Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Precision Inspection and Calibration Services

Active

Federal

Response Deadline08/20/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the performance of origin inspection as specified under RQ009 and mandates that all test and measurement equipment used in fabrication undergo NIST-traceable calibration to ensure accuracy and compliance with federal standards. This work is critical to maintaining the integrity of components within the fabrication process, ensuring that measurements remain reliable and verifiable throughout production. The inspection and calibration activities must be conducted in strict accordance with established protocols to meet the stringent quality requirements of the Department of Defense. The contract falls under the NAICS code 811211 and is classified as a subcontract issued by the Fluid Handling Division of the Department of Defense. Performance is designated for the location of Texarkana, Texas, with a zip code of 75507-5000. The solicitation was posted on August 9, 2026, and responses are due by August 20, 2026. All service providers must be prepared to meet exacting technical benchmarks, with emphasis on traceability, documentation, and adherence to federal calibration standards. The opportunity is open to qualified subcontractors capable of delivering precision inspection and calibration services under tight deadlines.

General Info

Origin inspection and NIST-traceable calibration required in Texarkana, Texas, for Department of Defense subcontract by August 20, 2026.

Agency

Department Of Defense → FLUID HANDLING DIVISIONView Agency

NAICS

811211 - Consumer Electronics Repair and MaintenanceView NAICS

Place of Performance

TEXARKANA, TX, 75507-5000, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 9

subcontract

Response DeadlineAug 20

Submission deadline

Response Deadline

08/20/2026, 05:00:00 PM UTCin 11 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → FLUID HANDLING DIVISION

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → FLUID HANDLING DIVISION

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Perform origin inspection (RQ009) and ensure NIST-traceable calibration of test and measurement equipment used in fabrication.

Similar Contracts

Same NAICS industry code

Medical Device Packaging and Government Marking ServicesThe contract requires specialized packaging and labeling services for medical devices to comply with U.S. government shipment and storage requirements, specifically mandating adherence to National Stock Number (NSN), Contract Line Item Number (CLIN), and contract number markings. Each unit must be clearly identified with a 2D Data Matrix barcode and properly marked for consignee identification to ensure accurate tracking and handling throughout the military supply chain. The work is to be performed at Fort Bragg, North Carolina, with a strict deadline for responses by August 17, 2026, and is classified as a subcontract under the NAICS code 811211, indicating a focus on medical equipment and supplies repair and maintenance services. The solicitation is issued under the Department of Defense through the Medical Supply Chain FSH office, emphasizing the critical nature of compliance with federal military logistics standards for timely and secure delivery of medical assets.

MEDICAL SUPPLY CHAIIN FSH

POSTED

about 8 hours ago

DEADLINE

Quality Assurance & Inspection Services (Post-Production)The contract requires independent inspection and verification services to ensure that supplied armrests conform to manufacturer specifications and comply with ISO 9001 quality management standards. The scope includes post-production evaluation to confirm product integrity, dimensional accuracy, material compliance, and adherence to documented requirements, with all findings documented in a formal destination inspection report. The inspection must be conducted at or near the final delivery point, ensuring that the armrests meet all technical and quality benchmarks prior to acceptance. This is a subcontract under a Total Small Business Set-Aside, designated for small businesses as defined by the SBA, with the NAICS code 811211 indicating repair and maintenance services. The solicitation is managed by the Department of Defense's ASC SUPPLIER OPER AE AND AF DIV, with performance required at Tinker AFB, Oklahoma, 73145-8000. The posting date is August 9, 2026, and responses must be submitted by August 17, 2026. The work supports defense supply chain quality assurance efforts, emphasizing traceability, compliance, and delivery readiness of components critical to military equipment.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 8 hours ago

DEADLINE

Military-Standard Marking and BarcodingThe contract requires the application of permanent markings and barcodes to military containers and items in full compliance with MIL-STD-129, ensuring accurate identification and traceability throughout the supply chain. This includes the placement of serialized labels and hazardous material indicators as mandated, with precision and adherence to federal defense standards. All work must be completed to support reliable inventory management, logistics operations, and safety protocols for defense assets. The opportunity is structured as a subcontract under the NAICS code 811211, with a response deadline of August 17, 2026, and a posting date of August 9, 2026. Performance is designated for New Cumberland, Pennsylvania, with a ZIP code of 17070-5002. The contracting entity is the ASC Supplier Oper AE and AF Division under the Department of Defense, and all submissions must be made through the designated DIBBS platform prior to the deadline to be considered.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 8 hours ago

DEADLINE

Quality Assurance & Government Inspection SupportThis contract requires full support for government inspection activities at the origin of production, ensuring all manufacturing and testing processes adhere strictly to AS9100, RQ039, and Department of Defense Logistics Agency technical specifications. Compliance with these standards must be maintained throughout the entire production lifecycle, with documented evidence and operational practices aligned to meet rigorous aerospace and defense quality benchmarks. The work is tied to a subcontract under the Department of Defense’s New Cumberland facility, with performance based at the ZIP code 17070-5002, and all activities must be executed in accordance with the established technical and procedural controls mandated by federal defense requirements. Responses are due by August 20, 2026, and the solicitation is linked to the DIBBS system under the NAICS code 811211, indicating a focus on repair and maintenance services supporting defense infrastructure.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 8 hours ago

DEADLINE

Military Asset Marking and UID/Barcode LabelingThe contract requires the application of permanent Unique Item Identification (UID) labels and 2D Data Matrix barcodes in strict accordance with MIL-STD-130N standards to ensure full traceability of V-belt units. This work is critical for maintaining durable, scannable, and compliant identification of military assets throughout their lifecycle, supporting logistics, maintenance, and inventory management across the Department of Defense. The labeling must be permanently affixed to withstand harsh operational environments and meet all technical specifications for data content, size, placement, and material durability as defined by the standard. The solicitation is classified as a subcontract under NAICS code 811211, with a response deadline of August 20, 2026, and a posted date of August 9, 2026. Performance is designated for New Cumberland, Pennsylvania, with the contracting agency identified as LAND SUPPLIER OPNS ENGINES within the Department of Defense. There is no set-aside designation, and the contract does not specify a point of contact, requiring potential bidders to refer to the official DIBBS portal link for additional submission details and requirements.

LAND SUPPLIER OPNS ENGINES

POSTED

about 8 hours ago

DEADLINE

Preventive and Remedial Medical Equipment MaintenanceThe contract is for preventive and remedial maintenance services on the Philips Azurion 7 M20 Cath Lab, requiring comprehensive mechanical, electrical, and software diagnostics to ensure ongoing operational compliance. Services must be performed on a scheduled basis as well as in response to urgent repair requests, with the goal of minimizing downtime and maintaining peak performance of the medical equipment. The work is to be carried out at the designated location in Shreveport, Louisiana, with a zip code of 71101. This subcontract falls under the NAICS code 811211, indicating it is related to medical equipment repair and maintenance. The opportunity was posted on August 8, 2026, and responses are due by August 14, 2026, at 3:00 PM. The contracting office is the 256-NETWORK Contract Office 16 (36C256) under the Department of Veterans Affairs.

256-NETWORK Contract Office 16 (36C256)

POSTED

DEADLINE

Medical Equipment Preventative Maintenance & Repair ServicesThe contract seeks a subcontractor to provide comprehensive annual onsite preventative maintenance and emergency repair services for ExacTrac X-Ray and Frameless SRS systems, ensuring optimal functionality and safety. Services include diagnostic evaluations, calibration, and replacement of critical components, all performed exclusively by manufacturer-trained and certified technicians to maintain system integrity and compliance with clinical standards. The scope emphasizes proactive care to minimize downtime and ensure uninterrupted operation in high-stakes radiation therapy environments. Issued by the Department of Veterans Affairs through the 248-NETWORK Contract Office 8, this subcontract is classified under NAICS code 811211 and requires response by August 12, 2026. The work is to be conducted at various locations where the equipment is deployed, with no specific geographic restriction indicated. The contract supports the ongoing operational readiness of advanced radiotherapy systems critical to veteran care, demanding adherence to rigorous technical protocols and prompt emergency response capabilities to safeguard patient safety and treatment continuity.

248-NETWORK Contract Office 8 (36C248)

POSTED

DEADLINE

Optometry Equipment Corrective MaintenanceThe contract titled Optometry Equipment Corrective Maintenance provides for on-demand repair services to address malfunctions in optometry equipment, encompassing troubleshooting, parts replacement, recalibration, and return to service. Services are required to ensure uninterrupted operation of critical medical devices used by the Albuquerque Area Indian Health Service, with all work to be performed at the specified place of performance in Zuni, New Mexico, 87327. The contract is structured as a subcontract under the Indian Small Business Economic Enterprise set-aside, which reserves this opportunity for qualified Native American small businesses to promote economic development within tribal communities. The NAICS code 811211 indicates the classification for medical and diagnostic equipment repair and maintenance, aligning the scope with specialized technical expertise in healthcare device servicing. The solicitation was posted on August 7, 2026, with a response deadline of August 20, 2026, at 9:00 PM Eastern Time, allowing eligible Indian Small Business Economic Enterprise firms a limited window to submit proposals. Although specific point of contact details and agency office address information are not provided, the contracting entity operates under the Department of Health and Human Services with a clear focus on sustaining optometric care delivery for Native American populations. Contractors must be prepared to respond rapidly to equipment failures, maintain stringent service standards, and comply with all federal contracting requirements applicable to set-aside programs, ensuring reliability and timely restoration of optometry services critical to patient care.

Albuquerque Area Indian Health Svc

POSTED

DEADLINE

Optometry Equipment Preventive MaintenanceThis contract outlines an annual preventive maintenance service for government-owned optometry equipment, requiring comprehensive inspection, cleaning, calibration, functional testing, electrical safety verification, and proper labeling in accordance with original equipment manufacturer guidelines. The work is to be performed at the Zuni location with a zip code of 87327 and is designated as a subcontract under the Indian Small Business Economic Enterprise set-aside, ensuring priority for qualified Indian-owned small businesses. The solicitation was posted on August 7, 2026, with a response deadline of August 20, 2026, under NAICS code 811211 for medical and dental equipment and supplies repair and maintenance. The performing agency is the Albuquerque Area Indian Health Service, operating under the Department of Health and Human Services, with all tasks aligned to maintain equipment reliability, safety, and compliance with OEM standards.

Albuquerque Area Indian Health Svc

POSTED

DEADLINE

On-Site Calibration and Diagnostics of Laboratory AnalyzersThe contract is for annual preventive maintenance, calibration, on-site diagnostics, and corrective actions to be performed on government-owned precision analyzers used in fuel testing at Point Loma in San Diego. Services must be provided on-site to ensure the continued accuracy and reliability of laboratory equipment critical to fuel quality assurance. The work falls under a Small Business Set Aside designation, meaning only small businesses are eligible to compete, and it is classified under NAICS code 811211 for industrial and commercial machinery and equipment repair and maintenance. The solicitation was posted on August 7, 2026, with responses due by August 11, 2026, and the contract is structured as a subcontract under the Department of Defense, specifically managed by the Navsup Fleet Logistics Center San Diego. All required services must align with federal standards for laboratory equipment maintenance and be performed in compliance with the operational demands of the fuel testing environment.

Navsup Flt Logistics Ctr San Diego

POSTED

DEADLINE

Battery System Testing and Maintenance ServicesThe contract encompasses specialized testing and maintenance services for uninterruptible power supply battery systems, requiring precise procedures such as ohmic testing, float voltage measurements, and connection resistance analysis to ensure system reliability and performance. These services are critical for maintaining operational readiness of power backup systems in mission-critical environments, with work to be performed at a location identified by zip code 73523. The solicitation is classified as a subcontract under NAICS code 811211, indicating it falls within the repair and maintenance services sector, and is managed by the Department of Defense under the agency designation FA4419 97 Conf Cc. Interested parties must submit responses by the deadline of August 18, 2026, at 6:00 PM, with the opportunity posted on August 7, 2026, through the official SAM.gov platform.

FA4419 97 Conf Cc

POSTED

DEADLINE

Small Business Subcontracting ParticipationThis contract opportunity allows small, disadvantaged, women-owned, and service-disabled veteran-owned businesses to serve as subcontractors under a prime contract that may be awarded to a larger business. The set-aside is designated as a partial small business set-aside, specifically targeting participation by qualifying small businesses in the subcontracting role rather than as prime contractors. The opportunity is tied to the NAICS code 811211, which corresponds to repair and maintenance services for commercial and institutional buildings, suggesting the underlying work involves facility support functions under the Department of Defense. The solicitation was posted on August 7, 2026, with a firm deadline for responses set for August 14, 2026, at 5:00 PM. The contracting activity is managed by MSCHQ Norfolk under the Department of Defense, and while specific performance locations and contact details are not provided, interested parties can access further information through the official SAM.gov portal linked in the solicitation.

POSTED

DEADLINE

More opportunities from Department Of Defense → FLUID HANDLING DIVISION

Same awarding agency

Surveying and Site LayoutThe contract calls for topographic surveying, boundary verification, and precise site layout services to support construction activities at a location in New Cumberland with a zip code of 17070-5002. These services are essential for ensuring accurate spatial data and proper alignment of infrastructure elements during the build phase. The work falls under NAICS code 541370, indicating it is classified as surveying and mapping services, and is structured as a subcontract under the Department of Defense’s Fluid Handling Division. The solicitation was posted on August 9, 2026, with a response deadline of August 20, 2026, requiring qualified vendors to submit proposals within that window. There is no set-aside designation specified, meaning the contract is open to all eligible subcontractors regardless of business size or status. The place of performance is fixed, and all services must be delivered on-site to meet project requirements.

Surveying and Mapping (except Geophysical) Services

POSTED

about 8 hours ago

DEADLINE

Paving and Asphalt ServicesThe contract pertains to paving and asphalt services for roadways, parking lots, and access roads, encompassing grading, base preparation, and asphalt placement. It is issued as a subcontract under the NAICS code 237310, which classifies it within the highway and street construction sector. The work is designated to be performed in New Cumberland, Pennsylvania, with a zip code of 17070-5002, and is managed by the Fluid Handling Division of the Department of Defense. The solicitation was posted on August 9, 2026, with a response deadline set for August 20, 2026. The contract does not specify a set-aside type nor include a point of contact, and all submissions must be made through the provided DIBBS portal link.

Highway, Street, and Bridge Construction

POSTED

about 8 hours ago

DEADLINE

Concrete Forming and PlacementThe contract titled Concrete Forming and Placement is a subcontract under the NAICS code 238110, issued by the Fluid Handling Division of the Department of Defense, seeking services for the forming, reinforcement, and pouring of structural concrete for foundations, slabs, and walls. The work is to be performed at a location in New Cumberland with a ZIP code of 17070-5002, and the solicitation was posted on August 9, 2026, with a firm response deadline of August 20, 2026. All work must meet structural and safety standards expected for defense-related construction, and bidders are expected to have the necessary expertise in concrete placement techniques, formwork assembly, and reinforcement installation. The contract is not set aside for specific small business categories and no point of contact information is provided; interested parties must reference the provided DIBBS link for full details and submission requirements.

Poured Concrete Foundation and Structure Contractors

POSTED

about 8 hours ago

DEADLINE

Plumbing and Piping Systems InstallationThe contract is for the installation of potable water, drainage, and sanitary piping systems in new or renovated facilities under the Fluid Handling Division of the Department of Defense. The work is to be performed at a location in New Cumberland with a zip code of 17070-5002 and falls under the NAICS code 238220, which classifies it as plumbing, heating, and air-conditioning contracting. This is a subcontract opportunity with a posted date of August 9, 2026, and a response deadline of August 20, 2026. All proposals must be submitted by the specified deadline to be considered, and the contract involves technical execution of essential building systems to meet operational and safety standards for federal facilities. The solicitation is accessible through the DIBBS platform for qualified subcontractors to review requirements and submit responses.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

about 8 hours ago

DEADLINE

Electrical Installation and Wiring ServicesThe contract titled Electrical Installation and Wiring Services is a subcontract under the NAICS code 238210, issued by the Department of Defense’s Fluid Handling Division, for the installation of electrical systems including conduits, wiring, panels, and lighting fixtures on commercial or infrastructure projects. The solicitation was posted on August 9, 2026, with a response deadline of August 20, 2026, and the work is to be performed at a designated location in New Cumberland, Pennsylvania, with a zip code of 17070-5002. All electrical components must be installed to meet federal and industry standards, ensuring safety, reliability, and compliance with applicable codes. The scope encompasses full-service electrical construction across project sites, requiring qualified subcontractors with proven experience in DOD-related infrastructure work. Proposals must be submitted through the designated DIBBS portal prior to the deadline, and contractors are expected to manage logistics, materials sourcing, and personnel deployment to meet contractual timelines and quality benchmarks.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

about 8 hours ago

DEADLINE

Supply of Self-Sealing Coupling Assembly (NSN: 4730010957032)

Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 8 hours ago

DEADLINE

Defense-Compliant Packaging and Marking ServicesThe contract requires full compliance with military specifications for packaging, preservation, and marking of defense-related materials, adhering strictly to MIL-STD-129 and MIL-STD-2073-1E standards. Preservation must follow Method AE, ensuring long-term protection of equipment and components during storage and transit. All items must be accurately marked and documented to meet Department of Defense requirements for traceability, identification, and logistical handling. The work is designated as a subcontract under NAICS code 561910 and is scoped for performance at Texarkana, TX, with a delivery destination of the 75507-5000 ZIP code area. The solicitation was posted on August 9, 2026, and responses are due by August 20, 2026, with no set-aside classification specified. The contracting entity is the Fluid Handling Division under the Department of Defense, and the submission must be made through the DIBBS platform using the referenced solicitation link.

Packaging and Labeling Services

POSTED

about 8 hours ago

DEADLINE

Hazardous Materials Compliance and SDS ManagementThe contract requires the identification of hazardous materials and the development of OSHA-compliant Safety Data Sheets in accordance with 29 CFR 1910.1200 and Defense Federal Acquisition Regulation Supplement requirements. The work involves ensuring all chemical substances used or handled within the scope of the project are properly classified, documented, and reported to meet federal safety and regulatory standards. The vendor must possess expertise in chemical hazard evaluation and SDS preparation, with a clear understanding of both OSHA’s Hazard Communication Standard and Department of Defense procurement mandates. The contract is classified as a subcontract with a NAICS code of 541690, indicating it falls under Other Scientific and Technical Consulting Services. Performance is located in Texarkana, Texas, with a ZIP code of 75507-5000. The solicitation was posted on August 9, 2026, and responses are due by August 20, 2026. The contracting activity is under the Fluid Handling Division of the Department of Defense, and all deliverables must align with federal compliance expectations to support safe handling, storage, and transportation of hazardous materials within military operations.

Other Scientific and Technical Consulting Services

POSTED

about 8 hours ago

DEADLINE

Metal Tube Assembly Fabrication and ManufacturingThe contract involves the fabrication and manufacturing of 20 defense-grade metal tube assemblies under stringent quality and compliance standards, including adherence to Qualified Products List and Qualified Manufacturer List specifications. Each assembly must meet precise dimensional tolerances and undergo rigorous origin inspection to ensure component authenticity and suitability for military applications. The work is classified as a subcontract under NAICS code 332999 and is being managed by the Fluid Handling Division of the Department of Defense, with performance required at the specified location in Texarkana, Texas, ZIP 75507-5000. All materials and processes must align with federal defense procurement criteria, and the submission deadline for proposals is August 20, 2026, with the solicitation posted on August 9, 2026.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 8 hours ago

DEADLINE

Transportation and Delivery to DLA Cherry Point, NC (FOB Origin)This contract entails the transportation and delivery of freight from the origin point to DLA Cherry Point, North Carolina, under FOB Origin terms, meaning responsibility for the shipment transfers to the buyer once goods are loaded at the origin. The contractor must comply with all requirements for WAWF-compliant receiving reporting to ensure accurate and timely documentation of delivery acceptance. The solicitation is a subcontract classified as a Total Small Business Set-Aside under SBA guidelines, reserved exclusively for small businesses as defined by the SBA and FAR 19.5. The NAICS code 484220 specifies the nature of the work as freight trucking, highlighting the focus on ground transportation logistics. The awarding agency is the Department of Defense, specifically the Fluid Handling Division, with performance required at the designated delivery location in Cherry Point, NC, ZIP code 28533-5040. Responses must be submitted by the deadline of August 20, 2026, with the opportunity posted on August 9, 2026, and further details accessible through the official DIBBS portal link.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 8 hours ago

DEADLINE

Military-Compliant Packaging and Labeling ServicesThe contract requires comprehensive packaging and labeling services for clamp units strictly in compliance with MIL-STD-129, RP001, and ASTM D3951 standards, ensuring all markings, barcoding, and documentation meet rigorous military specifications. The work includes proper palletization and secure packaging to guarantee safe handling and transport, with full adherence to labeling requirements for logistics and inventory tracking throughout the defense supply chain. All submissions must reflect precise execution of these standards without deviation, as noncompliance will result in rejection. This is a total small business set-aside subcontract under NAICS code 423840, issued by the Fluid Handling Division of the Department of Defense, and is exclusive to small business concerns. The solicitation was posted on August 9, 2026, with a response deadline of August 20, 2026. Performance of the work is centered at Cherry Point, North Carolina, zip code 28533-5040, and bidders must be prepared to meet all requirements in full, including documentation, timelines, and quality controls, without the benefit of government oversight beyond compliance verification.

Industrial Supplies Merchant Wholesalers

POSTED

about 8 hours ago

DEADLINE

Hazardous Materials Compliance and Safety Data Sheet (SDS) ManagementThe contract seeks a small business to provide comprehensive Hazardous Materials Compliance and Safety Data Sheet (SDS) Management services for the Department of Defense’s Fluid Handling Division, specifically supporting operations at Cherry Point, North Carolina, with a zip code of 28533-5040. The primary responsibility involves the identification, preparation, and timely submission of SDS documents that fully comply with Occupational Safety and Health Administration (OSHA) and Department of Defense regulations, ensuring all hazardous materials used or handled are accurately documented. The contractor must also maintain ongoing updates to SDS records to reflect any changes in material composition, handling procedures, or regulatory requirements, guaranteeing continuous compliance. This subcontract is set aside exclusively for small businesses under the SBA’s Total Small Business Set-Aside provision, indicating it is reserved for businesses classified as small under NAICS code 541690, which covers other scientific and technical consulting services. The solicitation was posted on August 9, 2026, with responses due by August 20, 2026, and is managed through the DIBBS platform under the solicitation number SPE7M426T327U. The work is performance-based, requiring precise adherence to federal safety standards, with no specific point of contact listed, implying that all inquiries and submissions must be directed through the official DIBBS portal.

Other Scientific and Technical Consulting Services

POSTED

about 8 hours ago

DEADLINE