Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

This Government Contract opportunity from Department Of Defense was posted on August 3, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Non-Destructive Testing (NDT) and Quality Inspection Services

Closed
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 541380
New
SLED
Non-Destructive Testing (NDT) for OCS ConductorsThis subcontract involves providing independent non-destructive testing and inspection of aluminum conductors for prime contractors working on California High-Speed Rail Authority projects in Wasco, California. The primary objective is to verify that conductors comply with EN/IEC standards by identifying any existing defects, corrosion, or contamination. The selected provider is responsible for delivering comprehensive certified NDT test reports and formal compliance certifications. To ensure technical quality, all personnel performing the inspections must be certified under ASNT Recommended Practice No. SNT-TC-1A. This opportunity falls under NAICS code 541380, with a response deadline set for November 19, 2026.
California High-Speed Rail Authority

POSTED

about 3 hours ago

DEADLINE

in 22 days
NAICS: 541380
New
SBIR / STTR
Optical Performance Validation & TestingThe Optical Performance Validation and Testing subcontract is a U.S. Air Force initiative focused on the independent verification and validation of amplifier performance for prime contractors working on Low SWaP 2-micron fiber amplifier projects. The selected provider will be responsible for characterizing spectral purity, noise figure, and gain using beam profilers and Optical Spectrum Analyzers, ultimately delivering comprehensive performance validation data and technical test reports. This opportunity is designated as a Total Small Business Set-Aside under NAICS code 541380, specifically adhering to SBIR/STTR mandates for companies with fewer than 500 employees. Interested parties must submit their responses by November 25, 2026, to support this Department of Defense effort.
U.S. Air Force

POSTED

about 3 hours ago

DEADLINE

in 28 days
NAICS: 541380
New
Federal
Ultrasonic and Dye Penetrant Inspection ServicesThis subcontract for Ultrasonic and Dye Penetrant Inspection Services involves providing non-destructive testing for prime contractors supporting NAVSUP Weapon Systems Support projects. The scope of work includes performing ultrasonic inspections on starting materials and dye penetrant surface inspections on finished Union and Tailpiece components. All testing must be conducted using approved UT equipment and PT kits in strict accordance with EB Specification 2937 and NAVSEA T9074-AS-GIB-010-271. The contractor is responsible for delivering all required testing certifications and Certification Data CDRLs utilizing DD Form 1423. This opportunity falls under NAICS code 541380 and is managed by the Department of Defense. Interested parties should note the response deadline of November 9, 2026.
Navsup Weapon Systems Support Mech

POSTED

about 3 hours ago

DEADLINE

in 12 days
NAICS: 541380
New
SBIR / STTR
Laser Testing and Metrology ServicesThe Laser Testing and Metrology Services subcontract is a U.S. Air Force initiative focused on providing independent verification and validation for prime contractors working on laser system projects. The scope of work involves conducting critical technical assessments, including beam profiling, power measurement, and stability testing. These activities are performed within high-power laser safety facilities utilizing specialized equipment such as beam analyzers and interferometers to produce essential performance validation data and technical test reports. This opportunity is designated as a Total Small Business Set-Aside under NAICS code 541380, specifically targeting firms with fewer than 500 employees in alignment with SBIR/STTR mandates. Interested parties must submit their responses by November 25, 2026, to support the U.S. Department of Defense in ensuring the operational integrity of advanced laser technologies.
U.S. Air Force

POSTED

about 3 hours ago

DEADLINE

in 28 days
NAICS: 541380
New
SBIR / STTR
Facility & Equipment Provider
U.S. Air Force

POSTED

about 3 hours ago

DEADLINE

in 28 days
NAICS: 541380
New
SBIR / STTR
Power Systems Testing and Validation ServicesThe Power Systems Testing and Validation Services subcontract supports U.S. Air Force Advanced Reserve Power Source Technologies projects by providing scientific testing, characterization, and validation of power source prototypes for prime contractors. The scope of work includes conducting cycle testing, thermal stability analysis, discharge rate testing, and environmental stress screening using calibrated laboratory equipment to deliver essential technical test reports and validation data. This opportunity is designated as a Total Small Business Set-Aside under NAICS code 541380, specifically adhering to SBIR/STTR mandates for companies with fewer than 500 employees. Interested parties must submit their responses by November 25, 2026, to support the U.S. Department of Defense and the U.S. Air Force in advancing power system technologies.
U.S. Air Force

POSTED

about 3 hours ago

DEADLINE

in 28 days
NAICS: 541380
New
SBIR / STTR
Specialized Laboratory / Testing Facility
U.S. Air Force

POSTED

about 3 hours ago

DEADLINE

in 28 days
NAICS: 541380
New
SBIR / STTR
TDR Sensor Performance Testing
U.S. Navy

POSTED

about 3 hours ago

DEADLINE

in 28 days
NAICS: 541380
New
Federal
Aviation Component Inspection and Test Services
Ok DLA Aviation At Oklahoma City

POSTED

about 3 hours ago

DEADLINE

in about 1 month
NAICS: 541380
New
Federal
Electronic Component Testing and Inspection Services
Navsup Weapon Systems Support

POSTED

about 3 hours ago

DEADLINE

in about 1 month
NAICS: 541380
New
SBIR / STTR
Specialized Testing and Validation Provider
U.S. Air Force

POSTED

about 3 hours ago

DEADLINE

in 28 days
NAICS: 541380
New
SLED
Materials Testing and Quality AssuranceThe Materials Testing and Quality Assurance subcontract for the Lakehaven Water and Sewer District involves providing independent materials testing services for prime contractors. The scope of work includes testing water distribution materials upon delivery, verifying the grade and density of Hot Mix Asphalt, and confirming the compaction of backfill and Controlled Density Fill. Qualified bidders must utilize an accredited testing laboratory to perform these services and are responsible for delivering all necessary material testing reports and certifications. The response deadline for this opportunity is November 17, 2026.
Lakehaven Water and Sewer District

POSTED

about 3 hours ago

DEADLINE

in 20 days

AI Contract Overview

Show more

The contract requires the performance of Level IV non-destructive testing services on military components using dye penetrant, magnetic particle, and ultrasonic inspection techniques, with full certification and detailed test reports provided for all work completed. This is a small business set-aside subcontract under the NAICS code 541380, exclusively reserved for total small business participation as defined by the SBA, ensuring that only qualified small businesses may bid. The work is being procured by the Strategic Acquisition Program Directorate within the Department of Defense, and all testing must meet stringent military standards for quality and reliability. Proposals must be submitted by the response deadline of August 18, 2026, with the solicitation posted on August 3, 2026, and the place of performance and specific location details are not specified in the release.

General Info

Level IV NDT services for military components, small business set-aside, DOD procurement, due August 18, 2026.

Agency

Department Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATE

NAICS

541380 - Testing Laboratories and Services

Place of Performance

USA

Set-Aside

SBA

Documents

This scope was carved out of SPE7LX-26-U-9172.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

CONNECTING LINK, RIGID

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed
Posted

subcontract

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATE
ContactsNo contacts available
OfficeN/A
Organization / AgencyDepartment Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATE
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Perform Level IV NDT (dye penetrant, magnetic particle, ultrasonic) on military components and provide certification and test reports.

More opportunities from Department Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATE

Same awarding agency

NAICS: 561910
New
DIBBS
Military-Grade Packaging and Palletization ServicesThis subcontract, issued by the Department of Defense under the Strategic Acquisition Program Directorate, requires specialized packaging, marking, and palletization services for prime contractors on DLA supply contracts. The scope of work involves the processing of 78 springs, ensuring they are fully prepared for transport using industrial marking equipment and MIL-SPEC materials. Compliance is mandatory across three primary standards: packaging must adhere to MIL-STD-2073-1E, marking must follow MIL-STD-129, and palletization must meet RP001 DLA Packaging Requirements. The project falls under NAICS code 561910 and was posted on October 27, 2026, with a response deadline of October 30, 2026.
Packaging and Labeling Services

POSTED

about 22 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332613
New
DIBBS
Manufacturing of Flat Springs (NSN 5360-01-474-9602)This subcontract involves the manufacture and supply of 78 flat springs under NSN 5360-01-474-9602 for prime contractors supporting DLA supply contracts. The work is managed by the Strategic Acquisition Program Directorate within the Department of Defense and falls under NAICS code 332613. Fabrication must adhere to exact technical specifications using either additive manufacturing equipment or spring winding and forming machinery. To be eligible, the provider must maintain active SAM registration and ensure full compliance with DFARS 252.204-7018. The solicitation was posted on October 27, 2026, with a response deadline of October 30, 2026.
Spring Manufacturing

POSTED

about 22 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332613
New
DIBBS
SPRING, FLAT
Solicitation # SPE7LX-26-U-9768
This solicitation, issued by the DLA Land and Maritime Strategic Acquisition Program Directorate, is for the procurement of flat springs identified by NSN 5360014749602. The requirement consists of an estimated quantity of 78 units with a delivery timeline of 104 days. The acquisition is categorized under NAICS code 332613 and is managed by point of contact Theodore Misiolek. Award evaluation will be based on the price quoted for the estimated annual demand. The contract mandates strict adherence to technical and quality requirements found in the DLA Master List, including specific prohibitions against the intentional addition of mercury or mercury-containing compounds. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements (RP001). Inspection and acceptance will occur at the destination per FAR 52.246-1. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and compliance with the Berry Amendment and Buy American Act regarding domestic material sourcing. Order limitations are set with a minimum order of 39 units and a maximum order value of 350,000 dollars.
Spring Manufacturing

POSTED

about 22 hours ago

DEADLINE

in 2 days
View Details
NAICS: 423830
DIBBS
Hardware Distribution (NSN 2530-01-630-3036)This subcontract, managed by the Strategic Acquisition Program Directorate under the Department of Defense, involves the distribution of molded pins identified by NSN 2530-01-630-3036. The selected provider is responsible for sourcing these components from approved manufacturers, managing all delivery logistics, and providing verifiable documentation to ensure the authenticity of the hardware. To be eligible, the contractor must hold authorized dealer status or possess express written authority from the approved source. The contract requires the delivery of the specified quantity of pins along with all necessary authenticity certifications. The response deadline for this opportunity is November 2, 2026.
Industrial Machinery and Equipment Merchant Wholesalers

POSTED

27 days ago

DEADLINE

in 5 days
View Details
NAICS: 339999
DIBBS
Molded Pin ManufacturingThis subcontract, managed by the Strategic Acquisition Program Directorate under the Department of Defense, involves the manufacturing of molded pins for prime contractors supporting DLA supply contracts. The selected provider must fabricate and mold pins according to NSN 2530-01-630-3036 specifications, ensuring all items undergo quality control testing for compliance and are packaged and marked in accordance with MIL-STD-129. The contractor is required to possess molding machinery capable of producing this specific pin design to fulfill a delivery quantity ranging from 16,750 to 31,729 units. The opportunity was posted on October 1, 2026, with a response deadline of November 2, 2026. Classified under NAICS code 339999, the contract focuses on precise technical execution and adherence to military standards for delivery and marking. Interested parties can find further details through the provided DIBBS solicitation link.
All Other Miscellaneous Manufacturing

POSTED

27 days ago

DEADLINE

in 5 days
View Details
NAICS: 334418
DIBBS
Supplier of Circuit Card Assemblies (CCAs)This subcontract, managed by the Strategic Acquisition Program Directorate under the Department of Defense, seeks a supplier to provide specialized printed circuit card assemblies for prime contractors fulfilling DLA supply contracts. The scope of work specifically involves the manufacture or distribution of CCAs identified by NSN 5998016457646 (Part 740X373) and NSN 5998016459430 (Part 740X372), with an expected annual delivery volume of over 35 units. The contract falls under NAICS code 334418 and requires strict adherence to the Buy American and Balance of Payments Program regulations. Interested parties must submit their responses by the deadline of October 28, 2026.
Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

30 days ago

DEADLINE

in about 2 hours
View Details
NAICS: 334417
DIBBS
Supplier of Electronic Connector AssembliesThis subcontract, managed by the Department of Defense Strategic Acquisition Program Directorate, requires a supplier to manufacture or distribute specialized electronic connector assemblies. The scope specifically covers NSN 5935016458488 and Approved Part Number 740X458, with a delivery requirement of 37 units annually to support prime contractors fulfilling DLA supply contracts. The contract falls under NAICS code 334417 and mandates strict adherence to the Buy American and Balance of Payments Program. Interested parties must respond by October 28, 2026, following the posting date of September 28, 2026.
Electronic Connector Manufacturing

POSTED

30 days ago

DEADLINE

in about 2 hours
View Details
NAICS: 332322
DIBBS
Supplier of Shop Maintenance TraysThis subcontract, managed by the Strategic Acquisition Program Directorate under the Department of Defense, requires a supplier to manufacture or distribute specialized shop maintenance trays. The contractor is responsible for providing 126 units annually of the specific maintenance tray identified by NSN 4940017023055 and Approved Part Number 715X901 to prime contractors fulfilling DLA supply contracts. The agreement falls under NAICS code 332322 and mandates strict compliance with the Buy American and Balance of Payments Program. Interested parties must submit their responses by the deadline of October 28, 2026.
Sheet Metal Work Manufacturing

POSTED

30 days ago

DEADLINE

in about 2 hours
View Details
NAICS: 336413
DIBBS
Supplier of Pneumatic Wheel AssembliesThis subcontract through the Department of Defense Strategic Acquisition Program Directorate requires a supplier to manufacture or distribute pneumatic tire wheel assemblies for prime contractors. The scope is specifically limited to NSN 2530016998219 and Approved Part Number 746X718, with a required annual delivery volume of 91 units. The selected provider must adhere to DLA quality requirements and maintain strict compliance with the Buy American and Balance of Payments Program. This opportunity falls under NAICS code 336413, with a response deadline set for October 28, 2026.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

30 days ago

DEADLINE

in about 2 hours
View Details
NAICS: 335999
DIBBS
WHEEL ASSEMBLY, PNEUMATIC TIRE
Solicitation # SPE7LX-26-R-0104
Solicitation SPE7LX-26-R-0104 is an unrestricted request for a Fixed-Price with Annual Price Adjustments, Indefinite Quantity Contract issued by the DLA Land and Maritime Strategic Acq Program Directorate. The contract supports Department of War items, including pneumatic tire wheel assemblies, battery chargers, power supplies, and solar cell panels, for both DLA Direct stock replenishment and Customer Direct delivery to locations within the United States and overseas. The agreement features a three-year base period with two one-year options, carrying a minimum value of 36,000.00 USD and a maximum ceiling of 26,000,000.00 USD over the five-year period. Offers are due by October 28, 2026. Award decisions will be based on a best-value determination, weighing price, past performance via the Supplier Performance Risk System, and proposed delivery capabilities. A critical requirement for offerors is the completion of a Capability Assessment Plan to evaluate surge and sustainment abilities for go-to-war resupply needs. Additionally, contractors must commit to a small business participation plan maintaining at least 3 percent of the annual awarded dollar value. Deliverables must adhere to strict packaging and marking standards, specifically ASTM D3951 and MIL-STD-129, with invoicing processed through the Wide Area WorkFlow system. Most items are shipped FOB Origin with First Destination Transportation, except for specific components requiring FOB Destination.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

30 days ago

DEADLINE

in about 2 hours
View Details
DIBBS
SUPPORT, STRUCTURAL
Solicitation # SPE7LX-26-R-0007
Solicitation SPE7LX-26-R-0007 is a sole source, firm-fixed price, long-term requirements contract issued by the DLA Land and Maritime Strategic Acquisition Program Directorate for structural support items. The contract is designed to consolidate 1,309 National Stock Numbers (NSNs) supplied solely by AM General to improve supply availability and reduce lead times. The procurement is structured into three distinct groups: commercial items under CLIN 0001 (FAR Part 12), non-commercial items under CLIN 0002 (FAR Part 15), and Depot-Level Reparable items under CLIN 0003. The total estimated value over the ten-year period of performance, which consists of a five-year base period and five one-year options, is approximately 609 million dollars. The contract mandates strict quality and compliance standards, including adherence to ISO 9001 or AS9100 inspection systems and MIL-STD-129 marking and MIL-STD-2073-1E packaging requirements. Contractors must comply with Cybersecurity Maturity Model Certification (CMMC) levels and NIST SP 800-171 assessments for handling controlled unclassified information. Award decisions are based on a best value determination, weighing price, past performance, and delivery. Additionally, the contract includes provisions for surge and sustainment capabilities, first article testing, and a structured process for adding sole source items to the contract scope over time. Invoicing and payment are processed electronically through the Wide Area WorkFlow (WAWF) system.

POSTED

7 months ago

DEADLINE

in about 1 month
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

NAICS: 541380
Closed
DIBBS
DLA-Compliant Packaging, Labeling, and Documentation Services
MEDICAL SUPPLY CHAIIN FSH

POSTED

3 months ago

CLOSED

3 months ago
View Details
NAICS: 541380
Closed
DIBBS
Quality Inspection and Conformance Testing
ASC SUPPLIER OPER OEM DIVISION

POSTED

3 months ago

CLOSED

3 months ago
View Details
NAICS: 541380
Closed
DIBBS
Hazardous Materials Labeling and Compliance
ASC SUPPLIER OPER AE AND AF DIV

POSTED

3 months ago

CLOSED

3 months ago
View Details
NAICS: 541380
Closed
DIBBS
Product Verification Testing (PVT) Sample Preparation and Coordination
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

3 months ago

CLOSED

2 months ago
View Details
NAICS: 541380
Closed
DIBBS
Mercury and Hazardous Substance Compliance Verification
DDSP NEW CUMBERLAND FACILITY

POSTED

3 months ago

CLOSED

2 months ago
View Details
NAICS: 541380
Closed
DIBBS
Packaging and Labeling Compliance Services for Government Shipment
LAND SUPPLY CHAIN

POSTED

3 months ago

CLOSED

2 months ago
View Details
NAICS: 541380
Closed
DIBBS
Radioactive Materials Notification & Labeling
MEDICAL SUPPLY CHAIIN FSH

POSTED

3 months ago

CLOSED

3 months ago
View Details
NAICS: 541380
Closed
DIBBS
Packaging, Labeling, and Hazard Communication Compliance
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

3 months ago

CLOSED

2 months ago
View Details
NAICS: 541380
Closed
DIBBS
Specialized Packaging and MIL-STD-2073 Compliance Services
ASC COMMODITIES DIVISION

POSTED

3 months ago

CLOSED

3 months ago
View Details
NAICS: 541380
Closed
DIBBS
Quality Testing & Certification Services
NUCLEAR REACTOR PROGRAM

POSTED

3 months ago

CLOSED

2 months ago
View Details
NAICS: 541380
Closed
DIBBS
Compliance & Quality Testing – Sampling and Inspection Services
ASC COMMODITIES DIVISION

POSTED

3 months ago

CLOSED

3 months ago
View Details
NAICS: 541380
DIBBS
Quality Assurance & Conformance Inspection Services
Defense Logistics Agency

POSTED

3 months ago

DEADLINE

N/A
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS