Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Non-Destructive Testing (NDT) and Quality Assurance for Critical Safety Items

Active

Federal

Response Deadline11/10/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves providing Non-Destructive Testing (NDT) and Quality Assurance services for critical safety items, specifically the certification of turbine blades for DLA Weapons Support ASC projects. The selected contractor will perform inspections and testing for prime contractors, executing sampling in accordance with MIL-STD-1916 or ASQ H1331 while ensuring strict compliance with QAP 13873 and QAP-106. Key deliverables include validated test data, Certificates of Conformance, and detailed inspection reports. The work will be performed in Cherry Point, North Carolina, under NAICS code 541380. To qualify, the contractor must employ NDT technicians who hold both SAE AS9100 and NAS 410 certifications. This opportunity is managed by the Department of Defense through the DLA Weapons Support ASC Supplier Oper AE and AF Division.

General Info

NDT and Quality Assurance services for turbine blade certification in Cherry Point, North Carolina.

Agency

Department Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

NAICS

541380 - Testing Laboratories and Services

Place of Performance

CHERRY POINT, NC, 28533-5040, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4A7-27-T-2641.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

BLADE, TURBINE ROTOR, AI

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 2

subcontract

Response DeadlineNov 10

Submission deadline

Response Deadline

11/10/2026, 05:00:00 PM UTCin 8 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs inspection and testing for prime contractors on DLA Weapons Support ASC projects to certify turbine blades. Executes sampling IAW MIL-STD-1916 or ASQ H1331 and verifies compliance with QAP 13873 and QAP-106. Requires SAE AS9100 and NAS 410 certified NDT technicians. Delivers inspection reports, Certificates of Conformance, and validated test data.

Similar Contracts

Same NAICS industry code

RFQ#9783 Respirable Crystalline Silica Exposure Assessment

Solicitation # rfq9783-respirable-crystalline-silica-exposure-assessment

Edison Job Corps

POSTED

about 2 hours ago

DEADLINE

First Article Testing (FAT) for Indicator Light FiltersThis subcontract involves performing specialized First Article Testing (FAT) for indicator light filters supporting the DLA Weapons Support Nuclear Reactor Program. The selected contractor will conduct tests on three initial production units to validate that their optical and physical properties comply with MIL-DTL-16377/42C and MIL-DTL-16377K SUP 1 standards. Key operational requirements include coordinating with Quality Assurance Representatives, providing shipment notices 14 days in advance, and delivering final test reports. The work is categorized under NAICS code 541380 and will be performed in Jacksonville, with a response deadline of November 13, 2026.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

about 8 hours ago

DEADLINE

Production Lot Testing (PLT) ServicesThis subcontract for Production Lot Testing services supports prime contractors on projects for the Department of Defense DLA Weapons Support ASC Commodities Division. The scope of work involves validating signal integrity, insulation resistance, and electrical continuity in accordance with reference drawings and MIL-STD-105/ASQ Z1.4 standards. Performance will take place in New Cumberland, Pennsylvania, and requires the use of calibrated Measurement and Test Equipment. To qualify, providers must maintain ISO 9001:2015 or ISO/IEC 17025 certification and ensure full compliance with ITAR and EAR regulations. The successful contractor is responsible for delivering a formal Certification of Compliance and a detailed PLT Test Report. The response deadline for this opportunity is November 10, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 8 hours ago

DEADLINE

First Article Testing and Certification ServicesThis subcontract for First Article Testing and Certification Services supports the Department of Defense through the DLA Weapons Support LSO Combat Vehicles and Armament. The selected provider will perform critical validation of manufacturing processes and product compliance for three initial units of NSN 5999-01-463-0571. This scope of work involves utilizing specialized electrical and physical property testing equipment to ensure all specifications are met, with the final deliverable being a formal First Article Test Report due within 30 days of the contract date. To be eligible, the performing facility must maintain approval under ISO 9001 or AS9003 quality systems. The work is designated under NAICS code 541380 and will be performed in Tracy, California. Interested parties must adhere to the response deadline of November 13, 2026.

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 8 hours ago

DEADLINE

First Article and Production Lot Testing (FAT/PLT) ServicesThis subcontract opportunity is for the provision of specialized First Article Testing and Production Lot Testing services to support prime contractors for the DLA Weapons Support Aviation Supply Chain. The scope of work involves conducting First Article Tests on two units and Production Lot Testing on three random samples specifically for Critical Safety Items. To ensure precision and compliance, the contractor must utilize NIST-calibrated metrology equipment and perform material hardness and tensile testing, ultimately delivering certified test reports. Eligible bidders must hold ISO/IEC 17025 or AS9100 certification and meet the requirements for a Total Small Business Set-Aside under NAICS code 541380. The performance of these services will take place in Jacksonville, Florida. Interested parties must submit their responses by November 10, 2026.

DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN

POSTED

about 8 hours ago

DEADLINE

Quality Assurance and Certification for Critical Safety ItemsThis subcontract, titled Quality Assurance and Certification for Critical Safety Items, is issued by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div. The project involves providing independent verification and certification services for prime contractors, specifically focusing on the verification of Critical Safety Item tolerances using NIST-calibrated metrology equipment. The selected provider must execute sampling plans according to MIL-STD-1916 or ASQ H1331, prepare Source Approval Request documentation, and maintain strict SAE AS9100 compliance to deliver certified Inspection Reports and Certificates of Conformance. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 541380, with the place of performance located in New Cumberland. Interested parties must submit their responses by November 10, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 8 hours ago

DEADLINE

Specialized Testing ServicesThis subcontract opportunity for Specialized Testing Services supports the DLA Weapons Support Maritime Supply Chain within the Department of Defense. The selected provider will perform technical testing and validation for prime contractors, specifically executing electrical functionality and signal integrity tests according to DWG 8126491 Test Procedures. The scope of work involves using specialized test jigs and diagnostic equipment to deliver certified assemblies and detailed test reports. This is a Total Small Business Set-Aside under NAICS code 541380. Due to the nature of the defense work, contractors must maintain CMMC Level 2 certification and ensure full ITAR and EAR compliance. The solicitation was posted on November 2, 2026, with a response deadline of November 17, 2026.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 8 hours ago

DEADLINE

First Article Test (FAT) and Certification ServicesThis subcontract for the DLA Weapons Support Aviation Supply Chain involves providing initial validation testing and quality inspection services for prime contractors. The primary scope of work focuses on the execution of First Article Tests as specified under CLIN 0002, which includes the verification of critical, major, and minor attributes. These inspections must be conducted using sampling plans MIL-STD-1916 or ASQ H1331, and all measuring and test equipment used must be calibrated according to RT001 standards. The project is based at Robins Air Force Base and requires the delivery of an approved first article unit along with a formal FAT Certification Report. Classified under NAICS code 541380, the contract is managed by the Department of Defense. Interested parties should note the response deadline of November 10, 2026.

DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN

POSTED

about 8 hours ago

DEADLINE

First Article Testing (FAT) for Screw Thread InsertsThis subcontract involves First Article Testing for screw thread inserts to support the DLA Weapons Support ASC Commodities Division. The selected contractor is responsible for performing initial production validation and testing, which includes the production and delivery of three initial units for government testing within 180 calendar days. All units must be validated for dimensions and material properties against Drawing NR 07482 1279M79 using appropriate metrology and inspection equipment, with final deliverables consisting of the test units and detailed inspection reports. The project is a total small business set-aside under NAICS code 541380, with performance taking place at Tinker AFB. To be eligible, contractors must hold SAE AS9003 or ISO 9001 certification and maintain ITAR/EAR approval. Interested parties must respond by November 10, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 8 hours ago

DEADLINE

Quality Assurance and Traceability VerificationThis subcontract for the DLA Weapons Support Nuclear Reactor Program focuses on providing independent verification of technical compliance and supply chain traceability for prime contractors. The scope of work involves auditing documentation according to DLA Directive Procurement Note C03 and ensuring part marking adheres to MIL-STD-129 and IPC/JEDEC J-STD-609 standards. Additionally, the contractor is responsible for using precision measurement tools to verify lead finishes and delivering comprehensive quality inspection reports and traceability certification packages. The project is managed under NAICS code 541380 for the Department of Defense and will be performed at Hill AFB. Interested parties should note the response deadline of November 13, 2026, for this quality assurance and traceability verification effort.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

about 8 hours ago

DEADLINE

First Article Testing (FAT) and Certification ServicesThis subcontract for First Article Testing (FAT) and Certification Services supports prime contractors on DLA Weapons Support ASC projects. The selected provider will utilize calibrated metrology and inspection equipment to verify the dimensions, material properties, and performance of three sample units against the established technical data package. The primary deliverable for this engagement is one completed First Article Test Report. The opportunity is a total small business set-aside under NAICS code 541380 for the Department of Defense. Due to the nature of the technical data involved, the contractor must maintain ITAR/EAR compliance and hold CMMC Level 2 certification. Responses are due by November 16, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 8 hours ago

DEADLINE

First Article Test (FAT) and CertificationThis subcontract involves performing First Article Testing and Certification for the DLA Weapons Support ASC Commodities Division. The selected contractor will validate manufacturing processes by testing three initial units of NSN 5315-00-495-6522 using precision metrology and inspection equipment. The project requires the delivery of a formal test report and the three tested units within a period of 180 calendar days. The performance of this contract will take place in Tracy, California, under NAICS code 541380. Due to the handling of covered defense information, the contractor must maintain CMMC Level 2 certification. Interested parties should note the response deadline of November 10, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 8 hours ago

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

Same awarding agency

Supply of Turnlock Fastener ReceptaclesThis subcontract involves the supply of two Turnlock Fastener Receptacles, specifically part BACS22A32, manufactured or sourced according to Basic Drawing NR 81205 BACS22A Revision W. The contract supports prime contractors delivering to the Department of Defense via the DLA Weapons Support ASC Supplier Oper AE and AF Div, with performance taking place in San Diego. The provider must adhere to strict technical and regulatory standards, including MIL-STD-129 for marking, RP001 and MIL-STD-2073-1E for packaging, and MIL-STD-1916 or ASQ H1331 for sampling plans. Additionally, the contract mandates full compliance with the Buy American Act and NIST SP 800-171 cybersecurity standards.

Hardware Manufacturing

POSTED

about 8 hours ago

DEADLINE

Manufacturing of Aileron Counter Balance ShieldsThis subcontract involves the manufacture and supply of four certified precision-machined aileron counter balance shields for prime contractors supporting DLA Weapons Support supply contracts. The components must be fabricated using aerospace-grade alloys and precision CNC machining in strict accordance with reference drawings 98897 STP51-302 (Rev AJ) and 98897 4J53005/1 (Rev K). All production must adhere to the DLA Master List of Technical and Quality Requirements (RA001). The project is managed under the Department of Defense through the DLA Weapons Support ASC Supplier Oper AE and AF Div, with the place of performance located at Robins Air Force Base. The contract falls under NAICS code 336413, with a response deadline set for November 10, 2026.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 8 hours ago

DEADLINE

MIL-SPEC Packaging and Export Logistics ProviderThis subcontract, issued by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div, requires a provider to perform specialized military packaging and export logistics for prime contractors. The scope of work involves packaging and marking items in strict accordance with MIL-STD-2073-1E, MIL-STD-129, and DLA RP001 standards, followed by the coordination of freight shipping and final delivery of components to King Abdullah Air Base in Saudi Arabia. The provider must maintain full compliance with DFARS 252.204-7012 and all applicable ITAR and EAR export regulations. This opportunity falls under NAICS code 488510 and was posted on November 2, 2026, with a response deadline of November 10, 2026.

Freight Transportation Arrangement

POSTED

about 8 hours ago

DEADLINE

Fanning Strip Manufacturer (NSN 5975-01-35-4738)This subcontract involves the manufacture and delivery of five Fanning Strips for prime contractors supporting DLA Weapons Support ASC projects. The components must be produced according to NSN 5975-01-35-4738 specifications using JCP technical data. To ensure production quality, the manufacturer is required to implement quality management systems compliant with either SAE AS9003 or ISO 9001 standards. The selected provider must hold active ITAR, EAR, and JCP certifications to be eligible for the award. This Department of Defense requirement falls under NAICS code 335999 and is managed by the DLA Weapons Support ASC Supplier Oper AE and AF Div.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 8 hours ago

DEADLINE

Aerospace Component Packaging and Marking ServicesThe Aerospace Component Packaging and Marking Services subcontract involves providing specialized packaging and marking for prime contractors supporting DLA supply contracts. The scope of work includes packaging components according to RP001 standards, performing bare item marking per RQ017, and applying hazard warning labels in compliance with DFARS 252.223-7001. To ensure government shipment readiness, the contractor will utilize industrial etching equipment and military-grade packaging materials to process nozzles. This project is managed under the Department of Defense through the DLA Weapons Support ASC Supplier Oper AE and AF Div, with performance taking place at Tinker AFB. The opportunity was posted on November 2, 2026, with a response deadline of November 10, 2026. It is categorized under NAICS code 493110.

General Warehousing and Storage

POSTED

about 8 hours ago

DEADLINE

Lubricating Nozzle ManufacturerThis subcontract involves the manufacture of lubricating nozzles for prime contractors supporting DLA Aviation projects, specifically for NSN 2840-01-256-2029. The selected manufacturer is responsible for fabricating nozzles to strict military specifications, executing First Article Tests as outlined in CLIN 0002, and performing bare item marking according to RQ017. Due to the nature of the components, the contractor must utilize precision machining equipment and maintain full CSI compliance for Critical Safety Items. The project is managed under the Department of Defense through the DLA Weapons Support ASC Supplier OE and AF Div, with performance taking place at Tinker AFB. The final deliverables include the finished lubricating nozzles and the required FAT certification. Interested parties must adhere to the response deadline of November 10, 2026, as specified in the solicitation.

Aircraft Engine and Engine Parts Manufacturing

POSTED

about 8 hours ago

DEADLINE

Aerospace Grade Material SupplyThis subcontract opportunity, titled Aerospace Grade Material Supply, is issued by the Department of Defense under the DLA Weapons Support ASC Supplier OE and AF Division. The contract involves the provision of raw materials and semi-finished components for prime contractors working on aircraft projects. All supplied materials must strictly adhere to specific Boeing specifications, including BMS8-80, BMS8-80V, BAC5004, BAC5300-1, BAC5300-2, BAC5307, and BAC5423, and must be delivered with comprehensive mill test reports. The project is designated as a Total Small Business Set-Aside under FAR 19.5 and falls under NAICS code 332999. Performance will take place at Tinker AFB. To ensure regulatory compliance, all materials must meet the requirements of the Buy American Act and the Berry Amendment. The response deadline for this solicitation is November 10, 2026.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 8 hours ago

DEADLINE

Aircraft HVAC Duct Assembly ManufacturingThis subcontract opportunity is for the fabrication of air conditioning and heating duct assemblies to support DLA Weapons Support ASC aircraft projects. The selected contractor will manufacture assemblies in strict accordance with Reference Drawing NR 13873 012802809-18093 and EI-012802809, ensuring all units are completed and inspected. Compliance with MIL-STD-130 for IUID implementation and ASTM D3951 for packaging is mandatory. The project is a total small business set-aside under NAICS code 336413, with performance taking place at Tinker AFB. Qualified bidders must hold SAE AS9003 or ISO 9001 certification and maintain US/Canada Joint Certification Program approval. Responses are due by November 10, 2026.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 8 hours ago

DEADLINE

Precision Fabrication of Accumulator AssembliesThis subcontract, titled Precision Fabrication of Accumulator Assemblies, is a total small business set-aside issued by the Department of Defense for the DLA Weapons Support ASC. The project requires the precision machining of three Accumulator Assemblies, specifically part number 47614, in accordance with provided technical drawings. The scope of work excludes additive manufacturing and mandates strict adherence to MIL-STD-1916 or ASQ H1331 for sampling, RQ017 for bare item marking, and MIL-STD-2073-1E for packaging and delivery. To be eligible, contractors must hold SAE AS9100 certification and maintain CMMC Level 2 compliance. The work is to be performed in New Cumberland, Pennsylvania. Interested parties must respond by November 10, 2026, to fulfill the requirements of this specialized fabrication effort under NAICS code 336413.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 8 hours ago

DEADLINE

Supply of Military-Grade Textiles for Parachute PocketsThis subcontract involves the supply of military-grade raw textile materials and synthetic fabrics specifically intended for parachute pockets. The materials must strictly adhere to the DLA Master List of Technical and Quality Requirements for NSN 1670-00-988-3093 and be delivered as either certified raw fabric rolls or pre-cut textile kits. To ensure regulatory compliance, all sourced materials must meet the standards set by the Berry Amendment and the Buy American Act. Managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div, the contract is categorized under NAICS code 313320. Performance of the contract will take place at Tinker AFB. The solicitation was posted on November 2, 2026, with a response deadline set for November 10, 2026.

Fabric Coating Mills

POSTED

about 8 hours ago

DEADLINE

Manufacture of Parachute Pack Minimum Survival PocketsThis subcontract involves the full-scale fabrication and assembly of 631 Minimum Survival Pockets for prime contractors supporting DLA supply contracts. The work must be performed according to NSN 1670-00-988-3093 using industrial textile cutting and sewing equipment, with First Article Testing conducted at Wright Patterson AFB. Performance of the contract is centered at Tinker AFB. To be eligible, the contractor must hold SAE AS9003 or ISO 9001 certification and maintain US/Canada Joint Certification Program approval to ensure ITAR and EAR compliance. The project is managed under the Department of Defense through the DLA Weapons Support ASC Supplier OE and AF Div.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 8 hours ago

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

Magnetic Particle Inspection Services

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 8 hours ago

DEADLINE

Electrical Continuity and Insulation Testing Services

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 8 hours ago

DEADLINE

First Article Test (FAT) and Engineering Validation

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 8 hours ago

DEADLINE

Critical Application Inspection and Sampling

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 8 hours ago

DEADLINE

Quality Assurance and Testing for Critical Safety Items

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 8 hours ago

DEADLINE

Non-Destructive Testing (NDT) for Seal Ring Couplings

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 8 hours ago

DEADLINE

Aerospace Quality Assurance and Certification Services

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 8 hours ago

DEADLINE

First Article Test (FAT) Services for Plug Assembly

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 8 hours ago

DEADLINE

Third-Party Quality Assurance and Source Inspection Services

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 8 hours ago

DEADLINE

First Article Testing and Validation for Aerospace Pressure Plates

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 8 hours ago

DEADLINE

First Article Testing (FAT) and Quality Validation

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 8 hours ago

DEADLINE

Production Lot Testing (PLT) and Quality Validation Services

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 8 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS