Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

NON-NSN ITEM

Active
SPE7L1-26-T-908TFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract is for the procurement of a single non-NSN item with CAGE code 60821 and part number R140P02 from Ohio Medical Corporation, located in Gurnee, Illinois. The item, identified by purchase request 7017730519, is a single unit to be delivered within five days of contract award, with delivery terms set at FOB destination. The quantity is fixed at one unit with zero variance allowed, and acceptance occurs at the destination point upon inspection. Packaging must strictly comply with ASTM D3951 and MIL-STD-129 for marking and labeling, with palletization adhering to DLA’s RP001 packaging requirements. The unit of issue is each, and packaging details specify a QUP of 001. The delivery address is W34GMT at Building 5505A, Fort Campbell, Kentucky, with the same location designated for marking and freight shipment. The shipment must be dispatched via traceable freight methods, explicitly prohibiting parcel post. The original required delivery date is August 3, 2026, with no specified need ship date. This procurement falls under contracting vehicle SPE7L1-26-T-908T, administered by the Department of Defense’s Land Supply Chain, and is subject to all applicable DLA Master List of Technical and Quality Requirements. Contact for inquiries is Darrell Pannell, with government-only identifiers including IPD 02 and DIC A0B.

General Info

One unit R140P02 from Ohio Medical, FOB destination, delivery to Fort Campbell by August 3, 2026, ASTM D3951 and MIL-STD-129 packaging.

Agency

Department Of Defense → LAND SUPPLY CHAINView Agency

NAICS

339999 - All Other Miscellaneous ManufacturingView NAICS

Place of Performance

BLDG 5505A WICKHAM AVE, FORT CAMPBELL, KY, 42223-5000, US

Set-Aside

NONE

Documents

(1)

SPE7L1-26-T-908T.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → LAND SUPPLY CHAIN
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → LAND SUPPLY CHAIN
View Agency Profile
Office AddressUS
Contacts
Darrell Pannell
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
Non-NSN Team
CAGE/PN: 60821 / R140P02
Ohio Medical Corporation DBA Ohio Medical Corp Ltd U.K Ohio Medical Corporation USA GURNEE IL 60031-2489 1111 Lakeside Dr
Phone: 8478550500
NO EXCEPTION DATA
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017730519 0001 EA 1.000
CAGE/PN:60821 R140P02
DELIVERY (IN DAYS):0005
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
BULK BREAK POINT:
W34GMT
0129 CS BN CO A COMPOSITE
AWCF SSF
BLDG 5505A WICKHAM AVE
FORT CAMPBELL KY 42223-5000
US
SPE7L1-26-T-908T
SECTION B
PR: 7017730519 PRLI: 0001 CONT’D
RDD(3-POS RDD)/NMCS SHIPMENT. SHIP BY FASTAST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
W34GMT
0129 CS BN CO A COMPOSITE
AWCF SSF
BLDG 5505A WICKHAM AVE
FORT CAMPBELL KY 42223-5000
US
MARKFOR
W34GMT
0129 CS BN CO A COMPOSITE
AWCF SSF
BLDG 5505A WICKHAM AVE
FORT CAMPBELL KY 42223-5000
US
M/F: (TCN) W51NLQ62150001
RDD: N
PROJ: TP 1
SUPP ADD: W34GMT SIG: J
FOR GOVERNMENT USE ONLY: (IPD) 02
DIC: A0B DIST: ADV: FC: 61
Need Ship Date:00/00/0000 Original Required Delivery Date:08/03/2026
SPE7L1-26-T-908T NSN/Part Number: 60821R140P02 Quantity: 1 EA Purchase Request: 7017730519QTY: 1 Delivery: 5 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 339999
New
DIBBS
Military-Compliant Marking and LabelingThis contract requires compliance with J-STD-609 and MIL-STD-129 standards for the precise application of unit and container markings, ensuring all items are properly labeled with Pb-free status indicators and machine-readable barcodes to meet military logistics requirements. The work must be performed at the designated place of performance in New Cumberland, Pennsylvania, with delivery and marking executed in full alignment with Department of Defense specifications to ensure traceability, inventory accuracy, and supply chain interoperability. The solicitation is structured as a subcontract under NAICS code 339999, with a response deadline of August 14, 2026, and was posted on August 3, 2026. The contracting activity falls under the Maritime Supply Chain organization within the Department of Defense, emphasizing the critical nature of standardized labeling for military hardware and components. Contractors must have proven capability in executing military-grade marking procedures, adhere strictly to technical directives, and ensure all labels are durable, legible, and compatible with automated scanning systems in defense logistics environments.
MARITIME SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 339999
New
DIBBS
NON-NSN ITEM
Solicitation # SPE7L1-26-T-908U
The contract pertains to a non-NSN item with CAGE code 4FM89 and part number 770011-01, requiring the delivery of one unit with a total price of zero as no unit price is specified. Delivery is to be made within five days of contract award, FOB destination, with no tolerance for quantity variance. Inspection and acceptance occur at the destination, and packaging must comply with ASTM D3951 unless overridden by DLA’s Master List of Technical and Quality Requirements. All packaging and labeling must adhere to MIL-STD-129, with palletization following DLA’s RP001 packaging standards. The item is to be shipped via traceable means, explicitly excluding parcel post, to the delivery address at Fort Campbell, Kentucky, under the W34GMT designation. The shipment is identified as RDD/ NMCS with a TCN identifier W51NLQ62150003 and project code TP 1. The original required delivery date is August 3, 2026, and the solicitation number is SPE7L1-26-T-908U, issued under the Department of Defense’s Land Supply Chain with a NAICS code of 339999. The primary point of contact is Darrell Pannell, and the contract is marked for government use only with specific administrative identifiers applied.
LAND SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 339999
New
DIBBS
NON-NSN ITEM
Solicitation # SPE7L1-26-T-907X
The contract pertains to a single non-NSN item with CAGE code 62100 and part number 15047488, supplied by KOPPERS CO INC CONTAINER MACHINERY DIVISION located in Glen Arm, Maryland. The item is required in a quantity of one unit, with a total price based on a unit price for a single ea. Delivery is specified to be completed within five days of contract award, with FOB destination as the delivery term, meaning the supplier assumes all risk and cost until the item reaches the designated destination. Inspection and acceptance both occur at the destination, with no variance allowed in quantity—zero percent plus or minus. Packaging must comply with ASTM D3951, but all DLA Master List of Technical and Quality Requirements take precedence, and labeling must follow MIL-STD-129. Packaging must be palletized per RP001 DLA Packaging Requirements for Procurement, with the unit of issue and quantity per unit pack as defined in the contract. The delivery address is N62792 CVN/SSN MATERIAL SUPPORT at 500 West Park Lane, Hampton, VA 23666-5027, and shipment must be sent by the fastest traceable method; parcel post is strictly prohibited. The required delivery date is August 3, 2026, with no need ship date specified, and the solicitation number is SPE7L1-26-T-907X. The contracting office is under the Department of Defense, Land Supply Chain, and the primary point of contact is Darrell Pannell. For government use, the item is identified with DIC A3B, funding code XP, and project code ON9 TP 1.
LAND SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 339999
New
DIBBS
NON-NSN ITEM
Solicitation # SPE7L1-26-T-908R
The contract is for a single unit of a non-NSN item with CAGE code 4FM89 and part number 770011-01, under solicitation SPE7L1-26-T-908R, issued by the Department of Defense through the Land Supply Chain. The item has a fixed quantity of one unit with no variance allowed, and must be delivered within five days of contract award to Fort Campbell, Kentucky, with FOB destination terms. Inspection and acceptance both occur at the delivery point. Packaging must comply with ASTM D3951 and MIL-STD-129 labeling standards, and palletization must follow DLA’s RP001 requirements. The unit of issue is each (EA), and the total price is based on the listed unit price. The shipment must be dispatched via traceable means, excluding parcel post, and marked for W34GMT at Building 5505A, Fort Campbell, with the tracking control number W51NLQ62150004. The required delivery date is August 3, 2026, and the contract includes government-specific identifiers for processing and distribution. All DLA Master List of Technical and Quality Requirements supersede any general standards.
LAND SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 339999
New
DIBBS
REPAIR KIT, HELMET
Solicitation # SPE1C1-26-T-1572
The contract pertains to the procurement of a repair kit for helmets, identified by part number 70-ESS-PRM and NSN 8470017293493, with a quantity of ten units to be delivered within twenty days of order placement. The delivery is FOB destination, and acceptance and inspection will occur at the destination point with no variance allowed in quantity. Packaging must comply with ASTM D3951 and fully adhere to MIL-STD-129 marking and labeling requirements, while palletization follows DLA’s RP001 packaging standards. The unit of issue is each, and each unit pack contains one kit, as specified. Delivery is to be made to the designated government freight address at Anderson AFB in Yigo, Guam, with a final parcel post destination at APO AP 96543-4052. The required delivery date is August 5, 2026, and transportation logistics are governed by DLA procedural notes C19 and C20. The contract falls under solicitation SPE1C1-26-T-1572, issued by the Department of Defense through C and T Supply Chain, with primary point of contact Jennifer Scarpello available for inquiries.
C AND T SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339999
New
DIBBS
NON-NSN ITEM
Solicitation # SPE7L1-26-T-908S
The contract pertains to a single non-NSN item with CAGE code 60821 and part number R140P02, issued by the Department of Defense through the Land Supply Chain under solicitation SPE7L1-26-T-908S. The item, quantity one unit, must be delivered within five days of contract award to Fort Campbell, Kentucky, with FOB destination terms and no tolerance for quantity variance. Delivery must be made using traceable freight methods, excluding parcel post, and the packaging must comply with ASTM D3951 and MIL-STD-129, with palletization following DLA’s RP001 standards. All packaging must be marked and labeled exactly as specified, including the Unit of Issue and Quantity per Unit Pack. The destination for delivery, marking, and freight shipping is identical: W34GMT, 0129 CS BN CO A COMPOSITE, BLDG 5505A, WICKHAM AVE, FORT CAMPBELL KY 42223-5000, and the inspection and acceptance points are both at the destination. The required delivery date is August 3, 2026, with no need ship date specified, and the contract includes a government-only identifier and distribution code. The supplier, Ohio Medical Corporation based in Gurnee, Illinois, is obligated to meet all technical, quality, and logistical requirements without exception.
LAND SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 339999
New
Federal
Kinesiology Tape SupplyThe contract seeks the supply of RockTape or an equivalent kinesiology tape in 1-inch and 2-inch widths, with each roll measuring 16.4 yards, under a Small Business Set Aside designation for total small business participation. The opportunity is classified as a subcontract under NAICS code 339999, indicating a non-specific medical equipment manufacturing category, and is managed by the Department of Defense through its W7N8 Uspfo Activity Wiang 115 office. Proposals must be submitted by August 24, 2026, at 9:30 PM, with the contract performance location designated as Madison, Wisconsin, zip code 53704. The solicitation was posted on August 3, 2026, and interested parties are directed to the SAM.gov portal for further details and submission requirements.
W7N8 Uspfo Activity Wiang 115

POSTED

about 22 hours ago

DEADLINE

in 20 days
View Details
NAICS: 339999
New
Federal
Cupping Therapy Equipment SupplyThe contract involves the supply of 8-piece RockPods Cupping Sets featuring medical-grade silicone cups designed for tissue manipulation therapy, intended for use in therapeutic applications. The solicitation is structured as a subcontract under a Small Business Set Aside designation, exclusively available to qualified small businesses, with the NAICS code 339999 indicating it falls under Miscellaneous Manufacturing. The opportunity was posted on August 3, 2026, with a strict response deadline of August 24, 2026, at 9:30 PM Eastern Time. Performance of the contract is required to be fulfilled at a designated location in Madison, Wisconsin, with a zip code of 53704. The awarding agency is the Department of Defense, specifically under the W7N8 Uspfo Activity Wiang 115, though no further organizational or contact details are provided. All bids must comply with federal procurement requirements and meet the technical specifications for medical-grade materials and kit completeness.
W7N8 Uspfo Activity Wiang 115

POSTED

about 22 hours ago

DEADLINE

in 20 days
View Details
NAICS: 339999
New
Federal
Tables
Solicitation # W911S226U3816
The contract titled Tables, identified by solicitation number W911S226U3816, is a combined solicitation issued by the Department of Defense through the Office of W6QM Micc-Ft Drum, located at Fort Drum, New York, with a place of performance in Alexandria, Virginia, under zip code 22211. It is designated as a Small Business Set Aside - Total, meaning only small businesses are eligible to compete. The North American Industry Classification System code has been amended to 339999, reflecting a broad manufacturing category for miscellaneous manufacturing, and the full list of required items is detailed in the attached solicitation documentation. The opportunity was posted on August 3, 2026, with a response deadline of August 12, 2026, at 4:55 AM Eastern Time. Primary point of contact for inquiries is Anthony Zyla, reachable via email at anthony.j.zyla.civ@army.mil or by phone at 703-614-0476, and additional information is accessible through the official SAM.gov portal.
W6QM Micc-Ft Drum

POSTED

about 22 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339999
New
Federal
Amerex Model 775 Fire Extinguishers
Solicitation # F3N6116176A001
This solicitation, numbered F3N6116176A001, seeks the procurement of twenty 150lb wheeled clean-agent fire extinguishers, specifically the Amerex Model 775 (NSN 4210-01-610-6985), to support flightline operations at Ramstein Air Base within the Kaiserslautern Military Community in Germany. The requirement is strictly brand-specific, with no alternatives permitted, due to standardized training, maintenance protocols, and compatibility with existing USAFE infrastructure as mandated by Technical Order 00-25-172. Delivery must be made under DAP (Delivery at Place) terms, meaning the contractor assumes all risks and costs until the extinguishers are delivered to the specified destination. The solicitation has been amended to extend the response deadline to August 7, 2026, and includes supplemental documentation such as the Salient Characteristics, Brand Name Justification, and Questions & Answers to clarify expectations. The contract is to be award on a best-value basis, considering both technical compliance and price, using simplified acquisition procedures under full and open competition, although no funds are currently available and no award will be made until appropriations are secured. The contractor must comply with a comprehensive set of federal and defense-specific clauses, including those governing tax relief under German VAT law, customs exemptions, electronic invoicing via WAWF, cybersecurity requirements per NIST SP 800-171, safeguarding covered defense information, whistleblower protections, and prohibitions on convict labor and child labor. Special attention is required for tax documentation, including the submission of an *Abwicklungsschein fuer abgabenbegunstigte Lieferungen/Leistungen* or equivalent to qualify for VAT relief. The contract also includes unique anti-trafficking compliance obligations mandatory for overseas contracts exceeding $700,000, requiring a detailed compliance plan covering employee recruitment, wage transparency, housing standards, no-recruitment-fee policies, return transportation, and annual certifications. The offeror must provide documentation verifying the extinguishers are new, not remanufactured, and come with a valid manufacturer’s warranty, while ensuring all markings include DoDAAC codes and meet government shipping and labeling standards. Proposals must be submitted electronically via email by the stipulated deadline, and contractors must be registered in SAM.gov. All pricing shall be in USD, and there are no set-asides applicable in Germany
FA5613 700 Cons Pk

POSTED

about 22 hours ago

DEADLINE

in 3 days
View Details
NAICS: 339999
New
Federal
Flash Steam Recovery Vessel
Solicitation # W911S226U3909
The contract titled Flash Steam Recovery Vessel, identified by solicitation number W911S26U3909, was posted on August 3, 2026, with a response deadline of August 10, 2026, at 6:00 PM Eastern Time. It is a combined solicitation set aside exclusively for small businesses under the SBA’s Total Small Business Set Aside program, meaning only eligible small businesses may bid. The NAICS code has been amended to 339999, which categorizes the procurement under Other Miscellaneous Manufacturing, reflecting a shift in the classification of the goods or services being procured. The contract is managed by the Department of Defense through the W6QM Micc-Ft Drum office located in Fort Drum, New York, with the primary point of contact being Mike Fabry, reachable via email or phone for inquiries. Performance is expected to occur at a location with a ZIP code of 74501, though the city and state are unspecified in the provided data. The contract was issued under the Office of the Department of Defense, indicating this is a military procurement likely tied to energy recovery or steam system optimization at a DoD installation. Interested parties must ensure their small business eligibility and align their submissions with the amended NAICS code to comply with the solicitation requirements. All proposals must be submitted before the stated deadline to be considered, and further details or documentation can be accessed through the provided SAM.gov link.
W6QM Micc-Ft Drum

POSTED

about 22 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339999
New
Federal
Sweeper
Solicitation # W911S226U3906
A single M6 Avalanche street sweeper with a 5.0 cubic feet stainless steel hopper, a 134 inch sweeping patch, 350 gallon water capacity, and front, middle, and rear brooms including a gutter broom with tilt and control panel is being solicited under contract W911S226U3906. The requirement is a Small Business Set Aside, classified under NAICS code 339999, and is managed by the Department of Defense through the W6QM Micc-Ft Drum office located in Fort Drum, New York. The solicitation was posted on August 3, 2026, andResponses are due by August 12, 2026, at 4:55 AM Eastern Time. The point of contact for inquiries is Anthony Zyla, reachable via email at anthony.j.zyla.civ@army.mil or by phone at 703-614-0476. Performance of the contract is expected to occur at a location with a zip code of 22211.
W6QM Micc-Ft Drum

POSTED

about 22 hours ago

DEADLINE

in 8 days
View Details

More opportunities from Department Of Defense → LAND SUPPLY CHAIN

Same awarding agency

NAICS: 541611
New
DIBBS
Small Business Subcontracting and Representation Support
Administrative Management and General Management Consulting Services

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 493190
New
DIBBS
Military Packaging and Marking Services
Other Warehousing and Storage

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 541690
New
DIBBS
Hazardous Materials Compliance and Labeling Services
Other Scientific and Technical Consulting Services

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334510
New
DIBBS
Exhaust Gas Sensor Supply and Manufacturing
Electromedical and Electrotherapeutic Apparatus Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 000000
New
DIBBS
Unable to Retrieve Subcontract Opportunities

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 541990
New
DIBBS
Small Business Subcontracting Support
All Other Professional, Scientific, and Technical Services

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 541512
New
DIBBS
Cybersecurity Compliance (NIST SP 800-171)
Computer Systems Design Services

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 483111
New
DIBBS
Domestic and International Transportation (FOB Destination)
Deep Sea Freight Transportation

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 322291
New
DIBBS
Military-Compliant Packaging and Preservation
Sanitary Paper Product Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 561910
New
DIBBS
Hazardous Materials Packaging and Labeling
Packaging and Labeling Services

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332999
New
DIBBS
Parts Kit Manufacturing and Assembly
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333618
New
DIBBS
O-RING
Solicitation # SPE7L1-26-T-909V
This contract specifies the procurement of 92 O-RINGS with NSN/Part Number 5331-01-721-6739 under solicitation SPE7L1-26-T-909V, with a response deadline of August 14, 2026, and a delivery requirement of three days after award. Technical and quality requirements referenced in the contract are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision controlled by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless amended. Packaging must comply with DLA standards, and all supplies must be free of asbestos and Class I ozone-depleting chemicals, with any substitutions requiring prior approval unless explicitly authorized by specifications. Government identification must be removed from non-accepted supplies. The place of performance is New Cumberland, PA, 17070-5002, and the contract is managed by the Department of Defense’s Land Supply Chain under NAICS code 333618. Primary point of contact is Kelly Day, reachable at kelly.day@dla.mil or 614-693-9944.
Other Engine Equipment Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details