Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Precision Metrology and Laser Scanning Services

Active

Federal

Response Deadline10/20/2026, 08:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This 8(a) sole source subcontract, titled Precision Metrology and Laser Scanning Services, supports prime contractors on projects for the NASA Shared Services Center. The scope of work involves performing final hardware inspections and geometric verification using high-precision large-scale laser scanners. The primary objective is to compare completed chamber data against original CAD geometry to ensure strict adherence to NASA-approved standards. The selected provider is responsible for delivering comprehensive inspection reports and the associated scan data. This specialized technical service falls under NAICS code 541380, focusing on high-accuracy metrology to verify the structural integrity and dimensional accuracy of critical aerospace hardware.

General Info

8(a) subcontract for high-precision laser scanning and hardware inspection for NASA projects.

Agency

National Aeronautics And Space Administration → NASA Shared Services Center

NAICS

541380 - Testing Laboratories and Services

Place of Performance

MS, USA

Set-Aside

8A

Documents

This scope was carved out of 80NSSC26947003Q.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

NASA HR-1 Demonstrator Chamber and Qualification Samples

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 15

subcontract

Response DeadlineOct 20

Submission deadline

Response Deadline

10/20/2026, 08:00:00 PM UTCin 5 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyNational Aeronautics And Space Administration → NASA Shared Services Center

ContactsNo contacts available

OfficeN/A

Organization / AgencyNational Aeronautics And Space Administration → NASA Shared Services Center

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs final hardware inspection and geometric verification for prime contractors on NASA Shared Services Center projects. Utilizes high-precision large-scale laser scanners to compare completed chamber data against original CAD geometry. Generates detailed inspection reports per NASA-approved standards. Delivers final inspection reports and scan data.

Similar Contracts

Same NAICS industry code

First Article Testing for Aircraft Universal JointsThis subcontract involves performing First Article Testing for aircraft universal joints on behalf of prime contractors for the DLA Weapons Support ASC Commodities Division. The scope of work requires the validation of one unit against Basic Drawing NR 98897 4C95010, utilizing certified Measuring and Test Equipment in accordance with requirement RT001. Due to the nature of the technical data involved, strict adherence to ITAR and EAR compliance is mandatory. The final deliverables include the tested unit and a comprehensive FAT validation report, both of which must be delivered to Robins AFB in Georgia. This project falls under NAICS code 541380 and is managed by the Department of Defense.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

Joliet Job Corps-Request for Quote Asbestos Testing & Abatement

Solicitation # Joliet JCC Asbestos Testing & Abatement

Management & Training Corporation is seeking quotes for a fee-for-service subcontract to provide asbestos testing and abatement services at the Joliet Job Corps center in Joliet, Illinois. The scope of work includes sampling and laboratory analysis of ceiling tiles in the Administration Academic Building and Welcome Center, as well as testing and potential removal of asbestos-containing material floor tiles in the warehouse and storage areas, totaling approximately 3,600 square feet. All activities must be performed by licensed professionals using accredited laboratories and must comply with federal, State of Illinois, OSHA, and EPA regulations. Key deliverables include a sampling plan, waste shipment records, disposal manifests, and a final project completion report. This opportunity is set aside for small businesses, including VOSB, SDVOSB, WOSB, and HUBZone certified firms, under NAICS code 541380. Interested bidders must submit a bid sheet, a completed supplier packet containing a W-9 and self-certification, proof of insurance, and three references for similar projects by October 21, 2026. Award will be based on best value as determined by MTC. The contract is subject to Service Contract Labor Standards, specifically Wage Determination No. 2015-5019 Rev. 31, and includes various FAR clauses regarding equal opportunity, minimum wages, and the protection of sensitive government information. Invoicing is to be submitted on a weekly or bi-weekly basis.

Joliet Job Corps

POSTED

about 4 hours ago

DEADLINE

Electrical Overload and Load Bank TestingThis subcontract opportunity involves performing electrical overload and load bank testing for prime contractors working on Clayton County Water Authority facility projects. The scope of work includes conducting primary and secondary current injection testing and load bank testing to verify protective relay trip curves and timing. The selected provider must deliver detailed overload test reports and trip timing data to ensure system reliability. Qualified candidates must employ NETA certified technicians or Professional Engineers to execute the technical requirements. Interested parties should note that the response deadline is November 12, 2026, and the project falls under NAICS code 541380.

Clayton County Water Authority

POSTED

about 5 hours ago

DEADLINE

Non-Destructive Testing (NDT) ServicesThis subcontract for Non-Destructive Testing services supports U.S. Coast Guard vessel projects under the Department of Homeland Security. The selected provider will perform critical material integrity assessments for prime contractors, specifically focusing on ultrasonic thickness measurements and side-scan testing of hull plating. The primary objective is to ensure structural soundness through the delivery of detailed NDT inspection reports and precise thickness measurement data. The work is designated for performance in San Francisco and falls under NAICS code 541380. Interested parties must note the response deadline of November 4, 2026, for this opportunity managed by the CG-SEA-C21 agency office.

POSTED

about 8 hours ago

DEADLINE

First Article Testing and Quality Assurance ServicesThis subcontract for First Article Testing and Quality Assurance Services supports prime contractors on Navsup Weapon Systems Support Mech projects within the Department of Defense. The scope of work involves performing both destructive and non-destructive testing, specifically conducting First Article Test and Inspection on a single unit. These activities must adhere to IRPOD requirements and TDP Version O06, utilizing specialized equipment such as hardness testers and Coordinate Measuring Machines to ensure full compliance with MIL-I-45208 standards. Administrative requirements include the submission of all reports through the Wide Area Workflow system. The final deliverables consist of a comprehensive First Article Inspection Report and the necessary approval documentation as specified by DD Form 1423. This effort falls under NAICS code 541380, with a response deadline set for November 16, 2026.

Navsup Weapon Systems Support Mech

POSTED

about 8 hours ago

DEADLINE

in about 1 month

Third-Party Inspection and Testing for Naval Vent AssembliesThis subcontract involves providing independent third-party testing and inspection services for Naval Vent Assemblies supporting Navsup Weapon Systems Support Mech projects. The selected contractor will be responsible for conducting dimensional inspections and non-destructive testing in strict accordance with Source Testing Requirements. Key operational requirements include the use of precision measurement tools and the capacity to handle Unclassified Naval Nuclear Propulsion Information. The contractor is required to deliver certified Reports of Test and Inspection through the Wide Area Workflow system. This opportunity falls under NAICS code 541380 and is managed by the Department of Defense. Interested parties must submit their responses by the deadline of November 16, 2026.

Navsup Weapon Systems Support Mech

POSTED

about 8 hours ago

DEADLINE

in about 1 month

Insulated Hot Line Tool Testing and CertificationThis subcontract for Insulated Hot Line Tool Testing and Certification involves performing annual inspections and dielectric verification of insulated electrical tools for prime contractors working on DLA Distribution facility projects. The scope of work includes the inspection and testing of up to 15 assorted hot line tools, such as insulated chains and hot sticks, to ensure insulating properties are maintained across the entire working length in accordance with OSHA 29 CFR 1926.957. The project requires the use of calibrated high-voltage testing equipment and must be executed by certified technicians. Upon completion of the testing, the contractor is responsible for delivering formal certification and detailed test reports. This opportunity is categorized under NAICS code 541380 and is associated with the Department of Defense.

DLA Distribution

POSTED

about 8 hours ago

DEADLINE

Material Characterization and Metallurgical TestingThis 8(a) sole source subcontract, titled Material Characterization and Metallurgical Testing, supports prime contractors on projects for the NASA Shared Services Center. The scope of work involves performing both destructive and non-destructive testing on process characterization samples and witness coupons. Key technical activities include metallography, mechanical testing, and thermophysical testing, utilizing specialized equipment for polishing, etching, and tensile and hardness measurements. All work must be conducted in strict adherence to NASA material property testing specifications, culminating in the delivery of detailed test reports and results. The contract falls under NAICS code 541380 and was posted on October 15, 2026, with a response deadline of October 20, 2026.

NASA Shared Services Center

POSTED

about 8 hours ago

DEADLINE

First Article Testing and Certification for Military FastenersThis subcontract for First Article Testing and Certification for Military Fasteners supports Navsup Weapon Systems Support Mech projects. The selected provider will perform independent laboratory testing to verify that the dimensions and metallurgical properties of plain hexagon nuts comply with IRPOD and TDP Version No. 002. All work must be conducted using certified materials testing and metrology equipment. To be eligible, the contractor must maintain ISO/IEC 17025 accreditation. Required deliverables include certified Test Reports and Reports of Test and Inspection, which must be submitted through the Wide Area Workflow system. The solicitation was posted on October 15, 2026, with a response deadline of November 16, 2026.

Navsup Weapon Systems Support Mech

POSTED

about 8 hours ago

DEADLINE

in about 1 month

Precision Flowmeter Calibration ServicesThis subcontract, titled Precision Flowmeter Calibration Services, is a Small Business Set Aside under NAICS code 541380 for the NASA Shared Services Center. The project requires specialized Reynolds number calibration for six flowmeters, specifically Part number 90-88669-610, to support prime contractors on aerospace projects. The technical scope involves executing calibrations in air at 293 PSIA across 10 points ranging from 31 to 206 SCFM, utilizing equipment maintained at 14.7 PSIA and 60 degrees Fahrenheit. The selected provider must ensure all work complies with ECCN EAR99 regulations and deliver the calibrated flowmeters along with the necessary certifications. The solicitation was posted on October 15, 2026, with a response deadline of October 22, 2026.

NASA Shared Services Center

POSTED

about 8 hours ago

DEADLINE

FLOWMETER, CALIBRATION, AND SIGNAL CONDITIONERS NEEDED FOR PANEL MODIFICATION FOR ESR

Solicitation # 80NSSC26946800Q

Solicitation 80NSSC26946800Q is a small business set-aside request for quotation issued by the NASA Shared Services Center to procure specialized flowmeters, calibration services, and signal conditioners. The primary objectives are to re-establish the Orion scrubber purge capability at the Multi-payload Processing Facility and integrate redundant flowmeters into the Cabin Air Supply Panel for real-time data delivery to the firing room. The required hardware includes six turbine flowmeters (Part FT-08AER1-GEA-1) and signal conditioners (Part TWA-A-9-00-IS), with specific calibration requirements performed in air at 293 PSIA. Performance will take place at the Vehicle Assembly Building on the Mobile Launcher and the Multi-payload Processing Facility. The contract is a firm-fixed-price commercial item procurement governed by FAR 52.212-4. Award will be granted based on the lowest price technically acceptable (LPTA) criteria, requiring offerors to demonstrate full technical compliance with all solicitation requirements. Key administrative details include a delivery term of FOB Destination and a requirement for offerors to be registered in the System for Award Management. The procurement is subject to strict export control regulations, specifically ECCN EAR99, and requires compliance with ITAR and EAR. Quotes must be submitted to McKenzie Hanson by October 22, 2026, and must remain valid for 30 days.

NASA Shared Services Center

POSTED

about 8 hours ago

DEADLINE

Chemical Nutrient Analysis Service for Combat Feeding Division (CFD)

Solicitation # W911QY-26-R-NUTRIENT-ANALYSIS

The U.S. Army Contracting Command-Aberdeen Proving Ground, supporting the Combat Feeding Division of the DEVCOM Soldier Center, is soliciting a single-award, Firm Fixed Price, Indefinite Delivery Indefinite Quantity (IDIQ) contract for chemical nutrient analysis services. The contractor will provide laboratory testing for food ingredients and ration components, with a primary focus on selenium, vitamin B12, and total dietary fiber, though the ability to analyze a wide range of other analytes is required. The contract has a minimum guarantee of $5,000 and a total ceiling of $25,000, with an estimated minimum requirement of 25 samples. The anticipated period of performance is from November 1, 2026, to October 31, 2027. To be eligible, offerors must maintain active ISO/IEC 17025 accreditation and utilize validated, industry-standard methods such as AOAC International, USP, or AACC. The contractor must possess in-house capacity and cannot act as a pass-through to other laboratories. Key requirements include maintaining a documented chain of custody, storing samples under government-specified conditions, and retaining samples for 30 days post-reporting. Results must be delivered within 14 calendar days of sample receipt. Award will be made based on the Lowest Price Technically Acceptable (LPTA) criteria, evaluating technical capability, price, and past performance. This is a full and open competition under NAICS code 541380, with proposals due by 12:00 p.m. EST on October 29, 2026.

W6QK Acc-Apg Natick

POSTED

about 8 hours ago

DEADLINE

More opportunities from National Aeronautics And Space Administration → NASA Shared Services Center

Same awarding agency

Radioactive Waste Logistics and Compliance ConsultingThe Radioactive Waste Logistics and Compliance Consulting subcontract supports prime contractors on NASA Shared Services Center projects by providing a comprehensive administrative and regulatory framework for the movement of radioactive waste. The scope of work includes generating essential shipping documents, managing the labeling and marking of containers, and coordinating brokerage services between NASA, various transporters, and final disposal sites. To ensure full adherence to 49 CFR 172 Subparts D and E, the contractor must possess specialized expertise in DOT, NRC, and EPA regulations. The primary deliverables for this engagement are completed shipping manifests and detailed compliance documentation to verify that all hazardous materials are handled and transported according to federal safety and legal standards.

Environmental Consulting Services

POSTED

about 8 hours ago

DEADLINE

Specialized Radioactive Source EncapsulationThis subcontract involves providing specialized encapsulation services for leaking and high-risk radioactive sources, specifically Am-241 and Americium-Beryllium sources, to support prime contractors on NASA Shared Services Center projects. The scope of work includes both standard and on-site encapsulation of leaking materials to ensure sources are safely prepared for transport and final disposal. Due to the hazardous nature of the materials, the contractor must possess a valid NRC license for handling specific isotopes and maintain specialized radiation safety certifications. This opportunity is categorized under NAICS code 562211 and is managed through the National Aeronautics And Space Administration.

Hazardous Waste Treatment and Disposal

POSTED

about 8 hours ago

DEADLINE

Low-Level Radioactive Waste Disposal ServicesThis subcontract for the NASA Shared Services Center involves providing low-level radioactive waste disposal services, specifically focusing on macro-encapsulation processing and final disposal for prime contractors. The scope of work includes the processing of non-leaking sources, Cs-137-101 sources, and Meterox model SLPS units at licensed facilities. To qualify, the service provider must maintain a valid NRC license for waste disposal and ensure full compliance with EPA regulations. The contractor is responsible for delivering official documentation that confirms the final disposal of all radioactive material sources. This effort falls under NAICS code 562211.

Hazardous Waste Treatment and Disposal

POSTED

about 8 hours ago

DEADLINE

Hazardous Materials Transportation (Radioactive Waste)This subcontract involves the specialized milk run transportation of low-level radioactive waste sources for prime contractors supporting NASA Shared Services Center projects at the Goddard Space Flight Center. The selected provider is responsible for collecting radioactive materials from Building 22 and transporting them to final disposal sites, specifically Waste Control Specialists LLC and Gammatron Inc. To ensure safety and legal adherence, the contractor must utilize vehicles certified for radioactive materials and maintain strict DOT compliance in accordance with 49 CFR 172 Subparts D and E. This operation falls under NAICS code 484220 and is managed by the National Aeronautics and Space Administration.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 8 hours ago

DEADLINE

FOB Destination Delivery of Industrial RackingThis small business set-aside subcontract involves the transport and delivery of oversized industrial racking components for the NASA Shared Services Center. The contractor is responsible for loading and hauling long beams and frames using enclosed trailers or flatbed trucks, ensuring all bill of materials items are delivered to Building 2204 at the Stennis Space Center. Deliveries are scheduled to take place between September 30 and October 15, 2026, under FOB Destination terms. The contractor must provide 48-hour advance notice prior to delivery. This project falls under NAICS code 484220 and is designated as a total small business set-aside.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 8 hours ago

DEADLINE

Supply of NASA Blue Heavy-Duty Pallet Rack ComponentsThis small business set-aside subcontract involves the supply of new, unused heavy-duty pallet rack components for prime contractors working on NASA Shared Services Center projects. The scope of work requires the delivery of 105 total bays, consisting of 15 starter and 90 add-on units, each measuring 96 by 48 inches with three shelf levels. All components must feature galvanized hardware, upright guards, and a durable industrial finish in NASA Blue. The contractor is responsible for delivering complete rack sets, including all necessary product data sheets and warranties, FOB Destination to SSC Building 2204. This procurement falls under NAICS code 332323 and is managed by the National Aeronautics And Space Administration.

Ornamental and Architectural Metal Work Manufacturing

POSTED

about 8 hours ago

DEADLINE

Telemetry System Interconnect CablingThis subcontract for Telemetry System Interconnect Cabling involves the manufacture and delivery of specialized signal and I/O cabling for prime contractors supporting the NASA Shared Services Center. The scope of work specifically requires the production of CAB-1632 10-inch cables and CAB-674 Basic Octopus Signal I/O cables. All hardware must be constructed using high-reliability signal cabling and maintain full compatibility with Acroamatics Model 1632AP-2 and 674DM hardware. The completed cable assemblies are to be delivered to Huntsville, Alabama. This opportunity falls under NAICS code 335921 and was posted on October 15, 2026, with a response deadline of October 20, 2026.

Fiber Optic Cable Manufacturing

POSTED

about 8 hours ago

DEADLINE

Telemetry Processing Cards and Mezzanines SupplyThis subcontract involves the manufacture and supply of high-precision telemetry hardware for prime contractors supporting NASA Shared Services Center projects. The scope of work specifically requires the production of Model 1632AP-2 Dual Stream Multi-Function Programmable Telemetry Decommutator PCM Processing Cards and Model 674DM Tunable Dual Channel 40 Mbps Advanced PCM Bit Sync Mezzanines. These components must be developed using proprietary circuitry and firmware while strictly adhering to NASA MSFC telemetry specifications. The completed hardware is to be delivered to Huntsville, Alabama. This procurement falls under NAICS code 334290 and was posted on October 15, 2026, with a response deadline of October 20, 2026.

Other Communications Equipment Manufacturing

POSTED

about 8 hours ago

DEADLINE

Industrial Gas and Consumables SupplyThis 8(a) sole source subcontract through the NASA Shared Services Center focuses on the provision of industrial gases and consumables for prime contractors. The scope of work includes the delivery of bulk tanks, gas cylinders, and high-purity Argon gas specifically required for laser systems. Additionally, the contract covers DED-specific consumables, such as filters and Argon nozzles, while ensuring all supplies adhere to strict industrial gas purity standards. Classified under NAICS code 424690, the opportunity was posted on October 15, 2026, with a response deadline of October 20, 2026. This procurement is designated as an 8(a) set-aside under FAR 19.8, streamlining the acquisition of critical shielding gases and wear-parts necessary for the successful execution of NASA projects.

Other Chemical and Allied Products Merchant Wholesalers

POSTED

about 8 hours ago

DEADLINE

Specialty Metal Powder Supply (HR-1 and Ni-Alloys)This 8(a) sole source subcontract through the NASA Shared Services Center involves the supply of high-purity metal powders for prime contractors. The scope of work requires the provision of NASA HR-1 Fe-Ni alloy powder and Ni-based alloy powders, available in virgin, 1x, 2x, and 3x used states. All materials must strictly adhere to NASA purity standards and specific material requirements, with the supplier responsible for delivering bulk powder directly to the fabrication site. The opportunity is categorized under NAICS code 331110 and was posted on October 15, 2026, with a response deadline of October 20, 2026. This procurement is specifically set aside for 8(a) participants under FAR 19.8 to support critical National Aeronautics and Space Administration projects.

Iron and Steel Mills and Ferroalloy Manufacturing

POSTED

about 8 hours ago

DEADLINE

Large-Scale LP-DED Additive Manufacturing ServicesThis 8(a) sole source subcontract with the NASA Shared Services Center focuses on large-scale additive manufacturing services utilizing Laser Powder Directed Energy Deposition. The scope of work involves the fabrication of HR-1 and Ni-alloy heat sink chambers along with qualification samples, leveraging a specialized machine platform capable of producing components exceeding 90 inches in height and 80 inches in diameter. A critical technical requirement of the contract is the generation of precise toolpath strategies for 557 laser systems to ensure a consistent 1mm wall thickness. The final deliverables for this engagement include the completed heat sink chambers and representative test samples to verify manufacturing quality and specifications.

POSTED

about 8 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS