Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

NONMETALLIC SPECIAL

Active
SPE8E5-26-T-3597Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the procurement of 308 feet of nonmetallic special shaped section with a minimum length of 10 feet, manufactured in compliance with Boeing Material Specification BMS 1-11J Grade 60. The item, identified by NSN 9390-00-659-9033, is subject to export control under either ITAR or EAR, requiring prior authorization from the Department of State or Department of Commerce for any export, including disclosure to foreign persons whether inside or outside the U.S. Compliance with DFARS 252.225-7048 is mandatory, and distribution of technical data is restricted to DLA contractors with approved JCP certification, completed training on handling export-controlled data, and formal authorization by DLA. Packaging and marking must adhere to MIL-STD-129 and ASTM D3951 for non-hazardous materials, while hazardous materials require compliance with TQ requirement IP025 and the Hazard Communication Standard (29 CFR 1910.1200). Palletization must follow RP001: DLA Packaging Requirements for Procurement, and the unit of issue is QUP 001. The material is to be delivered FOB destination to Tinker AFB, OK 73145-8000, with a deadline of 132 days ADO, corresponding to a required delivery date of November 29, 2026, and need ship date of December 7, 2026. Payment and invoicing must be submitted electronically via Wide Area Workflow (WAWF), with invoices and receiving reports required for fixed-price line items and cost vouchers for cost-type items, following DFARS Appendix F standards. Offerors must be registered in the System for Award Management, comply with the Berry Amendment and Buy American Act, and certify their small business status, including representations for joint ventures and women-owned or economically disadvantaged women-owned businesses. All contractors must validate and maintain accurate SAM representations and certifications. The solicitation is a request for quotations with a response deadline of July 27, 2026, and incorporates multiple FAR and DFARS clauses governing contractual administration, equal opportunity, trafficking in persons, information safeguarding, NIST SP 800-171 compliance, prohibited materials such as hexavalent chromium and radioactive substances, and restrictions on mandatory arbitration agreements. The procuring

General Info

Procure 308 feet of BMS 1-11J Grade 60 nonmetallic section, FOB Tinker AFB, delivery by Nov 29, 2026, export-controlled, SAM registered, WAWF invoicing.

Agency

Department Of Defense → DEPOT OKLAHOMAView Agency

NAICS

325212 - Synthetic Rubber ManufacturingView NAICS

Place of Performance

3301 F AVE CEN REC BLDG 506 DR 22, TINKER AFB, OK, 73145-8000, US

Set-Aside

NONE

Documents

(1)

RFQ SPE8E5-26-T-3597 for DLA Troop Support Construction & Equipment

PDFrfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DEPOT OKLAHOMA
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → DEPOT OKLAHOMA
View Agency Profile
Office AddressUS

Full Description

Show more
NONMETALLIC SPECIAL
NONMETALLIC SPECIAL SHPAED SECTION,
10 FT MINIMUM LENGTH
MATERIAL SHALL BE IAW WITH BOEING MATL SPEC BMS 1-11J GRADE 60
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 9390-00-659-9033 Quantity: 308 FT Purchase Request: 7017122697QTY: 308 Delivery: 132 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 325212
New
Federal
S351 and S354 Dam Gate Seal Assembly SetsThe U.S. Army Corps of Engineers, Jacksonville District, is soliciting commercial bids for five dam gate seal assembly sets—three S351 and two S354—under solicitation number W19EP26QA015. These seals are specialized rubber assemblies requiring strict material properties including a durometer of 60–70, tensile strength of 3000 PSI, minimum elongation of 450%, and low water absorption capped at 5%. Both seal types feature J-bulb top and side profiles with PTFE cladding, VOSB molded corners, and hot-vulcanized splices to precise dimensions, while the bottom seals are flat and one inch thick. The S351 seals measure 20 feet 9-3/4 inches wide by 8 feet high, and the S354 seals are 24 feet 2 inches wide by 8 feet 9-5/8 inches high. No bolt holes are allowed, and fabrication must follow USACE-provided technical prints to ensure exact fit and function. All completed assemblies must be securely packaged in protective wooden crates and shipped to Clewiston, Florida, without damage during transit. Packaging and shipping instructions are critical to maintain seal integrity, and estimated shipping details are included in the solicitation for vendor quoting. Responses are due by July 31, 2026, at 9 AM EST, with questions to be submitted by July 24, 2026, at the same time. There is no small business or other set-aside for this acquisition, and it is being handled as a commercial items solicitation under FAR Part 12. Contact for inquiries is Kelly Koger, Contract Specialist, and Dustin Furrey, Contracting Officer, both of the U.S. Army Corps of Engineers, Jacksonville District.
W074 Endist Jacksnvlle

