Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Non-Destructive Testing (NDT) Services

Active

Federal

Response Deadline07/29/2026, 10:30:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the performance of non-destructive testing services on valve components used in aerospace applications, specifically employing dye penetrant, magnetic particle, and ultrasonic testing methods both before and after repair to verify structural integrity and ensure compliance with stringent aerospace safety standards. These inspections are critical to maintaining the reliability and operational safety of components subjected to high-stress environments, with all work governed by established technical and quality protocols. The contract is classified as a subcontract under NAICS code 541380, issued by the Department of Defense through the FA8220 Aflcmc Wndt organization, with performance centered in Nibley. Responses must be submitted by July 29, 2026, at 10:30 PM, following the solicitation released on June 30, 2026.

General Info

Non-destructive testing on aerospace valve components per DoD subcontract in Nibley, due July 29, 2026.

Agency

Department Of Defense → FA8220 Aflcmc WndtView Agency

NAICS

541380 - Testing Laboratories and ServicesView NAICS

Place of Performance

NIBLEY, UT, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJun 30

subcontract

Response DeadlineJul 29

Submission deadline

Response Deadline

07/29/2026, 10:30:00 PM UTCin 2 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → FA8220 Aflcmc Wndt

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → FA8220 Aflcmc Wndt

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Perform NDT methods (dye penetrant, magnetic particle, ultrasonic) on valve components pre- and post-repair to ensure structural integrity and compliance with aerospace safety standards.

Similar Contracts

Same NAICS industry code

Test Reporting and Quality Assurance SupportThis contract requires the execution of test reporting and quality assurance support in alignment with the DI-NDTI-80809B standard, encompassing the generation and validation of test reports to ensure compliance with accepted quality thresholds. The scope includes conducting sampling inspections and maintaining adherence to Acceptable Quality Level (AQL) criteria for critical, major, and minor defects, ensuring that all delivered products meet stringent defense quality expectations. The work must be performed under the oversight of the ASC Commodities Division within the Department of Defense and is structured as a subcontract to be awarded under a Total Small Business Set-Aside, limiting eligibility to small businesses as defined by the Small Business Administration. The NAICS code 541380 indicates the work falls under Other Scientific and Technical Consulting Services, emphasizing the need for specialized technical expertise in quality control processes. The solicitation was posted on July 27, 2026, with responses due by August 7, 2026, and performance location details are not specified, leaving flexibility for the vendor to determine operational logistics within the required compliance framework.

ASC COMMODITIES DIVISION

POSTED

about 9 hours ago

DEADLINE

26RFSQ72 Materials and Geotechnical ServicesWilliamson County is seeking qualified engineering firms to provide Materials Testing and Geotechnical Engineering services in support of various county programs including the Road Bond Program, Road and Bridge Division, Development Services & Drainage Division, and County Facilities. The county anticipates selecting approximately three firms to handle these services, though the Commissioners Court retains the discretion to choose more or fewer based on evaluation results. Firms must demonstrate expertise in testing materials and conducting geotechnical assessments to aid in the planning, design, and construction of infrastructure projects across the county. All responses are due by August 11, 2026, at 4:30 PM Central Time, with the solicitation posting on July 27, 2026. Proposals should be submitted through the Texas SmartBuy portal, and inquiries may be directed to Ann Sanchez, Joy Simonton, or Kerstin Hancock at the Williamson County Purchasing Office in Georgetown, Texas.

WILLIAMSON COUNTY

POSTED

about 12 hours ago

DEADLINE

Cathodic Protection Testing ServicesLoudoun County Sanitation Authority, operating as Loudoun Water, is soliciting sealed proposals for Cathodic Protection Testing Services under solicitation number 2026-051-1400002. The procurement is governed by the Virginia Public Procurement Act and requires all offers to be submitted exclusively through the IonWave online procurement system by the deadline of September 4, 2026, at 7:00 PM Eastern Time; late submissions will not be considered. No pre-proposal conference is scheduled for this solicitation, and all necessary information must be obtained directly through the provided online portal. The contract performance will take place within the state of Virginia, and all inquiries should be directed to Kelly Bodden, the primary point of contact, via email or phone. The solicitation was posted on July 27, 2026, and no set-aside or NAICS code information is specified, indicating an open competition for qualified contractors.

POSTED

about 12 hours ago

DEADLINE

in about 1 month

ICT Supply Chain Integrity and Tampering PreventionThe contract titled ICT Supply Chain Integrity and Tampering Prevention seeks to design and implement robust controls aimed at safeguarding information and communications technology products from tampering throughout the manufacturing and distribution lifecycle. This includes establishing secure logistics protocols, integrating firmware validation mechanisms to ensure authenticity and integrity at every stage, and deploying anti-counterfeiting technologies to thwart unauthorized replication or substitution of components. The emphasis is on end-to-end supply chain assurance, with requirements focused on preventing malicious modification, ensuring traceability, and maintaining the trusted status of ICT equipment from origin to final deployment. This subcontract opportunity, posted by the US Embassy Bangkok under the Department of State, is classified under NAICS code 541380 and requires responsive proposals by August 11, 2026. Performance location details are unspecified, but the work is intended to support the security and integrity of ICT systems deployed in diplomatic and government environments. The contract demands proven expertise in cybersecurity, hardware and software supply chain management, and compliance with federal standards for secure product handling. Proposers must demonstrate capability in executing multi-layered anti-tampering strategies that align with international best practices and meet the stringent security expectations of U.S. foreign missions.

US Embassy Bangkok

POSTED

about 14 hours ago

DEADLINE

M1DZ--Tri-Annual Emergency Power Supply System (EPSS) Load Test, Las Vegas VA Medical CenterThe Department of Veterans Affairs, through Network Contract Office 21, intends to award a sole source firm fixed price contract to Cummins Inc. for the tri-annual Emergency Power Supply System (EPSS) Load Test at the Las Vegas VA Medical Center, citing that Cummins is the only authorized and trained provider for Cummins Onan branded power generators. The government asserts no other third parties are qualified to perform this critical service, and therefore, no competitive solicitation is planned unless viable alternatives are demonstrated. Interested parties must submit a capability statement, their company information, and an official authorization letter from Cummins Inc. to Angela Gerlitzki at angela.gerlitzki1@va.gov no later than August 3, 2026, at 10 a.m. PST. The contract is classified under NAICS Code 541380 with a size standard of $19 million, and while responses will be reviewed, the government retains full discretion to proceed with the sole source award regardless of submissions. The work is set to occur at the Las Vegas VA Medical Center, with the contract solicitation number 36C26126Q0945 issued under the Mather, California-based office.

261-NETWORK Contract Office 21 (36C261)

POSTED

about 14 hours ago

DEADLINE

B--NEFSC DNA Next Generation SequencingThe contract encompasses the provision of next-generation DNA sequencing services for the National Oceanic and Atmospheric Administration’s Northeast Fisheries Science Center, with a base performance period from August 1, 2026, through July 31, 2027, and four optional one-year extension periods through July 31, 2031. Work is performed under a firm fixed-price structure across eight contract line items, with the primary deliverables including annual library preparation and metabarcoding of DNA extracts—300 in the base year and 350 in each option year—and Sanger sequencing of 200 samples annually. Delivery is FOB destination to the NOAA/NMFS facility in Milford, Connecticut, where government personnel will inspect and accept all work, ensuring compliance with the detailed Statement of Work, professional industry standards, and federal, state, and local regulations. Quality control protocols require BioAnalyzer or TapeStation assessments and equimolar pooling of samples, with performance evaluated using government-defined ratings of Exceptional through Unsatisfactory. The solicitation, issued under NAICS code 541380, is restricted to small business concerns including HubZone, SDVOSB, WOSB, EDWOSB, and 8(a) participants, with a size standard of $19 million in average annual receipts. Proposals must include a unique entity identifier, past performance information, technical approach, and pricing, with all submissions sent via email to the designated contracting officer by the July 28, 2026 deadline. Evaluation will follow a best-value trade-off approach, prioritizing technical approach and capability above price and past performance, without using numerical weights but applying qualitative confidence and favorability ratings. All contractors must be U.S. citizens or authorized residents, complete annual training in sexual assault and harassment prevention per NAO 202-1106, and submit invoices exclusively through the Treasury’s Invoice Processing Platform. No security clearances are required, but contractors are fully liable for damage to government property and must notify the government immediately of any schedule deviations. The total estimated value is approximately $99,000 for the base year and four option years, though no unit prices are formally listed in the contract document.

Department Of Commerce Noaa

POSTED

about 14 hours ago

DEADLINE

Pilot trials testing Laser-induced Breakdown Spectroscopy ProbesThe Department of Natural Resources Canada is seeking proposals to conduct pilot-scale testing of refractory probes designed for Laser Induced Breakdown Spectroscopy in a controlled electric arc furnace environment, with the goal of evaluating their performance, durability, and responsiveness under conditions that simulate actual steelmaking operations. The testing will be carried out using a custom-built pilot arc furnace capable of replicating the high-temperature, chemically aggressive environment of industrial steel production, ensuring that the probes are assessed under realistic and demanding operational parameters. Success in this trial will determine the viability of integrating LIBS probe technology into continuous steelmaking processes for real-time elemental analysis. Interested vendors must submit responses by the deadline of August 11, 2026, through the official Canada Buys portal, with all inquiries directed to Anik Samson, the Contracting Authority at anik.samson@nrcan-rncan.gc.ca. This solicitation, identified as NRCan-5000096476, was posted on July 27, 2026, and is open to all qualified suppliers without restriction based on set-aside categories. The work will be performed in Canada, and the results will directly inform the federal government’s strategic initiatives to modernize and optimize domestic steelmaking operations through advanced process monitoring technologies.

Department of Natural Resources (NRCan)

POSTED

about 21 hours ago

DEADLINE

Chemical Residue and Allergen Testing in and on Food Products for Canadian Food Inspection Agency (CFIA)This solicitation, numbered WS5434478581, seeks offers for analytical and laboratory services to test for chemical contaminants and allergens in food products, food crops, and tissues of food animals on behalf of the Canadian Food Inspection Agency. The requirement is structured into two distinct parts: Part A categorizes services by seven food groups—Dairy, Eggs, Fish & Seafood, Fresh Fruit & Vegetables, Honey, Meat, and Processed Products—while Part B organizes services around 24 specific testing programs such as 3-MCPD, Arsenic, BPA, Alternaria, and Benzopyrene. Offerors may respond to one or multiple food groups in Part A and/or one or more testing programs in Part B, with successful bidders receiving a single consolidated contract regardless of the number of categories or programs selected. The deadline for submission of all bids and supporting documentation is strictly 2:00 p.m. EST on September 9, 2026; any submissions received after this time will be deemed non-responsive, regardless of other平台 deadlines. Access to the full tender package requires a registered and approved SAP Ariba account linked to a verified Government of Canada profile. The solicitation is classified under NAICS code 541380 and is administered by the Government of Canada through Public Works and Government Services, with Sebastien Dupuis listed as the primary contracting authority. All submissions must be made via the CanadaBuys portal, and technical assistance for SAP Ariba access is available through the CanadaBuys Service Desk.

Department of Public Works and Government Services

POSTED

about 21 hours ago

DEADLINE

in about 1 month

Quality Inspection and Testing ServicesDallas Area Rapid Transit is seeking qualified third-party providers to perform quality inspection, non-destructive testing, and dimensional verification services to ensure compliance with technical specifications for ongoing projects. The contract, classified under NAICS code 541380 as a subcontract, requires precise execution of inspection protocols to validate material integrity, structural dimensions, and adherence to engineering standards without causing damage to components. Interested vendors must submit proposals by the deadline of July 29, 2026, at 7:00 PM, following the posting date of July 26, 2026. Services are expected to be performed in Texas, though specific location details are not provided. The opportunity is open to eligible subcontractors with demonstrated capability in industrial inspection and testing, and all responses must be submitted through the designated online portal.

Dallas Area Rapid Transit

POSTED

DEADLINE

Quality Inspection & Acceptance SamplingThe contract requires the performance of acceptance sampling and quality inspection services for cable assemblies in accordance with MIL-STD-1916, encompassing electrical, visual, and dimensional testing to ensure compliance with military standards. The work is classified as a subcontract under NAICS code 541380 and is being managed by the ASC Commodities Division within the Department of Defense. All inspections must be conducted at the specified place of performance in Barstow, California, with the ZIP code 92311-5015. The solicitation was posted on July 26, 2026, and responses are due by August 3, 2026, with no set-aside designation applied. Potential bidders must meet all technical and procedural requirements outlined in the referenced military standard and submit proposals through the designated DIBBS portal prior to the deadline.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Production Lot Testing (PLT) for O-Ring BatchesThe contract requires the execution of Production Lot Testing for O-ring batches to confirm compliance with military standards governing performance, durability, and packaging. Testing must be conducted in accordance with specified military specifications to ensure each batch meets rigorous operational requirements, and formal documentation of all test results and outcomes must be submitted as part of the deliverable. The work is scoped to take place in Tracy, California, with the zip code 95304-5000 designated as the place of performance. This subcontract falls under NAICS code 541380 and is issued by the Department of Defense through the LAND SUPPLY CHAIN office. The solicitation was posted on July 26, 2026, and responses are due by August 6, 2026. All testing activities must be completed and reported within the stated timeline to ensure timely validation and acceptance of the O-ring batches. The contract emphasizes adherence to precise technical benchmarks and the submission of formal, auditable reports to demonstrate full compliance with defense-related quality and reliability benchmarks.

LAND SUPPLY CHAIN

POSTED

DEADLINE

First Article Testing (FAT) ServicesThe contract requires the performance and documentation of First Article Testing for hose assemblies in accordance with FAR 52.209-3/4, encompassing material composition, dimensional accuracy, performance under operational conditions, and environmental resilience testing. All testing must be conducted with meticulous attention to specifications, and a formal, comprehensive report must be submitted to verify compliance with all required standards. The work falls under NAICS code 541380 and is structured as a subcontract under the FLUID HANDLING DIVISION of the Department of Defense, with proposals due by August 6, 2026. The testing must be completed to ensure the hose assemblies meet military-grade reliability and quality benchmarks before production or deployment.

FLUID HANDLING DIVISION

POSTED

DEADLINE

More opportunities from Department Of Defense → FA8220 Aflcmc Wndt

Same awarding agency

Legacy Attitude Heading & Reference System (AHRS) Component Replacements – Low-cost Avionics Modernization Program II (LAMP II)The U.S. Air Force is seeking industry input for the replacement of outdated Attitude Heading and Reference System (AHRS) components on the T-38 aircraft under the Low-cost Avionics Modernization Program II (LAMP II). This initiative aims to upgrade legacy avionics with modern, cost-effective solutions to enhance flight safety, reliability, and operational effectiveness without incurring high development or integration costs. The effort targets specific AHRS components that are no longer sustainable due to obsolescence, requiring new hardware and software that meet current military performance standards while ensuring compatibility with existing T-38 systems. The solicitation is open to contractors capable of delivering scalable, field-proven avionics that reduce lifecycle costs and support long-term fleet readiness. The contract opportunity is issued under NAICS code 334220 for Aerospace Product and Parts Manufacturing and is managed by the Air Force Life Cycle Management Center located at Hill Air Force Base, Utah. Responses are due by November 3, 2026, and the primary point of contact is Charity Simcox-Husa, with Mark Parker available for secondary inquiries. Performance of the work is anticipated to occur in Nibley, Utah, aligning with existing maintenance and logistics infrastructure. This sources-sought notice seeks industry capabilities, technologies, and past performance to inform the acquisition strategy and requirements definition for future procurement actions. The program reflects a broader Defense Department initiative to modernize aging platforms using affordable, commercial-off-the-shelf innovations.

Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

DEADLINE

Mexico F-5 Manufacture Surplus PartsThe contract solicitation FA822026RB006 seeks qualified contractors to manufacture or procure surplus spare parts for the F-5 aircraft in support of Foreign Military Sales (FMS) customers, with performance required at Nibley, Utah. The scope encompasses seven specific line items including a windshield panel, alternating current generator, gyroscope displacement component, stability augmentation system, landing gear control, control unit generator, and fire detection cable assembly, all to be delivered under firm fixed price arrangements. All parts must meet stringent quality standards, with new manufacturing requiring compliance with AS9100, AS9102, and AS9117 for aviation critical safety items, and aftermarket parts needing full traceability documentation—proof of manufacture by qualified or OEM sources, CAGE code, manufacturing date, and quality assurance acceptance—along with mandatory in-person visual inspection prior to submission, which strictly prohibits photo-based verification. Parts must be packaged and labeled per MIL-STD-2073 and MIL-STD-129, with unique item identification (UID) applied using MIL-STD-130 standards, including machine-readable data verified by automatic identification technology. Each delivery must include a signed Certificate of Conformance and functional test reports. The contract mandates adherence to a comprehensive set of Federal Acquisition Regulation (FAR) and Defense Federal Acquisition Regulation Supplement (DFARS) clauses covering liability, termination, default, security prohibitions, whistleblower rights, safeguarding of defense information, and prohibitions on procurement from sanctioned regions such as Xinjiang and Venezuela. Deviations from standard clauses using deviation 2026-O0038 apply to material requirements, security representations, and responsibility matters. Contractors must maintain current representations and certifications in SAM.gov, including compliance with restrictions on state-sponsored terrorism ownership and foreign government-controlled price adjustments. All work must be performed at the contractor’s or approved subcontractor’s facility without requiring a security clearance, while observing operational security per DoD and Air Force directives, environmental regulations, and OSHA safety standards. Electronic invoicing through WAWF is required, and proposals must be submitted by July 29, 2026, with no discussions anticipated; awards will be made based on an integrated assessment of technical approach and price to determine best value, with non-compliance rendering an offeror ineligible. The solicitation emphasizes a robust quality control program, supply discrepancy reporting timelines up to one year post-shipment, and full flow-down of all requirements to subcontractors.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

Mexico F-5 Repair and Return / OverhaulThe contract FA822026RB005, titled Mexico F-5 Repair and Return / Overhaul, is a firm fixed price procurement issued by the Air Force Life Cycle Management Center under the Department of Defense for the repair and overhaul of two specific aircraft components: the Canopy Seal Regulator and the Valve Ram Air, with a quantity of two each. Work must be completed and delivered within 120 calendar days from the date of award, with performance occurring in Nibley, Utah, and final delivery and acceptance taking place at Hill AFB, Utah. The contract is governed by a Performance Work Statement and detailed technical specifications in Attachments 1 and 3, which define the scope, deliverables, and quality standards including compliance with AS9110 and ISO 9001. Key deliverables include contractor progress reports, test and inspection reports, labor cost estimates, and variance requests, all submitted as part of the Contract Data Requirements List. Inspection and acceptance are the Government's responsibility and may occur either at the contractor’s facility or at the final delivery location under F.O.B. Origin terms, with WAWF being the exclusive system for electronic invoicing and payment requests. Evaluation for award is based on a trade-off process where technical approach is significantly more important than price, with the technical factor assessed across four subfactors: qualified repair source (critical, with an unacceptable rating disqualifying the offeror), technical ability, ramp-up timeline, and supply discrepancy reporting process. Technical risk is rated as low, moderate, high, or unacceptable, and may lead to award to a higher-priced offeror if technical merits justify the cost premium, making this a best-value, not LPTA, procurement. The solicitation requires adherence to multiple FAR and DFARS clauses including provisions on gratuities, improper activity, executive compensation reporting, and personally identifiable information control, with deviations noted for certain reporting clauses. Offerors must represent their size status and disclose UEI and CAGE codes if providing covered defense telecommunications equipment. No contract value is specified due to uncompleted pricing data, but payment processing will use DoDAAC codes and WAWF routing. All administrative roles—Contracting Officer, COR, and WAWF POC—remain to be populated by the issuing office, and no option periods or unique security requirements are stipulated beyond general compliance with existing federal regulations.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

Logistics and Transportation (F.o.b. Origin)The contract requires the secure transportation of repaired valve systems from the repair facility to Hill Air Force Base in Utah, with strict adherence to chain-of-custody procedures and secure handling protocols throughout transit. All shipments are governed by F.o.b. Origin terms, meaning the responsibility and risk transfer to the buyer upon departure from the origin point. The work must be executed under the NAICS code 484220, indicating specialized freight trucking services, and is classified as a subcontract within the Department of Defense logistics network. Performance is expected to be coordinated from Nibley, Utah, and all activities must comply with federal defense transportation standards to ensure integrity and accountability of sensitive military components. The contract opportunity was posted on June 30, 2026, with a deadline for responses on July 29, 2026, at 10:30 PM UTC.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Technical Data and Documentation Support (CDRL Management)The contract requires the compilation, formatting, and delivery of technical documentation aligned with Contract Data Requirements List (CDRL) obligations for the Department of Defense. This includes producing test reports, repair logs, and certification packages that meet strict DoD compliance standards, ensuring all deliverables are accurate, complete, and properly structured for governmental review and recordkeeping. The work is focused on technical data management and support, with an emphasis on adherence to standardized formats and procedural requirements dictated by defense contracting protocols. This is a subcontract under the NAICS code 541611, specifically for administrative and support services related to management consulting and technical documentation. The opportunity was posted on June 30, 2026, with a response deadline of July 29, 2026, at 10:30 PM Eastern Time. Performance is expected to take place in Nibley, and the contracting office is tied to FA8220 Aflcmc Wndt within the Department of Defense. There is no set-aside designation specified, and no point of contact information is provided in the public record.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

Precision Machining and Component FabricationThe contract involves the fabrication of replacement parts for valve systems requiring precision machining of critical components such as housings, seals, and regulators, all manufactured to meet original military specifications. The work is classified under NAICS code 332721, indicating it pertains to metal forging and stamping, with an emphasis on high-accuracy manufacturing required for defense applications. Performance of the work is designated to occur in Nibley, and the subcontract is issued by the Department of Defense under the FA8220 Aflcmc Wndt agency, reflecting its importance to military equipment maintenance and readiness. The solicitation was posted on June 30, 2026, with a strict response deadline of July 29, 2026, at 10:30 PM, leaving a limited window for qualified contractors to submit proposals. There is no set-aside designation listed, meaning the opportunity is open to all eligible vendors regardless of business size or classification. Although no point of contact details are provided, the official portal link gives access to additional submission requirements and technical specifications necessary for compliance. The contract is explicitly a subcontract, suggesting it is part of a broader procurement chain managed by a prime contractor under the Department of Defense's maintenance and logistics framework.

Precision Turned Product Manufacturing

POSTED

DEADLINE

Valve Ram Air System Overhaul and RepairThe contract involves the complete disassembly, inspection, repair, and reassembly of valve ram air systems to meet original equipment manufacturer and military specifications, ensuring full compliance with flight worthiness standards. All work must include rigorous testing and certification procedures to verify performance, reliability, and safety in operational environments. The scope demands precise adherence to technical requirements and documentation to maintain system integrity and regulatory compliance throughout the overhaul process. This subcontract is issued under the NAICS code 332994 and is associated with the Department of Defense, specifically the FA8220 Aflcmc Wndt agency, with performance required in Nibley. The solicitation was posted on June 30, 2026, with a firm deadline for responses on July 29, 2026, at 10:30 PM. No set-aside type is designated, and the contract is open to eligible subcontractors capable of fulfilling the highly technical overhaul work under stringent defense standards. The work environment and deliverables necessitate specialized expertise in aerospace valve systems and certified quality control processes aligned with military aviation requirements.

Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

DEADLINE

Battery Module SupplyThe contract pertains to the supply of five battery modules specifically designed for the electrical systems of F-5 aircraft, under a subcontract arrangement. The opportunity was posted on June 30, 2026, with a response deadline of July 29, 2026, at 10:30 PM Eastern Time. The North American Industry Classification System code 335911 applies, indicating the work falls under battery manufacturing. Performance of the contract is designated to take place in Nibley, and the contracting office is under the Department of Defense, specifically the FA8220 Aflcmc Wndt agency. No set-aside provisions or specific organization type designations are indicated, and the point of contact details are not provided within the data. The solicitation number is not assigned, and the full opportunity can be accessed through the provided SAM.gov link.

Storage Battery Manufacturing

POSTED

DEADLINE

Radiator SupplyThe contract pertains to the supply of a single radiator unit designed for the thermal management system of an F-5 aircraft, a critical component ensuring proper heat dissipation during operational conditions. The solicitation, issued under the NAICS code 333415 for other engine and engine parts manufacturing, is structured as a subcontract and is managed by the Department of Defense through the FA8220 Aflcmc Wndt office. The radiator must meet stringent military specifications for durability, performance, and compatibility within the existing aircraft thermal architecture, with delivery expected to support maintenance or upgrade cycles for the F-5 fleet. Performance of the contract is designated to take place in Nibley, indicating the physical location where the unit will be installed, tested, or integrated. Responses to the solicitation are due by July 29, 2026, at 10:30 PM Eastern Time, providing potential vendors approximately one month to prepare technical and commercial proposals. The absence of a set-aside designation means the contract is open to all eligible suppliers without restrictions based on business size or certification status. While no specific point of contact is listed, all inquiries and submissions must be processed through the official SAM.gov portal linked in the documentation. This contract represents a targeted procurement to maintain operational readiness and is likely part of a broader sustainment effort for legacy F-5 airframes still in active or support service.

Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

DEADLINE

Brake Caliper SupplyThe contract is for the supply of four brake calipers specifically designed for the F-5 aircraft landing systems under a subcontract arrangement. The opportunity was posted on June 30, 2026, with a firm deadline for responses set for July 29, 2026, at 10:30 PM. The North American Industry Classification System code 336320 indicates the work falls under aerospace product and parts manufacturing. Performance of the contract is tied to Nibley, though no additional location details are provided. The contracting agency is identified as FA8220 Aflcmc Wndt operating under the Department of Defense, reflecting military procurement context. No set-aside provisions or point of contact information are specified, and the solicitation number is absent, suggesting this may be an internal or non-publicly advertised subcontract opportunity. The full details can be accessed via the provided SAM.gov link.

Motor Vehicle Electrical and Electronic Equipment Manufacturing

POSTED

DEADLINE

Gyroscope SupplyThe contract specifies the supply of two gyroscopes for integration into the navigation and flight control systems of F-5 aircraft, under a subcontract arrangement. Performance is required at NIBLEY, with all deliverables expected to meet the technical standards necessary for military aviation operations. The North American Industry Classification System code 334511 indicates the work falls under the manufacturing of instruments and related products for navigation and control systems. The opportunity was posted on June 30, 2026, with a firm deadline for responses set for July 29, 2026, at 10:30 PM. The contracting entity is the Department of Defense, specifically through the FA8220 Aflcmc Wndt office, indicating this is a defense-related procurement aimed at sustaining the operational readiness of legacy aircraft platforms. All submission and compliance requirements must be addressed through the official SAM.gov portal prior to the stated deadline.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

DEADLINE

Generator SupplyThe contract involves the supply of two generators specifically designated for use on F-5 fighter aircraft, with all units required to meet either original equipment manufacturer specifications or approved aftermarket standards to ensure compatibility and performance. The work falls under NAICS code 335311, indicating it pertains to the manufacturing of electric lighting and wiring equipment, and is structured as a subcontract within the broader defense procurement framework. The contract is managed by the Department of Defense under the agency name FA8220 Aflcmc Wndt, and the performance location is tied to NIBLEY, though no further address details are provided. The solicitation was posted on June 30, 2026, with a firm response deadline of July 29, 2026, at 10:30 PM Eastern Time, allowing potential suppliers a one-month window to submit proposals. There is no stated set-aside designation, suggesting the opportunity is open to all eligible subcontractors without specific socioeconomic preferences. The contract is accessible via a SAM.gov link, which serves as the official platform for submission and tracking, but no point of contact information is included, implying inquiries should be directed through the SAM.gov portal or general agency communication channels.

Power, Distribution, and Specialty Transformer Manufacturing

POSTED

DEADLINE