Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Nonmetallic Hose Manufacturing and Supply

Active

Federal

Response Deadline08/20/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the manufacture and supply of 80 units of nonmetallic hose designated by NSN 4720-01-470-0705 and part number 12421965-001, specified as Type I with Code W, each具备 a 120-month shelf life. All units must fully comply with the DLA Master List requirements and be labeled in accordance with MIL-STD-129 standards to ensure proper identification and logistics handling throughout the supply chain. Environmental restrictions must be observed during production and packaging to meet applicable federal and military sustainability guidelines. The contract is structured as a subcontract under NAICS code 326220 and is being managed by the Fluid Handling Division of the Department of Defense. The place of performance is confirmed as New Cumberland, Pennsylvania, with a zip code of 17070-5002. The solicitation was posted on August 9, 2026, and all responses are due by August 20, 2026, with the procurement proceeding through the DIBBS platform at the provided URL.

General Info

80 nonmetallic hoses, Type I Code W, 120-month shelf life, MIL-STD-129 labeled, New Cumberland, PA delivery.

Agency

Department Of Defense → FLUID HANDLING DIVISIONView Agency

NAICS

326220 - Rubber and Plastics Hoses and Belting ManufacturingView NAICS

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 9

subcontract

Response DeadlineAug 20

Submission deadline

Response Deadline

08/20/2026, 05:00:00 PM UTCin 11 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → FLUID HANDLING DIVISION

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → FLUID HANDLING DIVISION

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufacture and supply of 80 units of nonmetallic hose (NSN: 4720-01-470-0705, P/N: 12421965-001), Type I (Code W), with 120-month shelf life. Must comply with DLA Master List, MIL-STD-129 labeling, and environmental restrictions.

Similar Contracts

Same NAICS industry code

Rubber Seals and Gaskets SupplyThe contract is for the supply of nonmetallic special-shaped rubber sections intended for defense or industrial applications, requiring full manufacturing capabilities along with proper packaging and FOB Origin shipping in strict compliance with military specifications. The components, described as rubber seals and gaskets, must be produced to exacting standards to ensure performance in demanding operational environments. The work is subcontracted under NAICS code 326220, which classifies rubber product manufacturing, and is managed by the Department of Defense through its DDSP New Cumberland Facility, with performance required at the 17070-5002 location in New Cumberland. All deliveries must meet defined military criteria and be shipped from the manufacturer’s facility, placing responsibility for logistics and quality control squarely on the contractor. The solicitation was posted on August 9, 2026, with responses due by August 20, 2026, and is part of a broader procurement effort to support critical defense and industrial infrastructure needs.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 7 hours ago

DEADLINE

Nonmetallic Hose Assembly Manufacturing & SupplyThe contract is for the manufacture and delivery of nonmetallic hose assemblies that comply with military specifications, including all associated labeling, packaging, and certification requirements. The products must be delivered to New Cumberland, Pennsylvania, with the NAICS code 326220 indicating the scope aligns with rubber product manufacturing. The work is being procured as a subcontract under the Department of Defense’s Fluid Handling Division, with a response deadline of August 20, 2026, and the solicitation was posted on August 9, 2026. Compliance with all applicable military standards for performance, durability, and documentation is required, and the supplier is responsible for ensuring the assembled products meet the necessary quality and traceability provisions for military use. Deliveries must be coordinated to arrive at the specified location with full certification and proper packaging to meet defense logistics requirements.

FLUID HANDLING DIVISION

POSTED

about 7 hours ago

DEADLINE

Nonmetallic Tubing SupplyThe contract solicits the supply of nonmetallic tubing in 100-foot reels, meeting stringent DLA technical specifications RQ011 and RQ017, with full compliance to MIL-STD-2073-1E packaging standards and MIL-STD-129 marking requirements. The tubing must be classified as Type I with special code 32 and maintain a minimum 60-month shelf life under specified storage conditions to ensure long-term readiness and usability. All deliveries are to be performed to the designated place of performance in Herlong, California, with ZIP code 96113-5520. The solicitation, posted on August 9, 2026, requires responses no later than August 20, 2026, and is issued as a subcontract under NAICS code 326220, administered by the Department of Defense through the Maritime Supply Chain ESOC Buys office. Participation is governed by standard federal procurement protocols without any specified set-aside designation.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 7 hours ago

DEADLINE

Precision Gasket Manufacturing and SupplyThe contract requires the manufacture and supply of 113 high-precision gaskets featuring a nitrile rubber inner ring and a copper-alloy cast outer ring, fully compliant with the military specification MIL-G-24748A and applicable military packaging standards to ensure durability and performance under extreme conditions. All gaskets must meet exacting dimensional, material, and finish requirements to guarantee compatibility with defense systems and reliability in mission-critical applications. The gaskets are intended for use in secure military environments where corrosion resistance, thermal stability, and sealing integrity are paramount. This is a small business set-aside subcontract under the SBA program, exclusively available to qualified small businesses, with the NAICS code 326220 indicating rubber product manufacturing. The solicitation was posted on August 9, 2026, with responses due by August 24, 2026, and is managed by the Maritime Supply Chain under the Department of Defense. The work is to be performed in compliance with federal contracting regulations, and the procurement is accessible through the DIBBS portal under the reference number SPE7M126U5096, ensuring transparency and proper oversight for all participating vendors.

MARITIME SUPPLY CHAIN

POSTED

about 7 hours ago

DEADLINE

O-Ring Manufacturing and SupplyThe contract is for the manufacture and supply of O-rings that meet military specifications, with full compliance required for packaging, labeling, and delivery according to Defense Logistics Agency standards. The work is classified as a subcontract under NAICS code 326220, indicating focus on rubber product manufacturing, and the performance location is specified as Albany, Georgia, with a zip code of 31704-1128. The Department of Defense, through its Land Supplier Operations Vehicle Support office, is the issuing agency, and the solicitation was posted on August 9, 2026, with a response deadline of August 20, 2026. All delivered O-rings must adhere strictly to military-grade requirements to ensure operational readiness and compatibility with defense systems.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 7 hours ago

DEADLINE

Manufacturing of Special-Shaped Nonmetallic Rubber SectionsThe contract is for the manufacturing of custom nonmetallic rubber components that must comply with military specifications, ensuring strict adherence to performance, durability, and environmental standards required for Department of Defense applications. The work includes full lifecycle compliance such as shelf-life management, specialized packaging, and accurate labeling to meet DOD regulatory requirements. The components are described as special-shaped, indicating unique geometries or tailored designs for specific military systems or equipment use cases. The solicitation is issued under NAICS code 326220 for rubber product manufacturing and is classified as a subcontract opportunity with a response deadline of August 20, 2026. Performance is required at the New Cumberland facility with ZIP code 17070-5002, operated by the DDSP New Cumberland Facility under the Department of Defense. While no specific point of contact or set-aside details are provided, the posting date of August 9, 2026, indicates an upcoming procurement window for qualified vendors capable of fulfilling complex military-grade rubber component requirements.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 7 hours ago

DEADLINE

Internal Seals and Elastomer Component SupplyThe contract calls for the supply of Buna-N and fluorocarbon rubber seals, including O-rings and gaskets, specifically designed for integration into a pressure regulating valve. All components must strictly comply with the military specifications MIL-P-25732 and MIL-R-83248, ensuring dimensional accuracy, material integrity, and performance under demanding environmental and operational conditions. The seals are critical to maintaining pressure integrity and system reliability within defense applications, requiring adherence to high-standard manufacturing and quality control protocols. This is a total small business set-aside subcontract under the SBA program, assigned the NAICS code 326220 for rubber product manufacturing. The opportunity was posted on August 9, 2026, with responses due by August 20, 2026, and the place of performance is designated as Bremerton, Washington, with a zip code of 98314-6001. The contracting activity is under the U.S. Department of Defense through the Puget Sound office, and the solicitation is accessible via the DIBBS platform for eligible small businesses to submit proposals.