POSTED

3 days ago

DEADLINE

in 8 days
View Details

More opportunities from Department Of Defense → DEPOT OKLAHOMA

Same awarding agency

NAICS: 423510
New
DIBBS
PLATE, METALThis contract specifies the procurement of 6 plate meters of corrosion-resistant, aircraft-quality steel plate made from alloy 4340, hot rolled and annealed, with a thickness of 0.500 inches, width of 36 inches, and length of 96 inches, delivered in whole-foot increments. The material must comply with technical and quality standards referenced in the DLA Master List, including SAE AMS6359, ASTM A700-14, MIL-STD-129R, and SAE AMS2807C, and must be accompanied by a Certificate of Quality Compliance with every shipment, submitted to the DLA Troop Support Contracting Officer. Each unit must be permanently marked with the DLA contract number, NSN, specification revision, alloy and temper, manufacturer’s name, heat and lot numbers, and dimensions using approved methods such as stenciling or stamping, ensuring legibility and resistance to fading or contamination. Adhesive labels are required for smaller bars and tubes, and all packaging must conform to MIL-STD-2073-1E and DLA packaging requirements, with preservation methods per ASTM A700 and marking per MIL-STD-129. Only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible to respond, and any deviations must be explicitly declared; non-compliant submissions are considered unauthorized substitutions with potential criminal and civil penalties. The contract includes a firm fixed price with zero variance tolerance, destination inspection and acceptance points, and FOB origin delivery terms with a 30-day allowable delivery window after award. The material must be palletized and packed to prevent physical damage, using clean, dry cushioning materials compatible with the product, and all shipments must include dual-unit quantity markings if applicable. The designated delivery location is the DLA Distribution Depot in Tinker AFB, Oklahoma, and the procurement is governed by DLA procedural notes regarding transportation and government use, with a material need date of July 1, 2026. All documentation, including CDRL-METALSCERT and quality conformance records, must align with the referenced Technical Data Package revisions and DLA directives.
Metal Service Centers and Other Metal Merchant Wholesalers

POSTED

about 10 hours ago

DEADLINE

in 5 days
View Details
NAICS: 332313
New
DIBBS
PLATE, IDENTIFICATIONThe contract specifies the procurement of 200 identification plates under NSN 9905-01-294-5317 with a delivery requirement of 150 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. Packaging must comply with DLA standards, and non-accepted supplies must have government identification removed. Documentation for source approval requests must adhere to specified protocols, and covered defense information is subject to strict handling requirements under RD002. Sampling procedures must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated; critical, major, and minor attributes are assigned verification levels or AQLs as defined. Technical data associated with the item is subject to export controls under ITAR or EAR, and disclosure to foreign persons—regardless of location—is prohibited without authorization. Only contractors with approved US/Canada Joint Certification Program status, completed DOD export control training, and DLA authorization may access the technical data. Drawings are available exclusively during the open solicitation period via the DIBBS portal. The award date is set for July 28, 2026, with Tasha Robinson designated as the primary point of contact.
Plate Work Manufacturing

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 332911
New
DIBBS
PARTS KIT, BUTTERFLYThis contract specifies the procurement of a Parts Kit for a Butterfly Valve under solicitation SPE7MC-26-T-144B, with a total quantity of five kits (KT), each identified by NSN 4810-01-535-5367 and vendor part number 80252 from ONTIC ENGINEERING & MANUFACTURING, INC. Delivery is required within 367 days FOB origin, with no variance allowed in quantity, and inspection and acceptance occur at the destination. The kit must be packaged and preserved in accordance with MIL-STD-2073-1E, Appendix D, for kits, requiring that all loose hardware be sealed within individual containers using the highest applicable preservation method to prevent corrosion or damage, and must not be shipped in bulk. Each kit must include a detailed parts list with part names, numbers, and quantities. Packaging must comply with MIL-STD-129 for marking, include the special marking instruction “OPEN THIS SIDE,” and be palletized as per DLA’s requirements. The unit of issue is officially KT (Kit) effective October 1, 2014, and all packaging methods must ensure the kit arrives in serviceable condition without requiring downstream sorting. The contract is issued under the Department of Defense through Depot Oklahoma at Tinker AFB under a Total Small Business Set-Aside, with a North American Industry Classification System code of 332911. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced via R and I numbers, and the applicable revision is determined by the solicitation or award date. Preservation and packaging must meet the latest version of MIL-STD-2073-1D to protect the most critical component within the kit, and all components must be securely contained to avoid physical damage such as dents, scratches, or nicks. The contract was posted on July 21, 2026, with a response deadline of August 3, 2026, and primary point of contact is Marisa Thompson at the DLA office. Compliance with these specifications is mandatory to ensure readiness, logistics efficiency, and operational functionality upon receipt.
Industrial Valve Manufacturing

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 484121
New
DIBBS
Transportation and Delivery Coordination (FOB Origin)The contract requires coordination of the shipment of aircraft toilets to the DLA Distribution Depot in Oklahoma under FOB Origin terms, meaning the seller is responsible for arranging and loading the goods at the point of origin, with all subsequent transportation costs and risks transferred to the buyer upon loading. This effort falls under the Department of Defense’s Foreign Distribution and Transportation program, which governs the logistics and delivery of defense-related equipment, ensuring compliance with DoD-specific procurement and shipment standards. The place of performance is designated as Tinker Air Force Base with the ZIP code 73145-8000, indicating the final destination for the cargo after transit. The solicitation is classified as a subcontract and is associated with the NAICS code 484121, which covers truck transportation for agricultural products, suggesting specialized freight coordination may be needed for the movement of these items under defense logistics protocols. The posting date is listed as July 20, 2026, with a response deadline of July 31, 2026, giving potential vendors a short window to submit proposals. The contract is managed by the Department of Defense through depot Oklahoma, and all activities must align with DoD procedural requirements for defense cargo handling and delivery timelines.
General Freight Trucking, Long-Distance, Truckload

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 336412
New
DIBBS
Manufacture and Supply of Aircraft Toilets (NSN: 4510011671057)The contract obligates the vendor to fully manufacture, assemble, test, and deliver five aircraft lavatory units that meet stringent military specifications and Defense Logistics Agency standards, with the National Stock Number 4510011671057. The work must be performed in accordance with DLA requirements, including the proper handling, documentation, and disposition of any units that fail acceptance criteria. The place of performance is designated as Tinker Air Force Base with a zip code of 73145-8000, indicating the operational and logistical context for delivery and integration. The NAICS code 336412 identifies the industry as Aircraft Equipment Manufacturing, aligning the scope with specialized defense aviation component production. This is a subcontract opportunity posted by the Department of Defense through the Depot Oklahoma office, with a response deadline of July 31, 2026, and a posting date of July 20, 2026. The solicitation is accessible via the DIBBS platform, and while no set-aside type is specified, the contract requires strict adherence to defense standards and accountability for non-conforming units. All deliverables must be fully compliant, tested, and ready for integration into military aircraft systems upon delivery, with the vendor responsible for meeting all technical, quality, and logistical demands outlined by the contracting authority.
Aircraft Engine and Engine Parts Manufacturing

POSTED

2 days ago

DEADLINE

in 9 days
View Details