This Government Contract opportunity from Department Of Defense was posted on August 5, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Non-Destructive Testing (NDT) and Quality Assurance Services

Closed

Federal

Submission Closed08/21/2026, 08:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 541380

New

SLED

Non-Destructive Testing (NDT) for OCS ConductorsThis subcontract involves providing independent non-destructive testing and inspection of aluminum conductors for prime contractors working on California High-Speed Rail Authority projects in Wasco, California. The primary objective is to verify that conductors comply with EN/IEC standards by identifying any existing defects, corrosion, or contamination. The selected provider is responsible for delivering comprehensive certified NDT test reports and formal compliance certifications. To ensure technical quality, all personnel performing the inspections must be certified under ASNT Recommended Practice No. SNT-TC-1A. This opportunity falls under NAICS code 541380, with a response deadline set for November 19, 2026.

California High-Speed Rail Authority

POSTED

DEADLINE

Optical Performance Validation & TestingThe Optical Performance Validation and Testing subcontract is a U.S. Air Force initiative focused on the independent verification and validation of amplifier performance for prime contractors working on Low SWaP 2-micron fiber amplifier projects. The selected provider will be responsible for characterizing spectral purity, noise figure, and gain using beam profilers and Optical Spectrum Analyzers, ultimately delivering comprehensive performance validation data and technical test reports. This opportunity is designated as a Total Small Business Set-Aside under NAICS code 541380, specifically adhering to SBIR/STTR mandates for companies with fewer than 500 employees. Interested parties must submit their responses by November 25, 2026, to support this Department of Defense effort.

POSTED

DEADLINE

Ultrasonic and Dye Penetrant Inspection ServicesThis subcontract for Ultrasonic and Dye Penetrant Inspection Services involves providing non-destructive testing for prime contractors supporting NAVSUP Weapon Systems Support projects. The scope of work includes performing ultrasonic inspections on starting materials and dye penetrant surface inspections on finished Union and Tailpiece components. All testing must be conducted using approved UT equipment and PT kits in strict accordance with EB Specification 2937 and NAVSEA T9074-AS-GIB-010-271. The contractor is responsible for delivering all required testing certifications and Certification Data CDRLs utilizing DD Form 1423. This opportunity falls under NAICS code 541380 and is managed by the Department of Defense. Interested parties should note the response deadline of November 9, 2026.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Laser Testing and Metrology ServicesThe Laser Testing and Metrology Services subcontract is a U.S. Air Force initiative focused on providing independent verification and validation for prime contractors working on laser system projects. The scope of work involves conducting critical technical assessments, including beam profiling, power measurement, and stability testing. These activities are performed within high-power laser safety facilities utilizing specialized equipment such as beam analyzers and interferometers to produce essential performance validation data and technical test reports. This opportunity is designated as a Total Small Business Set-Aside under NAICS code 541380, specifically targeting firms with fewer than 500 employees in alignment with SBIR/STTR mandates. Interested parties must submit their responses by November 25, 2026, to support the U.S. Department of Defense in ensuring the operational integrity of advanced laser technologies.

POSTED

DEADLINE

Facility & Equipment Provider

POSTED

DEADLINE

Power Systems Testing and Validation ServicesThe Power Systems Testing and Validation Services subcontract supports U.S. Air Force Advanced Reserve Power Source Technologies projects by providing scientific testing, characterization, and validation of power source prototypes for prime contractors. The scope of work includes conducting cycle testing, thermal stability analysis, discharge rate testing, and environmental stress screening using calibrated laboratory equipment to deliver essential technical test reports and validation data. This opportunity is designated as a Total Small Business Set-Aside under NAICS code 541380, specifically adhering to SBIR/STTR mandates for companies with fewer than 500 employees. Interested parties must submit their responses by November 25, 2026, to support the U.S. Department of Defense and the U.S. Air Force in advancing power system technologies.

POSTED

DEADLINE

Specialized Laboratory / Testing Facility

POSTED

DEADLINE

TDR Sensor Performance Testing

POSTED

DEADLINE

Aviation Component Inspection and Test Services

Ok DLA Aviation At Oklahoma City

POSTED

DEADLINE

Electronic Component Testing and Inspection Services

Navsup Weapon Systems Support

POSTED

DEADLINE

Specialized Testing and Validation Provider

POSTED

DEADLINE

Materials Testing and Quality AssuranceThe Materials Testing and Quality Assurance subcontract for the Lakehaven Water and Sewer District involves providing independent materials testing services for prime contractors. The scope of work includes testing water distribution materials upon delivery, verifying the grade and density of Hot Mix Asphalt, and confirming the compaction of backfill and Controlled Density Fill. Qualified bidders must utilize an accredited testing laboratory to perform these services and are responsible for delivering all necessary material testing reports and certifications. The response deadline for this opportunity is November 17, 2026.

Lakehaven Water and Sewer District

POSTED

about 3 hours ago

DEADLINE

in 20 days

AI Contract Overview

The Department of Defense, through the Defense Contract Management Office, is seeking a subcontractor to provide Non-Destructive Testing (NDT) and Quality Assurance Services. The primary objective of this contract is to perform and document critical inspections of additive manufactured components using CT scanning, ultrasonic, and X-ray technologies to ensure all parts meet established technical and quality standards. This opportunity is categorized under NAICS code 541380. Interested parties must submit their responses by the deadline of August 21, 2026. The contract focuses on rigorous validation processes to maintain the structural integrity and quality of advanced manufacturing outputs.

General Info

DoD seeks subcontractor for NDT and quality assurance of additive manufactured components.

Agency

Department Of Defense → Defense Contract Managment Office

NAICS

541380 - Testing Laboratories and Services

Place of Performance

24420, VA, USA

Set-Aside

NONE

Documents

This scope was carved out of S5121A-SourcesSought.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Additive Manufacture (AM) Suppliers

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedAug 5

subcontract

Response DeadlineAug 21

Deadline has passed

Submission Closed

08/21/2026, 08:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → Defense Contract Managment Office

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → Defense Contract Managment Office

Office AddressN/A

ContactsNo contact information available

Full Description

Perform and document inspections (CT scanning, ultrasonic, X-ray) to validate additive manufactured components per DoW technical and quality standards.