued by the DLA Land and Maritime Fluid Handling Division under number SPE7M4-26-U-0422, is a Request for Quotations for an indefinite-quantity, fixed-price contract to procure Hose Elbows (NSN 4730-01-576-5131). The procurement is designated as a Total Small Business Set-Aside with a maximum contract value of $350,000. While the estimated annual quantity is 34 units, the contract includes a guaranteed minimum of 5 units and a minimum delivery order quantity of 17 units. Deliveries are required within 87 days of order, under FOB Origin terms, with inspection and acceptance occurring at the destination. The contract incorporates rigorous technical, quality, and environmental standards. Specifically, Class I ozone-depleting chemicals are strictly prohibited, and all items must comply with the DLA Master List of Technical and Quality Requirements. Packaging must adhere to ASTM D3951 and RP001 for palletization, while marking and labeling must follow MIL-STD-129. Offerors must also comply with domestic material restrictions, including the Buy American Act and the Berry Amendment, and must safeguard covered defense information per DFARS requirements. Payment and receiving reports are to be processed electronically through the Wide Area Workflow (WAWF) system. Quotations must be submitted by August 26, 2026, and must not include used, reconditioned, or remanufactured items.
FLUID HANDLING DIVISION

POSTED

about 9 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332919
New
DIBBS
48--VALVE,SAFETY RELIEF,RE
Solicitation # SPE7MC-26-T-231R
Solicitation SPE7MC-26-T-231R is a fixed-price request for quotations issued by DLA Distribution San Joaquin for the procurement of 23 remote control safety relief valves, identified by NSN 4820015938334. This is a total small business set-aside under NAICS code 332919, with a response deadline of September 8, 2026. The approved source is 86184 20464001D. All quotes must be submitted electronically via the DLA Internet Bid Board System (DIBBS). The government may utilize an automated award process and will apply the HUBZone price evaluation preference for eligible concerns. The required delivery date is April 19, 2027, with shipping terms set as FOB Origin. Delivery is to be made to DLA Distribution San Joaquin in Tracy, California, where both inspection and acceptance will occur. Packaging must comply with ASTM D3951 and RP001, while marking and labeling must adhere to MIL-STD-129. Hazardous materials must be labeled according to the Hazard Communication Standard (29 CFR 1910.1200 et seq). Invoicing and payment will be processed electronically through the Wide Area WorkFlow (WAWF) system. Special requirements include compliance with the Buy American Act, the Berry Amendment, and DFARS 252.204-7012 for safeguarding covered defense information. Offers involving additive manufacturing are prohibited unless specifically authorized. Offerors are encouraged to provide quantity ranges in their quotes to facilitate potential requirement adjustments.
DLA DIST SAN JOAQUIN

POSTED

about 14 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332919
New
Federal
STEM, VALVE
Solicitation # N0010426QNC95
This contract pertains to the supply of a stem for a 2-inch ball valve designated as SPECIAL EMPHASIS material (Level I/SUBSAFE), critical to shipboard systems where failure could lead to catastrophic outcomes including loss of life or vessel. The item must strictly conform to NAVSEA drawing 801-6408529 and referenced specifications including QQ-N-286 for material composition, MIL-STD-792 for marking, MIL-STD-1622 for cleaning, and T9074-AS-GIB-010/271 for ultrasonic inspection. Weld repair is prohibited on QQ-N-286 material, and all components must maintain traceability from raw material through final assembly via unique heat-lot markings applied per MIL-STD-792, with exceptions for small surfaces requiring durable tags. Chemical and mechanical testing must be performed on the stem and any starting material over 4 inches in dimension, with results certified by approved labs including Huntington Alloys, Metallurgical Consultants, and Naval Surface Warfare Center Carderock. Electronic signatures are accepted for certifications, provided they are uniquely controlled and auditable, and all certifications must include positive, unqualified statements of compliance without disclaimers. The contractor must maintain an ISO-9001 or MIL-I-45208 quality system with calibration aligned to ISO-10012 or ANSI-Z540.3, subject to government inspection at source. All sub-tier suppliers must be vetted for capability and performance, with quality requirements flowed down and monitored through audits. Receiving inspection requires 100% verification of traceability, certification completeness, and dimensional compliance per ANSI/ASQ Z1.4, with zero defects allowed in final lot acceptance. Certifications for each shipment must be electronically submitted via WAWF to Portsmouth Naval Shipyard, with strict "Ship to," "Inspect by," and "Accept by" codes, and no material may be shipped until written acceptance is received. Configuration control is paramount; any deviations or engineering changes must be formally proposed and approved by the Contracting Officer, with class I changes requiring a formal ECP that includes lifecycle cost impacts and logistic effects. The contract mandates mercury-free materials, prohibits marking of material with designators except fasteners, and requires full adherence to Buy American and Small Business Program requirements. All documentation must be submitted through ECDS, and government representatives have full rights to audit, inspect, and reject non
Navsup Weapon Systems Support Mech

POSTED

about 14 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 332919
New
Federal
VALVE,BALL
Solicitation # N0010426QND46
This contract pertains to the procurement of a Compartment Salvage Ball Valve and associated components for use in a critical shipboard system, where failure could result in catastrophic consequences including loss of life, ship damage, or system failure. The material is designated as SPECIAL EMPHASIS Level I, requiring strict quality controls, full traceability, and comprehensive certification. The contractor must supply components per Drawing 4558706 and related specifications, including specific parts such as the Deck Fitting Nipple and Cap Assembly identified by NSNs 1H 4730-01-671-3260L1 and 1H 4730-01-210-6118L1. Material requirements are rigorous, mandating exact metallurgical compositions including QQ-N-281, ASTM-B150, SAE AMS 6931, and MIL-T-16420, with precise mechanical and chemical testing protocols. Traceability is mandatory from raw material through final assembly, with unique heat/lot markings on all components and certification documentation directly linked to each part. All metallic materials require quantitative chemical and mechanical analysis, and non-metallic components like seats must meet exact hardness, tensile, and water absorption thresholds with manufacturer-specific approval. Welding, brazing, and fastener fabrication are tightly regulated, requiring approved procedures, qualified personnel, and submission of qualification data prior to production. Fasteners must comply with MIL-DTL-1222 and NASM standards, with prohibited use of molybdenum disulfide lubricants and mandatory use of A-A-59004 anti-galling compound. No internal threads may be cold-formed; all must be cut. All certifications must be positive, unqualified, and legible, with no disclaimers permitted. Non-conforming materials will be rejected, and all inspections must follow zero-defect acceptance criteria for lot samples. The contractor must maintain an ISO-9001 compliant quality system with calibration adherence to ISO-10012 or ANSI-Z540.3, and government inspection is authorized at source. Subcontractors are bound by the same requirements and require explicit oversight. Packaging, preservation, and marking follow MIL-STD-2073, and all items must bear the designated CID T884305725. The contract invokes emergency acquisition flexibilities and is certified under the Defense Priorities and Allocations
Navsup Weapon Systems Support Mech

POSTED

about 14 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 332919
New
Federal
PARTS KIT,STOP-CHEC
Solicitation # N0010426QNE16
This solicitation from NAVSUP Weapon Systems Support Mechanicsburg seeks a parts kit for a 1 1/2 inch stop check in accordance with Navsea drawing 803-2177934. The material is designated as Special Emphasis material due to its use in crucial shipboard systems where failure could result in serious injury, loss of life, or loss of the vessel. Key components such as the bonnet ring, stem, disc holder, and bonnet require specific quantitative chemical and mechanical analysis and must adhere to strict material standards including QQ-N-281, ASTM-B164, and MIL-C-24679. The contract mandates rigorous testing, including non-destructive tests for welds and specific pressure tests with defined tolerances, as well as strict compliance with welding and brazing procedures. The contract includes comprehensive quality assurance and configuration control requirements. Contractors must maintain a total equipment baseline configuration and submit Engineering Change Proposals for any modifications affecting form, fit, or function. Strict traceability is required for all raw materials and sub-tier supplier components, and a Certificate of Compliance must be provided with each shipment. All certification data must be submitted to the Portsmouth Naval Shipyard via Wide Area Workflow for review and acceptance prior to shipment. Additionally, the award is subject to Defense Priorities and Allocations System (DPAS) rating for national defense and must comply with various federal regulations regarding small business subcontracting, Buy American requirements, and equal opportunity.
Navsup Weapon Systems Support Mech

POSTED

about 14 hours ago

DEADLINE

in 25 days
View Details
NAICS: 332919
New
Federal
VALVE, GLOBE W/ ACT
Solicitation # N0010426QEB89
The contract pertains to the procurement of a globe valve with actuator under solicitation N0010426QEB89, issued by the Naval Supply Systems Command Weapon Systems Support Mechanical Division, with a response deadline of August 27, 2026. All technical and quality requirements are governed by the Individual Repair Part Ordering Data (IRPOD), which takes precedence over other documents in case of conflict, followed by the contract schedule, terms and conditions, and referenced specifications such as MIL-STDs and commercial item descriptions. Compliance with specified document revisions is mandatory, and contractors must obtain written approval before using alternate revisions or deviations, including justification that proposed changes do not impact form, fit, function, or quality of the part. Mercury or mercury-containing compounds are strictly prohibited from contact with the supplied hardware. Quality assurance protocols are defined in the IRPOD, requiring contractors to maintain a government-acceptable inspection system and retain complete records throughout performance and beyond. Packaging must adhere to MIL-PRF-23199, specifically using heat-sealed envelopes for items subject to cleanliness controls as defined in referenced standards like MIL-STD-767 or MIL-STD-2041; use of green poly bags is permitted only under strict conditions, and fire-retardant packaging is no longer required. Pre-manufacturing submittals, including procedures, drawings, and other documentation listed in the IRPOD, must be submitted within 45 days after contract award for approval. A Certificate of Compliance per DI-MISC-81356 must accompany each delivery, aligned with the contract number, NSN, and item nomenclature. All contractual documents are deemed issued upon electronic transmission or mailing. Pricing is valid for 60 days after the closing date unless otherwise specified, and mandatory use of Workflow Pro (WFP) and compliance with Buy American, cybersecurity maturity, veteran and disability equal opportunity, and security prohibition requirements are enforced. Information security controls governed by DoDI 5230.24 apply to all materials provided, with distribution statements clearly designated. Access to required technical documents is restricted to the BPMI e-Commerce portal, requiring pre-registration and password access, and nuclear-related publications not available online must be requested directly through the contracting office with proper need-to-know certification. The contract requires adherence to detailed DD Form 1423 data submission protocols, including timelines, delivery frequencies, approval codes, and pricing groups for technical data packages.
Navsup Weapon Systems Support Mech

POSTED

about 14 hours ago

DEADLINE

in 29 days
View Details

More opportunities from Department Of Defense → MARITIME SUPPLY CHAIN

Same awarding agency

NAICS: 335311
New
DIBBS
WIRING HARNESS
Solicitation # SPE7M1-26-U-5118
This solicitation, issued by DLA Land and Maritime on August 12, 2026, is a Request for Quotations for a one-year Indefinite Delivery Contract (IDC) for the procurement of wiring harnesses, identified by NSN 6150-01-563-0997 and associated with Oshkosh Defense LLC part number 3483630. The contract is designated as a small business set-aside with a maximum value of $350,000 and includes a guaranteed minimum quantity of 19 units. The estimated annual quantity is 129 units, with a minimum delivery order quantity of 32 units. Deliveries are required within 158 days after delivery order award, with terms set at FOB Origin and all performance occurring within the continental United States. Technical and quality requirements are strictly governed by the DLA Master List, and the contract incorporates specific sampling methods such as MIL-STD-1916 or ASQ H1331 to ensure compliance. Packaging must adhere to MIL-STD-2073-1E and RP001 standards, while marking must comply with MIL-STD-129. The contract includes critical regulatory provisions, including the Buy American Act, the Berry Amendment, and DFARS 252.204-7012 for safeguarding covered defense information. Offerors must use the Wide Area WorkFlow (WAWF) system for electronic invoicing and receiving reports. Notably, the government will not accept items produced via additive manufacturing, nor will it accept used, reconditioned, or remanufactured goods. Quotations must be submitted by the August 26, 2026, deadline and must maintain a validity period of at least 90 days.
Power, Distribution, and Specialty Transformer Manufacturing

POSTED

about 9 hours ago

DEADLINE

in 4 days
View Details