Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Large-Scale LP-DED Additive Manufacturing Services

Active

Federal

Response Deadline10/20/2026, 08:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This 8(a) sole source subcontract with the NASA Shared Services Center focuses on large-scale additive manufacturing services utilizing Laser Powder Directed Energy Deposition. The scope of work involves the fabrication of HR-1 and Ni-alloy heat sink chambers along with qualification samples, leveraging a specialized machine platform capable of producing components exceeding 90 inches in height and 80 inches in diameter. A critical technical requirement of the contract is the generation of precise toolpath strategies for 557 laser systems to ensure a consistent 1mm wall thickness. The final deliverables for this engagement include the completed heat sink chambers and representative test samples to verify manufacturing quality and specifications.

General Info

8(a) sole source subcontract for large-scale additive manufacturing of NASA heat sink chambers.

Agency

National Aeronautics And Space Administration → NASA Shared Services Center

NAICS

332710 - Machine Shops

Place of Performance

MS, USA

Set-Aside

8A

Documents

This scope was carved out of 80NSSC26947003Q.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

NASA HR-1 Demonstrator Chamber and Qualification Samples

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 15

subcontract

Response DeadlineOct 20

Submission deadline

Response Deadline

10/20/2026, 08:00:00 PM UTCin 5 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyNational Aeronautics And Space Administration → NASA Shared Services Center

ContactsNo contacts available

OfficeN/A

Organization / AgencyNational Aeronautics And Space Administration → NASA Shared Services Center

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs large-scale manufacturing using Laser Powder Directed Energy Deposition (LP-DED) for prime contractors on NASA Shared Services Center projects. Fabricates HR-1 and Ni-alloy heat sink chambers and qualification samples using a machine platform with >90” height and >80” diameter. Generates toolpath strategies for 557 laser systems to achieve 1mm wall thickness. Delivers completed chambers and representative test samples.

Similar Contracts

Same NAICS industry code

Manufacturer of Seal Retainer (NSN 5330-00-798-6226)

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 4 hours ago

DEADLINE

Manufacture of Spacer Plates (NSN 5365-01-274-8974)

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 4 hours ago

DEADLINE

Precision Machining of Shouldered Shafts

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

Final Machining and Assembly of Deaerator Unit

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 4 hours ago

DEADLINE

Rigid Connecting Link Fabrication

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 4 hours ago

DEADLINE

CARC Coating ApplicationThis subcontract involves the supply and application of non-toxic Chemical Agent Resistant Coating for the DLA Weapons Support Land Supply Chain. The scope of work requires the contractor to perform surface preparation and apply a Green 383 #34094 top coat in accordance with Fed-STD-595. All work must be completed using a CARC-certified spray booth, and the provider must hold the necessary certifications to handle and apply these specific coatings. The primary deliverable for this project is eight finished ladders featuring the compliant non-toxic CARC top coat. Performance will take place in New Cumberland, Pennsylvania. Interested parties must respond by October 26, 2026, regarding this requirement under NAICS code 332710.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

Precision Machining and Finishing of Tie Down AdaptersThis subcontract involves the precision machining and finishing of Tie Down Adapters for the Department of Defense, specifically supporting the DLA Weapons Support ASC. The scope of work requires the execution of CNC milling and turning in strict accordance with TDP Rev A Gen 1 specifications. Key compliance mandates include physical identification per RQ017, inspection standards following MIL-STD-1916 or ASQ H1331, and adherence to MIL-STD-129 marking requirements. The contractor must maintain a CMMC Level 2 self-assessment to ensure cybersecurity compliance. Performance of the contract will take place in New Cumberland, Pennsylvania. Interested parties must respond by October 23, 2026, to provide finished and inspected components under NAICS code 332710.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 4 hours ago

DEADLINE

Precision Fabrication of Driver, Lock AssemblyThis subcontract, issued by the DLA Weapons Support ASC Commodities Division, involves the precision fabrication of Driver, Lock Assembly components, specifically part number B83260F under NSN 5342-01-033-4265. The project requires strict adherence to technical drawings and precision machining to satisfy Critical Application Item tolerances. Quality assurance must be maintained through zero-based sampling plans in accordance with MIL-STD-1916 or ASQ H1331, and finished assemblies are to be delivered in lots ranging from 10 to 30 units. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 332710. To be eligible, contractors must ensure full cybersecurity compliance with DFARS 252.204-7012. The solicitation was posted on October 15, 2026, with a response deadline of October 22, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

Manufacturer of Plain Studs (NSN 5307-00-563-9116)

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

Final Machining and Finishing of Swaging Terminals

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 4 hours ago

DEADLINE

Valve Flange Manufacturer

DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

Precision Fabrication of Metering Tubes (NSN 6680-01-569-0497)

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

More opportunities from National Aeronautics And Space Administration → NASA Shared Services Center

Same awarding agency

Radioactive Waste Logistics and Compliance ConsultingThe Radioactive Waste Logistics and Compliance Consulting subcontract supports prime contractors on NASA Shared Services Center projects by providing a comprehensive administrative and regulatory framework for the movement of radioactive waste. The scope of work includes generating essential shipping documents, managing the labeling and marking of containers, and coordinating brokerage services between NASA, various transporters, and final disposal sites. To ensure full adherence to 49 CFR 172 Subparts D and E, the contractor must possess specialized expertise in DOT, NRC, and EPA regulations. The primary deliverables for this engagement are completed shipping manifests and detailed compliance documentation to verify that all hazardous materials are handled and transported according to federal safety and legal standards.

Environmental Consulting Services

POSTED

about 9 hours ago

DEADLINE

Specialized Radioactive Source EncapsulationThis subcontract involves providing specialized encapsulation services for leaking and high-risk radioactive sources, specifically Am-241 and Americium-Beryllium sources, to support prime contractors on NASA Shared Services Center projects. The scope of work includes both standard and on-site encapsulation of leaking materials to ensure sources are safely prepared for transport and final disposal. Due to the hazardous nature of the materials, the contractor must possess a valid NRC license for handling specific isotopes and maintain specialized radiation safety certifications. This opportunity is categorized under NAICS code 562211 and is managed through the National Aeronautics And Space Administration.

Hazardous Waste Treatment and Disposal

POSTED

about 9 hours ago

DEADLINE

Low-Level Radioactive Waste Disposal ServicesThis subcontract for the NASA Shared Services Center involves providing low-level radioactive waste disposal services, specifically focusing on macro-encapsulation processing and final disposal for prime contractors. The scope of work includes the processing of non-leaking sources, Cs-137-101 sources, and Meterox model SLPS units at licensed facilities. To qualify, the service provider must maintain a valid NRC license for waste disposal and ensure full compliance with EPA regulations. The contractor is responsible for delivering official documentation that confirms the final disposal of all radioactive material sources. This effort falls under NAICS code 562211.

Hazardous Waste Treatment and Disposal

POSTED

about 9 hours ago

DEADLINE

Hazardous Materials Transportation (Radioactive Waste)This subcontract involves the specialized milk run transportation of low-level radioactive waste sources for prime contractors supporting NASA Shared Services Center projects at the Goddard Space Flight Center. The selected provider is responsible for collecting radioactive materials from Building 22 and transporting them to final disposal sites, specifically Waste Control Specialists LLC and Gammatron Inc. To ensure safety and legal adherence, the contractor must utilize vehicles certified for radioactive materials and maintain strict DOT compliance in accordance with 49 CFR 172 Subparts D and E. This operation falls under NAICS code 484220 and is managed by the National Aeronautics and Space Administration.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 9 hours ago

DEADLINE

FOB Destination Delivery of Industrial RackingThis small business set-aside subcontract involves the transport and delivery of oversized industrial racking components for the NASA Shared Services Center. The contractor is responsible for loading and hauling long beams and frames using enclosed trailers or flatbed trucks, ensuring all bill of materials items are delivered to Building 2204 at the Stennis Space Center. Deliveries are scheduled to take place between September 30 and October 15, 2026, under FOB Destination terms. The contractor must provide 48-hour advance notice prior to delivery. This project falls under NAICS code 484220 and is designated as a total small business set-aside.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 9 hours ago

DEADLINE

Supply of NASA Blue Heavy-Duty Pallet Rack ComponentsThis small business set-aside subcontract involves the supply of new, unused heavy-duty pallet rack components for prime contractors working on NASA Shared Services Center projects. The scope of work requires the delivery of 105 total bays, consisting of 15 starter and 90 add-on units, each measuring 96 by 48 inches with three shelf levels. All components must feature galvanized hardware, upright guards, and a durable industrial finish in NASA Blue. The contractor is responsible for delivering complete rack sets, including all necessary product data sheets and warranties, FOB Destination to SSC Building 2204. This procurement falls under NAICS code 332323 and is managed by the National Aeronautics And Space Administration.

Ornamental and Architectural Metal Work Manufacturing

POSTED

about 9 hours ago

DEADLINE

Telemetry System Interconnect CablingThis subcontract for Telemetry System Interconnect Cabling involves the manufacture and delivery of specialized signal and I/O cabling for prime contractors supporting the NASA Shared Services Center. The scope of work specifically requires the production of CAB-1632 10-inch cables and CAB-674 Basic Octopus Signal I/O cables. All hardware must be constructed using high-reliability signal cabling and maintain full compatibility with Acroamatics Model 1632AP-2 and 674DM hardware. The completed cable assemblies are to be delivered to Huntsville, Alabama. This opportunity falls under NAICS code 335921 and was posted on October 15, 2026, with a response deadline of October 20, 2026.

Fiber Optic Cable Manufacturing

POSTED

about 9 hours ago

DEADLINE

Telemetry Processing Cards and Mezzanines SupplyThis subcontract involves the manufacture and supply of high-precision telemetry hardware for prime contractors supporting NASA Shared Services Center projects. The scope of work specifically requires the production of Model 1632AP-2 Dual Stream Multi-Function Programmable Telemetry Decommutator PCM Processing Cards and Model 674DM Tunable Dual Channel 40 Mbps Advanced PCM Bit Sync Mezzanines. These components must be developed using proprietary circuitry and firmware while strictly adhering to NASA MSFC telemetry specifications. The completed hardware is to be delivered to Huntsville, Alabama. This procurement falls under NAICS code 334290 and was posted on October 15, 2026, with a response deadline of October 20, 2026.

Other Communications Equipment Manufacturing

POSTED

about 9 hours ago

DEADLINE

Industrial Gas and Consumables SupplyThis 8(a) sole source subcontract through the NASA Shared Services Center focuses on the provision of industrial gases and consumables for prime contractors. The scope of work includes the delivery of bulk tanks, gas cylinders, and high-purity Argon gas specifically required for laser systems. Additionally, the contract covers DED-specific consumables, such as filters and Argon nozzles, while ensuring all supplies adhere to strict industrial gas purity standards. Classified under NAICS code 424690, the opportunity was posted on October 15, 2026, with a response deadline of October 20, 2026. This procurement is designated as an 8(a) set-aside under FAR 19.8, streamlining the acquisition of critical shielding gases and wear-parts necessary for the successful execution of NASA projects.

Other Chemical and Allied Products Merchant Wholesalers

POSTED

about 9 hours ago

DEADLINE

Material Characterization and Metallurgical TestingThis 8(a) sole source subcontract, titled Material Characterization and Metallurgical Testing, supports prime contractors on projects for the NASA Shared Services Center. The scope of work involves performing both destructive and non-destructive testing on process characterization samples and witness coupons. Key technical activities include metallography, mechanical testing, and thermophysical testing, utilizing specialized equipment for polishing, etching, and tensile and hardness measurements. All work must be conducted in strict adherence to NASA material property testing specifications, culminating in the delivery of detailed test reports and results. The contract falls under NAICS code 541380 and was posted on October 15, 2026, with a response deadline of October 20, 2026.

Testing Laboratories and Services

POSTED

about 9 hours ago

DEADLINE

Precision Metrology and Laser Scanning ServicesThis 8(a) sole source subcontract, titled Precision Metrology and Laser Scanning Services, supports prime contractors on projects for the NASA Shared Services Center. The scope of work involves performing final hardware inspections and geometric verification using high-precision large-scale laser scanners. The primary objective is to compare completed chamber data against original CAD geometry to ensure strict adherence to NASA-approved standards. The selected provider is responsible for delivering comprehensive inspection reports and the associated scan data. This specialized technical service falls under NAICS code 541380, focusing on high-accuracy metrology to verify the structural integrity and dimensional accuracy of critical aerospace hardware.

Testing Laboratories and Services

POSTED

about 9 hours ago

DEADLINE

Specialty Metal Powder Supply (HR-1 and Ni-Alloys)This 8(a) sole source subcontract through the NASA Shared Services Center involves the supply of high-purity metal powders for prime contractors. The scope of work requires the provision of NASA HR-1 Fe-Ni alloy powder and Ni-based alloy powders, available in virgin, 1x, 2x, and 3x used states. All materials must strictly adhere to NASA purity standards and specific material requirements, with the supplier responsible for delivering bulk powder directly to the fabrication site. The opportunity is categorized under NAICS code 331110 and was posted on October 15, 2026, with a response deadline of October 20, 2026. This procurement is specifically set aside for 8(a) participants under FAR 19.8 to support critical National Aeronautics and Space Administration projects.

Iron and Steel Mills and Ferroalloy Manufacturing

POSTED

about 9 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS