Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

NOAA NOS NGS Terrestrial Lidar Scanners

Active
1305M226Q0195Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Department of Commerce, through NOAA’s National Ocean Service and National Geodetic Survey, is soliciting two long-range terrestrial lidar systems capable of acquiring survey-grade three-dimensional data at distances of up to two kilometers from limited or remote terrestrial locations. These systems must deliver high accuracy and sufficient point density to support nationwide emergency response, damage assessment, and precise geodetic applications required for the congressionally mandated national shoreline survey. The procurement includes not only the hardware but also associated software, comprehensive maintenance plans, ongoing training, and licensing agreements to ensure sustained operational capability and user proficiency across NOAA teams. Responses are due by August 10, 2026, with the solicitation posted on July 30, 2026 under number 1305M226Q0195. The NAICS code for this requirement is 333310, indicating it is classified under manufacturing of surveying and mapping instruments. The solicitation is unrestricted with no set-aside provisions, and performance will be centered in Silver Spring, Maryland, though equipment may be deployed nationwide. Primary point of contact is Kirstin Bryant, with secondary contact Nicole Lawson, both reachable via NOAA email. All inquiries and submissions must be made through the official SAM.gov portal linked in the posting.

General Info

Procure two long-range terrestrial lidar systems for nationwide shoreline survey with software, training, and maintenance.

Agency

Department Of Commerce NoaaView Agency

NAICS

333310 - Commercial and Service Industry Machinery ManufacturingView NAICS

Place of Performance

Silver Spring, MD, 20910, USA

Set-Aside

NONE

Documents

(4)

Past Performance Questionnaire

PDFpast-performance

NOAA NGS Terrestrial LiDAR Scanners Statement of Need

PDFstatement-of-need

Solicitation 1305M226Q0195 for Long Range Terrestrial Lidar Systems

PDFrfq

03+SOL+Att+C+Pricing+Schedule.xlsx

XLSX

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseCombined Synopsis
Posted

Combined Synopsis

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Commerce Noaa
Contacts2 people available
OfficeNORFOLK, VA, 23510, USA
Organization / Agency
Department Of Commerce Noaa
View Agency Profile
Office AddressNORFOLK, VA, 23510, USA
Contacts
Kirstin Bryant
Nicole Lawson

Full Description

Show more

The Department of Commerce (DOC), National Oceanic and Atmospheric Administration (NOAA),National Ocean Service (NOS) has a requirement for long range terrestrial lidar systems, associated software, maintenance, training and licensing plans. NOAA is congressionally mandated to survey the national shoreline. The National Geodetic Survey (NGS) requires two terrestrial laser scanning systems capable of collecting survey-grade 3D data at long range (= 2 km) from limited and potentially remote terrestrial vantage points, while maintaining high accuracy and sufficient point density to support emergency response, damage assessment, and geodetic applications nationwide.


Please see the attached RFQ and associated supporting documents. 


Similar Contracts

Same NAICS industry code

NAICS: 333310
New
DIBBS
KETTLE, STEAM JACKET
Solicitation # SPE3SE-26-T-1081
The contract is for a steam jacket kettle under NSN 7310-01-588-4047, with a quantity of one unit and a delivery requirement of 20 days ADO. The solicitation, numbered SPE3SE-26-T-1081, was posted on July 30, 2026, and responses are due by August 3, 2026. It is designated as a Women-Owned Small Business Set-Aside, with the NAICS code 333310, and is managed by the Department of Defense’s Subsistence FSE Supply Chain. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced in the document, with applicable revisions determined based on acquisition size and solicitation amendments. The item must comply with DLA packaging standards, and any supplies failing acceptance must have government identification removed. Mercury and mercury-containing compounds are prohibited unless used in specific functional applications such as batteries, fluorescent lamps, sensors, or chemical reagents approved by NAVSEA, and portable items containing mercury must include shockproof construction and a secondary containment boundary per NAVSEA 5100-003D. The product is not permitted to contain Class I ozone-depleting substances. No approved technical data package is available from DLA Troop Support, and requests for such data should not be submitted. The place of performance is listed as FPO with a zip code of 96678, and the primary point of contact is Khuong Nguyen, reachable via email and phone provided.
SUBSISTENCE FSE SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 3 days
View Details
NAICS: 333310
New
DIBBS
PAD, TRACTION
Solicitation # SPE7L3-26-T-142L
This contract, identified by solicitation number SPE7L3-26-T-142L, is issued by the Defense Logistics Agency for the procurement of 115 units of a specific part with NSN 2590-01-645-6666 and purchase request number 7017697185. The item, designated as PAD, TRACTION, must be delivered FOB origin within 116 days of contract award, with no tolerance for quantity variance—exactly 115 units are required. All packaging and labeling must comply with MIL-STD-129 and ASTM D3951, with the DLA Master List of Technical and Quality Requirements taking precedence over any conflicting standards. Palletization must adhere strictly to RP001: DLA Packaging Requirements for Procurement, and government identification must be removed from non-accepted supplies. Delivery is to be made to DLA Distribution Red River, Receiving Building 499, located at 10th Street and K Avenue, Texarkana, TX 75507-5000, with transportation governed by DLAD Proc Notes C19 and C20. The unit price is set at $115.00 per unit, resulting in a total contract value of $13,225. The required delivery date is December 5, 2026, and this aligns with the need ship date. The solicitation was posted on July 30, 2026, with responses due by August 10, 2026. This procurement falls under NAICS code 333310 and is managed by the Department of Defense, specifically the Land Supplier Operations Vehicle Support organization. Primary point of contact is Viviane Kounkorgo, reachable via email and telephone provided. The contract stipulates that technical and quality requirements referenced by R or I numbers are incorporated by reference from the official DLA Master List, and for this simplified acquisition, the revision in effect on the solicitation issue date governs compliance. All documentation, packaging, marking, and shipping must follow DLA directives without exception.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 333310
New
DIBBS
BORESCOPE KIT
Solicitation # SPE7L7-26-T-4525
The contract pertains to the procurement of a Borecope Kit under solicitation SPE7L7-26-T-4525, with a total value of $25.00 for five units at $5.00 each, identified by NSN 6650015906625. The solicitation is a total small business set-aside under FAR 19.5, classified under NAICS code 333310, and follows simplified acquisition procedures. Delivery is required within 56 days after order placement, with an original required delivery date of February 5, 2027, and a need ship date of October 6, 2026. Items must be shipped FOB origin to the designated delivery point at DDSP New Cumberland Facility, 2083 Normandy Drive, New Cumberland, PA 17070-5002. Inspection and acceptance occur at the destination, with zero tolerance for non-conformances under specified sampling plans. The contract mandates adherence to MIL-STD-1916 or ASQ H1331 Table 1 for sampling, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Packaging must comply with ASTM D3951 for non-hazardous materials or TQ Requirement IP025 if classified hazardous per FED-STD-313, with DLA Master List requirements taking precedence. All packaging and labeling must conform to MIL-STD-129, including barcoding via 2D Data Matrix, and palletization must follow RP001. The contract incorporates numerous DFARS and FAR clauses governing cybersecurity, including safeguarding covered defense information under NIST SP 800-171 and mandatory cyber incident reporting, as well as requirements for whistleblower rights, prohibition of internal confidentiality agreements, and controls over government work product. Contractors must comply with employment eligibility verification, combating human trafficking, and sustainable products provisions. Offerors must represent their small business status and provide UEI and CAGE codes, with joint ventures required to disclose all partner information. Invoicing is exclusively through WAWF, and all technical and quality requirements from the DLA Master List are binding. The unit price appears significantly below market averages, potentially indicating an error or placeholder.
DDSP NEW CUMBERLAND FACILITY

