Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Non-Destructive Testing (NDT) Services

Active

Federal

Response Deadline08/08/2026, 08:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract awards non-destructive testing services for aerospace components using industry-standard methods including X-ray, ultrasonic, dye penetrant, and magnetic particle inspection. All testing must be performed in accordance with rigorous quality standards, with complete and accurate documentation of results to ensure traceability and compliance with aerospace industry requirements. The successful bidder will also be responsible for developing and maintaining an Inspection Management System that supports efficient operation, data integrity, and regulatory adherence. The work is to be performed at a designated location in Coffeyville, with a response deadline of August 8, 2026. This is a subcontract under the Department of Defense, specifically managed by the FA8118 Afsc Pzabb office, and falls under NAICS code 541380 for scientific and technical consulting services.

General Info

Non-destructive testing for aerospace components at Coffeyville under DoD subcontract, due August 8, 2026.

Agency

Department Of Defense → FA8118 Afsc PzabbView Agency

NAICS

541380 - Testing Laboratories and ServicesView NAICS

Place of Performance

S Coffeyville, OK, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 24

subcontract

Response DeadlineAug 8

Submission deadline

Response Deadline

08/08/2026, 08:00:00 PM UTCin 13 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → FA8118 Afsc Pzabb

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → FA8118 Afsc Pzabb

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Conduct NDT methods (X-ray, ultrasonic, dye penetrant, magnetic particle) on aerospace components with documented results and IMS development.

Similar Contracts

Same NAICS industry code

Radioactive Materials Notification & MarkingThe contract requires the performance of radiological testing to identify materials with radioactive content exceeding specified thresholds, ensuring compliance with military standards for detection and response. All affected items must be properly marked in accordance with MIL-STD-129, which governs labeling and marking procedures for military shipments. Prior notification to the Contracting Officer is mandatory before any testing or marking activities commence, providing the government with opportunity to review and approve procedures. The work falls under NAICS code 541380, indicating it involves scientific and technical consulting services, and is classified as a subcontract under the Department of Defense’s ASC Commodities Division. The solicitation was posted on July 25, 2026, with responses due by July 31, 2026, and performance is expected to occur without a specified geographic location, though the work is tied to defense logistics and supply chain compliance.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

First Article and Production Lot Testing (FAT/PLT) ServicesThe contract requires the execution and documentation of First Article Testing and Production Lot Testing in strict adherence to military standards, with an uncompromising zero-tolerance policy for critical defects. All testing procedures must be thoroughly documented and reported in full compliance with applicable regulations, ensuring end-to-end traceability and quality assurance for defense-related components or systems. The work must be performed under a Small Business Set-Aside designation, reserved exclusively for total small business concerns, and is classified under NAICS code 541380, indicating it falls within the scope of professional, scientific, and technical services related to engineering and testing. The solicitation is managed by the ASC Commodities Division under the Department of Defense, with a response deadline of August 8, 2026, and a posted date of July 25, 2026. Performance location details are not specified, but the work is expected to support defense procurement efforts through rigorous quality control measures. This subcontract opportunity is aimed at qualified small businesses capable of delivering high-integrity testing services with meticulous documentation, where failure to meet standards could result in rejection of deliverables or termination of contract obligations.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Traffic Engineering and ITS IntegrationThe contract titled Traffic Engineering and ITS Integration requires the development and implementation of comprehensive traffic control plans, signalization systems where needed, dynamic message signs, and full integration with Intelligent Transportation Systems to support express lane operations. The scope encompasses engineering solutions that ensure safe, efficient, and coordinated traffic flow within the express lane network, with emphasis on real-time communication, adaptive signal control, and traveler information delivery through digital signage. All work must align with current transportation standards and operational goals for enhanced mobility and system performance. This is a subcontract opportunity posted by the Georgia Department of Transportation with a NAICS code of 541380, indicating it falls under Other Professional, Scientific, and Technical Services. The request for qualifications is open for responses until August 24, 2026, and the place of performance is within Georgia, though specific city or county details are not provided. All proposals must address technical capabilities, experience with ITS integration, and proven success in delivering similar traffic engineering solutions for high-volume or managed lane environments. Interested parties must submit their responses through the designated state portal by the specified deadline.

Department of Transportation-2

POSTED

DEADLINE

Quality Assurance and Compliance Testing ServicesThe contract awards third-party testing services to ensure signage compliance with Texas Department of Transportation and ASTM standards, focusing on retroreflectivity, color accuracy, adhesion, and environmental durability. These tests are critical for maintaining highway safety and visibility under varying weather and lighting conditions, and the vendor must demonstrate proficiency in standardized evaluation methods to validate sign performance over time. The solicitation is classified as a subcontract under NAICS code 541380, with a response deadline of August 14, 2026, and is managed by the Texas Department of Transportation. While specific location details are not provided, performance is expected across Texas, and the work supports ongoing infrastructure maintenance and regulatory adherence. The contract emphasizes strict compliance with technical specifications and documentation of results to meet state transportation safety requirements.

Texas Department of Transportation

POSTED

DEADLINE

First Article Testing (FAT) Coordination & ReportingThe contract requires the preparation and submission of First Article Test (FAT) reports in full compliance with E08 requirements, encompassing production validation, detailed inspection results, and comprehensive conformance documentation that aligns with military specifications. This involves ensuring all components and processes meet stringent defense standards before full-scale production, with each FAT report serving as critical evidence of product conformity and manufacturing reliability. The work must be meticulously documented to demonstrate adherence to technical and quality control benchmarks established for defense supply chain integrity. This is a subcontract under the Department of Defense with the agency name ASC SUPPLIER OPER AE AND AF DIV, classified under NAICS code 541380, indicating an engineering services focus. The solicitation was posted on July 24, 2026, and responses are due by August 7, 2026. The place of performance and point of contact details are not specified, but the work is tied to a DoD procurement system accessible via the provided DIBBS link. Participants must be prepared to deliver technically accurate and audit-ready FAT documentation within the designated timeframe to qualify for award.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Product Verification and First Article TestingThe contract requires the contractor to perform First Article Testing (FAT) and support Product Verification Testing (PVT) for defense-related products, encompassing both destructive and non-destructive evaluation methods to ensure compliance with technical specifications and quality standards. Testing activities are critical to validating design and manufacturing processes prior to production scale-up, with results directly influencing acceptance decisions for defense systems. The work is classified as a subcontract under NAICS code 541380, indicating it falls within engineering services, and is managed by the Defense Logistics Agency under the Department of Defense. The solicitation was posted on July 24, 2026, with responses due by August 3, 2026, and performance is expected to occur at an unspecified location under the agency’s jurisdiction. No set-aside preferences or specific geographic requirements are indicated, and the contract is accessible through the DIBBS portal for eligible subcontractors to respond.

Defense Logistics Agency

POSTED

DEADLINE

Quality Assurance and Testing Coordination (PVT Support)The contract requires the performance or coordination of Product Verification Testing (PVT) in full alignment with Defense Logistics Agency (DLA) standards, encompassing all phases from sample submission and test execution to the production of compliant, accurate reporting. This work is critical to ensuring that supplied products meet federal quality and performance benchmarks, with strict adherence to procedural and documentation requirements established by DLA. The scope demands expertise in testing protocols, quality assurance practices, and the ability to manage logistics and documentation timelines effectively. This subcontract is issued under the NAICS code 541380, which pertains to other scientific and technical consulting services, and is managed by the Land Supplier Operations SMSG within the Department of Defense. The solicitation was posted on July 24, 2026, with a response deadline of August 23, 2026. There is no specified set-aside designation, and performance location details are not provided. All work must be conducted in compliance with DLA directives, and successful bidders must demonstrate capability in coordinating complex testing activities across multiple supply chain elements to support DoD readiness and procurement integrity.

LAND SUPPLIER OPERATIONS SMSG

POSTED

DEADLINE

First Article Testing (FAT) for Defense Item (NSN 4720-01-581-9015)First Article Testing is required for the defense item identified by NSN 4720-01-581-9015 to ensure full compliance with specified technical requirements before any full-scale production begins. The testing must be conducted thoroughly and documented in formal reports submitted to the Defense Logistics Agency to validate that all design, material, and manufacturing standards are met. This subcontract task is critical to confirming product integrity and readiness for deployment within the Department of Defense supply chain. The solicitation is open for responses until August 3, 2026, with performance expected to be completed at the designated location in New Cumberland, Pennsylvania, zip code 17070-5002. The North American Industry Classification System code of 541380 indicates this work falls under scientific and technical consulting services, reflecting the engineering and quality assurance expertise needed to execute the testing. The contracting office is part of the Fluid Handling Division under the Department of Defense, and all deliverables must align with federal defense procurement protocols while meeting stringent quality benchmarks.

FLUID HANDLING DIVISION

POSTED

DEADLINE

Radioactive Material Labeling and PackagingThe contract requires specialized packaging and labeling of valves that involve or are exposed to radioactive materials, adhering strictly to MIL-STD-129 standards and all applicable federal nuclear safety regulations. This subcontract focuses on ensuring the safe handling, containment, and identification of radioactive components through approved methodologies and materials, with quality control measures built into every phase of packaging and labeling to meet stringent defense and nuclear industry requirements. The work must be performed to exacting technical specifications to guarantee regulatory compliance and operational safety. The solicitation, issued by DLA Dist San Joaquin under the Department of Defense, is open for responses until July 29, 2026, with a NAICS code of 541380 indicating engineering services. Performance is required at Tracy, California, with a zip code of 95304-5000. Interested parties must submit proposals before the deadline to be considered for award, and the work must align with the technical and security protocols necessary for handling radioactive materials in a defense context.

DLA DIST SAN JOAQUIN

POSTED

DEADLINE

Quality Assurance and NDT Inspection ServicesThe contract requires the provision of comprehensive quality assurance services focused on composite wearing rings, including non-destructive testing, dimensional verification, and material compliance assessments to ensure adherence to specified technical and performance standards. All testing and inspection activities must be conducted with precision and documented through formal certification of conformance and detailed test reporting, delivering verifiable proof of compliance for each component. The work is to be performed at the designated location in New Cumberland, Pennsylvania, with a zip code of 17070-5002, and is classified as a subcontract under the NAICS code 541380 for other scientific and technical consulting services. The solicitation was posted on July 24, 2026, and responses are due by July 29, 2026, with the contracting entity being the Department of Defense through its Maritime Supply Chain organization. While no specific point of contact or set-aside details are provided, the contract requires strict compliance with defense standards and mandates a documented, auditable inspection process to validate the integrity and material consistency of the composite wearing rings. The work is essential to ensuring the reliability of components used in critical maritime systems under the Department of Defense's procurement oversight.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Specialized Electronics Testing and Verification (PVT)The contract entails specialized product verification testing for electromagnetic relays to ensure full compliance with military environmental and electrical performance standards. This work is performed under a subcontract arrangement designated under NAICS code 541380 and is managed by the Defense Logistics Agency under the Department of Defense. The testing process is critical for validating the reliability and functionality of relays under extreme operational conditions mandated by defense specifications. The contract was posted on July 24, 2026, and is officially linked to the award record SPE7M226P3364, though specific performance location and point of contact details are not provided. The scope is focused exclusively on technical verification activities and does not include manufacturing, procurement, or general logistics support.

Defense Logistics Agency

POSTED

DEADLINE

Radioactive Materials Handling & Notification (If Applicable)Any equipment supplied under this contract that contains radioactive components must be preceded by advance notification, including full details on isotopes used, manufacturer information, and compliance with MIL-STD-129 for proper labeling. The requirement applies strictly to subcontractors delivering items with radioactive elements, and failure to provide accurate and timely documentation could result in rejection or non-compliance. This solicitation is a total small business set-aside under FAR 19.5, classified under NAICS code 541380, and is managed by the Department of Defense through the Construction & Equipment T & IFO EQ office. Responses are due by July 29, 2026, and the performance location is specified as Tracy, California, with a ZIP code of 95304-5000.

CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

DEADLINE

More opportunities from Department Of Defense → FA8118 Afsc Pzabb

Same awarding agency

Sub-Tier Supplier Qualification & ManagementThe contract seeks a qualified vendor to manage and qualify sub-tier suppliers that provide raw materials or specialty manufacturing processes, with a primary focus on ensuring all quality requirements are effectively flowed down through the supply chain. The vendor must establish, maintain, and update qualification matrices to verify supplier compliance with technical, operational, and quality standards, ensuring continuity and reliability in the supply of critical components. This engagement requires proactive oversight, risk mitigation, and documentation to support accountability and audit readiness across multiple tiers of sourcing. The opportunity is issued under the NAICS code 541611 for management consulting services and is sponsored by the Department of Defense through the FA8118 Afsc Pzabb office. Performance is expected to occur in Coffeyville, with responses due by August 8, 2026. The contract is designated as a subcontract and is open to eligible entities without specific set-aside restrictions. Bidders must demonstrate experience in supplier qualification processes, quality system compliance, and the ability to interface with defense industry requirements, ensuring all sub-tier suppliers meet stringent defense and aerospace standards.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

Quality Assurance & Technical Documentation SupportThe contract requires the development and maintenance of high-quality technical documentation including Process/Operation Sheets, Inspection Method Sheets, Material Data Records, and comprehensive technical data packages, all aligned with AS9100 standards and Department of Defense directives. The work focuses on ensuring accuracy, traceability, and compliance across all documentation to support aerospace and defense manufacturing processes. This subcontract is positioned under NAICS code 541330 and is tied to performance at S Coffeyville, with a deadline for responses set for August 8, 2026. The solicitation is issued under the FA8118 Afsc Pzabb entity within the Department of Defense and emphasizes strict adherence to regulatory and quality frameworks governing defense-related technical data.

Engineering Services

POSTED

DEADLINE

Brazing Services for Aerospace ComponentsThe contract seeks qualified subcontractors to perform precision brazing on aerospace components, ensuring high-integrity joints that meet stringent aerospace standards. Work must be executed in strict accordance with approved procedures and supporting technical data packages, emphasizing accuracy, consistency, and adherence to industry-specific quality benchmarks. The requirement is tied to a NAICS code of 332813, indicating specialized metal joining activities critical to defense and aviation systems. This subcontract opportunity is posted under the Department of Defense, specifically through the FA8118 Afsc Pzabb office, with performance required at the site in S Coffeyville. The solicitation was made public on July 24, 2026, and responses must be submitted no later than August 8, 2026. While no set-aside designation is specified, the nature of the work and the defense agency involvement suggest a focus on experienced contractors with proven capabilities in high-reliability brazing for aerospace applications. All participation must comply with the technical and regulatory expectations of DoD contracting practices.

Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

DEADLINE

Electroplating and Surface Finishing ServicesThe contract seeks providers of electroplating and surface finishing services for aerospace components, with specific focus on processes such as cadmium plating, chrome plating, and anodizing. All work must adhere to stringent environmental, safety, and quality control standards required by the aerospace industry, ensuring compliance with federal and defense-specific regulations. The services are to be performed at a designated location in Coffeyville, with the Department of Defense acting as the overarching agency under the FA8118 AFSC PZABB office. This is a subcontract opportunity categorized under NAICS code 332812 for Metal Finishing, with a response deadline of August 8, 2026. Proposals must demonstrate capability to meet high-precision performance requirements and maintain controlled environments to prevent contamination or non-compliance. The solicitation does not specify a set-aside status or point of contact, and all submissions must be submitted through the official SAM.gov portal prior to the stated deadline to be considered.

Metal Coating, Engraving (except Jewelry and Silverware), and Allied Services to Manufacturers

POSTED

DEADLINE

Welding Services for Critical Aerospace ComponentsPrecision welding services are required for critical aerospace components used in repair and remanufacture operations, with strict adherence to certified procedures, process control, and non-destructive testing validation to ensure structural integrity and compliance with aerospace standards. The work must be performed under rigorous quality assurance protocols, supporting mission-critical systems where dimensional accuracy and material compatibility are paramount. This subcontract opportunity is issued under the NAICS code 332999 and is scheduled for response by August 8, 2026, with performance expected to take place in Coffeyville. The contracting activity falls under the Department of Defense, specifically the FA8118 Afsc Pzabb office, and requires bidders to demonstrate proven capability in high-reliability welding environments aligned with defense and aerospace specifications.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

Heat Treatment Services for Aerospace ComponentsThe contract requires the provision of heat treatment services for aerospace components under strict adherence to AS9100 Rev C and NADCAP standards, ensuring full process validation and comprehensive traceability throughout all manufacturing stages to support government audit readiness. All work must meet the rigorous quality and documentation requirements expected in defense and aerospace applications, with emphasis on precision, consistency, and accountability in every step of the heat treatment process. The contract is classified as a subcontract under NAICS code 332813, with a posted date of July 24, 2026, and a response deadline of August 8, 2026. Performance will occur at a facility located in Coffeyville, and the contracting entity is the Department of Defense, specifically the FA8118 Afsc Pzabb office. While the solicitation number and point of contact are not provided, bidders must ensure full compliance with federal procurement protocols and demonstrate proven capability in handling aerospace-grade materials under regulated conditions.

Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

DEADLINE

Repair of F-16 Oxygen MonitorThe U.S. Air Force, through the FA8118 AFSC PZABB office located at Tinker AFB, Oklahoma, is seeking qualified sources to repair the F-16 Oxygen Monitor under solicitation number 1660014733548BO, posted on July 24, 2026, with responses due by August 8, 2026. This is a sources-sought notice, not a contract award, and is designed to identify and evaluate potential repair providers who can demonstrate technical and quality compliance for a critical aerospace component. The place of performance is S Coffeyville, Oklahoma, and all submissions must be delivered electronically as a single, bookmarked PDF file containing a complete Source Authorization Request (SAR) package organized into 21 technical elements labeled A through U. These elements cover every aspect of repair capability including technical data rights, repair procedures, tooling, personnel qualifications, quality history, configuration management, traceability, special processes like heat treatment and welding, first article inspection, nonconformance reporting, and government quality assurance compliance. No pricing information is included or evaluated as part of this submission; the process is purely a technical qualification to determine if a source meets minimum standards for approval to perform repairs. All respondents must comply with aerospace industry standards including AS9100 Rev C and NADCAP certifications for critical processes, as outlined in Appendix D, and are required to submit detailed Inspection Method Sheets, Process Ownership Summaries, and quality documentation without financial redactions removed. The government retains final authority for acceptance based on the completeness and accuracy of submitted technical data, with inspections and evaluations conducted at the source’s facility. There are no specified packaging, markings, or delivery requirements beyond electronic submission, and no FOB or payment terms are provided because this is a pre-solicitation activity. The evaluation is pass/fail in nature with no numerical weighting, and failure to adequately address any single element may result in disqualification. The solicitation requires the submission of company name, address, CAGE code, and size status, but no socioeconomic certifications or security clearance requirements are referenced. The point of contact for inquiries is Morgan McGarity at morgan.mcgarity@us.af.mil, and all documentation must align with AFMCI 20-102 and other DoD technical directives governing the repair of critical safety and application items.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

Overhaul of E-3 Electro-Mechanical ActuatorThis contract is a three-year firm fixed price indefinite delivery indefinite quantity (IDIQ) award for the overhaul of the E-3 Electro-Mechanical Actuator, structured as a total small business set-aside under NAICS code 336413. The scope requires contractors to remanufacture end items to a like-new condition through comprehensive disassembly, cleaning, inspection, rehabilitation, re-assembly, testing, and finishing, adhering strictly to technical orders, performance work statements, and military packaging standards such as MIL-STD-130, MIL-STD-129, and MIL-STD-2073-1. All work must be performed using the contractor’s own facilities, labor, equipment, and expertise, with full responsibility for packing, preservation, and compliance with unique identification (IUID) marking requirements as per DFARS 252.211-7003. The contract includes three line items with minimum and maximum quantities of one to sixteen units each for the electro-mechanical actuator, minor overhaul, and major overhaul services, with an ordering period extending five years beyond the contract’s effective date or until the maximum quantity is reached, whichever comes first. Award will be made to the offeror with the lowest total evaluated price, with price as the sole evaluation factor and no technical or past performance scoring. Proposals must meet strict pass/fail gates including completeness, qualification as an approved source via a Source Approval Request submitted electronically through DoD SAFE to the Tinker AFB Small Business Office, adherence to all terms and conditions, and submission of a completed DD Form 2345 with technical data requests sent to designated government points of contact. Access to drawings requires a DD Form 2875 to request ATeam access, and all shipments must include a DD1348-1, though it will not be signed by DCMA quality assurance representatives. Contractors assume full financial risk for any pre-award activities and must not begin work until a fully executed contract is received. Government property furnished for repair does not entitle the contractor to price adjustments if quantities differ from estimates. Units determined beyond overhaul limits cannot be counted as production, and contractors must immediately notify the administrative contracting officer in writing if an item is deemed non-reparable. Compliance is mandatory for quality systems conforming to ISO 9001-2015 and AS9100, cybersecurity controls per DFARS 252.204-7

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

Technical Data Package (TDP) and Engineering SupportThe contract entails the development and maintenance of comprehensive technical documentation for remanufactured units, including engineering drawings, repair procedures, and configuration control systems to ensure accurate and consistent technical data throughout the product lifecycle. This work supports the creation of a Technical Data Package (TDP) essential for sustaining and rebuilding components, requiring adherence to precise engineering standards and strict configuration management practices. The effort is critical to maintaining operational readiness and interoperability of remanufactured systems under Department of Defense oversight. This is a small business set-aside subcontract under NAICS code 541330, classified as a Total Small Business Set-Aside, exclusively reserved for qualified small businesses. The solicitation was posted on July 22, 2026, with a response deadline of August 14, 2026. Performance is required at a location in Coffeyville, Kansas, with a ZIP code of 73145, and the contracting authority is the Air Force Life Cycle Management Center under the Department of Defense. All deliverables must meet rigorous technical and compliance requirements to support military maintenance and sustainment operations.

Engineering Services

POSTED

DEADLINE

Precision Machining and Component FabricationThis contract involves the manufacture or repair of high-reliability internal valve components, including housings, springs, and seals, that must meet stringent aerospace-grade material specifications and tight dimensional tolerances. The work requires precision machining and component fabrication capabilities to ensure performance under extreme conditions, typical of defense and aerospace applications. All components must be produced to exacting standards ensuring durability, consistency, and operational integrity in critical systems. The solicitation is a total small business set-aside under the SBA program, exclusively available to small businesses as defined by the NAICS code 332722 for metal forging and stamping. It is issued by the Department of Defense under the FA8118 Afsc Pzabb office, with performance required at a location in Coffeyville, Oklahoma, zip code 73145. The opportunity was posted on July 22, 2026, and responses are due by August 14, 2026, at 8:00 PM Eastern Time. Interested parties must qualify as small businesses and be prepared to demonstrate technical expertise in producing components with the required precision and material integrity for high-reliability applications.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

DEADLINE

Aerospace Component Testing and Inspection ServicesThe contract calls for independent non-destructive evaluation, functional testing, and final inspection of remanufactured safety relief valves to verify airworthiness and ensure full compliance with performance standards. These services are critical to maintaining the integrity and reliability of aerospace components used in military and defense systems, requiring rigorous adherence to technical specifications and quality control protocols. The work must be performed by a qualified entity capable of executing precise inspection techniques without compromising the structural or operational functionality of the valves. This is a small business set-aside subcontract under NAICS code 541380, reserved exclusively for small businesses as defined by the SBA, and is managed by the Department of Defense through the FA8118 Afsc Pzabb office. The place of performance is designated as Coffeyville, Kansas, with a zip code of 73145. The solicitation was posted on July 22, 2026, and responses are due by August 14, 2026, at 8:00 PM Eastern Time. All participants must meet stringent technical and regulatory requirements to ensure that the remanufactured valves meet the high operational standards demanded by aerospace applications.

Testing Laboratories and Services

POSTED

DEADLINE

Remanufacture of F-15 Fuel Tank Safety Relief ValveThe contract calls for the complete remanufacturing of fuel tank safety relief valves for the F-15 aircraft, encompassing all phases from disassembly and detailed inspection to repair or replacement of deficient components, reassembly, and rigorous testing to meet military specifications. This work is critical to ensuring the safety and operational readiness of F-15 airframes by restoring these valves to original performance standards. The procurement is structured as a subcontract under a Small Business Set-Aside, specifically designated as a Total Small Business Set-Aside per FAR 19.5, meaning only small businesses are eligible to bid. The associated NAICS code 332994 identifies this as manufacturing other fabricated metal products, aligning with precision aerospace component rebuilding activities. The solicitation was posted on July 22, 2026, with a response deadline of August 14, 2026, at 8:00 PM. Performance of the work is required at a specified location in Coffeyville, Oklahoma, with a zip code of 73145. The contracting office is listed as FA8118 Afsc Pzabb under the Department of Defense, indicating this is a U.S. Air Force program. There are no details provided regarding point of contact or specific delivery timelines beyond the completion timeframe implied by the response deadline, and the contract does not specify any additional deliverables beyond the remanufactured valves meeting military requirements.

Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

DEADLINE