This Government Contract opportunity from Department Of Defense was posted on July 14, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Nonelectrical Wire Supply (Carbon Steel, Galvanized, or Alloy Wire)

Closed

Federal

Submission Closed07/21/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 331221

New

DIBBS

Supply of Aluminum Alloy Alclad SheetsThis HUBZone set-aside subcontract involves the supply of Aluminum Alloy Alclad sheets to prime contractors supporting DLA Troop Support Metals contracts for the Department of Defense in Warner Robins. The required materials must feature a cladding thickness of 0.002 inches on both sides, with overall dimensions of 0.100 inches in thickness, 48.00 inches in width, and 168.00 inches in length. All sheets must be delivered in whole feet lengths according to the specified minimum and maximum length requirements. Performance for this contract is centered at Robins Air Force Base, and interested parties must adhere to the response deadline of November 9, 2026.

POSTED

DEADLINE

Supply of Steel Comp 321 Metal SheetsThis subcontract through the Department of Defense DDSP New Cumberland Facility involves the supply of four specialized Steel Comp 321 metal sheets. These sheets must be cold rolled with a sheared edge and 2D finish, solution heat treated to a thickness of 0.040 inches, and measure 48 inches wide by 144 inches long. The materials are intended for prime contractors supporting DLA Troop Support Construction and Equipment contracts. To ensure quality compliance, the provider must furnish Mill-Material Certification for the delivered goods. The performance of this contract is centered in New Cumberland, Pennsylvania, under NAICS code 331221. Interested parties should note the response deadline of November 9, 2026.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Supply of Roller-Aft, Engine InstallationThis subcontract, issued by the Department of Defense through Construction and Equipment Manufacturing and Construction, requires the delivery of one Roller-Aft Engine Installation unit for prime contractors supporting DLA Troop Support. The selected provider must manufacture or source the part according to NSN 1730014225262 and adhere to strict technical specifications, including physical identification and bare item marking per RQ017, packaging per RP001 DLA requirements, and the removal of non-accepted government identification as specified in RQ011. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 331221, with the place of performance located in New Cumberland, Pennsylvania. Interested parties must submit their responses by the deadline of November 9, 2026.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Supply of Welding Electrodes (NSN 3439011804976)This subcontract involves the manufacture or sourcing of welding electrodes for prime contractors supporting Department of Defense supply contracts through the DDSP New Cumberland Facility. The electrodes must strictly adhere to NSN 3439011804976 and AWS A5.10/A5.10M-17 standards, with all deliverables meeting RA001 technical requirements. The contractor is responsible for the complete logistics chain, including packaging according to ASTM-D3951-15, marking per MIL-STD-129, and palletization following DLAI MD00100452 REV B. Final products must be shipped and delivered to designated DLA locations, with performance centered in New Cumberland, Pennsylvania.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Solicitation # SPE7M2-27-T-0575

This solicitation, issued by the DLA Weapons Support Nuclear Reactor Program under solicitation number SPE7M2-27-T-0575, is for the procurement of 12 hot rolled metal plates (NSN 9515002044574). Each plate must be 0.3125 inches thick, 50 inches wide, and 144 inches long, with a finish that is either sand blasted or pickled overall. The materials must comply with ASTM A240/A240M-26 and ASTM A480/A480M-20A standards. Strict marking requirements are mandated per ASTM A480/A480M, requiring each plate to display the DLA contract number, national stock number, specification number and revision, steel type, manufacturer's test identification number, manufacturer's name or trademark, and dimensions. The contract is a total small business set-aside under NAICS code 331221. Delivery is specified as FOB Origin with a need ship date of April 6, 2027, and a final required delivery date of June 5, 2027, to the DLA Distribution facility in New Cumberland, Pennsylvania. Inspection and acceptance will occur at the destination per FAR 52.246-2. Packaging and preservation must adhere to MIL-STD-2073-1E, MIL-STD-163, and ASTM A700, with a strict prohibition on the use of mercury or mercury-containing compounds in packaging and marking. Administrative requirements include the use of the Wide Area Workflow (WAWF) system for electronic invoicing and payment. The procurement incorporates various DFARS and FAR clauses, including the Buy American and Balance of Payments Program, safeguarding of covered defense information, and prohibitions on certain telecommunications equipment. Metal certification via CDRLs and DD Form 1423 is required. All quotes must be submitted through the DLA Internet Bid Board System (DIBBS).

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

DEADLINE

ARMOR, SUPPLEMENTAL, SMA

Solicitation # SPE7L4-27-T-0716

This solicitation, issued by the DLA Weapons Support LSO Combat Vehicles and Armament, is a small business set-aside for the procurement of 14 metal supplemental armor plates designed for small arms fragmentation protection under NSN 2540-01-536-1118. The contract requires delivery to Texarkana, Texas, within 280 days after the order is placed, with a specified need ship date of August 17, 2027. Inspection and acceptance will occur at the origin. The procurement is subject to strict technical and quality requirements, including adherence to reference drawing NR 19207 12540115 and ASME Y14.5M standards. Key compliance requirements include the use of the Wide Area WorkFlow system for invoicing and strict adherence to DLA packaging and marking standards, specifically MIL-STD-129 and MIL-STD-2073-1E. Because the item contains export-controlled technical data subject to ITAR or EAR, eligible offerors must possess an approved US/Canada Joint Certification Program certification and DLA authorization. Additionally, the contract incorporates the Buy American Act, the Berry Amendment, and NIST SP 800-171 cybersecurity assessment requirements. A price evaluation preference is available for HUBZone small business concerns, and items produced via additive manufacturing are ineligible for award.

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

Solicitation # SPE8E4-27-T-0187

Solicitation SPE8E4-27-T-0187 is a fixed-price, small business set-aside procurement for four sheets of corrosion and heat-resistant Steel Comp 321. The material must be cold rolled with a sheared edge, 2D finish, and solution heat treated, measuring 0.040 inches thick, 48 inches wide, and 144 inches long. Delivery is required within 51 days after receipt of order to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. Only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible for award, and a price evaluation preference is provided for certified HUBZone small business concerns. Strict quality and compliance standards apply, including the requirement for a Certificate of Quality Compliance (Mill-Material Certification) with every shipment. Sheets must conform to exact dimensions, and test coupons are prohibited. Packaging and preservation must adhere to MIL-STD-2073-1E and ASTM A700, with marking following MIL-STD-129 and specific continuous identification requirements including the contract delivery order number, NSN, and manufacturer details. Inspection and acceptance will occur at the destination. The contract also incorporates standard federal regulations regarding the Buy American Act, safeguarding covered defense information, and electronic invoicing via the Wide Area WorkFlow system.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

BCCA Compliant Material SupplierThis subcontract agreement establishes a partnership with a supplier to provide BCCA-compliant materials for prime contractors working on utility plant projects at the University of California, San Diego. The scope of supply includes carbon steel rebar, structural steel, flat glass, and mineral wool board insulation. To ensure adherence to the Buy Clean California Act standards, the supplier is required to deliver certified materials along with facility-specific Type III Environmental Product Declarations. Managed by The Regents of the University of California, the contract is centered in San Diego, California. The solicitation process began on October 29, 2026, with a response deadline set for November 13, 2026. The agreement focuses on the procurement of sustainable construction materials under NAICS code 331221 to meet specific environmental and regulatory mandates for university infrastructure.

The Regents of the University of California

POSTED

DEADLINE

Ductile Iron Pipe SupplyThis subcontract opportunity is issued by Garney Companies, Inc. for the supply and delivery of large diameter Ductile Iron Pipe to project sites within Charles County Government jurisdictions. The scope of work specifically requires the provision of pipes with a diameter of 36 inches or larger to support prime contractors. The contract is designated as a set-aside for SBA certified Women-Owned Small Businesses and Disadvantaged Business Enterprises under NAICS code 331221. Interested parties must submit their responses by the deadline of November 9, 2026.

Garney Companies, Inc.

POSTED

DEADLINE

Steel Reinforcing Bar SupplyThe City of San Antonio is seeking a subcontractor for the supply of steel reinforcing bars and rods to support prime contractors on street rehabilitation projects. The scope of work includes the fabrication and delivery of rebar and tying wire specifically for use in concrete structures, ensuring all necessary steel reinforcement materials are transported directly to the project sites. This subcontract opportunity falls under NAICS code 331221 and was posted on October 28, 2026. Interested parties must submit their responses by the deadline of December 15, 2026.

POSTED

DEADLINE

Supplier of Zinc-Coated Carbon Steel SheetsThis subcontract involves the supply of four zinc-coated carbon steel sheets for prime contractors working on Department of Defense procurement projects through the DDSP New Cumberland Facility. The required materials must be 0.0635 inches thick, 48 inches wide, and 96 inches long, featuring a sheared edge and a zinc coating of 1.250 ounces per square foot. To ensure quality and compliance, the supplier must adhere to ASTM A653, ASTM A700, and SAE AMS2807C standards. Additionally, the contractor is required to maintain a QSLD listing for FSGs 95 and 96 and provide Mill-Material Certification. The response deadline for this opportunity is November 9, 2026.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Supply of Zinc-Coated Chain Shackles (Critical Application)This subcontract involves the manufacture and supply of three specialized zinc-coated steel shackles with a 1-5/8 inch diameter for the DLA Weapons Support ASC Supplier OEM Division. The components must be produced in accordance with Federal Specification Type IVB, Grade B, Class 2, while strictly adhering to TDP Rev A Gen 3 and RR-C-271H(1) standards. The contractor is responsible for ensuring all packaging and marking meet MIL-STD-2073-1E and MIL-STD-129 requirements. Additionally, the project demands full compliance with QAP 13873 and CDRLCOQC26124. Performance for this critical application contract will take place in New Cumberland, Pennsylvania.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

1 day ago

DEADLINE

in 7 days

AI Contract Overview

The contract solicits the supply of nonelectrical wire made from carbon steel, galvanized, or alloy materials, all of which must conform to military specifications covering dimensions, mechanical properties, and performance standards. The work includes full sourcing of raw materials, rigorous quality assurance procedures to ensure compliance with military standards, appropriate packaging to safeguard products during transit, and timely delivery to designated Defense Logistics Agency distribution centers. The requirement is structured as a subcontract under a Total Small Business Set-Aside, meaning only small businesses certified by the Small Business Administration may compete, as defined under FAR 19.5. The North American Industry Classification System code 331221 identifies the industrial sector involved, which pertains to steel wire drawing and related manufacturing activities. Performance of the contract is required at a location in Albany, Georgia, with a zip code of 31704-1128, and suppliers must be prepared to meet all logistics and delivery timelines associated with DLA operations. The solicitation was posted on July 14, 2026, and responses are due by July 21, 2026, leaving a one-week window for submission. The contract is managed under the Department of Defense’s Construction & Equipment MRO Service I program, indicating its purpose supports maintenance, repair, and overhaul activities critical to defense infrastructure. All vendors must ensure full compliance with military specifications and deliver materials in quantities as specified, with no flexibility on quality or delivery parameters.

General Info

Small businesses supply military-spec carbon steel wire to DLA Albany by July 21, 2026, under Total Small Business Set-Aside.

Agency

Department Of Defense → CONSTRUCTION & EQUIPMENT MRO SVC I

NAICS

331221 - Rolled Steel Shape Manufacturing

Place of Performance

ALBANY, GA, 31704-1128, USA

Set-Aside

SBA

Documents

This scope was carved out of SPE8E9-26-Q-0547.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

WIRE, NONELECTRICAL

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedJul 14

subcontract

Response DeadlineJul 21

Deadline has passed

Submission Closed

07/21/2026, 05:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → CONSTRUCTION & EQUIPMENT MRO SVC I

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → CONSTRUCTION & EQUIPMENT MRO SVC I

Office AddressN/A

ContactsNo contact information available

Full Description

Supply of nonelectrical wire in various quantities meeting military specifications, including sourcing, quality assurance, packaging, and delivery to DLA distribution centers.