POSTED

1 day ago

DEADLINE

in 10 days
View Details

More opportunities from Department Of Commerce Noaa

Same awarding agency

NAICS: 333310
New
Federal
Long-Range Terrestrial Lidar System SupplyThe contract seeks the supply of two long-range terrestrial lidar systems designed for survey-grade three-dimensional data collection at distances of two kilometers or greater, specifically to support NOAA’s shoreline mapping initiatives. These systems must meet stringent accuracy and performance standards to capture high-resolution topographic data along coastlines, enabling precise monitoring of erosion, sea level rise, and other dynamic environmental changes. The technology must be robust enough for field deployment under varied environmental conditions and capable of producing georeferenced datasets compatible with existing NOAA survey workflows. The opportunity is structured as a subcontract under NAICS code 333310, which classifies it within the optical instrument and camera manufacturing sector, indicating a focus on precision hardware development. The solicitation was posted on July 30, 2026, with a firm deadline for responses on August 10, 2026, at 6:00 p.m. The place of performance is designated as Silver Spring, Maryland, with a zip code of 20910, where the delivered systems are expected to be integrated, tested, and potentially calibrated prior to field use. While no set-aside designation or point of contact is provided, interested parties must ensure full compliance with NOAA’s technical, logistical, and data delivery requirements to be considered for award.
Commercial and Service Industry Machinery Manufacturing

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 236220
New
Federal
Z--Constructions Services for Staging Space Renovatio
Solicitation # 1305M326Q0271
The contract for Lab Row Staging Space Renovations at the NOAA Western Regional Center in Seattle, WA, is a firm-fixed-price, small business set-aside solicitation under NAICS code 236220, issued as RFQ 1305M326Q0271 with a response deadline of August 5, 2026. The work encompasses commercial construction services for rooms 1074 through 1077, including demolition, architectural modifications, and installation of mechanical, electrical, plumbing, and fire protection systems, while excluding sprinklers, card readers, diffusers, fire alarms, and low-voltage work. Key scope items involve infilling wall cavities for a one-hour fire rating in corridors, relocating doors and welded frames, patching plaster, painting vertical surfaces with one prime and two finish coats, installing wood or metal blocking for casework, and upgrading flooring with epoxy resin limited to the staging space floor, with final color selection to be made from the contractor’s chosen manufacturer’s standard palette. Electrical circuitry from demolished offices will be repurposed to support six new outlets without requiring additional circuits, and existing double doors are confirmed not to be fire-rated. The contractor must comply with all construction wage rate requirements, Buy American provisions, and environmental controls, and is required to provide performance and payment bonds as mandated by FAR 52.228-15. All personnel performing work must be U.S. citizens or legal immigrants, subject to security screenings, badge issuance, and inspections of personal effects. The contractor must submit an Asbestos-Containing Materials Certification, maintain active SAM registration, and provide UEID and CAGE code with the quote. A detailed technical approach, experience with building restoration, past performance, and price will be evaluated for award, with non-price factors significantly more important than cost. The schedule requires a post-award preconstruction conference with the Project Manager, Superintendent, SSHO, and QCM, who are permitted to hold multiple roles simultaneously. Invoicing must occur monthly through the IPP system, with payment terms Net 30, and final inspection requires ten working days’ notice and sign-off from the Site QC Manager. Contract administration will be managed via FedConnect, and the period of performance is one year after receipt of the notice to proceed, with no option periods. All amendments, including revised drawings and answers to contractor inquiries, are incorporated into the RFQ and must be considered in the submission, with inconsistencies
Commercial and Institutional Building Construction

POSTED

1 day ago

DEADLINE

in 5 days
View Details
NAICS: 237310
New
Federal
Asphalt Milling and Surface PreparationThe contract titled Asphalt Milling and Surface Preparation entails the complete removal of existing asphalt layers using specialized milling equipment, followed by thorough debris cleanup and site preparation to ensure optimal conditions for subsequent resurfacing. All work must be performed in compliance with industry standards to guarantee a smooth, stable base for new pavement. The undertaking is structured as a subcontract under a Total Small Business Set-Aside designation, meaning only small businesses certified by the SBA are eligible to bid, promoting opportunities for smaller enterprises within the federal contracting ecosystem. The North American Industry Classification System code 237310 applies, categorizing the work under Highway, Street, and Bridge Construction. The solicitation was posted on July 28, 2026, with a firm response deadline of August 14, 2026, at 3:00 PM Eastern Time. The contracting agency is the Department of Commerce, specifically operating under NOAA, though no specific office address or point of contact details are provided. Performance location information is unspecified, indicating the project may involve multiple sites or that precise details will be determined post-award. The opportunity is accessible via the SAM.gov platform, and interested small businesses must submit proposals before the deadline to be considered for award under this set-aside program.
Highway, Street, and Bridge Construction

POSTED

3 days ago

DEADLINE

in 14 days
View Details