Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Low-Level Radioactive Waste Disposal Services

Active

Federal

Response Deadline10/21/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for the NASA Shared Services Center involves providing low-level radioactive waste disposal services, specifically focusing on macro-encapsulation processing and final disposal for prime contractors. The scope of work includes the processing of non-leaking sources, Cs-137-101 sources, and Meterox model SLPS units at licensed facilities. To qualify, the service provider must maintain a valid NRC license for waste disposal and ensure full compliance with EPA regulations. The contractor is responsible for delivering official documentation that confirms the final disposal of all radioactive material sources. This effort falls under NAICS code 562211.

General Info

Subcontract for NRC-licensed radioactive waste disposal and macro-encapsulation services for NASA Shared Services.

Agency

National Aeronautics And Space Administration → NASA Shared Services Center

NAICS

562211 - Hazardous Waste Treatment and Disposal

Place of Performance

MS

Set-Aside

NONE

Documents

This scope was carved out of 80NSSC27943671Q.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

waste management, transportation and disposal services for low-level radioactive waste material located at Goddard Space Flight Center,

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 15

subcontract

Response DeadlineOct 21

Submission deadline

Response Deadline

10/21/2026, 05:00:00 PM UTCin 6 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyNational Aeronautics And Space Administration → NASA Shared Services Center

ContactsNo contacts available

OfficeN/A

Organization / AgencyNational Aeronautics And Space Administration → NASA Shared Services Center

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs macro-encapsulation processing and final disposal of radioactive sources for prime contractors on NASA Shared Services Center projects. Processes non-leaking sources, Meterox model SLPS units, and Cs-137-101 sources via macro-encapsulation at licensed facilities. Requires NRC license for waste disposal and EPA compliance. Delivers official documentation confirming the final disposal of the radioactive material sources.

Similar Contracts

Same NAICS industry code

Specialized Radioactive Source EncapsulationThis subcontract involves providing specialized encapsulation services for leaking and high-risk radioactive sources, specifically Am-241 and Americium-Beryllium sources, to support prime contractors on NASA Shared Services Center projects. The scope of work includes both standard and on-site encapsulation of leaking materials to ensure sources are safely prepared for transport and final disposal. Due to the hazardous nature of the materials, the contractor must possess a valid NRC license for handling specific isotopes and maintain specialized radiation safety certifications. This opportunity is categorized under NAICS code 562211 and is managed through the National Aeronautics And Space Administration.

NASA Shared Services Center

POSTED

about 9 hours ago

DEADLINE

waste management, transportation and disposal services for low-level radioactive waste material located at Goddard Space Flight Center,

Solicitation # 80NSSC27943671Q

Solicitation 80NSSC27943671Q is a small business set-aside for the National Aeronautics and Space Administration NASA Shared Services Center to obtain waste management, transportation, and disposal services for low-level radioactive waste material located at the Goddard Space Flight Center in Greenbelt, Maryland. The contractor will be responsible for brokerage, providing shipping documents, labeling, marking containers, and managing milk run transportation. Specific tasks include the processing and disposal of Cs-137-101 sources and non-leaking sources and Meterox model SLPS units via macro-encapsulation at Waste Control Specialists LLC. The performance schedule includes the encapsulation of Am-241 and leaking AmBe sources by Gammatron Inc in October 2026, with a final collection of all sources during the December 2026 milk run. This is a firm-fixed-price contract awarded based on the lowest price technically acceptable (LPTA) method. The contractor must strictly adhere to Department of Transportation requirements per 49 CFR 172 Subparts D and E, as well as Nuclear Regulatory Commission and Environmental Protection Agency regulations. Key deliverables include providing the GSFC Radiation Protection Office with official documentation confirming the disposal of radioactive materials. All services are provided on an FOB Destination basis. Interested offerors must be registered in the System for Award Management and submit their quotes to Sara Jusino-Terry by October 21, 2026.

NASA Shared Services Center

POSTED

about 9 hours ago

DEADLINE

Salvage And Recycling Of Decommissioned Electrical Equipment

Solicitation # 26-27-10

The City of Anaheim, specifically the Anaheim Public Utilities Department, is soliciting proposals for the salvage and recycling of decommissioned electrical equipment under solicitation number 26-27-10. The selected provider will be responsible for performing monthly or as-requested pickups from Anaheim facilities, ensuring all services are conducted in a professional manner and in strict compliance with federal, state, and local environmental regulations. A critical component of the scope involves the handling of polychlorinated biphenyls (PCBs), requiring the provider to perform environmental testing using EPA-approved analytical methods and maintain rigorous documentation, including shipment records, transportation manifests, and disposition reports. The award process is based on a fair and competitive selection where evaluation is not limited to price alone. A review board will score proposals based on qualifications and approach, and may conduct interviews with top-ranked respondents before entering negotiations. To be eligible, respondents must demonstrate a proven track record with entities of comparable size, maintain an active Anaheim business license and California Secretary of State registration, and comply with California prevailing wage and workers' compensation laws. Proposals must be submitted electronically via the designated online portal by November 10, 2026, and must include a completed fee schedule and at least three customer references. Failure to comply with RFP requirements or taking excessive exceptions to the Pro Forma Professional Services Agreement may result in a proposal being deemed non-responsive.

City of Anaheim

POSTED

about 17 hours ago

DEADLINE

Turkey Hazardous Waste Solicitation

Solicitation # SP450026R0015

Solicitation SP450026R0015 is a request for proposals for the removal, transportation, and disposal of electronic and hazardous waste generated by the Department of Defense, primarily the U.S. Air Force, at Incirlik Air Base and other locations throughout Turkey. The scope of work includes the preparation, containerization, marking, and final disposal of various waste streams, such as batteries and lamps, while specifically excluding radioactive, explosive, and biohazardous medical wastes. The contract consists of one 30-month base period and one 30-month option period, with a start date no later than November 23, 2026. Award will be determined using a best value trade-off process where past performance is significantly more important than price. Offerors must be registered to do business in Turkey and comply with the Final Governing Standards Turkey 2025, as well as host nation laws and international agreements. Proposals must be submitted electronically in two volumes covering certifications, pricing, and past performance. Key requirements include the use of licensed Treatment, Storage, and Disposal Facilities listed on the DLA Qualified Facilities List and adherence to strict packaging and labeling standards in both English and Turkish.

DLA Disposition Services - Ebs

POSTED

DEADLINE

IFB 2026-4092 Hazardous and Non-Hazardous Waste Removal, Transport and Destruction Services for the Southern California facilities

Solicitation # 2026-4092

The California Department of Tax and Fee Administration (CDTFA) is soliciting bids under IFB 2026-4092 for the pickup, removal, transport, and destruction of hazardous and non-hazardous waste, including liquid nicotine and cannabis products, from its Southern California facilities in Santa Fe Springs. The contract begins on November 16, 2026, and runs through June 30, 2027, with options for two one-year renewals. Services are estimated to be required monthly or on an as-needed basis during normal business hours. The award will be granted to the lowest responsible responsive bidder. Contractors must utilize a permitted Treatment, Storage, and Disposal Facility (TSDF) and adhere to strict regulatory standards, including CCR Title 22 and Cal-OSHA training requirements. Key deliverables include providing various waste containers, maintaining a complete chain-of-custody record, and issuing Certificates of Disposal and Destruction. Bidders must provide proof of extensive insurance coverage, including Commercial General Liability, Automobile Liability, and Workers Compensation, with an AM Best rating of at least A-. Required certifications include DTSC registration, a Commercial Motor Carrier Permit, and a California Highway Patrol safety record report. Bids must be submitted by November 6, 2026, at 5:00 PM. Submissions must be sent via email to the designated contact, ensuring the subject line contains the company name and the body references the IFB number. Physical submissions are permitted but must be printed single-sided to avoid being deemed non-responsive. Bidders are also required to submit a DVBE Declaration and a CUF Compliance Form if applicable, and must disclose any use of Generative AI in their deliverables.

California Department of Tax and Fee Administration

POSTED

DEADLINE

Freezer Decommissioning and Legal DisposalThis small business set-aside subcontract involves the decommissioning, dismantling, and lawful disposal of existing freezer units for prime contractors on DLA Troop Support projects located at Fort Campbell, Kentucky. The selected provider is responsible for rigging old units and ensuring all removal activities comply with local, state, and federal environmental laws. Key deliverables include a fully cleared site and the provision of EPA refrigerant disposal manifests. Personnel assigned to this project are required to possess a Real ID. The opportunity is categorized under NAICS code 562211 and is managed through the Department of Defense.

Director Of Sub DLA Troop Support

POSTED

DEADLINE

DEA-Licensed Pharmaceutical Waste DisposalThis subcontract opportunity with the Department of Veterans Affairs involves the collection, transport, and disposal of Schedule II through V Controlled Substances. The selected provider will support prime contractors on hazardous waste projects by managing pharmaceutical waste streams and maintaining strict chain-of-custody documentation to ensure full DEA compliance. A critical requirement for this role is that the contractor must be registered with the Drug Enforcement Agency as a Controlled Substance reverse distributor. The scope of work concludes with the delivery of certified destruction and disposal records to verify the proper handling of all materials.

245-NETWORK Contract Office 5 (36C245)

POSTED

DEADLINE

Liquid Sludge Hauling and Disposal ServicesThis subcontract for Liquid Sludge Hauling and Disposal Services involves the pumping, transport, and legal disposal of waste activated sludge for prime contractors working on Paradise Township Sewer Authority projects in Lancaster County, Pennsylvania. The selected provider will be responsible for pumping sludge from thickening manholes using 4-inch pipes and hauling the material from 33 Singer Avenue to approved disposal sites. The scope of work includes the annual delivery and certified disposal of approximately 2,160,000 gallons of sludge. To fulfill the contract requirements, the provider must utilize tanker trucks and pumps and ensure all disposal activities are conducted at PADEP-certified facilities. All operations must strictly adhere to the regulatory standards set forth by PA DEP Act 97 and US EPA CFR 503. Responses for this opportunity are due by November 12, 2026.

Lancaster County

POSTED

DEADLINE

Hazardous Waste Disposal and DestructionThis subcontract opportunity with the University of Houston involves the final disposal and destruction of hazardous chemical waste. The selected contractor will be responsible for processing waste through secure chemical landfilling or high-temperature incineration at a permitted Treatment, Storage, and Disposal Facility. To ensure compliance and safety, the provider must hold an EPA Part B Permit along with all necessary state environmental agency permits and is required to deliver official Certificates of Destruction or Disposal. The project falls under NAICS code 562211 and is open for responses until October 30, 2026. Interested parties can find further details through the Texas SmartBuy portal.

University of Houston

POSTED

DEADLINE

RFP-730-UofH-3153 Chemical Waste Disposal Services FY27

Solicitation # RFP-730-UofH-3153

The University of Houston is soliciting proposals under RFP-730-UofH-3153 for comprehensive chemical waste disposal services for fiscal year 2027. The selected vendor will be responsible for the analytical, collection, management, transportation, disposal, and recycling of both hazardous and non-hazardous waste materials generated by the university. All services are to be performed in Texas for the University of Houston. Interested vendors must submit their proposals through the JAGGAER Sourcing Event Portal by the deadline of October 30, 2026, at 10:00 PM UTC. A non-mandatory pre-submittal meeting is scheduled for October 19, 2026, at 10:00 AM CT via Microsoft Teams. While reference documents may be available on the Electronic State Business Daily, all official responses and bid submissions must be completed exclusively through the JAGGAER portal. The primary point of contact for this solicitation is Srivalli Chintapalli.

University of Houston

POSTED

DEADLINE

Legacy LED Hardware Removal and Eco-Friendly DisposalThis subcontract involves the decommissioning, removal, and environmentally compliant disposal of legacy electronic signage at Clackamas Community College facility projects. The scope of work includes the removal of Samsung and Prismview LED panels, internal hardware, media players, and Cradlepoint equipment. The selected contractor is responsible for transporting all materials to certified facilities for eco-friendly e-waste recycling and must deliver cleared monument structures along with official disposal certificates. The project is categorized under NAICS code 562211 and was posted on October 9, 2026, with a response deadline of November 3, 2026. The work is performed on behalf of prime contractors to ensure that all electronic waste is handled according to environmental standards.

Clackamas Community College

POSTED

DEADLINE

USMCFP SPRINGFIELD - Bio-Medical Waste Removal

Solicitation # 15B41427Q00000002

The Federal Bureau of Prisons is soliciting a total small business set-aside contract for bio-medical waste removal services at USMCFP Springfield, located at 1900 W Sunshine St., Springfield, Missouri. The contractor will be responsible for the collection, removal, and disposal of infectious medical waste, with an estimated annual volume of 85,000 lbs. Services are required every Monday, Wednesday, and Friday during two specific time windows: 7:30 am to 10:30 am or 11:30 am to 2:30 pm. The contractor must provide sanitized red reusable plastic tubs, preferably 31 gallons in size and not exceeding 24x24x24 inches, along with necessary liners and tape. The period of performance consists of a 12-month base period from November 1, 2026, to October 31, 2027, with a six-month option to extend through April 30, 2028. The selected entity must maintain all applicable Federal, EPA, and Missouri licensing and comply with patient material disposal standards to protect patient privacy. Billing will be based on the actual weight of waste collected, excluding the weight of tubs and lids, and invoices must include the date and number of pickups. Performance will be monitored by a Contracting Officer's Representative, and the contractor must respond to any discrepancy reports within ten calendar days.

Usmcfp Springfield

POSTED

DEADLINE

More opportunities from National Aeronautics And Space Administration → NASA Shared Services Center

Same awarding agency

Radioactive Waste Logistics and Compliance ConsultingThe Radioactive Waste Logistics and Compliance Consulting subcontract supports prime contractors on NASA Shared Services Center projects by providing a comprehensive administrative and regulatory framework for the movement of radioactive waste. The scope of work includes generating essential shipping documents, managing the labeling and marking of containers, and coordinating brokerage services between NASA, various transporters, and final disposal sites. To ensure full adherence to 49 CFR 172 Subparts D and E, the contractor must possess specialized expertise in DOT, NRC, and EPA regulations. The primary deliverables for this engagement are completed shipping manifests and detailed compliance documentation to verify that all hazardous materials are handled and transported according to federal safety and legal standards.

Environmental Consulting Services

POSTED

about 9 hours ago

DEADLINE

Hazardous Materials Transportation (Radioactive Waste)This subcontract involves the specialized milk run transportation of low-level radioactive waste sources for prime contractors supporting NASA Shared Services Center projects at the Goddard Space Flight Center. The selected provider is responsible for collecting radioactive materials from Building 22 and transporting them to final disposal sites, specifically Waste Control Specialists LLC and Gammatron Inc. To ensure safety and legal adherence, the contractor must utilize vehicles certified for radioactive materials and maintain strict DOT compliance in accordance with 49 CFR 172 Subparts D and E. This operation falls under NAICS code 484220 and is managed by the National Aeronautics and Space Administration.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 9 hours ago

DEADLINE

FOB Destination Delivery of Industrial RackingThis small business set-aside subcontract involves the transport and delivery of oversized industrial racking components for the NASA Shared Services Center. The contractor is responsible for loading and hauling long beams and frames using enclosed trailers or flatbed trucks, ensuring all bill of materials items are delivered to Building 2204 at the Stennis Space Center. Deliveries are scheduled to take place between September 30 and October 15, 2026, under FOB Destination terms. The contractor must provide 48-hour advance notice prior to delivery. This project falls under NAICS code 484220 and is designated as a total small business set-aside.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 9 hours ago

DEADLINE

Supply of NASA Blue Heavy-Duty Pallet Rack ComponentsThis small business set-aside subcontract involves the supply of new, unused heavy-duty pallet rack components for prime contractors working on NASA Shared Services Center projects. The scope of work requires the delivery of 105 total bays, consisting of 15 starter and 90 add-on units, each measuring 96 by 48 inches with three shelf levels. All components must feature galvanized hardware, upright guards, and a durable industrial finish in NASA Blue. The contractor is responsible for delivering complete rack sets, including all necessary product data sheets and warranties, FOB Destination to SSC Building 2204. This procurement falls under NAICS code 332323 and is managed by the National Aeronautics And Space Administration.

Ornamental and Architectural Metal Work Manufacturing

POSTED

about 9 hours ago

DEADLINE

Telemetry System Interconnect CablingThis subcontract for Telemetry System Interconnect Cabling involves the manufacture and delivery of specialized signal and I/O cabling for prime contractors supporting the NASA Shared Services Center. The scope of work specifically requires the production of CAB-1632 10-inch cables and CAB-674 Basic Octopus Signal I/O cables. All hardware must be constructed using high-reliability signal cabling and maintain full compatibility with Acroamatics Model 1632AP-2 and 674DM hardware. The completed cable assemblies are to be delivered to Huntsville, Alabama. This opportunity falls under NAICS code 335921 and was posted on October 15, 2026, with a response deadline of October 20, 2026.

Fiber Optic Cable Manufacturing

POSTED

about 9 hours ago

DEADLINE

Telemetry Processing Cards and Mezzanines SupplyThis subcontract involves the manufacture and supply of high-precision telemetry hardware for prime contractors supporting NASA Shared Services Center projects. The scope of work specifically requires the production of Model 1632AP-2 Dual Stream Multi-Function Programmable Telemetry Decommutator PCM Processing Cards and Model 674DM Tunable Dual Channel 40 Mbps Advanced PCM Bit Sync Mezzanines. These components must be developed using proprietary circuitry and firmware while strictly adhering to NASA MSFC telemetry specifications. The completed hardware is to be delivered to Huntsville, Alabama. This procurement falls under NAICS code 334290 and was posted on October 15, 2026, with a response deadline of October 20, 2026.

Other Communications Equipment Manufacturing

POSTED

about 9 hours ago

DEADLINE

Industrial Gas and Consumables SupplyThis 8(a) sole source subcontract through the NASA Shared Services Center focuses on the provision of industrial gases and consumables for prime contractors. The scope of work includes the delivery of bulk tanks, gas cylinders, and high-purity Argon gas specifically required for laser systems. Additionally, the contract covers DED-specific consumables, such as filters and Argon nozzles, while ensuring all supplies adhere to strict industrial gas purity standards. Classified under NAICS code 424690, the opportunity was posted on October 15, 2026, with a response deadline of October 20, 2026. This procurement is designated as an 8(a) set-aside under FAR 19.8, streamlining the acquisition of critical shielding gases and wear-parts necessary for the successful execution of NASA projects.

Other Chemical and Allied Products Merchant Wholesalers

POSTED

about 9 hours ago

DEADLINE

Material Characterization and Metallurgical TestingThis 8(a) sole source subcontract, titled Material Characterization and Metallurgical Testing, supports prime contractors on projects for the NASA Shared Services Center. The scope of work involves performing both destructive and non-destructive testing on process characterization samples and witness coupons. Key technical activities include metallography, mechanical testing, and thermophysical testing, utilizing specialized equipment for polishing, etching, and tensile and hardness measurements. All work must be conducted in strict adherence to NASA material property testing specifications, culminating in the delivery of detailed test reports and results. The contract falls under NAICS code 541380 and was posted on October 15, 2026, with a response deadline of October 20, 2026.

Testing Laboratories and Services

POSTED

about 9 hours ago

DEADLINE

Precision Metrology and Laser Scanning ServicesThis 8(a) sole source subcontract, titled Precision Metrology and Laser Scanning Services, supports prime contractors on projects for the NASA Shared Services Center. The scope of work involves performing final hardware inspections and geometric verification using high-precision large-scale laser scanners. The primary objective is to compare completed chamber data against original CAD geometry to ensure strict adherence to NASA-approved standards. The selected provider is responsible for delivering comprehensive inspection reports and the associated scan data. This specialized technical service falls under NAICS code 541380, focusing on high-accuracy metrology to verify the structural integrity and dimensional accuracy of critical aerospace hardware.

Testing Laboratories and Services

POSTED

about 9 hours ago

DEADLINE

Specialty Metal Powder Supply (HR-1 and Ni-Alloys)This 8(a) sole source subcontract through the NASA Shared Services Center involves the supply of high-purity metal powders for prime contractors. The scope of work requires the provision of NASA HR-1 Fe-Ni alloy powder and Ni-based alloy powders, available in virgin, 1x, 2x, and 3x used states. All materials must strictly adhere to NASA purity standards and specific material requirements, with the supplier responsible for delivering bulk powder directly to the fabrication site. The opportunity is categorized under NAICS code 331110 and was posted on October 15, 2026, with a response deadline of October 20, 2026. This procurement is specifically set aside for 8(a) participants under FAR 19.8 to support critical National Aeronautics and Space Administration projects.

Iron and Steel Mills and Ferroalloy Manufacturing

POSTED

about 9 hours ago

DEADLINE

Large-Scale LP-DED Additive Manufacturing ServicesThis 8(a) sole source subcontract with the NASA Shared Services Center focuses on large-scale additive manufacturing services utilizing Laser Powder Directed Energy Deposition. The scope of work involves the fabrication of HR-1 and Ni-alloy heat sink chambers along with qualification samples, leveraging a specialized machine platform capable of producing components exceeding 90 inches in height and 80 inches in diameter. A critical technical requirement of the contract is the generation of precise toolpath strategies for 557 laser systems to ensure a consistent 1mm wall thickness. The final deliverables for this engagement include the completed heat sink chambers and representative test samples to verify manufacturing quality and specifications.

POSTED

about 9 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS