Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Battery System Testing and Maintenance Services

Active

Federal

Response Deadline08/18/2026, 06:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract encompasses specialized testing and maintenance services for uninterruptible power supply battery systems, requiring precise procedures such as ohmic testing, float voltage measurements, and connection resistance analysis to ensure system reliability and performance. These services are critical for maintaining operational readiness of power backup systems in mission-critical environments, with work to be performed at a location identified by zip code 73523. The solicitation is classified as a subcontract under NAICS code 811211, indicating it falls within the repair and maintenance services sector, and is managed by the Department of Defense under the agency designation FA4419 97 Conf Cc. Interested parties must submit responses by the deadline of August 18, 2026, at 6:00 PM, with the opportunity posted on August 7, 2026, through the official SAM.gov platform.

General Info

Specialized battery system testing and maintenance at 73523 for DoD, due August 18, 2026.

Agency

Department Of Defense → FA4419 97 Conf CcView Agency

NAICS

811211 - Consumer Electronics Repair and MaintenanceView NAICS

Place of Performance

OK, 73523, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 7

subcontract

Response DeadlineAug 18

Submission deadline

Response Deadline

08/18/2026, 06:00:00 PM UTCin 10 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → FA4419 97 Conf Cc

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → FA4419 97 Conf Cc

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Specialized testing and maintenance of UPS battery systems including ohmic testing, float voltage checks, and connection resistance measurements.

Similar Contracts

Same NAICS industry code

Medical Equipment Preventative Maintenance & Repair ServicesThe contract seeks a subcontractor to provide comprehensive annual onsite preventative maintenance and emergency repair services for ExacTrac X-Ray and Frameless SRS systems, ensuring optimal functionality and safety. Services include diagnostic evaluations, calibration, and replacement of critical components, all performed exclusively by manufacturer-trained and certified technicians to maintain system integrity and compliance with clinical standards. The scope emphasizes proactive care to minimize downtime and ensure uninterrupted operation in high-stakes radiation therapy environments. Issued by the Department of Veterans Affairs through the 248-NETWORK Contract Office 8, this subcontract is classified under NAICS code 811211 and requires response by August 12, 2026. The work is to be conducted at various locations where the equipment is deployed, with no specific geographic restriction indicated. The contract supports the ongoing operational readiness of advanced radiotherapy systems critical to veteran care, demanding adherence to rigorous technical protocols and prompt emergency response capabilities to safeguard patient safety and treatment continuity.

248-NETWORK Contract Office 8 (36C248)

POSTED

DEADLINE

On-Site Calibration and Diagnostics of Laboratory AnalyzersThe contract is for annual preventive maintenance, calibration, on-site diagnostics, and corrective actions to be performed on government-owned precision analyzers used in fuel testing at Point Loma in San Diego. Services must be provided on-site to ensure the continued accuracy and reliability of laboratory equipment critical to fuel quality assurance. The work falls under a Small Business Set Aside designation, meaning only small businesses are eligible to compete, and it is classified under NAICS code 811211 for industrial and commercial machinery and equipment repair and maintenance. The solicitation was posted on August 7, 2026, with responses due by August 11, 2026, and the contract is structured as a subcontract under the Department of Defense, specifically managed by the Navsup Fleet Logistics Center San Diego. All required services must align with federal standards for laboratory equipment maintenance and be performed in compliance with the operational demands of the fuel testing environment.

Navsup Flt Logistics Ctr San Diego

POSTED

DEADLINE

Factory-Authorized Technical Service Support (Subcontractor Role)A Sartorius-certified field service engineer will be engaged to provide on-site technical labor for the diagnostics, repair, and performance validation of the CompacT S platform under a subcontract arrangement. The work requires certified expertise to ensure systems are restored to optimal functionality and meet manufacturer specifications through accurate troubleshooting and validated testing procedures. The contract is issued under the National Institutes of Health Olao, part of the Department of Health and Human Services, with a solicitation posted on August 7, 2026, and responses due by August 24, 2026. The NAICS code 811211 reflects alignment with equipment repair and maintenance services. Performance location details are not specified, but services must be delivered on-site at the equipment’s location. The subcontractor must adhere to Sartorius certification standards and deliver services that maintain regulatory compliance and operational reliability without deviation.

National Institutes Of Health Olao

POSTED

DEADLINE

Precision Calibration of Air Data Test Set Calibrator (ADC-2500V3)The contract involves the full calibration of the ADC-2500V3 Air Data Test Set Calibrator to restore it to Ready-for-Issue condition, in strict accordance with the original equipment manufacturer’s checklists and test acceptance criteria. This includes comprehensive functional testing, precise sensor calibration, and thorough documentation to ensure performance meets all required specifications. The work must be executed with high precision to guarantee the unit’s accuracy and reliability for operational use. The solicitation is classified as a subcontract under NAICS code 811211 and is issued by the Aviation Logistics Center within the Department of Homeland Security. The place of performance is located in Peterborough, New Hampshire, with a zip code of 03458. Interested parties must submit their responses by August 15, 2026, at 3:59 a.m. Eastern Time, following the posting date of August 7, 2026. No set-aside provisions are specified, and the contract does not include a designated point of contact.

Aviation Logistics Center (ALC)(00038)

POSTED

DEADLINE

Warranty and Maintenance SupportThis contract provides one year of comprehensive technical support, maintenance, and warranty services for equipment and systems, encompassing both remote diagnostics and on-site repair capabilities. The scope ensures continuous operational reliability through timely identification and resolution of technical issues, with responders authorized to perform hands-on corrections at the location of use when remote remediation is insufficient. The service is structured under a subcontract type, with the NAICS code 811211 indicating a focus on electronic and precision equipment repair and maintenance. The offering is issued by the Department of Veterans Affairs through the Network Contract Office 19, with the solicitation posted on August 7, 2026, and responses due by August 14, 2026. Performance location details are not specified, but the support is expected to be delivered wherever the covered equipment is deployed. No set-aside provisions or point of contact information are included in the data provided.

Network Contract Office 19 (36C259)

POSTED

DEADLINE

Facilities and Office Space ManagementThe contract concerns the leasing and management of clinical office space dedicated to the delivery of OB-GYN services, encompassing responsibilities for rent, utilities, and routine maintenance to ensure operational readiness. This subcontract is issued by the New Mexico Human Services Department under NAICS code 811211, which corresponds to other personal care services, and is open for proposal until September 11, 2026. The space must be fully equipped and maintained to support high-quality maternal and reproductive healthcare delivery, though specific location details are not provided. All associated operational costs and facility upkeep are included in the scope, requiring the contractor to manage the premises comprehensively to meet clinical standards and service requirements. The opportunity is posted on the New Mexico HSD BonfireHub platform, with no set-aside classification indicated.

New Mexico Human Services Department

POSTED

DEADLINE

in about 1 month

On-Demand Repair and Technical Support

National Institutes Of Health Olao

POSTED

DEADLINE

Emergency and Remedial Repair Services for Scientific Instruments

National Institutes Of Health Olao

POSTED

DEADLINE

On-Site Preventative Maintenance Services for Biomedical Equipment

National Institutes Of Health Olao

POSTED

DEADLINE

Preventive Maintenance and Service Support Plans

Sac Frederick (36C10X)

POSTED

DEADLINE

In-Country Warranty and Repair Support Services

US Embassy Panama City

POSTED

DEADLINE

Biomedical Equipment Maintenance and Calibration ServicesThe contract requires the performance of scheduled and on-demand maintenance, calibration, and repair services for V.A.C. ULTA™ Therapy Units, ensuring full compliance with manufacturer specifications and FDA regulatory standards. All service activities must include detailed service logging and support for warranty claims to maintain device functionality, safety, and regulatory adherence. The work is classified under NAICS code 811211 for medical equipment and supplies merchant wholesalers and is structured as a subcontract under the Department of Veterans Affairs’ 247-NETWORK Contract Office 7. Services must be delivered in alignment with federal healthcare device requirements, with all tasks documented thoroughly to support audit readiness and equipment lifecycle management. The solicitation was posted on August 6, 2026, with a response deadline of August 11, 2026, and the performance location is not specified, implying potential national scope.

247-NETWORK Contract Office 7 (36C247)

POSTED

DEADLINE

More opportunities from Department Of Defense → FA4419 97 Conf Cc

Same awarding agency

Environmental and Site Compliance MonitoringThe contract entails routine environmental and site compliance monitoring at Altus Air Force Base to maintain optimal performance of uninterruptible power supply systems. This includes the continuous inspection and documentation of ambient temperature levels, air filter condition, overall cleanliness, and general site conditions to ensure the UPS infrastructure remains within operational specifications and free from contaminants or environmental stressors that could impact reliability. The work is required to be performed at a location with the zip code 73523 and is classified under the NAICS code 561790, indicating it falls under other support activities for buildings and other structures. This is a subcontract opportunity with a response deadline of August 18, 2026, and was posted on August 7, 2026. It is managed under the Department of Defense via the office designation FA4419 97 Conf Cc, and all activities must align with military standards for facility and equipment support. While specific performance metrics or frequency of inspections are not outlined, the scope implies a consistent, disciplined approach to environmental control and documentation to safeguard critical power systems. No set-aside classification has been specified, and the point of contact details are not provided in the solicitation.

Other Services to Buildings and Dwellings

POSTED

DEADLINE

Spare Parts and Component Supply for Eaton 9390-40-80 UPSThe contract is for the supply of OEM or Eaton-authorized spare parts essential for the maintenance and repair of military uninterruptible power supply systems, specifically the Eaton 9390-40-80 model. Included components are critical power system elements such as power modules, capacitors, circuit boards, and battery assemblies, all required to meet stringent performance and durability standards for defense applications. The supply must ensure full compatibility and reliability under operational military conditions, with parts sourced exclusively through authorized channels to guarantee authenticity and quality. This is a subcontract opportunity with a response deadline of August 18, 2026, and was posted on August 7, 2026. The North American Industry Classification System code 423690 applies, indicating it falls under miscellaneous durable goods merchant wholesalers. Performance is to be carried out at a location with a ZIP code of 73523, consistent with Department of Defense logistics and support structures. The contract is managed under the FA4419 97 Conf Cc office, emphasizing its alignment with defense procurement protocols and supply chain integrity requirements, though no specific set-aside provisions or point of contact are provided.

Other Electronic Parts and Equipment Merchant Wholesalers

POSTED

DEADLINE

Emergency Response and Corrective Maintenance SupportThe contract, titled Emergency Response and Corrective Maintenance Support, mandates immediate 7x24 on-demand response to UPS failures with full fault isolation, component replacement, and system restoration to ensure uninterrupted operation. The work must be performed promptly and reliably at the designated location with zip code 73523, where the contractor is expected to maintain system availability and resolve critical power infrastructure failures without delay. The scope demands technical expertise in diagnosing and correcting UPS-related issues under any conditions, reflecting the critical nature of the supported systems. This subcontract is issued under NAICS code 811212 and was posted on August 7, 2026, with responses due by August 18, 2026, at 6:00 PM. It is managed by the Department of Defense through the agency designation FA4419 97 Conf Cc, indicating a federal procurement activity tied to national security or defense infrastructure. The contract does not specify a set-aside type or point of contact, and performance must occur regardless of time or day, emphasizing the requirement for continuous readiness and rapid recovery capabilities to support mission-critical operations.

Computer and Office Machine Repair and Maintenance

POSTED

DEADLINE

On-Site Technical Diagnostics and Operational Parameter VerificationThe contract involves performing on-site technical diagnostics and operational parameter verification for UPS systems, requiring detailed inspection of inverter and rectifier balance, AC and DC protection settings, power waveform integrity, and environmental conditions to ensure system reliability and compliance with operational standards. All work must be conducted physically at the designated location with a zip code of 73523, where qualified personnel will assess and validate the performance of critical power infrastructure components under real-world conditions. This subcontract, classified under NAICS code 541330, is issued by the Department of Defense through the agency designation FA4419 97 Conf Cc and requires proposals to be submitted by the deadline of August 18, 2026, with the solicitation posted on August 7, 2026. The scope demands technical expertise in power systems diagnostics with a focus on precision measurement and verification, and no set-aside provisions apply to this opportunity. Response submissions must be made through the designated SAM.gov portal.

Engineering Services

POSTED

DEADLINE

On-Site Preventive & Corrective Maintenance for Eaton 9390-40-80 UPS SystemsThe contract outlines the lifecycle maintenance of Eaton 9390-40-80 uninterruptible power supply units at Altus Air Force Base, requiring comprehensive on-site support including round-the-clock preventive maintenance, system diagnostics, and emergency corrective repairs. All services must be delivered continuously, seven days a week, twenty-four hours a day, to ensure mission-critical power reliability at the facility. The work is governed under NAICS code 811212, indicating it falls under repair and maintenance services for electrical equipment, and is structured as a subcontract under the Department of Defense, specifically managed by the FA4419 97 Conf Cc office. Performance is required at the location with the zip code 73523, and responses to the solicitation are due by August 18, 2026, with the opportunity posted on August 7, 2026.

Computer and Office Machine Repair and Maintenance

POSTED

DEADLINE

FY26 97 OG OSS EATON UPS MAINTENANCE

Solicitation # FA441926Q0049

The 97th Operations Support Squadron requires preventive maintenance and service support for two Eaton 3-phase UPS systems located at buildings 530 and 550 on Altus Air Force Base, with the contract covering parts, labor, seven-day-a-week battery maintenance, best-effort eight-hour response times, and technical support. The service is intended to be provided under a sole source award to Eaton Corporation due to its exclusive ownership of the proprietary software required to service these specific UPS units, making it the only qualified provider. The base contract period is one year, with an option to extend for an additional four months. This action is authorized under RFO 6.103-1 and 10 U.S.C. 3204(a)(1), and is not open to competitive bidding. Interested parties must submit a capability statement containing detailed technical and cost information demonstrating their ability to meet the requirement, submitted exclusively via email in Microsoft Word or Adobe PDF format to two designated points of contact by August 18, 2026, at 1:00 PM CDT. Late submissions will not be accepted, and inquiries that do not include full capability documentation will not be considered. The government retains full discretion to determine whether to proceed with a sole source award or reopen competition based on responses received.

Electronic and Precision Equipment Repair and Maintenance

POSTED

DEADLINE

97 LRS Vehicle Maintenance Tool Kits

Solicitation # FA441926Q0046

The 97th Logistics Readiness Squadron at Altus Air Force Base is seeking five comprehensive, mobile, and secure general mechanics hand tool kits equivalent to or exceeding the Snap-On KTL1022APBO model, to support maintenance of its fleet of 372 vehicles. This solicitation, issued under the solicitation number FA441926Q0046, is a combined synopsis and request for quotation for commercial items under FAR Subpart 12.2, structured as a Firm-Fixed-Price contract. The requirement is set aside 100% for small business concerns under NAICS code 332510 with a size standard of 750 employees, and all offerors must be currently registered in the System for Award Management (SAM) with a valid Unique Entity ID to be eligible for award. Funding is not currently available, and no award will be made until funds are appropriated; the government reserves the right to cancel the solicitation at any time without financial obligation to offerors. Deliverables must comply strictly with the technical specifications detailed in Attachment 1, which defines the exact component layout, ergonomics, and security features, and proposals must be submitted electronically via email by August 18, 2026, at 1600 CST. Evaluation will follow a Lowest Price Technically Acceptable (LPTA) approach, where offers must first be deemed technically acceptable based on conformance to Attachment 1, and then the lowest-priced acceptable offer will be selected. Delivery is required within 150 days after receipt of order, with F.O.B. Destination terms at Altus AFB, Oklahoma, and inspection and acceptance will be performed by the Government at that location. Payment will be processed exclusively through the Wide Area WorkFlow system, and all submissions must be in English and denominated in U.S. dollars. The solicitation incorporates several FAR/DFARS clauses including provisions on whistleblower rights, compensation reporting for former DoD officials, child labor compliance, security prohibitions, and restrictions on covered telecommunications equipment. Contractors must also affirm compliance with restrictions on ozone-depleting substances and comply with all applicable socioeconomic certifications and representations, including size status and potential disclosures related to telecommunications equipment. No contract value is available as pricing fields are unpopulated and funding has not been secured.

Hardware Manufacturing

POSTED

DEADLINE

Supply of 60-Inch Diamond Blade for Concrete SawThe contract is for the supply of a single 60-inch diamond blade designed to be compatible with a specified walk-behind concrete saw, ensuring suitability for both wet and dry cutting applications on concrete surfaces. This procurement is classified as a subcontract under a Small Business Set Aside designation, exclusively reserved for small businesses, with the North American Industry Classification System code 332313 indicating it falls under the manufacturing of cutlery, hand tools, and general hardware. The solicitation was posted on August 4, 2026, with a mandatory response deadline of August 19, 2026, at 5:30 PM. Performance of the contract is required at Altus, Oklahoma, with a zip code of 73521. The contracting agency is the Department of Defense, specifically identified under the office FA4419 97 Conf Cc, and the opportunity is accessible through the SAM.gov platform for interested small business vendors.

Plate Work Manufacturing

POSTED

DEADLINE

Supply of Commercial-Grade Walk-Behind Concrete SawThe contract seeks the supply of a commercial-grade, diesel-powered, heavy-duty walk-behind concrete saw designed for demanding construction and demolition applications. The equipment must feature a 60-inch blade capacity and a 25-inch cutting depth, capable of operating in both wet and dry modes to accommodate varying job site conditions. It is intended for use in high-intensity environments where precision, durability, and consistent performance are critical. The contract is categorized as a subcontract under a Small Business Set Aside, ensuring eligibility is restricted to businesses certified as small under SBA guidelines, with the NAICS code 333120 specifically identifying the industrial classification for construction machinery manufacturing. The solicitation was posted on August 4, 2026, with a response deadline of August 19, 2026, at 5:30 p.m. The place of performance is designated as Altus, Oklahoma, with a zip code of 73521, indicating the equipment will be delivered and utilized at a Department of Defense facility in that location. The contracting office is under the FA4419 97 Conf Cc, part of the Department of Defense procurement structure. Interested parties must respond through the official SAM.gov portal prior to the deadline to be considered for award, and all submissions must fully meet the technical specifications and small business eligibility requirements outlined in the solicitation.

Construction Machinery Manufacturing

POSTED

DEADLINE

60" Concrete Saw & Diamond Blade

Solicitation # FA441926Q0029

The 97th Contracting Squadron at Altus Air Force Base, Oklahoma, intends to issue a Request for Quote for a heavy-duty walk-behind 60-inch concrete saw equipped with a diamond blade capable of a 25-inch cutting depth to support full-depth rigid pavement repairs on military airfields including runways, taxiways, and aprons. The solicitation is designated as a Small Business Set Aside - Total under NAICS code 333991 and is identified by solicitation number FA441926Q0029. Although the solicitation is posted, no funds are currently available for this effort, and no award will be made until funding is secured; the government reserves the right to cancel the solicitation at any time without obligation to reimburse offerors for any incurred costs. All submissions must be made through the SAM.gov website, and contractors must be registered in the System for Award Management with a Valid Unique Entity ID prior to proposal submission. Failure to register will render an offeror ineligible for award. The response deadline is August 19, 2026, at 5:30 PM CST. Questions must be submitted in writing or via email to Phillip Chambers or Scott Swain no later than August 12, 2026, at 4:00 PM CST. The place of performance is Altus, Oklahoma.

Power-Driven Handtool Manufacturing

POSTED

DEADLINE

Supply of General Mechanics Tool Kits (Snap-On Equivalent)The contract is for the supply of five mobile, secure, general mechanics hand tool kits that must be equivalent to or exceed the specifications of the Snap-On KTL1022APBO model, including all components detailed in Attachment 1. These kits are intended for use in field maintenance operations and must meet stringent standards for durability, organization, and security. The solicitation is designated as a Small Business Set Aside under the SBA program, meaning only eligible small businesses may submit proposals, and the NAICS code 332215 classifies the requirement under hand and edge tool manufacturing. The opportunity was posted on August 3, 2026, with a firm response deadline of August 18, 2026, at 9:00 PM. The contract is structured as a subcontract and will be performed at a location with a zip code of 73523, though the specific city and state are not provided. The contracting entity is the Department of Defense under the office designation FA4419 97 Conf Cc. Interested parties must submit proposals through the official SAM.gov portal linked in the contract data, and the procurement is focused exclusively on securing high-quality, field-ready tool kits that ensure operational readiness and efficiency.

Metal Kitchen Cookware, Utensil, Cutlery, and Flatware (except Precious) Manufacturing

POSTED

DEADLINE

KC-46 Thrust Reverser Plug Set

Solicitation # FA4419-26-Q-0015

The 97th Contracting Squadron at Altus Air Force Base, Oklahoma, is soliciting quotes for 12 LMC18M87 Thrust Reverse Plug Sets, each designed for the PW4000 engine on KC-46 aircraft, under solicitation FA4419-26-Q-0015. This acquisition is a 100% Small Business Set Aside under NAICS code 336411, exclusively available to registered small businesses, and requires all offerors to maintain active registration in the System for Award Management (SAM) with a valid Unique Entity ID (UEI) to be eligible for award. The solicitation is structured as a combined synopsis and request for quote using commercial item procedures under FAR Subpart 12.6, and while funds are not currently available, any awarded contract would be firm-fixed-price with delivery to Altus AFB under FOB destination terms. The evaluation process will follow a lowest price technically acceptable (LPTA) methodology, where technical acceptability is determined by binary assessment—acceptable or unacceptable—based on adherence to specified salient characteristics, primarily the two-piece semi-circle configuration of the plug sets, with price being the sole determining factor among technically acceptable offers. All submissions must be delivered electronically by the deadline of August 14, 2026, at 2100 CST to the designated point of contact, and must include a completed pricing schedule and technical documentation that clearly demonstrates compliance without merely restating requirements. Contractors must comply with a comprehensive set of federal clauses and statutory requirements, including restrictions on procuring goods or services linked to the Xinjiang Uyghur Autonomous Region, prohibitions on certain defense telecommunications equipment as outlined in Section 889 of the NDAA, and mandatory reporting of executive compensation and subcontract awards. Invoicing and payment must be conducted exclusively via the Wide Area Workflow (WAWF) system using specified DoDAAC codes for routing, and all deliverables are subject to government inspection and acceptance at the destination. Compliance with representations regarding child labor, trafficking in persons, convict labor, and whistleblower protections is required, and offerors must affirmatively disclose any use of equipment or services linked to covered entities under federal sanctions. No packaging, preservation, or marking specifications are provided beyond the requirement for conforming commercial items, and no detailed delivery timeline or pricing data is available in the solicitation documents, though attachments outline evaluation factors, clauses, instructions, and clarifications

Aircraft Manufacturing

POSTED

DEADLINE