POSTED

about 7 hours ago

DEADLINE

Precision Rubber O-Ring Manufacturing

LAND SUPPLY CHAIN

POSTED

about 7 hours ago

DEADLINE

Precision Belt Manufacturing (Plastic/V-Belt Fabrication)The contract requires the manufacture of 29 precision V-belts identified by NSN 3030-01-416-1542, fabricated strictly to military technical drawing 19207 12375797 Rev A Gen 3. The scope encompasses full production cycle activities including material sourcing, molding, curing, and rigorous quality inspection under critical item source inspection protocols to ensure compliance with military specifications. All units must meet exacting dimensional, mechanical, and durability standards to support operational readiness within defense systems. Production is to be performed at the designated place of performance in New Cumberland, Pennsylvania, with a posted date of August 9, 2026, and a formal response deadline of August 20, 2026. This is classified as a subcontract under NAICS code 326220, indicating involvement in plastic product manufacturing, and is managed by the Department of Defense through its Land Supplier Operations Engines division. The requirement reflects a high-priority industrial need for mission-critical components subject to strict quality assurance and traceability controls.

LAND SUPPLIER OPNS ENGINES

POSTED

about 7 hours ago

DEADLINE

Solicitation # SPE7L3-26-T-170E

The contract is for the procurement of 884 O-rings, part number 20315AF, supplied by Falls Filtration Technologies Inc. from Stow, Ohio, under the national stock number 5331-01-079-0875. It is designated as a critical application item and classified as a commercial item, subject to strict compliance with DLA packaging and technical requirements. The O-rings must be free of asbestos as defined in FED-STD-313 and must not contain or come into direct contact with mercury or mercury-containing compounds, except for specific exempted functional uses such as in batteries, fluorescent lights, instrumentation, weapon systems, or chemical reagents authorized by NAVSEA. Portable fluorescent lamps or instruments containing mercury must be shockproof and include a secondary containment barrier per NAVSEA 5100-003D. All items must be packaged in accordance with MIL-STD-2073-1E and sealed in a medium-duty, waterproof, greaseproof, opaque bag per MIL-DTL-117, Type II, Class C, Style 1, due to the sensitivity of the item to ultraviolet light exposure. Marking and palletization must follow MIL-STD-129 and DLA packaging standards respectively. Delivery is FOB origin with zero tolerance for quantity variance and inspection and acceptance occurring at the destination. The required delivery date is 54 days from contract award, with a need ship date of June 13, 2026, and an original required delivery date of June 17, 2026. The shipment must be sent to the DLA Distribution Albany facility at 814 Radford Blvd, Building 1221, Door 20, Albany GA 31704-1128, as specified in the freight shipping and parcel post addresses. The contract is issued under solicitation SPE7L3-26-T-170E, with a unit price of $0.00 per unit and a total contract value determined by the quantity. The supplier must comply with DLA’s Master List of Technical and Quality Requirements identified by R or I numbers, and adherence to the applicable revision of that master document controls compliance, depending on the acquisition size and timeline. The point of contact is Karen McCarley, with procurement handled under NAICS code 326220 by the Department of

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 7 hours ago

DEADLINE

HOSE ASSEMBLY, NONME

Solicitation # SPE7M0-26-T-034L

This contract is for a single unit of a non-metric hose assembly identified by NSN 4720-01-656-3692 and part number F387TCJSJ9060606-225 from Parker-Hannifin Corporation, under solicitation SPE7M0-26-T-034L. The item must be delivered within five days to Hurlbert Field, Florida, with delivery terms FOB origin and no variance allowed in quantity. Inspection and acceptance occur at the destination, and packaging must comply with ASTM D3951 unless superseded by DLA’s Master List of Technical and Quality Requirements, which takes precedence. All packaging must be marked and labeled per MIL-STD-129 and palletized according to DLA’s packaging guidelines. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute materials require prior approval unless explicitly authorized by the specification. Shipping must be done via the fastest traceable means; parcel post is forbidden. The purchase request number is 7017784019, with a required delivery date of August 6, 2026, and the contract is governed by DoD unit of issue standards. Government use identifiers and shipping controls are included for internal tracking, with primary point of contact being Abaigael Masterson at DLA.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 7 hours ago

DEADLINE

HOSE ASSEMBLY, NONME

Solicitation # SPE4A0-26-T-4222

This contract is for a single non-mechanical hose assembly identified by NSN 4720-01-713-7766 and part number AE2464689H0264, sourced from Sikorsky Aircraft Corporation with CAGE code 78286. The item must comply with a comprehensive set of technical, quality, and packaging requirements mandated by the Defense Logistics Agency, including adherence to the DLA Master List of Technical and Quality Requirements referenced by R and I numbers. Supply chain traceability documentation must be retained by the contractor in accordance with DLAD Procurement Note C03 from August 2016, and while item unique identification is not required, the contractor must follow strict configuration control and variance procedures. The product is classified as a Type I shelf-life item with a fixed 120-month (10-year) expiration date, marked with special code 32, and must meet non-tailored quality requirements based on ISO 9001:2015. All manufacturing and inspection activities must follow approved sampling standards—either MIL-STD-1916 or ASQ H1331—with zero non-conformances allowed in the sample unless otherwise specified. Measuring and test equipment used must be calibrated and verified, and cybersecurity compliance requires a CMMC Level 2 self-assessment. Packaging must conform to MIL-STD-2073-1E and MIL-STD-129, with marking and palletization following DLA-specific guidelines; the item is not to be shipped via parcel post and must be delivered using the fastest traceable means. Delivery is required within five days of award, FOB origin, to a designated receiving location at Naval Air Station Fallon, Nevada, with no tolerance for quantity variance. The contract was issued under solicitation SPE4A0-26-T-4222 and is governed by Federal acquisition rules with full accountability for compliance across technical, quality, cybersecurity, and logistics dimensions.

AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

about 7 hours ago

DEADLINE

More opportunities from Department Of Defense → FLUID HANDLING DIVISION

Same awarding agency

Surveying and Site LayoutThe contract calls for topographic surveying, boundary verification, and precise site layout services to support construction activities at a location in New Cumberland with a zip code of 17070-5002. These services are essential for ensuring accurate spatial data and proper alignment of infrastructure elements during the build phase. The work falls under NAICS code 541370, indicating it is classified as surveying and mapping services, and is structured as a subcontract under the Department of Defense’s Fluid Handling Division. The solicitation was posted on August 9, 2026, with a response deadline of August 20, 2026, requiring qualified vendors to submit proposals within that window. There is no set-aside designation specified, meaning the contract is open to all eligible subcontractors regardless of business size or status. The place of performance is fixed, and all services must be delivered on-site to meet project requirements.

Surveying and Mapping (except Geophysical) Services

POSTED

about 7 hours ago

DEADLINE

Paving and Asphalt ServicesThe contract pertains to paving and asphalt services for roadways, parking lots, and access roads, encompassing grading, base preparation, and asphalt placement. It is issued as a subcontract under the NAICS code 237310, which classifies it within the highway and street construction sector. The work is designated to be performed in New Cumberland, Pennsylvania, with a zip code of 17070-5002, and is managed by the Fluid Handling Division of the Department of Defense. The solicitation was posted on August 9, 2026, with a response deadline set for August 20, 2026. The contract does not specify a set-aside type nor include a point of contact, and all submissions must be made through the provided DIBBS portal link.

Highway, Street, and Bridge Construction

POSTED

about 7 hours ago

DEADLINE

Concrete Forming and PlacementThe contract titled Concrete Forming and Placement is a subcontract under the NAICS code 238110, issued by the Fluid Handling Division of the Department of Defense, seeking services for the forming, reinforcement, and pouring of structural concrete for foundations, slabs, and walls. The work is to be performed at a location in New Cumberland with a ZIP code of 17070-5002, and the solicitation was posted on August 9, 2026, with a firm response deadline of August 20, 2026. All work must meet structural and safety standards expected for defense-related construction, and bidders are expected to have the necessary expertise in concrete placement techniques, formwork assembly, and reinforcement installation. The contract is not set aside for specific small business categories and no point of contact information is provided; interested parties must reference the provided DIBBS link for full details and submission requirements.

Poured Concrete Foundation and Structure Contractors

POSTED

about 7 hours ago

DEADLINE

Plumbing and Piping Systems InstallationThe contract is for the installation of potable water, drainage, and sanitary piping systems in new or renovated facilities under the Fluid Handling Division of the Department of Defense. The work is to be performed at a location in New Cumberland with a zip code of 17070-5002 and falls under the NAICS code 238220, which classifies it as plumbing, heating, and air-conditioning contracting. This is a subcontract opportunity with a posted date of August 9, 2026, and a response deadline of August 20, 2026. All proposals must be submitted by the specified deadline to be considered, and the contract involves technical execution of essential building systems to meet operational and safety standards for federal facilities. The solicitation is accessible through the DIBBS platform for qualified subcontractors to review requirements and submit responses.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

about 7 hours ago

DEADLINE

Electrical Installation and Wiring ServicesThe contract titled Electrical Installation and Wiring Services is a subcontract under the NAICS code 238210, issued by the Department of Defense’s Fluid Handling Division, for the installation of electrical systems including conduits, wiring, panels, and lighting fixtures on commercial or infrastructure projects. The solicitation was posted on August 9, 2026, with a response deadline of August 20, 2026, and the work is to be performed at a designated location in New Cumberland, Pennsylvania, with a zip code of 17070-5002. All electrical components must be installed to meet federal and industry standards, ensuring safety, reliability, and compliance with applicable codes. The scope encompasses full-service electrical construction across project sites, requiring qualified subcontractors with proven experience in DOD-related infrastructure work. Proposals must be submitted through the designated DIBBS portal prior to the deadline, and contractors are expected to manage logistics, materials sourcing, and personnel deployment to meet contractual timelines and quality benchmarks.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

about 7 hours ago

DEADLINE

Supply of Self-Sealing Coupling Assembly (NSN: 4730010957032)

Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 7 hours ago

DEADLINE

Defense-Compliant Packaging and Marking ServicesThe contract requires full compliance with military specifications for packaging, preservation, and marking of defense-related materials, adhering strictly to MIL-STD-129 and MIL-STD-2073-1E standards. Preservation must follow Method AE, ensuring long-term protection of equipment and components during storage and transit. All items must be accurately marked and documented to meet Department of Defense requirements for traceability, identification, and logistical handling. The work is designated as a subcontract under NAICS code 561910 and is scoped for performance at Texarkana, TX, with a delivery destination of the 75507-5000 ZIP code area. The solicitation was posted on August 9, 2026, and responses are due by August 20, 2026, with no set-aside classification specified. The contracting entity is the Fluid Handling Division under the Department of Defense, and the submission must be made through the DIBBS platform using the referenced solicitation link.

Packaging and Labeling Services

POSTED

about 7 hours ago

DEADLINE

Precision Inspection and Calibration ServicesThe contract requires the performance of origin inspection as specified under RQ009 and mandates that all test and measurement equipment used in fabrication undergo NIST-traceable calibration to ensure accuracy and compliance with federal standards. This work is critical to maintaining the integrity of components within the fabrication process, ensuring that measurements remain reliable and verifiable throughout production. The inspection and calibration activities must be conducted in strict accordance with established protocols to meet the stringent quality requirements of the Department of Defense. The contract falls under the NAICS code 811211 and is classified as a subcontract issued by the Fluid Handling Division of the Department of Defense. Performance is designated for the location of Texarkana, Texas, with a zip code of 75507-5000. The solicitation was posted on August 9, 2026, and responses are due by August 20, 2026. All service providers must be prepared to meet exacting technical benchmarks, with emphasis on traceability, documentation, and adherence to federal calibration standards. The opportunity is open to qualified subcontractors capable of delivering precision inspection and calibration services under tight deadlines.

Consumer Electronics Repair and Maintenance

POSTED

about 7 hours ago

DEADLINE

Hazardous Materials Compliance and SDS ManagementThe contract requires the identification of hazardous materials and the development of OSHA-compliant Safety Data Sheets in accordance with 29 CFR 1910.1200 and Defense Federal Acquisition Regulation Supplement requirements. The work involves ensuring all chemical substances used or handled within the scope of the project are properly classified, documented, and reported to meet federal safety and regulatory standards. The vendor must possess expertise in chemical hazard evaluation and SDS preparation, with a clear understanding of both OSHA’s Hazard Communication Standard and Department of Defense procurement mandates. The contract is classified as a subcontract with a NAICS code of 541690, indicating it falls under Other Scientific and Technical Consulting Services. Performance is located in Texarkana, Texas, with a ZIP code of 75507-5000. The solicitation was posted on August 9, 2026, and responses are due by August 20, 2026. The contracting activity is under the Fluid Handling Division of the Department of Defense, and all deliverables must align with federal compliance expectations to support safe handling, storage, and transportation of hazardous materials within military operations.

Other Scientific and Technical Consulting Services

POSTED

about 7 hours ago

DEADLINE

Metal Tube Assembly Fabrication and ManufacturingThe contract involves the fabrication and manufacturing of 20 defense-grade metal tube assemblies under stringent quality and compliance standards, including adherence to Qualified Products List and Qualified Manufacturer List specifications. Each assembly must meet precise dimensional tolerances and undergo rigorous origin inspection to ensure component authenticity and suitability for military applications. The work is classified as a subcontract under NAICS code 332999 and is being managed by the Fluid Handling Division of the Department of Defense, with performance required at the specified location in Texarkana, Texas, ZIP 75507-5000. All materials and processes must align with federal defense procurement criteria, and the submission deadline for proposals is August 20, 2026, with the solicitation posted on August 9, 2026.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 7 hours ago

DEADLINE

Transportation and Delivery to DLA Cherry Point, NC (FOB Origin)This contract entails the transportation and delivery of freight from the origin point to DLA Cherry Point, North Carolina, under FOB Origin terms, meaning responsibility for the shipment transfers to the buyer once goods are loaded at the origin. The contractor must comply with all requirements for WAWF-compliant receiving reporting to ensure accurate and timely documentation of delivery acceptance. The solicitation is a subcontract classified as a Total Small Business Set-Aside under SBA guidelines, reserved exclusively for small businesses as defined by the SBA and FAR 19.5. The NAICS code 484220 specifies the nature of the work as freight trucking, highlighting the focus on ground transportation logistics. The awarding agency is the Department of Defense, specifically the Fluid Handling Division, with performance required at the designated delivery location in Cherry Point, NC, ZIP code 28533-5040. Responses must be submitted by the deadline of August 20, 2026, with the opportunity posted on August 9, 2026, and further details accessible through the official DIBBS portal link.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 7 hours ago

DEADLINE

Military-Compliant Packaging and Labeling ServicesThe contract requires comprehensive packaging and labeling services for clamp units strictly in compliance with MIL-STD-129, RP001, and ASTM D3951 standards, ensuring all markings, barcoding, and documentation meet rigorous military specifications. The work includes proper palletization and secure packaging to guarantee safe handling and transport, with full adherence to labeling requirements for logistics and inventory tracking throughout the defense supply chain. All submissions must reflect precise execution of these standards without deviation, as noncompliance will result in rejection. This is a total small business set-aside subcontract under NAICS code 423840, issued by the Fluid Handling Division of the Department of Defense, and is exclusive to small business concerns. The solicitation was posted on August 9, 2026, with a response deadline of August 20, 2026. Performance of the work is centered at Cherry Point, North Carolina, zip code 28533-5040, and bidders must be prepared to meet all requirements in full, including documentation, timelines, and quality controls, without the benefit of government oversight beyond compliance verification.

Industrial Supplies Merchant Wholesalers

POSTED

about 7 hours ago

DEADLINE