Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

This Sources Sought opportunity from Department Of Energy was posted on June 5, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Nitronic 50 stainless steel forgings

Closed
BZ-2026-02Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 332111
New
DIBBS
BAR, METAL
Solicitation # SPE8E4-27-T-0076
Solicitation SPE8E4-27-T-0076 is a request for quotations issued by the Defense Logistics Agency Troop Support Construction and Equipment Metals office for the procurement of 48 metal bars, identified by NSN 9510015276320. These components, also described as long retaining rods without retaining rings, are intended for use in a Tactical Water Purification System. The procurement falls under NAICS code 332111 and requires the submission of quotes via the DIBBS system. Delivery is specified as FOB Origin with a required delivery date of March 22, 2027, and a need ship date of October 14, 2026, with a delivery window of 66 days after order. Inspection and acceptance will occur at the destination, specifically the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The contract mandates strict adherence to technical and quality requirements, including Metal Certification Contract Data Requirements Lists and DD Form 1423s. Packaging must comply with ASTM D3951 and MIL-STD-129, though the DLA Master List of Technical and Quality Requirements takes precedence. Palletization must follow RP001 standards. Key regulatory requirements include compliance with the Buy American Act, the Berry Amendment, and DFARS 252.204-7012 for safeguarding covered defense information. Payment and receiving reports must be processed electronically through the Wide Area WorkFlow system. Offerors must be registered in the System for Award Management and are prohibited from using additive manufacturing processes unless specifically authorized.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 24 hours ago

DEADLINE

in 2 days
NAICS: 332111
New
DIBBS
GUIDE, CAM FOLLOWER, FO
Solicitation # SPE7L1-27-T-1579
This procurement, solicitation number SPE7L1-27-T-1579, is a total small business set-aside issued by the DLA Weapons Support Land Supply Chain for the acquisition of 149 units of Guide, Cam Follower, Folding Floor (NSN 5340-01-540-4920). The requirement is governed by NAICS code 332111 and specifies a need ship date of February 5, 2026, with an original required delivery date of April 7, 2027. Delivery is FOB Origin, with inspection and acceptance occurring at the destination, specifically DLA Distribution San Joaquin in Tracy, California. The contract mandates strict adherence to technical and quality standards, including TDP Rev D Gen 4 and specific Quality Assurance Provisions (QAP 13873 and QAP 16236). Quality compliance requires a Certificate of Quality Compliance and Metal Certification. Sampling must follow MIL-STD-1916 or ASQ H1331, with specific AQLs assigned to critical, major, and minor attributes. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements (RP001). Key regulatory requirements include the Buy American and Balance of Payments Program (DFARS 252.225-7001) and the Berry Amendment. Offerors must be registered in the System for Award Management (SAM) and utilize the Wide Area Workflow (WAWF) for electronic invoicing. All quotations must be submitted via the DLA Internet Bid Board System (DIBBS) by October 26, 2026. Additionally, the contract incorporates cybersecurity requirements under DFARS 252.204-7012 and prohibits the use of additive manufacturing unless specifically authorized.
DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 24 hours ago

DEADLINE

in 2 days
NAICS: 332111
New
DIBBS
BAR, METAL
Solicitation # SPE8E9-27-T-0228
Solicitation SPE8E9-27-T-0228 is a request for quotations issued by DLA Troop Support for the procurement of 232 feet of flat chrome-molybdenum (4130) steel bars. The material must be 0.250 inches thick and 2.00 inches wide, supplied in whole foot lengths between 10 and 12 feet. This is designated as a critical application item and must comply with technical standards SAE AMS-S-6758B Revision B and SAE AMS2806 Revision D. Delivery is required by May 23, 2027, with a need ship date of April 12, 2027, shipped FOB Origin to the DLA Distribution Depot Oklahoma at Tinker AFB. Eligibility for award is restricted to suppliers listed on the Qualified Suppliers List for Distributors (QSLD) or Manufacturers (QSLM). A Certificate of Quality Compliance (Mill-Material Certification) is mandatory for every shipment. Strict adherence to marking and packaging requirements is required, including compliance with MIL-STD-129 and ASTM A700; failure to provide legible, waterproof continuous identification markings—including the contract delivery order number, NSN, and heat/lot number—will result in the rejection of the product. Inspection and acceptance will occur at the destination, though source inspection is waived for approved QSL suppliers. The procurement incorporates various FAR and DFARS clauses, including the Buy American Act and Berry Amendment restrictions. Offers must be submitted via the DIBBS system. Payment will be processed electronically through the Wide Area WorkFlow (WAWF) system. A price evaluation preference is available for HUBZone Small Business Concerns, and the use of additive manufacturing for the produced items is prohibited unless specifically authorized.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 24 hours ago

DEADLINE

in 2 days

AI Contract Overview

Show more

Lawrence Berkeley National Laboratory is conducting market research through a Request for Information to identify capable sources for the procurement of Nitronic 50 Stainless Steel forgings to support the High Field Test Facility Dipole project. The project requires two large forgings, each measuring a minimum of 845 x 525 x 263 mm, to be used as endplates for a 15T superconducting magnet. The material must comply with the UNS S20910 / ASTM XM-19 specification and meet minimum property requirements as defined by ASTM A182. Respondents are expected to demonstrate technical capability, including inspection and testing procedures, and provide details on the documentation package they would supply, such as material certifications, non-destructive test reports, and dimensional inspection records. The response must address whether the forgings would be manufactured in the United States and qualify as domestic products under the Buy American Act, with mandatory disclosure of the manufacturing facility’s location and compliance with the 65% domestic content threshold. Any foreign-sourced products must meet specific cost thresholds compared to domestic alternatives to be considered for exceptions. The solicitation number is BZ-2026-02, under NAICS code 332111 for Iron and Steel Forging, and is classified as a sources-sought notice with no set aside applied. Responses are due by 3:00 PM Pacific Time on June 17, 2026, and must be submitted exclusively via email to Brian Zatkow at [email hidden] using the prescribed LBNL RFI response template. All information provided must be non-proprietary, as submissions are subject to public disclosure without notification or redaction rights. Pricing, budgetary estimates, and formal proposals are explicitly prohibited and will be discarded without review. The desired lead time from order receipt is 10 weeks or less, with staggered delivery of the two forgings being an acceptable alternative. The forgings must be delivered to Berkeley, California, under the governance of the University of California’s prime contract with the Department of Energy. This RFI is strictly for planning purposes and does not constitute a solicitation, nor will it result in an immediate contract award.

General Info

Lawrence Berkeley Lab seeks suppliers for two large Nitronic 50 Stainless Steel forgings.

NAICS

332111 - Iron and Steel Forging

Place of Performance

Berkeley, CA, 94720, USA

Set-Aside

NONE

Documents

4

RFI BZ-2026-25 Response Document

DOCX, High priority: read this firstrfi
High

RFI BZ-2026-02 Nitronic 50 Stainless Steel Forgings

PDF, Low priorityrfi
Low

DF-1000-5103.pdf

PDF

DF-1000-8853.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseClosed
Posted

Sources Sought

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Energy → Berkeley National Labor - DOE Contractor
Contacts1 person available
OfficeBerkeley, CA, 94720, USA
Office AddressBerkeley, CA, 94720, USA

Full Description

Show more

Lawrence Berkeley National Laboratory is conducting market research to identify potential sources that possess the capabilities necessary to deliver Nitronic 50 Stainless Steel forgings in support of the High Field Test Facility Dipole project (TFD). 


A key component of the TFD project are the two endplates, which are used to apply end loading on a 15T superconducting magnet. Each of these endplates must be fabricated from a single large Nitronic 50 Stainless Steel forging. LBNL is seeking a source for these forgings.


Please see the RFI document attached for details and specifications. LBNL drawing numbers DF-1000-8853 and DF-1000-5103 are included for reference to demonstrate the TFD endplates that will be fabricated from these forgings.

More opportunities from Department Of Energy → Berkeley National Labor - DOE Contractor

Same awarding agency

NAICS: 334220
New
Federal
UPDATED ALS SHB pulsed RF HPA
Solicitation # AM202603-25
Solicitation AM202603-25, issued by the University of California Managing and Operating Lawrence Berkeley National Laboratory, seeks proposals for the design, manufacture, and delivery of two 25 kW pulsed Radio Frequency High Power Amplifier (HPA) units for the Advanced Light Source RF Amplifier Replacement Project. The procurement requires one unit operating at approximately 125 MHz and a second at 500 MHz, utilizing modern solid-state LDMOS or GaN FET technology to replace existing tube-based systems. The estimated performance term is 12 months, covering the full product life cycle from preliminary design and NRTL safety certification to installation and site acceptance testing. Proposals are due by November 18, 2026, and will be evaluated based on best overall value, considering technical approach, delivery schedule, quality assurance, past performance, and total price. Awardees must adhere to stringent LBNL safety and build standards, including electrical safety programs, seismic design criteria, and specific packaging and marking requirements. Submissions must include a technical volume, a business volume with a detailed price proposal, and completed representation and certification forms. LBNL has indicated a preference for off-the-shelf systems that meet requirements and will accept closed-loop liquid-cooled solid-state power amplifier bids.
Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

1 day ago

DEADLINE

in 21 days
View Details
NAICS: 332999
Federal
Fabricated Components for the SR Embedded Floor Plates for the ALS-U Project
Solicitation # AA-2027-02
The University of California, on behalf of the Lawrence Berkeley National Laboratory, is soliciting proposals under RFP AA-2027-02 for the fabrication and delivery of 96 embedded floor plates for the Advanced Light Source Upgrade (ALS-U) project. This acquisition is a total small business set-aside under NAICS code 332999. The scope of work involves producing various plate types to serve as structural interfaces and leveling surfaces, with delivery dates scheduled between January and July 2027. The project requires strict adherence to technical specifications, including the use of CMM or equivalent calibrated devices for measurement and compliance with specific part marking and packaging standards to ensure traceability and prevent damage. Proposals are due by November 11, 2026, and must be submitted in three separate volumes: a cover letter, a technical volume, and a business volume. The technical volume must include a supplier quality evaluation survey and past performance references from the last five years. The business volume requires a completed price proposal schedule, representations and certifications, and acceptance of the sample subcontract terms. Award will be granted to the responsive, responsible offeror that is determined to be technically acceptable and offers the lowest evaluated price. Key regulatory requirements include the Buy American Act and prohibitions on certain telecommunications equipment.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

7 days ago

DEADLINE

in 14 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS