Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Non-Destructive Testing (NDT) Services

Active

Federal

Response Deadline11/04/2026, 04:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for Non-Destructive Testing services supports U.S. Coast Guard vessel projects under the Department of Homeland Security. The selected provider will perform critical material integrity assessments for prime contractors, specifically focusing on ultrasonic thickness measurements and side-scan testing of hull plating. The primary objective is to ensure structural soundness through the delivery of detailed NDT inspection reports and precise thickness measurement data. The work is designated for performance in San Francisco and falls under NAICS code 541380. Interested parties must note the response deadline of November 4, 2026, for this opportunity managed by the CG-SEA-C21 agency office.

General Info

NDT services for US Coast Guard vessel hull inspections in San Francisco by 2026.

Agency

Department Of Homeland Security → CG-SEA-C21

NAICS

541380 - Testing Laboratories and Services

Place of Performance

San Francisco, CA, USA

Set-Aside

NONE

Documents

This scope was carved out of 70ZU0127QPBPLTERN.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

USCGC TERN DRYDOCK REPAIRS

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 15

subcontract

Response DeadlineNov 4

Submission deadline

Response Deadline

11/04/2026, 04:00:00 PM UTCin 20 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Homeland Security → CG-SEA-C21

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Homeland Security → CG-SEA-C21

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs ultrasonic and side-scan testing for prime contractors on U.S. Coast Guard vessel projects. Conducts hull plating side-scan testing and ultrasonic thickness measurements to determine material integrity. Delivers NDT inspection reports and thickness measurement data.

Similar Contracts

Same NAICS industry code

First Article Testing for Aircraft Universal JointsThis subcontract involves performing First Article Testing for aircraft universal joints on behalf of prime contractors for the DLA Weapons Support ASC Commodities Division. The scope of work requires the validation of one unit against Basic Drawing NR 98897 4C95010, utilizing certified Measuring and Test Equipment in accordance with requirement RT001. Due to the nature of the technical data involved, strict adherence to ITAR and EAR compliance is mandatory. The final deliverables include the tested unit and a comprehensive FAT validation report, both of which must be delivered to Robins AFB in Georgia. This project falls under NAICS code 541380 and is managed by the Department of Defense.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

Joliet Job Corps-Request for Quote Asbestos Testing & Abatement

Solicitation # Joliet JCC Asbestos Testing & Abatement

Management & Training Corporation is seeking quotes for a fee-for-service subcontract to provide asbestos testing and abatement services at the Joliet Job Corps center in Joliet, Illinois. The scope of work includes sampling and laboratory analysis of ceiling tiles in the Administration Academic Building and Welcome Center, as well as testing and potential removal of asbestos-containing material floor tiles in the warehouse and storage areas, totaling approximately 3,600 square feet. All activities must be performed by licensed professionals using accredited laboratories and must comply with federal, State of Illinois, OSHA, and EPA regulations. Key deliverables include a sampling plan, waste shipment records, disposal manifests, and a final project completion report. This opportunity is set aside for small businesses, including VOSB, SDVOSB, WOSB, and HUBZone certified firms, under NAICS code 541380. Interested bidders must submit a bid sheet, a completed supplier packet containing a W-9 and self-certification, proof of insurance, and three references for similar projects by October 21, 2026. Award will be based on best value as determined by MTC. The contract is subject to Service Contract Labor Standards, specifically Wage Determination No. 2015-5019 Rev. 31, and includes various FAR clauses regarding equal opportunity, minimum wages, and the protection of sensitive government information. Invoicing is to be submitted on a weekly or bi-weekly basis.

Joliet Job Corps

POSTED

about 5 hours ago

DEADLINE

Electrical Overload and Load Bank TestingThis subcontract opportunity involves performing electrical overload and load bank testing for prime contractors working on Clayton County Water Authority facility projects. The scope of work includes conducting primary and secondary current injection testing and load bank testing to verify protective relay trip curves and timing. The selected provider must deliver detailed overload test reports and trip timing data to ensure system reliability. Qualified candidates must employ NETA certified technicians or Professional Engineers to execute the technical requirements. Interested parties should note that the response deadline is November 12, 2026, and the project falls under NAICS code 541380.

Clayton County Water Authority

POSTED

about 6 hours ago

DEADLINE

First Article Testing and Quality Assurance ServicesThis subcontract for First Article Testing and Quality Assurance Services supports prime contractors on Navsup Weapon Systems Support Mech projects within the Department of Defense. The scope of work involves performing both destructive and non-destructive testing, specifically conducting First Article Test and Inspection on a single unit. These activities must adhere to IRPOD requirements and TDP Version O06, utilizing specialized equipment such as hardness testers and Coordinate Measuring Machines to ensure full compliance with MIL-I-45208 standards. Administrative requirements include the submission of all reports through the Wide Area Workflow system. The final deliverables consist of a comprehensive First Article Inspection Report and the necessary approval documentation as specified by DD Form 1423. This effort falls under NAICS code 541380, with a response deadline set for November 16, 2026.

Navsup Weapon Systems Support Mech

POSTED

about 9 hours ago

DEADLINE

in about 1 month

Third-Party Inspection and Testing for Naval Vent AssembliesThis subcontract involves providing independent third-party testing and inspection services for Naval Vent Assemblies supporting Navsup Weapon Systems Support Mech projects. The selected contractor will be responsible for conducting dimensional inspections and non-destructive testing in strict accordance with Source Testing Requirements. Key operational requirements include the use of precision measurement tools and the capacity to handle Unclassified Naval Nuclear Propulsion Information. The contractor is required to deliver certified Reports of Test and Inspection through the Wide Area Workflow system. This opportunity falls under NAICS code 541380 and is managed by the Department of Defense. Interested parties must submit their responses by the deadline of November 16, 2026.

Navsup Weapon Systems Support Mech

POSTED

about 9 hours ago

DEADLINE

in about 1 month

Insulated Hot Line Tool Testing and CertificationThis subcontract for Insulated Hot Line Tool Testing and Certification involves performing annual inspections and dielectric verification of insulated electrical tools for prime contractors working on DLA Distribution facility projects. The scope of work includes the inspection and testing of up to 15 assorted hot line tools, such as insulated chains and hot sticks, to ensure insulating properties are maintained across the entire working length in accordance with OSHA 29 CFR 1926.957. The project requires the use of calibrated high-voltage testing equipment and must be executed by certified technicians. Upon completion of the testing, the contractor is responsible for delivering formal certification and detailed test reports. This opportunity is categorized under NAICS code 541380 and is associated with the Department of Defense.

DLA Distribution

POSTED

about 9 hours ago

DEADLINE

Material Characterization and Metallurgical TestingThis 8(a) sole source subcontract, titled Material Characterization and Metallurgical Testing, supports prime contractors on projects for the NASA Shared Services Center. The scope of work involves performing both destructive and non-destructive testing on process characterization samples and witness coupons. Key technical activities include metallography, mechanical testing, and thermophysical testing, utilizing specialized equipment for polishing, etching, and tensile and hardness measurements. All work must be conducted in strict adherence to NASA material property testing specifications, culminating in the delivery of detailed test reports and results. The contract falls under NAICS code 541380 and was posted on October 15, 2026, with a response deadline of October 20, 2026.

NASA Shared Services Center

POSTED

about 9 hours ago

DEADLINE

Precision Metrology and Laser Scanning ServicesThis 8(a) sole source subcontract, titled Precision Metrology and Laser Scanning Services, supports prime contractors on projects for the NASA Shared Services Center. The scope of work involves performing final hardware inspections and geometric verification using high-precision large-scale laser scanners. The primary objective is to compare completed chamber data against original CAD geometry to ensure strict adherence to NASA-approved standards. The selected provider is responsible for delivering comprehensive inspection reports and the associated scan data. This specialized technical service falls under NAICS code 541380, focusing on high-accuracy metrology to verify the structural integrity and dimensional accuracy of critical aerospace hardware.

NASA Shared Services Center

POSTED

about 9 hours ago

DEADLINE

First Article Testing and Certification for Military FastenersThis subcontract for First Article Testing and Certification for Military Fasteners supports Navsup Weapon Systems Support Mech projects. The selected provider will perform independent laboratory testing to verify that the dimensions and metallurgical properties of plain hexagon nuts comply with IRPOD and TDP Version No. 002. All work must be conducted using certified materials testing and metrology equipment. To be eligible, the contractor must maintain ISO/IEC 17025 accreditation. Required deliverables include certified Test Reports and Reports of Test and Inspection, which must be submitted through the Wide Area Workflow system. The solicitation was posted on October 15, 2026, with a response deadline of November 16, 2026.

Navsup Weapon Systems Support Mech

POSTED

about 9 hours ago

DEADLINE

in about 1 month

Precision Flowmeter Calibration ServicesThis subcontract, titled Precision Flowmeter Calibration Services, is a Small Business Set Aside under NAICS code 541380 for the NASA Shared Services Center. The project requires specialized Reynolds number calibration for six flowmeters, specifically Part number 90-88669-610, to support prime contractors on aerospace projects. The technical scope involves executing calibrations in air at 293 PSIA across 10 points ranging from 31 to 206 SCFM, utilizing equipment maintained at 14.7 PSIA and 60 degrees Fahrenheit. The selected provider must ensure all work complies with ECCN EAR99 regulations and deliver the calibrated flowmeters along with the necessary certifications. The solicitation was posted on October 15, 2026, with a response deadline of October 22, 2026.

NASA Shared Services Center

POSTED

about 9 hours ago

DEADLINE

FLOWMETER, CALIBRATION, AND SIGNAL CONDITIONERS NEEDED FOR PANEL MODIFICATION FOR ESR

Solicitation # 80NSSC26946800Q

Solicitation 80NSSC26946800Q is a small business set-aside request for quotation issued by the NASA Shared Services Center to procure specialized flowmeters, calibration services, and signal conditioners. The primary objectives are to re-establish the Orion scrubber purge capability at the Multi-payload Processing Facility and integrate redundant flowmeters into the Cabin Air Supply Panel for real-time data delivery to the firing room. The required hardware includes six turbine flowmeters (Part FT-08AER1-GEA-1) and signal conditioners (Part TWA-A-9-00-IS), with specific calibration requirements performed in air at 293 PSIA. Performance will take place at the Vehicle Assembly Building on the Mobile Launcher and the Multi-payload Processing Facility. The contract is a firm-fixed-price commercial item procurement governed by FAR 52.212-4. Award will be granted based on the lowest price technically acceptable (LPTA) criteria, requiring offerors to demonstrate full technical compliance with all solicitation requirements. Key administrative details include a delivery term of FOB Destination and a requirement for offerors to be registered in the System for Award Management. The procurement is subject to strict export control regulations, specifically ECCN EAR99, and requires compliance with ITAR and EAR. Quotes must be submitted to McKenzie Hanson by October 22, 2026, and must remain valid for 30 days.

NASA Shared Services Center

POSTED

about 9 hours ago

DEADLINE

Chemical Nutrient Analysis Service for Combat Feeding Division (CFD)

Solicitation # W911QY-26-R-NUTRIENT-ANALYSIS

The U.S. Army Contracting Command-Aberdeen Proving Ground, supporting the Combat Feeding Division of the DEVCOM Soldier Center, is soliciting a single-award, Firm Fixed Price, Indefinite Delivery Indefinite Quantity (IDIQ) contract for chemical nutrient analysis services. The contractor will provide laboratory testing for food ingredients and ration components, with a primary focus on selenium, vitamin B12, and total dietary fiber, though the ability to analyze a wide range of other analytes is required. The contract has a minimum guarantee of $5,000 and a total ceiling of $25,000, with an estimated minimum requirement of 25 samples. The anticipated period of performance is from November 1, 2026, to October 31, 2027. To be eligible, offerors must maintain active ISO/IEC 17025 accreditation and utilize validated, industry-standard methods such as AOAC International, USP, or AACC. The contractor must possess in-house capacity and cannot act as a pass-through to other laboratories. Key requirements include maintaining a documented chain of custody, storing samples under government-specified conditions, and retaining samples for 30 days post-reporting. Results must be delivered within 14 calendar days of sample receipt. Award will be made based on the Lowest Price Technically Acceptable (LPTA) criteria, evaluating technical capability, price, and past performance. This is a full and open competition under NAICS code 541380, with proposals due by 12:00 p.m. EST on October 29, 2026.

W6QK Acc-Apg Natick

POSTED

about 9 hours ago

DEADLINE

More opportunities from Department Of Homeland Security → CG-SEA-C21

Same awarding agency

MDE OEM Parts Kit (QL3) SupplyThis subcontract, managed by the Department of Homeland Security under agency CG-SEA-C21, involves the supply of genuine OEM parts kits for the USCGC HAROLD MILLER. The scope of work requires the provision of all gaskets, filters, seals, and internal engine components specifically required for the 8,000-hour QL3 maintenance kit. All specified components must be delivered to the vessel facility located in Saint Petersburg, Florida. The opportunity was posted on October 15, 2026, with a response deadline of November 4, 2026, and is categorized under NAICS code 423840.

Industrial Supplies Merchant Wholesalers

POSTED

about 9 hours ago

DEADLINE

Main Diesel Engine 8,000-Hour Maintenance (QL3)This subcontract involves performing specialized mechanical overhaul and preventative maintenance for the USCGC Harold Miller under the Department of Homeland Security. The primary objective is the execution of the QL3 maintenance protocol for Main Diesel Engines, which encompasses the comprehensive inspection, servicing, and repair of engine components to ensure they are delivered in fully operational condition. The work will be performed in Saint Petersburg, Florida, and requires the use of OEM-specified replacement parts and specialized diesel engine diagnostic tooling. To ensure technical compliance, all technicians assigned to the project must hold certifications specific to the Main Diesel Engine model being serviced.

Ship Building and Repairing

POSTED

about 9 hours ago

DEADLINE

Rudder and Steering SystemsThis subcontract opportunity, titled Rudder and Steering Systems, involves the renewal of rudder assemblies for prime contractors working on U.S. Coast Guard vessel projects. The scope of work requires the removal and renewal of existing assemblies to ensure the delivery of fully installed and operational rudder systems. The project is managed under the Department of Homeland Security through agency CG-SEA-C21 and falls under NAICS code 336611. Performance for this contract will take place in San Francisco. Interested parties must note that the solicitation was posted on October 15, 2026, with a response deadline set for November 4, 2026, at 4:00 PM.

Ship Building and Repairing

POSTED

about 9 hours ago

DEADLINE

Marine Piping and Valve SpecialistThe Marine Piping and Valve Specialist subcontract involves providing critical maintenance and repair services for sea water systems and specialized skin valves on U.S. Coast Guard vessel projects. Working under prime contractors, the selected provider will be responsible for the inspection and repair of speed log skin valves and the overall maintenance of sea water systems to ensure operational readiness. This opportunity is managed by the Department of Homeland Security under agency CG-SEA-C21, with performance taking place in San Francisco. The solicitation was posted on October 15, 2026, and requires a response by November 4, 2026. The work falls under NAICS code 238220, focusing on the delivery of fully maintained systems and repaired valve components.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

about 9 hours ago

DEADLINE

Marine HVAC and VentilationThis subcontract opportunity, titled Marine HVAC and Ventilation, involves providing specialized cleaning and inspection services for ventilation and HVAC systems on U.S. Coast Guard vessel projects. Working under prime contractors, the selected provider will be responsible for the maintenance of engine room supply and exhaust fan assemblies as well as HVAC system ducting to ensure all components are properly cleaned and inspected. The project is managed by the Department of Homeland Security under agency CG-SEA-C21 and will be performed in San Francisco. Interested parties must submit their responses by November 4, 2026, in accordance with NAICS code 238220.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

about 9 hours ago

DEADLINE

Marine Electrical and ElectronicsThis subcontract for Marine Electrical and Electronics supports U.S. Coast Guard vessel projects through the Department of Homeland Security. The selected provider will work under prime contractors to perform critical electrical inspections and the renewal of electronic navigation equipment. Key technical requirements include conducting thermographic inspections of electrical power distribution systems and renewing Capastic Fairing Depth Sounders and Fathometer Transducers. The scope of work culminates in the delivery of detailed thermographic reports and the restoration of fully operational transducers and sounders. Performance will take place in San Francisco under NAICS code 238210. The solicitation was posted on October 15, 2026, with a response deadline of November 4, 2026.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

about 9 hours ago

DEADLINE

Diesel Engine Maintenance (W-5 Level)This subcontract, titled Diesel Engine Maintenance (W-5 Level), involves providing high-level maintenance and control system updates for prime contractors supporting U.S. Coast Guard vessel projects. The scope of work focuses on the execution of main diesel engine assembly W-5 maintenance and the updating of control system configurations to deliver fully serviced and updated engines. Managed by the Department of Homeland Security under agency CG-SEA-C21, the work is designated under NAICS code 336611 and will be performed in San Francisco. The solicitation was posted on October 15, 2026, with a response deadline set for November 4, 2026.

Ship Building and Repairing

POSTED

about 9 hours ago

DEADLINE

Marine Propulsion and Shafting SpecialistThis subcontract opportunity, titled Marine Propulsion and Shafting Specialist, is issued by the Department of Homeland Security for the CG-SEA-C21 agency. The project focuses on the renewal and realignment of critical propulsion system components for U.S. Coast Guard vessel projects. Specifically, the scope of work includes renewing propellers, propulsion shafts, bearing carriers, and intermediate and aft water-lubricated propulsion shaft bearings, as well as performing the realignment of the main engine and reduction gear. The selected contractor will be responsible for delivering fully installed and aligned propulsion shafts, bearings, and propellers. Performance of the contract will take place in San Francisco. Interested parties must submit their responses by the deadline of November 4, 2026, for this requirement categorized under NAICS code 335131.

Residential Electric Lighting Fixture Manufacturing

POSTED

about 9 hours ago

DEADLINE

Tank Cleaning and Environmental ServicesThis subcontract for Tank Cleaning and Environmental Services supports U.S. Coast Guard vessel projects through the Department of Homeland Security. The scope of work involves the cleaning and inspection of various holding and fuel tanks, specifically targeting dirty oil, oily water, MP fuel service, grey water, and sewage tanks. Additionally, the contractor is responsible for flushing all associated grey water and sewage piping systems to deliver certified clean and inspected results to prime contractors. The project is based in San Francisco and falls under NAICS code 562910. Interested parties must note that the response deadline for this opportunity is November 4, 2026, with the solicitation having been posted on October 15, 2026.

Remediation Services

POSTED

about 9 hours ago

DEADLINE

Marine Painting and PreservationThis subcontract for Marine Painting and Preservation involves providing surface preparation and protective coating services for U.S. Coast Guard vessel projects under the Department of Homeland Security. The scope of work requires 100% preservation of critical areas, including the underwater body, hull plating freeboard, exterior main decks, superstructure, mast, and stern tube interior surfaces, to deliver a fully preserved and coated vessel. The project will be performed in San Francisco under NAICS code 238120. Interested parties must submit their responses by November 4, 2026, for this opportunity managed by the CG-SEA-C21 agency office.

Structural Steel and Precast Concrete Contractors

POSTED

about 9 hours ago

DEADLINE

Drydock and Facility ServicesThis subcontract for Drydock and Facility Services, managed by the Department of Homeland Security under agency CG-SEA-C21, involves providing essential drydocking facilities and temporary shoreside services for prime contractors working on U.S. Coast Guard vessel projects. The scope of work focuses on the safe drydocking and undocking of vessels, as well as the provision of critical temporary utilities, including power and water services. The project will be performed in San Francisco and falls under NAICS code 336611. Interested parties should note that the opportunity was posted on October 15, 2026, with a response deadline set for November 4, 2026.

Ship Building and Repairing

POSTED

about 9 hours ago

DEADLINE

Specialized Marine Hardware and FabricationThis subcontract, titled Specialized Marine Hardware and Fabrication, supports prime contractors on U.S. Coast Guard vessel projects through the maintenance and renewal of specialized hull hardware and closures. The scope of work includes assessing watertight closures, as well as the removal, inspection, and reinstallation of stern launch doors. Additionally, the contractor is responsible for renewing cathodic protection and delivering new zinc anodes and certified watertight closures. Managed by the Department of Homeland Security under agency CG-SEA-C21, the work will be performed in San Francisco. The opportunity was posted on October 15, 2026, with a response deadline of November 4, 2026. The project falls under NAICS code 332999.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 9 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS