Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Non-Destructive Testing (NDT) and Quality Validation

Active

Federal

Response Deadline10/28/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves providing independent quality validation and non-destructive testing for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The scope of work includes performing dimensional inspections via CMM, material hardness testing, and surface finish analysis in strict accordance with TDP Rev C Gen 3 and MIL-STD-129. All services must be performed at Tinker AFB. To be eligible, the contractor must hold ISO 17025 or AS9100 certification and is responsible for delivering certified inspection reports. The opportunity is categorized under NAICS code 333242, with a response deadline set for October 28, 2026.

General Info

Quality validation and NDT services at Tinker AFB for DLA Weapons Support ASC.

Agency

Department Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

NAICS

333242 - Semiconductor Machinery Manufacturing

Place of Performance

TINKER AFB, OK, 73145-8000, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4A6-27-T-5642.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

BEARING, ROLLER, CYLINDR

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 20

subcontract

Response DeadlineOct 28

Submission deadline

Response Deadline

10/28/2026, 05:00:00 PM UTCin 6 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs independent quality validation and NDT for prime contractors on DLA Weapons Support ASC projects. Conducts dimensional inspection via CMM, material hardness testing, and surface finish analysis per TDP Rev C Gen 3 and MIL-STD-129. Requires ISO 17025 or AS9100 certification. Delivers certified inspection reports.

Similar Contracts

Same NAICS industry code

Manufacture of Worm Shaft Assembly (NSN 1290010449857)This subcontract involves the manufacture and supply of 16 Worm Shaft Assemblies (NSN 1290010449857) for prime contractors under the DLA Weapons Support Maritime Supply Chain. The fabrication process must strictly adhere to Drawing 19200 HA11A2013 (Rev OO, 11/01/2011), utilizing CNC machining, gear cutting, and precision grinding to ensure all specified tolerances and Quality Assurance Provisions are met. Deliverables must be packaged according to ASTM D3951 standards. The project is categorized under NAICS code 333242, with the place of performance located in New Cumberland, Pennsylvania. The response deadline for this requirement is November 2, 2026.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Hydrostatic Testing and Certification ServicesThis subcontract for Hydrostatic Testing and Certification Services supports prime contractors on Defense Logistics Agency supply contracts for the USS VIRGINIA SSN 774. The selected provider will perform hydrostatic pressure testing using calibrated rigs in strict accordance with contract drawing specifications to verify valve integrity. Key deliverables include the provision of certified hardware and the generation of signed hydrostatic test reports. The project requires the capability to handle ITAR-controlled hardware and falls under NAICS code 333242. Performance will take place at FPO 09590. Interested parties must adhere to the response deadline of November 2, 2026, to provide the necessary certification and testing services for the Department of Defense.

Defense Logistics Agency

POSTED

DEADLINE

Propulsion Shaft and Bearing OverhaulThis small business set-aside subcontract, managed by the Department of Homeland Security under agency CG-SEA-C22, involves the overhaul of propulsion shafts and bearings for US Coast Guard SFLC vessel projects. The scope of work includes the removal, inspection, alignment, and renewal of propulsion shafting, external water-lubricated propulsion bearings, stern tube bearings, and inflatable propulsion shaft seals. The contractor is responsible for ensuring all shaft coupling alignment checks are performed in strict accordance with MIL-STD-2191 and MIL-STD-2199A standards. The final deliverable consists of the successful installation and alignment of propulsion shafts and the renewal of all specified bearings. Responses for this opportunity are due by November 16, 2026.

POSTED

DEADLINE

Supply of Fan Clutch HubsThis subcontract involves the procurement and delivery of fan clutch hub hardware to support prime contractors for the Department of Defense, specifically under the DLA Weapons Support Land Supply Chain ESOC Buys. The selected provider is responsible for delivering the physical hubs to a designated shipping destination in Texarkana, Texas, while ensuring all components strictly adhere to the Berry Amendment and the Buy American Act. To qualify and maintain compliance, the contractor must meet NIST SP 800-171 standards for the protection of controlled unclassified information. Additionally, the provider is required to submit comprehensive manufacturer or OEM details, including specific brand and model numbers, to ensure the hardware meets all technical specifications.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Supply of Sleeve Bearings (NSN 3120-00-618-9953)This subcontract involves the manufacture and supply of six sleeve bearings, identified by NSN 3120-00-618-9953, for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The contractor is responsible for ensuring all units are produced in accordance with the DLA Master List of Technical and Quality Requirements. Delivery is specified as FOB Origin to DLA Distribution Cherry Point, North Carolina. Strict compliance with packaging and labeling standards is required, specifically ASTM D3951 for packaging and MIL-STD-129 and RP001 for marking. Additionally, the contractor must provide Hazard Warning Labels and Material Safety Data Sheets as mandated by 29 CFR 1910.1200 where applicable. The procurement falls under NAICS code 333242.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supply of Grip Spacing Gage (P/N T101559)This subcontract involves the supply of one Grip Spacing Gage, part number T101559, for prime contractors under a Defense Logistics Agency contract. The item must meet NSN 5220001823779 specifications and be sourced or manufactured from approved providers, specifically Rotair Aerospace Corp or Bell Textron Inc. Production requires the use of precision machining equipment to ensure adherence to strict aerospace precision standards. The contract mandates full compliance with the Buy American Act and DFARS cybersecurity requirements. Performance of the contract will take place in Corpus Christi, Texas. The solicitation was posted on October 19, 2026, with a response deadline set for October 30, 2026.

Defense Logistics Agency

POSTED

DEADLINE

Precision Optical/Electronic Component SupplyThis subcontract, titled Precision Optical/Electronic Component Supply, involves the provision of high-precision lenses, sensors, and housings to prime contractors supporting DLA supply contracts. Managed by the Department of Defense through SPRMM1 DLA Mechanicsburg under NAICS code 333242, the agreement focuses on the delivery of certified sub-components and high-grade optical glass. A critical requirement of the contract is the strict adherence to DLA CDAP guidelines to prevent the use of counterfeit parts. To ensure compliance, the supplier must provide full traceability documentation for all electronic sensors and materials, specifically including manufacturer batch and lot codes. The solicitation was posted on October 19, 2026, with a response deadline of November 6, 2026.

SPRMM1 DLA Mechanicsburg

POSTED

DEADLINE

Supply of Sleeve and Bearing Assemblies (NSN 2520-00-737-6156)This subcontract with the Department of Defense DLA Weapons Support Land Supply Chain requires the procurement of 488 Sleeve and Bearing Assemblies under NSN 2520-00-737-6156. The selected provider is responsible for manufacturing or sourcing the assemblies while ensuring all items strictly adhere to the established NSN technical specifications. Key operational requirements include the preservation of bare metal surfaces to prevent corrosion and the lubrication of all moving parts. To ensure product integrity during transit, each assembly must be individually packaged to immobilize components. The final deliverable consists of 488 preserved and individually packaged units.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Manufacturing and Supply of Vehicular Seat Supports (Rear Seat, Left Hand)This subcontract involves the manufacturing and supply of 139 rear seat left hand vehicular seat support top assemblies for the Department of Defense, specifically supporting DLA Weapons Support. The production must strictly adhere to Basic Drawing 19207 12339047, Rev C, and all units must be palletized according to RP001 standards. The contractor is required to ensure full compliance with DFARS 252.225-7001 Buy American standards before delivering the completed assemblies to the government. Performance for this contract is based in Texarkana, Texas, under NAICS code 333242.

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

T_IME_23_FY26I - Provision of One (1) Unit of Physical Vapor Deposition (PVD) Cluster tool(s) for Through Silicon Via (TSV) Barrier-Seed layers, Redistribution Layer (RDL) Barrier-Seed layers and Optional Aluminum (Al) deposition on 200mm wafers

Solicitation # Doc2441528264

A*STAR Research Entities is seeking sources for the provision of one Physical Vapor Deposition PVD Cluster tool designed for 200mm wafers. The equipment must be capable of handling Through Silicon Via TSV Barrier-Seed layers and Redistribution Layer RDL Barrier-Seed layers, with an additional requirement for optional Aluminum deposition. This sources-sought solicitation, identified by number Doc2441528264, was posted on October 16, 2026. Interested parties must submit their responses by the deadline of October 30, 2026.

A*STAR Research Entities

POSTED

DEADLINE

Supply of Critical Safety Item (CSI) Inner Gland BearingThis subcontract, managed by the Department of the Navy's Navsup Weapon Systems Support Mech, involves the procurement of one Inner Gland Bearing (NIN: 016473493) for prime contractors working on Portsmouth Naval Shipyard projects. The selected provider must manufacture or source the bearing to exact technical specifications, ensuring it meets the standards of a Critical Safety Item. Performance is based out of Mechanicsburg, Pennsylvania, under NAICS code 333242. The contract mandates strict adherence to FAR 52.246-11 Higher-Level Contract Quality Requirements and requires the delivery of a complete Level I Scope of Certification documentation package. Additionally, the contractor must possess a PKI Digital Certificate on a CAC to facilitate necessary ECDS data submissions. Final delivery consists of the physical bearing accompanied by all required certification paperwork.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Magnetic Particle Inspection and Production Lot TestingThis subcontract involves providing non-destructive testing and production lot validation for critical valve components supporting DLA Weapons Support Maritime Hardware projects. The scope of work specifically requires the execution of magnetic particle inspection in accordance with ASTM E 1444 and the completion of production lot testing for 39 units. To qualify, the contractor must maintain a quality system compliant with ISO 9001 or SAE AS9003 and employ inspectors certified to ASTM E 1444 standards. The final deliverables consist of certified inspection results and detailed production lot test reports. Performance will take place in Cherry Point, North Carolina, under the oversight of the Department of Defense.

CHERRY POINT PHANTOM RD BLDG

POSTED

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

Same awarding agency

MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services supports prime contractors on DLA Weapons Support ASC projects within the Department of Defense. The scope of work involves performing specialized military-grade packaging and marking for small hardware components, strictly adhering to MIL-STD-2073-1E, MIL-STD-129, and RP001 DLA Packaging Requirements. Technical execution requires the use of specific methods including QUP :001, PRES MTHD :10, and CLNG/DRY :1, as well as a professional knowledge of ANSI X12 unit of issue protocols to ensure shipments are fully prepared for CONUS transport. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 493110. Interested parties must note the response deadline of October 29, 2026. The contract is managed through the DLA Weapons Support ASC Commodities Division and focuses on delivering ready-to-ship, compliant military packaging solutions.

General Warehousing and Storage

POSTED

DEADLINE

Manufacturer of Zinc-Coated Swaging Sleeves (NSN 4030-00-431-5537)This subcontract, issued by the Department of Defense DLA Weapons Support ASC Commodities Division, requires the manufacture and delivery of 680,000 precision-manufactured wire rope swaging sleeves under NSN 4030-00-431-5537. The components must be produced according to SAE AMS-C-81562, Type I, Class 6 standards and feature a zinc coating compliant with ASTM B633 Type I, FE/ZN5. This opportunity is designated as a Total Small Business Set-Aside under NAICS code 332510. Strict regulatory and security compliance is mandatory for this project, including adherence to ITAR, EAR, and the US/Canada Joint Certification Program. Additionally, the contractor must meet CMMC Level 2 cybersecurity standards to ensure the protection of sensitive information. The response deadline for this requirement is October 29, 2026.

Hardware Manufacturing

POSTED

DEADLINE

BEARING, ROLLER, TRACK R

Solicitation # SPE4A6-27-T-6096

Ball and Roller Bearing Manufacturing

POSTED

DEADLINE

Solicitation # SPE4A6-27-T-5992

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

DEADLINE

WIRING HARNESS, BRANCHE

Solicitation # SPE4A6-27-T-6171

Power, Distribution, and Specialty Transformer Manufacturing

POSTED

DEADLINE

Solicitation # SPE4A6-27-T-5961

Precision Turned Product Manufacturing

POSTED

DEADLINE

Solicitation # SPE4A6-27-T-5951

Hardware Manufacturing

POSTED

DEADLINE

WASHER, SHOULDERED

Solicitation # SPE4A6-27-T-6016

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

DEADLINE

NOZZLE ASSEMBLY

Solicitation # SPE4A6-27-T-5985

Turbine and Turbine Generator Set Units Manufacturing

POSTED

DEADLINE

CABLE ASSEMBLY, RADIO F

Solicitation # SPE4A6-27-T-5857

Other Electronic Component Manufacturing

POSTED

DEADLINE

Solicitation # SPE4A6-27-T-5815

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

DEADLINE

SCREW, CAP, SOCKET HEAD

Solicitation # SPE4A6-27-T-6147

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS