Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

This Government Contract opportunity from Department Of Defense was posted on July 10, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Non-Destructive Testing (NDT) and Inspection Services

Closed
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 541380
New
SLED
Certified Hazardous Waste Analytical TestingThis subcontract opportunity with the California Department of Transportation involves providing certified chemical analyses of waste samples for prime contractors working on hazardous waste projects. The selected provider will conduct laboratory testing to determine disposal requirements and deliver analytical reports essential for manifest and profiling purposes. Performance of these services is centered in Inyo. To be eligible, the contractor must operate a state-certified laboratory holding both SWRCB-ELAP and CalEPA Environmental Laboratory Accreditation Program certifications. Interested parties must submit their responses by November 10, 2026, under NAICS code 541380.
California Department of Transportation

POSTED

about 14 hours ago

DEADLINE

in 13 days
NAICS: 541380
New
SLED
Lead Testing and Environmental SamplingThis subcontract for Lead Testing and Environmental Sampling supports prime contractors on Gwinnett County Government firing range projects. The scope of work involves performing lead-level testing and wipe sampling on cleaned surfaces and within mechanical rooms to ensure lead concentrations remain below the threshold of 400 ug/ft2. All activities must be conducted using lead sampling kits and laboratory analysis in strict accordance with EPA and OSHA lead testing standards. The selected provider is responsible for delivering comprehensive testing reports and official clearance documentation to verify that the facilities are safe for occupancy and use. This opportunity falls under NAICS code 541380 and is associated with the state of Georgia. Interested parties should note the response deadline of November 13, 2026.
Gwinnett County Government

POSTED

about 15 hours ago

DEADLINE

in 16 days
NAICS: 541380
New
SLED
Hazardous Waste Sampling and Profiling ServicesThis subcontract for Hazardous Waste Sampling and Profiling Services supports prime contractors on OC Waste and Recycling projects in California. The selected provider will perform chemical analysis and categorization of unknown or regulated waste streams, utilizing field sampling and specialized laboratory equipment such as Draeger pumps and OVA/HNU monitors to identify contaminants. All operations must be conducted by a certified environmental laboratory that maintains full compliance with California Code of Regulations Title 22. The primary deliverables for this engagement include detailed waste profile reports and formal categorization documentation. Interested parties should note that the response deadline is November 25, 2026, and the services fall under NAICS code 541380.
OC Waste & Recycling

POSTED

about 16 hours ago

DEADLINE

in 28 days
NAICS: 541380
New
SLED
Certified Independent Concrete Testing Laboratory ServicesThis subcontract for Certified Independent Concrete Testing Laboratory Services involves providing independent quality control testing for prime contractors working on Maryland Transit Administration light rail projects. The scope of work requires the securing of samples according to ASTM C 172, the curing of specimens per ASTM C 31, and the execution of compressive strength tests on cylinders to ensure a design strength of 7,000 psi. The selected provider is responsible for delivering all necessary certified test reports and comprehensive QA/QC documentation. This opportunity falls under NAICS code 541380, with a response deadline set for November 17, 2026.
Maryland Transit Administration

POSTED

about 17 hours ago

DEADLINE

in 20 days
NAICS: 541380
New
SLED
Environmental & Material Testing ServicesThis subcontract opportunity for Environmental and Material Testing Services supports prime contractors working on historic facility projects within Warren County, Virginia, specifically in Front Royal. The selected provider will be responsible for conducting comprehensive material testing and identifying hazardous substances, including lead and asbestos, while performing necessary environmental reviews. To qualify, contractors must possess the required certifications for environmental sampling and laboratory analysis. Key deliverables for this engagement include detailed material testing reports and the provision of environmental clearance or remediation plans. Interested parties must submit their responses by November 19, 2026.
Warren County

POSTED

about 17 hours ago

DEADLINE

in 22 days
NAICS: 541380
New
SLED
Third-Party Construction Materials Testing & InspectionThis subcontract for Third-Party Construction Materials Testing and Inspection supports the University of Massachusetts Medical School West Garage Modernization projects in Shrewsbury. The selected provider will perform independent quality assurance, field inspections, and materials testing for concrete, asphalt, and steel to ensure all construction materials comply with engineering specifications. Key deliverables include the submission of certified test reports and detailed inspection logs. To qualify for this engagement, the contractor must hold professional PE licensure and maintain laboratory accreditation through AASHTO or ASTM. The solicitation was posted on October 27, 2026, with a response deadline of November 17, 2026. The project falls under NAICS code 541380 and is managed through the University of Massachusetts System.
University of Massachusetts System

POSTED

about 18 hours ago

DEADLINE

in 20 days
NAICS: 541380
New
SLED
West Garage Modernization - 3rd Party Testing
Solicitation # BD-27-1109-UMMS-UMMS-134854
The University of Massachusetts System, specifically the UMass Medical School, has issued solicitation BD-27-1109-UMMS-UMMS-134854 for third party construction materials testing and inspection services as part of the West Garage Modernization project. This open market procurement is based in Shrewsbury, Massachusetts, with the performance of services occurring at the Washington Street location. The solicitation was posted on October 27, 2026, and requires responses by November 17, 2026. Administrative oversight is managed by the UPST Procurement Office, with Toby Lau serving as the primary purchaser. All inquiries and billing are directed to the office located at 50 Washington Street, Shrewsbury, MA 01581. While the contract specifies a single line item for the required testing and inspection services, the total contract value and specific unit pricing are not disclosed in the provided documentation. Proposals must be submitted through the COMMBUYS system.
University of Massachusetts System

POSTED

about 18 hours ago

DEADLINE

in 20 days
NAICS: 541380
New
SLED
Site Investigation and Field TestingThis subcontract opportunity for the City of Virginia Beach involves providing site investigation and field testing services for stormwater projects. The selected contractor will be responsible for conducting site visits, field reconnaissance, and technical testing to determine soil and site conditions using soil boring rigs and specialized equipment. Key deliverables include the provision of comprehensive site investigation reports and detailed field testing data. To qualify for this engagement, the contractor must employ a Professional Geologist or a Professional Engineer. The work will be performed within Virginia Beach under NAICS code 541380. Interested parties must submit their responses by the deadline of December 11, 2026.
City of Virginia Beach

POSTED

about 19 hours ago

DEADLINE

in about 1 month
NAICS: 541380
New
SLED
Structural Special Inspections and Third-Party ReviewThis subcontract involves providing independent third-party structural reviews and special inspections for prime contractors working on University of Connecticut facility projects. The scope of work includes conducting special inspections for concrete, masonry, and steel, as well as performing construction observation and reviewing material submittals. The selected provider is responsible for delivering comprehensive inspection reports and Statements of Special Inspections to ensure project compliance. To qualify for this engagement, the provider must hold a Connecticut Professional Engineering license and possess all relevant inspector certifications. Managed by DAS Procurement for the state of Connecticut, the solicitation was posted on October 27, 2026, with a response deadline of November 24, 2026. The contract falls under NAICS code 541380.
DAS Procurement

POSTED

about 19 hours ago

DEADLINE

in 27 days
NAICS: 541380
New
SLED
Environmental Testing & Sampling LaboratoryThis subcontract opportunity is for an Environmental Testing and Sampling Laboratory to provide specialized analysis and sampling services for prime contractors working on New York State Education Department and Office of General Services projects. The selected provider will be responsible for sampling and analyzing suspect materials, specifically focusing on lead-based paint and PCB-containing caulk, to determine if abatement is necessary. The scope of work includes the use of laboratory equipment for the detection of asbestos and PCBs, culminating in the delivery of comprehensive Hazardous Materials Survey Reports. To be eligible, the laboratory must hold certifications that meet all applicable EPA and New York State standards. This procurement falls under NAICS code 541380 and is managed through the NYS OGS Design and Construction agency. Interested parties must submit their responses by the deadline of December 9, 2026.
NYS OGS Design & Construction - Construction Contractors

POSTED

about 20 hours ago

DEADLINE

in about 1 month
NAICS: 541380
New
DIBBS
Medical Device Sterilization and PackagingThis subcontract for the Department of Defense Medical Supply Chain involves providing final sterile sealing and packaging services for prime contractors fulfilling DLA medical supply contracts. The scope of work requires the sealing of kits and the execution of EtO or Gamma radiation sterilization within a cleanroom environment, strictly adhering to ASTM D3951 and MIL-STD-129 standards. All deliverables must be provided as individually sealed, sterile boxes containing ten units each. To ensure quality and safety, the contractor must maintain sterilization validation according to ISO 11135 or 11137 and comply with Medical Marking Standard No. 1. The performance of this contract will take place in San Antonio, Texas. Interested parties should note the response deadline of November 2, 2026, for this specialized medical device sterilization and packaging requirement.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 20 hours ago

DEADLINE

in 5 days
NAICS: 541380
New
DIBBS
Aerospace NDT and Quality Inspection Services
DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 20 hours ago

DEADLINE

in 7 days

AI Contract Overview

Show more

The Department of Defense is seeking a subcontractor to provide Non-Destructive Testing (NDT) and Inspection Services for transducer components. The scope of work involves performing eddy current, ultrasonic, and magnetic particle testing to identify defects and verify that all components comply with strict military standards. This opportunity is categorized under NAICS code 541380 and will be performed in S Coffeyville, zip code 73145. The solicitation was posted on July 10, 2026, and the deadline for responses is July 27, 2026.

General Info

DoD seeks subcontractor for NDT and inspection services for transducer components in Coffeyville.

Agency

Department Of Defense → FA8122 Afsc Pzaab

NAICS

541380 - Testing Laboratories and Services

Place of Performance

S Coffeyville, OK, 73145, USA

Set-Aside

NONE

Documents

This scope was carved out of FD20302600540.

The full solicitation package (4 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Remanufacture of F110 Transducer

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed
Posted

subcontract

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → FA8122 Afsc Pzaab
ContactsNo contacts available
OfficeN/A
Organization / AgencyDepartment Of Defense → FA8122 Afsc Pzaab
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Perform eddy current, ultrasonic, and magnetic particle testing on transducer components to detect defects and ensure compliance with military standards.

More opportunities from Department Of Defense → FA8122 Afsc Pzaab

Same awarding agency

NAICS: 541380
New
Federal
Aerospace Component Inspection and NDT ServicesThis subcontract for Aerospace Component Inspection and NDT Services involves providing quality assurance and non-destructive testing for Air Force engine projects at Tinker AFB. The scope of work focuses on inspecting the material integrity, dimensions, and welds of 17-4PH stainless steel frames utilizing X-ray, Ultrasonic, and Dye Penetrant equipment. The selected provider must employ certified NDT technicians and adhere strictly to AS9100 standards to deliver necessary inspection reports and airworthiness certifications. Managed under the Department of Defense, the opportunity is categorized under NAICS code 541380. Interested parties must submit their responses by November 10, 2026. The performance of these specialized technical services will take place in the 73145 zip code area to support prime contractors on critical aerospace components.
Testing Laboratories and Services

POSTED

2 days ago

DEADLINE

in 13 days
View Details
NAICS: 332813
New
Federal
Aerospace Component Finishing and Surface TreatmentThis subcontract involves providing specialized surface treatments and aerospace-grade coatings for F118 front frames made of 17-4PH stainless steel. The work supports prime contractors on Air Force engine projects based at Tinker AFB, focusing on preventing corrosion and enhancing the durability of components operating in harsh engine environments. The project is managed under the Department of Defense and requires the service provider to hold NADCAP or equivalent aerospace finishing certifications to ensure strict quality standards. Interested parties must respond by November 10, 2026, for this effort categorized under NAICS code 332813.
Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

2 days ago

DEADLINE

in 13 days
View Details
NAICS: 336411
New
Federal
F118 Front Frame Precision Remanufacturing ServicesThis subcontract involves the precision remanufacturing of F118 Front Frames to support Air Force engine projects at Tinker AFB. The scope of work requires the machining and restoration of 221 lb stainless steel frames designed to facilitate deicing air flow through struts and support vertical engine mounts and oil supply and scavenge tubes. The project demands large-scale precision CNC machining capabilities for components measuring 60 by 60 inches, as well as the application of UID marking. Managed under the Department of Defense and NAICS code 336411, the final deliverable is the provision of fully remanufactured F118 Front Frames.
Aircraft Manufacturing

POSTED

2 days ago

DEADLINE

in 13 days
View Details
NAICS: 331419
New
Federal
17-4PH Stainless Steel Raw Material SupplierThis subcontract involves the sourcing, certification, and delivery of aerospace-grade 17-4PH Stainless Steel raw materials for prime contractors supporting Air Force engine component projects at Tinker AFB. The required material consists of certified stainless steel stock for components measuring 60 by 60 by 12 inches with a weight of 221 lbs. All materials must strictly adhere to aerospace standards and be compatible with approved sources as defined under FAR 52.209-1. Managed by the Department of Defense under agency FA8122 Afsc Pzaab, the opportunity falls under NAICS code 331419. The solicitation was posted on October 26, 2026, with a response deadline of November 10, 2026. Performance for this contract is centered in the 73145 zip code area.
Primary Smelting and Refining of Nonferrous Metal (except Copper and Aluminum)

POSTED

2 days ago

DEADLINE

in 13 days
View Details
New
Federal
F118 Front Frame Remanufacture
Solicitation # FD20302600592
Solicitation FD20302600592 is a sole source acquisition for the remanufacture of the F118 Front Frame, a 17-4PH Stainless Steel component used in F118 Engines to provide deicing air, house oil supply and scavenge tubes, and accommodate vertical engine mounts. The item measures 60 by 60 by 12 inches and weighs 221 pounds. This is a Firm Fixed Price requirements contract spanning five years, consisting of one base year and four one-year options. Each year has a base estimated quantity of 11 units, with option year deliveries required at a rate of one unit per month after receipt of order, although early delivery is acceptable. The final destination for all deliverables is Tinker Air Force Base, Oklahoma. To be eligible for award, offerors must be an approved source in accordance with FAR 52.209-1, and are encouraged to submit Source Approval Requests as soon as possible. Unique Identification requirements will apply if the unit price exceeds 5,000 dollars. The procurement is managed by the Department of Defense through the AFSC/PZAAA office at Tinker AFB, with William Loftis serving as the Contracting Officer and Samantha Lay as the Buyer. The estimated solicitation issue date is November 18, 2026, with an estimated closing date of December 18, 2026. An Ombudsman has been appointed to address contractor concerns during the proposal development phase.

POSTED

2 days ago

DEADLINE

in 13 days
View Details
NAICS: 811210
New
Federal
Precision Aerospace Component RemanufacturingThe Precision Aerospace Component Remanufacturing subcontract involves providing specialized maintenance and repair services for F110 Motional Transducer projects supporting the Air Force Sustainment Center. The scope of work includes the disassembly, cleaning, and replacement of internal components, specifically focusing on low and medium levels of repair such as the replacement of connectors and core or shaft assemblies to deliver fully remanufactured units. To execute this contract, the provider must maintain a clean-room environment and hold several critical certifications, including AS 9100, NATO AQAP2070, and CMMC. Additionally, all units must feature UID 2D data matrix marking. This Department of Defense effort is categorized under NAICS code 811210, with a response deadline set for November 23, 2026.
Electronic and Precision Equipment Repair and Maintenance

POSTED

6 days ago

DEADLINE

in 26 days
View Details
NAICS: 334417
New
Federal
Aerospace Electrical Connector SupplierThis subcontract opportunity with the Department of Defense, specifically the Air Force Sustainment Center, involves the sourcing and delivery of high-reliability, aerospace-grade electrical connectors for F110 Motional Transducer projects. The selected supplier will provide components compatible with the F110 weapon system, ensuring all parts meet strict aerospace standards for prime contractors. To ensure quality and security, the contractor must maintain AS 9100 certification and provide comprehensive Supply Chain Risk Management documentation to mitigate the risk of counterfeit parts. Interested parties must respond by November 23, 2026, for this requirement categorized under NAICS code 334417, with performance taking place in zip code 73145.
Electronic Connector Manufacturing

POSTED

6 days ago

DEADLINE

in 26 days
View Details
NAICS: 334419
New
Federal
F110 Motional Transducer Core and Shaft Assembly SupplierThis subcontract involves the manufacture and delivery of specialized internal components for the Air Force Sustainment Center F110 Motional Transducer remanufacture projects. The supplier is responsible for providing certified, flight-ready core assemblies, shaft assemblies, and major subassemblies corresponding to specific manufacturer part numbers. The contract is managed under the Department of Defense and requires strict adherence to quality and security standards, including AS 9100, ISO 9001:2000, and a Counterfeit Prevention Plan. Performance will take place in the 73145 zip code area, with a response deadline set for November 23, 2026.
Other Electronic Component Manufacturing

POSTED

6 days ago

DEADLINE

in 26 days
View Details
NAICS: 336412
New
Federal
F110 Motional Transducer Remanufacture
Solicitation # FA812227RB002
The United States Air Force, through the Air Force Sustainment Center at the Oklahoma City Logistics Center, is soliciting the remanufacture of the F110 Motional Transducer under solicitation FA812227RB002. This requirement is structured as a Firm-Fixed Price, Indefinite Delivery Requirements Type contract consisting of a one-year basic period and four one-year option periods. The scope of work includes both medium and low levels of repair, involving the replacement of core and shaft assemblies, connectors, and major subassemblies. Due to the specialized nature of the equipment, the government anticipates a sole source award to an authorized distributor of a qualified source, and all offerors must be approved sources in accordance with FAR 52.209-1. Key administrative and technical requirements include the use of the Wide Area WorkFlow system for electronic invoicing and the mandatory application of unique item identifiers using two-dimensional data matrix symbology. Offerors must comply with stringent quality standards, including ISO 9001:2000, AS 9100, and NATO AQAP2070, and must provide a Cybersecurity Maturity Model Certification unique identifier. The acquisition is unrestricted, though a 10 percent price evaluation preference is granted to HUBZone small business concerns. Deliverables include various reporting requirements such as Commercial Asset Visibility, Government Property Inventory, and Supply Chain Risk Management plans. Inspection and acceptance will occur at the DLA Distribution Depot Oklahoma at Tinker AFB.
Aircraft Engine and Engine Parts Manufacturing

POSTED

6 days ago

DEADLINE

in 29 days
View Details
NAICS: 332999
Federal
Aerospace Component Cleaning and Inspection ServicesThe Aerospace Component Cleaning and Inspection Services subcontract involves providing specialized industrial cleaning and non-destructive testing for prime contractors supporting AFSC Pzaab projects at Tinker AFB. The scope of work focuses on the cleaning of fuel system components and the execution of inspections for fatigue, wear, or cracks utilizing Dye Penetrant or Magnetic Particle equipment in strict accordance with AF Technical Orders. To qualify for this engagement, the service provider must maintain ISO 9001:2000 certification. Key deliverables include the return of cleaned components accompanied by comprehensive inspection reports. This opportunity is categorized under NAICS code 332999 and is managed under the Department of Defense.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

12 days ago

DEADLINE

in 19 days
View Details
NAICS: 336413
Federal
F108-201 Fuel Pump Component SupplierThe F108-20 Fuel Pump Component Supplier subcontract, issued by the Department of Defense for AFSC Pzaab at Tinker AFB, involves the procurement and delivery of certified aircraft-grade components. The scope of work focuses on supplying new OEM or approved equivalent long-lead parts, specifically internal pump seals, bearings, gears, or housings compatible with part numbers 708400-1 through 708400-5. Strict adherence to technical and logistical standards is required, including Item Unique Identification compliance and Mil-Std-129R packaging and marking. This opportunity falls under NAICS code 336413, with a response deadline set for November 16, 2026.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

12 days ago

DEADLINE

in 19 days
View Details
NAICS: 332911
Federal
F108-201 Main Fuel Pump RemanufactureThis subcontract involves the full-cycle remanufacture of F108-201 Main Fuel Pumps for prime contractors supporting Department of Defense projects at AFSC Pzaab, Tinker AFB. The scope of work includes the disassembly of pump assemblies, precision cleaning, and the inspection and remanufacturing of components to ensure they meet original technical specifications. Each completed pump must be delivered with a Certificate of Conformance. To qualify for this project, the provider must operate an FAA Part 145 rated facility for CFM56-2B engine components and utilize test equipment that is ANSI/NCSL 2340-1 compliant. The opportunity was posted on October 16, 2026, with a response deadline of November 16, 2026, falling under NAICS code 332911.
Industrial Valve Manufacturing

POSTED

12 days ago

DEADLINE

in 19 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

NAICS: 541380
Closed
Federal
Calibration Services for Automated Particle Counting Systems
Pearl Harbor Naval Shipyard IMF

POSTED

4 months ago

CLOSED

4 months ago
View Details
NAICS: 541380
Federal
Quality Assurance and Testing Services
Nac Federal Supply Schedule (36F797)

POSTED

4 months ago

DEADLINE

N/A
View Details
NAICS: 541380
Closed
Federal
Post-Repair Inspection and NFPA Compliance Testing
FA9301 Aftc Pzio

POSTED

4 months ago

CLOSED

3 months ago
View Details
NAICS: 541380
Closed
Federal
Quality Assurance and Government Inspection Compliance
American Embassy Bogota - Nas

POSTED

4 months ago

CLOSED

3 months ago
View Details
NAICS: 541380
Closed
Federal
NRTL Certification and Field Evaluation Services
Ornl Ut-Battelle Llc-Doe Contractor

POSTED

4 months ago

CLOSED

3 months ago
View Details
NAICS: 541380
Closed
Federal
Water Sample Laboratory Testing
Aviation Logistics Center (ALC)(00038)

POSTED

4 months ago

CLOSED

3 months ago
View Details
NAICS: 541380
Closed
Federal
Water Sample Collection and Packaging
Aviation Logistics Center (ALC)(00038)

POSTED

4 months ago

CLOSED

3 months ago
View Details
NAICS: 541380
Closed
Federal
Material Testing and Quality Assurance
W071 Endist Seattle

POSTED

4 months ago

CLOSED

3 months ago
View Details
NAICS: 541380
Closed
Federal
Negative and Positive Phage Library Selection
USDA Ars Afm Apd

POSTED

4 months ago

CLOSED

4 months ago
View Details
NAICS: 541380
Closed
Federal
Phage Display Library Preparation and Target Protein QC
USDA Ars Afm Apd

POSTED

4 months ago

CLOSED

4 months ago
View Details
NAICS: 541380
Closed
Federal
Quality Assurance and Lot Release Testing Services
256-NETWORK Contract Office 16 (36C256)

POSTED

4 months ago

CLOSED

4 months ago
View Details
NAICS: 541380
Closed
Federal
Gas Detection System Testing and Calibration Services
256-NETWORK Contract Office 16 (36C256)

POSTED

4 months ago

CLOSED

3 months ago
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS