Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Nonmetallic Hose Assembly Fabrication (Critical Application)

Active

Federal

Response Deadline10/23/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the manufacture and assembly of four nonmetallic hose assemblies for the DLA Weapons Support Fluid Handling Division. The fabrication must strictly adhere to NSN 4720999283326 and specific KNDS Defence UK Limited part numbers, including G406/4952/40, G406/8016 Item 117, and G406/8016/117. All work must be performed in compliance with DLA RA001, ASTM D3951, and MIL-STD-129 standards. The project requires the contractor to maintain DPAS DO-rating capability and ensure full compliance with the Berry Amendment. Performance will take place in New Cumberland, Pennsylvania. Interested parties must respond by October 23, 2026, for this critical application under NAICS code 313320.

General Info

Manufacture four nonmetallic hose assemblies for DLA per specific standards in Pennsylvania.

Agency

Department Of Defense → DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

NAICS

313320 - Fabric Coating Mills

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE7M4-27-T-1149.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

HOSE ASSEMBLY, NONMETAL

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 12

subcontract

Response DeadlineOct 23

Submission deadline

Response Deadline

10/23/2026, 05:00:00 PM UTCin 7 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufactures and assembles nonmetallic hose assemblies for prime contractors on DLA Weapons Support Fluid Handling Division projects. Fabricates assemblies per NSN 4720999283326 and KNDS Defence UK Limited part numbers G406/4952/40, G406/8016 Item 117, and G406/8016/117. Complies with DLA RA001, ASTM D3951, and MIL-STD-129. Requires Berry Amendment compliance and DPAS DO-rating capability. Delivers four completed hose assemblies.

Similar Contracts

Same NAICS industry code

High-Temperature Insulation Material SupplyThis subcontract involves the supply of raw high-temperature insulation fabrics and composite materials to prime contractors supporting DLA Weapons Support ASC projects. The scope of work requires the delivery of certified raw insulation textiles and fibers that strictly adhere to the thermal specifications outlined in the Technical Data Package. Managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div, the contract mandates full compliance with the Berry Amendment and the Buy American Act. Performance for this requirement is centered at Tinker AFB, with the procurement categorized under NAICS code 313320.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Structural Firefighting Moisture Barrier Fabric SupplyThis subcontract involves the supply of specialized moisture barrier fabrics for prime contractors working on CAL FIRE structural firefighting protective ensemble projects. The scope of work includes the manufacture of technical fabrics designed for compatibility with PBI Flex/Max outer shells and Titanium/Glide Ice thermal liners. The supplier is responsible for delivering the physical fabric along with essential technical documentation, including PFAS data statements and manufacturer specifications. To ensure compliance with NFPA standards, the provider must supply UL Certified Letters that validate Thermal Protective Performance, Total Heat Loss, and Evaporative Resistance ratings. This procurement is categorized under NAICS code 313320 and is managed through the California state procurement system.

POSTED

DEADLINE

SEAL, NONMETALLIC SP

Solicitation # SPE7M1-26-T-353G

This fixed-price solicitation, issued by the DLA Land and Maritime Maritime Supply Chain, is for the procurement of six nonmetallic seals under NSN 5330-01-466-3085. The items are designated as critical application items and are associated with part numbers HS4183B1 from Rubbercraft Corporation of California and The Boeing Company, as well as part number RM017178 from The Boeing Company. The delivery is required within 102 days after the order, with a specified original delivery date of November 22, 2026, to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The contract mandates strict material and quality standards, requiring that all supplied items be free of asbestos and Class I ozone-depleting chemicals. Due to the risk of deterioration from ultraviolet rays, the seals must be packaged in medium duty, waterproof, greaseproof, opaque bags per MIL-DTL-117, Type II, Class C, Style 1. Marking must comply with MIL-STD-129 and MIL-STD-130N. Inspection and acceptance will occur at the origin, and the manufacturer's inspection system must meet SAE AS9003 or ISO 9001 standards. Administrative requirements include electronic invoicing via the Wide Area Workflow system and compliance with the Buy American Act and Berry Amendment. The contractor must also adhere to various cybersecurity and defense information controls, including CMMC Level 2 self-assessment and NIST SP 800-171 requirements. Quotations are to be submitted to the issuing office in Columbus, Ohio, by September 25, 2026.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Berry Amendment Compliant Nylon Fabric SupplierThis subcontract opportunity is for the supply of high-grade nylon fabric to prime contractors supporting MEDICAL SUPPLY CHAIN MD SURG FSF projects under the Department of Defense. The required material must be suitable for medical instrument rolls in accordance with NSN 6545013975260 and can be delivered as raw nylon fabric rolls or yardage. Performance for this contract will take place in San Antonio, Texas. A critical requirement for this procurement is the mandatory certification of origin to ensure full compliance with the Berry Amendment and the Buy American Act. Interested parties should note the solicitation was posted on October 13, 2026, with a response deadline of October 19, 2026. The project falls under NAICS code 313320.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Berry Amendment Compliant Blackout Fabric SupplyThis subcontract involves the sourcing and delivery of high-density blackout textile material to prime contractors fulfilling Defense Logistics Agency supply contracts. The scope of work requires the provision of raw fabric rolls or yardage originating from approved domestic sources to ensure full compliance with the Buy American Act and the Berry Amendment. To maintain these standards, the supplier must provide formal certification of origin for all materials delivered. The opportunity is categorized under NAICS code 313320 and is associated with the Department of Defense. Interested parties must adhere to the response deadline of October 26, 2026. Performance for this contract is designated for FPO 34085.

Defense Logistics Agency

POSTED

DEADLINE

Solicitation # SPE7M4-27-T-1177

Solicitation SPE7M4-27-T-1177 is a request for quotations issued by the DLA Weapons Support Fluid Handling Division for the procurement of one air duct hose, identified by NSN 4720012835967 and HBD Industries part number AD888B-24-10. The requirement is classified under NAICS code 313320. The original required delivery date is December 10, 2025, with a delivery period of five days after receipt of order. Shipping is FOB Origin, and the destination for both inspection and acceptance is the AF Supply Control Receiving office at Robins AFB, Georgia. The contract mandates strict adherence to packaging and marking standards, requiring compliance with ASTM D3951 and MIL-STD-129, with DLA Master List technical and quality requirements taking precedence. Palletization must follow RP001 guidelines. Invoicing and payment processing must be conducted electronically through the Wide Area WorkFlow system. Key regulatory clauses include the Buy American and Balance of Payments Program, safeguarding of covered defense information under DFARS 252.204-7012, and various prohibitions regarding covered defense telecommunications equipment and the use of hexavalent chromium.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

HOSE ASSEMBLY, NONME

Solicitation # SPE7M4-27-T-0076

Solicitation SPE7M4-27-T-0076 is a fixed-price request for quotations issued by the Defense Logistics Agency Land and Maritime Fluid Handling Division for the procurement of six nonmetallic hose assemblies, identified by NSN 4720-01-050-1335. The contract requires delivery within 66 days after order, with shipping terms set as FOB Origin and delivery to the DLA Distribution New Cumberland facility in Pennsylvania. Inspection and acceptance will also occur at the point of origin. The procurement is subject to strict export controls under ITAR and EAR, requiring contractors to have approved US/Canada Joint Certification Program certification and completed specific DLA training to access technical data. Compliance with the Buy American Act and the Berry Amendment is mandatory, and any use of non-domestic materials must be disclosed. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129, including specific shelf-life markings. Additionally, the government will not evaluate or award contracts to offers utilizing additive manufacturing unless specifically authorized. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system.

FLUID HANDLING DIVISION

POSTED

DEADLINE

in about 8 hours

Nonmetallic Hose Assembly Fabrication (NSN 4720011141721)This subcontract, issued by the Department of Defense for the DLA Weapons Support Fluid Handling Division, requires the fabrication of 112 nonmetallic hose assemblies under NSN 4720011141721. The assemblies must feature a 180-degree angular offset and strictly adhere to MIL-DTL-83796B(2) standards. All deliverables must be packaged and marked in accordance with MIL-STD-2073-1E and MIL-STD-129, with performance taking place in Corpus Christi, Texas. The project is designated as a Total Small Business Set-Aside and mandates strict compliance with the Buy American Act, the Berry Amendment, and restrictions on ozone-depleting chemicals. To qualify, the manufacturer must hold ISO 9001:2015 and SAE AS9100 certifications. Responses to this solicitation are due by October 23, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Manufacturing of Seal (NSN 5330-00-0758261)This subcontract involves the manufacture and delivery of 192 units of a specific seal, identified by NSN 5330-00-0758261, for prime contractors supporting the DLA Weapons Support Fluid Handling Division. The work must be performed at Tinker AFB and requires strict adherence to the DLA Master List of Technical and Quality Requirements, with identification marking applied according to MIL-STD-130N. Eligible providers must utilize rubber or elastomer molding equipment and materials that comply with the Buy American Act and the Berry Amendment. Additionally, the contractor is required to maintain JCP certification and CMMC Level 2 compliance to be eligible for the award.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Manufacturer of Nonmetallic Hose Assemblies (NSN 4720015628339)This subcontract, issued by the DLA Weapons Support Fluid Handling Division, requires the manufacture and delivery of 250 nonmetallic hose assemblies under NSN 4720015628339. The production must strictly adhere to federal specification MIL-H-775, Parker-Hannifin P2060639161616-24.0, and RA001 technical requirements. To ensure quality and compliance, the provider must maintain an ISO 9001:2015 certified inspection system. The contract is designated as a total small business set-aside and mandates full compliance with the Buy American Act and the Berry Amendment, specifically prohibiting the use of additive manufacturing. Performance will take place in Texarkana, Texas. Interested parties must respond by October 23, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Nonmetallic Hose Assembly ManufacturingThis subcontract involves the manufacture and supply of 64 nonmetallic hose assemblies for prime contractors supporting the DLA Weapons Support Fluid Handling Division. The assemblies must be produced according to NSN 4720-01-158-3227 specifications and maintain compatibility with part numbers from Danfoss, Parker Hannifin, or General Dynamics. All deliverables must be properly labeled and adhere to RA001 quality requirements and ASTM D3951 packaging standards. The project falls under NAICS code 313320 and is managed by the Department of Defense. Performance for this contract will take place in Tracy, California. Interested parties should note the response deadline of October 23, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Non-Metallic Hose Assembly FabricationThis subcontract involves the fabrication and supply of a specific non-metallic hose assembly for the Department of Defense under the DLA Weapons Support Fluid Handling division. The contractor is responsible for manufacturing a single hose assembly junction with a 35mm inner diameter and 44mm outer diameter, featuring female swivel fittings at both ends and a total length of 1370mm, all produced in accordance with altered item drawings. To be eligible for this project, the provider must maintain JCP certification and hold necessary ITAR/EAR authorizations. The final deliverable must be fully completed, tested, and inspected to ensure compliance with technical specifications. The solicitation was posted on October 12, 2026, with a response deadline of October 23, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

Same awarding agency

MIL-SPEC Aerospace Packaging and MarkingThis subcontract for MIL-SPEC Aerospace Packaging and Marking supports the Department of Defense through the DLA Weapons Support Fluid Handling Division. The contractor is responsible for providing specialized packaging and marking services for critical aviation components and tube assemblies intended for prime contractors. All work must strictly adhere to ASTM D3951 and RP001 packaging standards, with marking and labeling performed according to MIL-STD-129 to ensure all items are shipment-ready for the DLA Distribution Depot Oklahoma. A primary technical requirement of the contract is the preservation of the oxygen-clean status of all assemblies during the packaging process. Performance will take place at Tinker AFB, Oklahoma. Interested parties must respond by October 26, 2026, regarding this requirement categorized under NAICS code 488410.

Motor Vehicle Towing

POSTED

about 16 hours ago

DEADLINE

Oxygen System Cleaning and Inspection ServicesThis subcontract for Oxygen System Cleaning and Inspection Services supports the Department of Defense through the DLA Weapons Support Fluid Handling Division. The selected provider will perform specialized cleaning and inspection of metal tube assemblies for prime contractors, ensuring that both interiors and exteriors are free of oils and particulates. All work must be performed in accordance with AF Drawing 8148650 for oxygen service, utilizing certified chemical degreasing systems or ultrasonic cleaners. The scope of work requires the delivery of certified oxygen-clean assemblies accompanied by detailed inspection reports. Performance will take place at Tinker AFB, zip code 73145-8000. The solicitation was posted on October 15, 2026, with a response deadline of October 26, 2026, falling under NAICS code 332813.

Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

about 16 hours ago

DEADLINE

Precision Metal Tube Assembly ManufacturingThis subcontract involves the fabrication of precision metal tube assemblies for oxygen life support equipment under the DLA Weapons Support Fluid Handling Division. The selected contractor will be responsible for the cutting, bending, and fitting of tubing in strict accordance with AF Drawing 8148650 to deliver assemblies identified by NSN 4710-00-344-3939. Performance of the work is located at Tinker AFB. To be eligible for this project, contractors must obtain Engineering Source Approval from the government design control activity and maintain CMMC Level 2 compliance. The opportunity is categorized under NAICS code 336413, with a response deadline set for October 26, 2026.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 16 hours ago

DEADLINE

Nonmetallic Hose/Tubing Material SupplyThis subcontract opportunity is for the supply of raw nonmetallic tubing and hose materials to support prime contractors working with the DLA Weapons Support Fluid Handling Division. The selected provider must deliver high-grade polymers and elastomers that strictly adhere to the chemical and physical properties specified in drawing NR 78286 SS43. Because these materials are classified as Critical Safety Items, the contractor is required to provide comprehensive material certifications and full supply chain traceability. The project is designated as a Total Small Business Set-Aside under NAICS code 326220 and is managed by the Department of Defense. Performance for this contract will take place in San Diego, California. Interested parties must submit their responses by October 22, 2026.

Rubber and Plastics Hoses and Belting Manufacturing

POSTED

about 16 hours ago

DEADLINE

Military-Spec Packaging and Marking for Fluid Handling ComponentsThis subcontract involves providing packaging materials and performing final packing and marking services for prime contractors supporting the Department of Defense DLA Weapons Support Fluid Handling Division. The scope of work requires the execution of packaging according to MIL-STD-2073-IE and marking per MIL-STD-129 to ensure a shelf life of 120 months. The project entails the delivery of 112,000 units to be distributed across DLA facilities in Jacksonville and San Diego. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 561910. Performance will take place in San Diego, California. Interested parties must adhere to the response deadline of October 22, 2026, to be considered for this military-spec requirement.

Packaging and Labeling Services

POSTED

about 16 hours ago

DEADLINE

Nonmetallic Hose Assembly Fabrication (NSN 4720-01-289-6752)This subcontract involves the fabrication and assembly of 112,000 traceable nonmetallic hose assemblies for the Department of Defense, specifically supporting the DLA Weapons Support Fluid Handling Division. The work must be performed in accordance with drawing NR 78286 SS43 Revision 14, as these components are designated as Navy Critical Safety Items. Performance of the contract will take place in San Diego, California. To be eligible, contractors must hold SAE AS9100 certification, CMMC Level 2 compliance, and approval from the US/Canada Joint Certification Program. This opportunity is designated as a Total Small Business Set-Aside under NAICS code 326299. Interested parties must respond by October 22, 2026.

All Other Rubber Product Manufacturing

POSTED

about 16 hours ago

DEADLINE

MIL-SPEC Packaging and Palletization ServicesThis subcontract for MIL-SPEC Packaging and Palletization Services supports the Department of Defense through the DLA Weapons Support Fluid Handling Division. The contractor is responsible for providing military-grade packaging, marking, and palletization for pistons intended for FOB Origin shipment. All work must be performed in Silverdale, Washington, and must strictly adhere to MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization. Technical requirements include the application of preservation method 41, cleaning and drying level 1, and the use of wrap material LJ. The project is categorized under NAICS code 561910, with a response deadline set for October 26, 2026. The final deliverable is a fully processed piston that meets all specified military standards and is ready for transport.

Packaging and Labeling Services

POSTED

about 16 hours ago

DEADLINE

Precision Machined Piston (NSN 2040-01-056-1207)This subcontract involves the manufacture of one high-precision piston for the Department of Defense, specifically supporting the DLA Weapons Support Fluid Handling Division. The contractor is required to utilize precision CNC machining to ensure the final product adheres to the technical data packages for NSN 2040-01-056-1207 and complies with the DLA Master List of Technical and Quality Requirements. The project mandates strict adherence to the Buy American Act and requires compliance with environmental regulations regarding mercury and ozone-depleting chemicals. Performance will take place in Silverdale, Washington, under NAICS code 332710, with a response deadline set for October 26, 2026.

POSTED

about 16 hours ago

DEADLINE

Military-Grade Packaging and Marking ServicesThis subcontract for Military-Grade Packaging and Marking Services supports prime contractors delivering hardware to the DLA Weapons Support Fluid Handling Division. The scope of work involves the preservation, packaging, and marking of three Lower Rings, which must be delivered in unit and intermediate containers ready for shipment. All activities must strictly adhere to MIL-STD-2073-1E and RP001 for packaging and MIL-STD-129 for marking, while utilizing preservation method 33 and specific BG/C cushioning and dunnage. The project is managed under NAICS code 561910 and will be performed in Phoenix, Arizona. Interested parties should note the response deadline of October 26, 2026, for this Department of Defense requirement.

Packaging and Labeling Services

POSTED

about 16 hours ago

DEADLINE

Precision Machining and Fabrication of Lower Rings (P/N 6455-4)This subcontract involves the precision machining and fabrication of three lower rings for the DLA Weapons Support Fluid Handling Division. The components must be manufactured to part number 6455-4 and NSN 5365012048039 specifications, with performance based on zero-based sampling according to MIL-STD-1916 or ASQ H1331 standards. The selected provider must hold SAE AS9003 or ISO 9001 certification and utilize RT001 compliant test equipment. Work is to be performed in Phoenix, Arizona, under NAICS code 332710, with a response deadline of October 26, 2026.

POSTED

about 16 hours ago

DEADLINE

Nonmetallic Hose Assembly Supplier (NSN 4720-00-994-5788)This subcontract involves the supply of 155 nonmetallic hose assemblies for Detroit Diesel Series 71 Engines, Type 174, supporting the DLA Weapons Support Fluid Handling Division. Each unit must feature a 0.312 inch inner diameter and a length of 28 inches. The items are to be delivered FOB Origin and must strictly adhere to MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization. The contractor is required to maintain compliance with the Buy American Act and DFARS 252.204-7012 regulations. This procurement falls under NAICS code 332912, with the place of performance located in New Cumberland. Interested parties must respond by October 26, 2026.

Fluid Power Valve and Hose Fitting Manufacturing

POSTED

about 16 hours ago

DEADLINE

MIL-SPEC Packaging and FulfillmentThis subcontract involves providing specialized military packaging services for the Department of Defense, specifically for the DLA Weapons Support Fluid Handling Division. The scope of work requires the sealing of 848 O-rings in medium duty, waterproof, greaseproof, and opaque bags. All work must be performed using industrial sealing equipment in strict accordance with RP001, MIL-DTL-117, and MIL-STD-2073-1E packaging data guidelines. The completed items are to be delivered ready for shipment to DLA Distribution Warner Robins, with the place of performance located at Robins Air Force Base. The project is categorized under NAICS code 488410, with a response deadline set for October 26, 2026.

Motor Vehicle Towing

POSTED

about 16 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS