Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

NONMETALLIC SPECIAL SH

Active
SPE8E9-27-T-0371Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This solicitation, issued by DLA Troop Support Construction and Equipment MRO SVC I, is a small business set-aside for the procurement of 244 feet of nonmetallic special shaped sections under NSN 9390008776254. The items must be manufactured according to specific technical data, including basic drawing 97499 110-015 Revision E and reference drawings 97499 299-947-095 and 98752 200415485. The contract allows for a quantity variance of plus or minus 10 percent. Delivery is required within 111 days after order, with a need ship date of March 1, 2027, and a required delivery date of March 18, 2027. Shipping is FOB Origin, with the destination for both inspection and acceptance being DLA Distribution Warner Robins in Georgia. The procurement incorporates strict quality and security standards, including CMMC Level 2 self-assessment and the safeguarding of covered defense information. Packaging must adhere to DLA Master List requirements and RP001, with non-hazardous materials following ASTM D3951 and hazardous materials following TQ requirement IP025. All shipments must be marked and labeled per MIL-STD-129. Quality assurance will be conducted at the destination, utilizing sampling methods such as MIL-STD-1916 or MIL-STD-105/ASQ Z1.4, where acceptance typically requires zero non-conformances. All quotes must be submitted via the DLA Internet Bid Board System by November 9, 2026.

General Info

Small business set-aside for 244 feet of nonmetallic special shaped sections for DLA.

Agency

Department Of Defense → CONSTRUCTION & EQUIPMENT MRO SVC I

NAICS

327999 - All Other Miscellaneous Nonmetallic Mineral Product Manufacturing

Place of Performance

BLDG 376, ROBINS A F B, GA, 31098-1887, USA

Set-Aside

NONE

Documents

1

RFQ SPE8E9-27-T-0371

PDF, High priority: read this firstrfq
High

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → CONSTRUCTION & EQUIPMENT MRO SVC I
Contacts1 person available
OfficeUSA
Organization / AgencyDepartment Of Defense → CONSTRUCTION & EQUIPMENT MRO SVC I
Office AddressUSA
Contacts
Tracey Marcus
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
NONMETALLIC SPECIAL SHAPED SECTION
NONMETALLIC SPECIAL SHAPED SECTION
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment
RD002, COVERED DEFENSE INFORMATION APPLIES
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
.
CRITICAL APPLICATION ITEM
TDP Rev A Gen 4 IAW BASIC DRAWING NR 97499 110-015 REVISION NR E DTD 08/17/1971 PART PIECE NUMBER: 110-015-1
TDP Rev A Gen 4 IAW REFERENCE DRAWING NR 97499 299-947-095 REVISION NR F DTD 01/19/1995 PART PIECE NUMBER:
TDP Rev A Gen 4 IAW REFERENCE DRAWING NR 98752 200415485 REVISION NR E DTD 01/30/2020 PART PIECE NUMBER:
SPE8E9-27-T-0371
SECTION B
PR: 7018161312 PRLI: 0001 CONT’D
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7018161312 0001 FT 244.000
NSN/MATERIAL:9390008776254
DELIVERY (IN DAYS):0111
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 10% MINUS 10%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,
PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
SW3119
DLA DISTRIBUTION WARNER ROBINS
455 BYRON STREET
BLDG 376
ROBINS A F B GA 31098-1887
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3119
DLA DISTRIBUTION WARNER ROBINS
455 BYRON STREET BLDG 376
ROBINS A F B GA 31098-1887
US
SPE8E9-27-T-0371
SECTION B
PR: 7018161312 PRLI: 0001 CONT’D
Need Ship Date:03/01/2027 Original Required Delivery Date:03/18/2027
SPE8E9-27-T-0371 NSN/Part Number: 9390-00-877-6254 Quantity: 244 FT Purchase Request: 7018161312QTY: 244 Delivery: 111 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 327999
New
DIBBS
Supply of Paint Roller Frames (NSN 8020017067468)This subcontract involves the procurement or manufacture of 142 paint roller frames identified by NSN 8020017067468 to support prime contractors delivering DLA Troop Support supply contracts. The work is managed by the Department of Defense through the DDSP New Cumberland Facility, with performance taking place in New Cumberland, Pennsylvania. The selected provider must possess a valid CAGE Code and UEI registration. All deliverables must strictly adhere to military standards, specifically requiring shipment marking and storage per MIL-STD-129 and palletization according to RP001 DLA Packaging Requirements. The response deadline for this opportunity is November 9, 2026.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 9 hours ago

DEADLINE

in 12 days
View Details
NAICS: 327999
New
DIBBS
NONMETALLIC SPECIAL SH
Solicitation # SPE8E5-27-T-0310
Solicitation SPE8E5-27-T-0310 is a small business set-aside request for quotations issued by the Department of Defense, specifically DLA Troop Support, for the procurement of 67 feet of nonmetallic special shaped section, identified by NSN 9390-00-547-2123. A critical technical requirement specifies that the material must be provided in minimum lengths of 10 feet. The delivery lead time is 167 days after receipt of order, with a required delivery date of August 9, 2027, and a need ship date of April 26, 2027. The place of performance and delivery is Tinker AFB, Oklahoma, with inspection and acceptance occurring at the destination. The contract carries stringent security and regulatory requirements, including CMMC Level 2 certification via a C3PAO and compliance with ITAR and EAR export controls. Technical data is restricted to approved contractors with US/Canada Joint Certification Program certification. Packaging must adhere to MIL-STD-129 and RP001, with specific standards for hazardous materials under FED-STD-313 and TQ requirement IP025. Financial administration is handled through the Wide Area Workflow system, and the procurement is subject to the Buy American Act and the Berry Amendment. Offerors are encouraged to submit quantity ranges via the DIBBS portal.
DEPOT OKLAHOMA

POSTED

about 9 hours ago

DEADLINE

in 12 days
View Details
NAICS: 327999
New
DIBBS
POINTER, DIAL
Solicitation # SPE7L3-27-T-1561
Solicitation SPE7L3-27-T-1561 is a request for quotations issued by the Defense Logistics Agency (DLA) Weapons Support for the procurement of one unit of a dial pointer, identified by National Stock Number 5355-01-486-6089. The requirement is managed under the First Destination Transportation program with delivery terms set as FOB Origin. The required delivery date is October 26, 2026, with a specified delivery lead time of five days after order. Performance and delivery are designated for Fort Hood, Texas, and the contractor must utilize the fastest traceable means of shipment, explicitly prohibiting the use of parcel post. The contract mandates strict quality and compliance standards, requiring the manufacturer's inspection system to meet ISO 9001:2015 or an equivalent standard. Inspection and acceptance will occur at the origin. Technical data associated with this item is subject to ITAR or EAR export controls, requiring contractors to have approved US/Canada Joint Certification Program certification and completed specific DLA training. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129 for marking, while hazardous materials must be labeled per the Hazard Communication Standard. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and payment. The solicitation incorporates various federal regulations, including the Buy American Act, the Berry Amendment, and CMMC Level 2 Self-Assessment for cybersecurity. A price evaluation preference is available for certified HUBZone small business concerns. All quotes must be submitted via the DIBBS portal.
DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 9 hours ago

DEADLINE

in 12 days
View Details
NAICS: 327999
New
DIBBS
NONMETALLIC CHANNEL
Solicitation # SPE8E5-27-T-0365
Solicitation SPE8E5-27-T-0365 is a fixed-price procurement for 5,608 units of nonmetallic channel, identified by NSN 9390-00-137-6758. The contract is managed by the Department of Defense through DLA Troop Support Construction and Equipment and is designated as a total small business set-aside under NAICS code 327999. Delivery is required within 65 days after order, with a need ship date of October 28, 2026, and an original required delivery date of March 23, 2027. The items are to be delivered FOB Origin to DLA Distribution San Diego, California, with both inspection and acceptance occurring at the destination. The contractor must adhere to strict technical and quality standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Specific prohibitions are in place regarding the use of mercury and the minimization of plastics in packaging materials. Cybersecurity compliance is mandatory, requiring a CMMC Level 2 Self-Assessment and adherence to DFARS 252.204-7012 for safeguarding covered defense information. Payment and invoicing must be processed electronically via the Wide Area WorkFlow system. Additionally, the contract incorporates various FAR and DFARS clauses concerning the Buy American Act, the Berry Amendment, and prohibitions on covered defense telecommunications equipment.
SAN DIEGO

POSTED

about 9 hours ago

DEADLINE

in 12 days
View Details
NAICS: 327999
New
DIBBS
SHEETING, REFLECTIVE
Solicitation # SPE8E5-27-T-0347
This procurement, issued by the Defense Logistics Agency Troop Support Construction and Equipment, is for the supply of one roll of yellow reflective sheeting. The material must be 8 inches wide, 7-8 mil thick, and meet Type 1, Class 1 specifications. Each roll is defined as 50 yards in length. The item is subject to a shelf life requirement of 18 months and must be delivered within 20 days after the order. Delivery is FOB Destination, with shipping addresses located in both the United States and Japan. The contractor is required to provide a Certificate of Quality Compliance and adhere to strict packaging and marking standards, including MIL-STD-2073-1E and MIL-STD-129. Special marking code 33 for shelf life applies, and the use of plastics for wrapping or cushioning should be avoided. Invoicing and receiving reports must be processed electronically through the Wide Area WorkFlow system. The procurement incorporates various FAR and DFARS clauses, including requirements for safeguarding covered defense information, hazardous material labeling per the Hazard Communication Standard, and compliance with the Buy American Act and Berry Amendment. Inspection and acceptance will take place at the destination.
Defense Logistics Agency

POSTED

about 9 hours ago

DEADLINE

in 12 days
View Details
NAICS: 327999
New
DIBBS
NONMETALLIC ROD
Solicitation # SPE8E5-27-T-0318
Solicitation SPE8E5-27-T-0318 is a request for quotations for the procurement of 27 lengths of nonmetallic rod, specifically identified by NSN 9390012231437. Each rod must have a length of 96.0 inches and a diameter of 2.0 inches. The requirement is issued by DLA Troop Support Construction and Equipment and is designated as a HUBZone set-aside. The need ship date is April 26, 2027, with an original required delivery date of May 31, 2027, and a delivery lead time of 167 days after order. Delivery is FOB Origin, with inspection and acceptance occurring at the destination, specifically the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The contract mandates strict adherence to DLA packaging requirements (RP001) and MIL-STD-129 for marking, while emphasizing the avoidance of plastics for wrapping and dunnage. Technical and quality requirements are governed by the DLA Master List, and the contractor must ensure that mercury is not intentionally added to the supplies. Payment and invoicing must be processed through the Wide Area Workflow system. Compliance with the Buy American Act, the Berry Amendment, and various DFARS cybersecurity and hazardous material regulations is required. The solicitation is managed by Nafis Beyah and requires quotes to be submitted via the DIBBS portal.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 9 hours ago

DEADLINE

in 12 days
View Details
NAICS: 327999
New
DIBBS
KNOB
Solicitation # SPE7L1-27-T-2811
Solicitation SPE7L1-27-T-2811 is a request for quotations issued by the DLA Weapons Support Land Supply Chain for the procurement of one knob, identified by NSN 5355-01-264-6274 and part piece number 13226E0101. The requirement is based on Technical Data Package Rev B Gen 3 and Basic Drawing NR 97403 13226E0101 Revision A. This is a small business set-aside procurement with a required delivery date of October 26, 2026, and a delivery timeframe of five days after receipt of order. Shipping is designated as FOB Origin, with the final destination located in Varnville, South Carolina. The contract mandates strict adherence to quality and packaging standards, specifically ASTM D3951 and MIL-STD-129 for marking and labeling, with DLA Master List requirements and RP001 taking precedence. Inspection and acceptance will occur at the destination. Key regulatory compliance includes the Buy American and Balance of Payments Program, NIST SP 800-171 assessment requirements, and safeguarding of covered defense information. Invoicing and receiving reports must be processed electronically through the Wide Area WorkFlow system.
DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 9 hours ago

DEADLINE

in 12 days
View Details
NAICS: 327999
New
DIBBS
NONMETALLIC SPECIAL SH
Solicitation # SPE8E5-27-T-0311
Solicitation SPE8E5-27-T-0311 is a small business set-aside for the procurement of 939 feet of nonmetallic special shaped rubber sections, identified by NSN 9390005926864. The requirement specifies a quantity variance of plus or minus 10 percent and a delivery period of 85 days after order, with a need ship date of November 2, 2026, and an original required delivery date of April 28, 2027. The items are to be delivered FOB Origin to the DLA Distribution Depot Oklahoma at Tinker AFB. Technical compliance requires adherence to ASTM D2000, which supersedes drawing BMS1-24, and specific compliance with paragraphs 1, 3, and 12 of engineering data list drawing 200415485. The contract mandates strict quality and security standards, including a CMMC Level 2 self-assessment and safeguarding of covered defense information. Packaging and marking must comply with MIL-STD-129 and DLA requirement RP001, with special marking code 33 applied for a 36-month extendable shelf life. Hazardous materials must be labeled according to the Hazard Communication Standard. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and compliance with the Buy American Act and Berry Amendment. The procurement is managed by DLA Troop Support, Construction and Equipment, with the primary point of contact being Nafis Beyah.
DEPOT OKLAHOMA

POSTED

about 9 hours ago

DEADLINE

in 12 days
View Details
NAICS: 327999
New
DIBBS
SHEET, NONMETALLIC, PROT
Solicitation # SPE8E5-27-T-0363
Solicitation SPE8E5-27-T-0363 is a Request for Quotations issued by the Defense Logistics Agency Troop Support Construction and Equipment for the procurement of nonmetallic protective sheets, described as protective seals and special shaped sections under NSN 9390-01-595-7239. The requirement consists of multiple line items, including CLINs 0001, 0002, and 0003, each for a quantity of one unit. Delivery is required within five days after receipt of order, with original required delivery dates ranging from April 15, 2026, to October 23, 2026. Shipping is designated as FOB Origin for specific items, with inspection and acceptance occurring at the destination. The contract mandates strict adherence to MIL-STD-129 for marking and MIL-STD-2073-1E for packaging, with palletization following DLA requirement RP001. A critical requirement for MRAP palletized shipments is the application of two 10x10 inch fluorescent yellow stickers with bold black MRAP lettering, though specific OEM background colors may be used. The items are subject to a non-extendable 18-month shelf life (Type I, Code K). Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with the Buy American Act, Berry Amendment, and DFARS cybersecurity reporting standards.
Defense Logistics Agency

POSTED

about 9 hours ago

DEADLINE

in 12 days
View Details
NAICS: 327999
New
DIBBS
TAPE, PROTECTIVE, PLASTI
Solicitation # SPE8E5-27-T-0361
Solicitation SPE8E5-27-T-0361 is a procurement issued by the Defense Logistics Agency for one roll of protective plastic tape, identified by NSN 9390-01-382-8297 and Boeing Distribution Services Inc part number 191344ITL. The required tape must be 12 inches wide with .010 inch holes spaced .025 inches apart, with each roll consisting of 36 yards. The delivery is required within 20 days after order, with the shipping terms set as FOB Destination. Inspection and acceptance will also occur at the destination. The contract mandates strict adherence to the DLA Master List of Technical and Quality Requirements, which takes precedence over ASTM D3951 for non-hazardous commercial packaging. All shipments must be marked and labeled according to MIL-STD-129, and hazardous materials must comply with TQ requirement IP025 and FED-STD-313. Administrative requirements include electronic invoicing through Wide Area WorkFlow and compliance with various FAR and DFARS clauses, including the Buy American Act, safeguarding of covered defense information, and NIST SP 800-171 assessment requirements.
Defense Logistics Agency

POSTED

about 9 hours ago

DEADLINE

in 12 days
View Details
NAICS: 327999
New
DIBBS
Nonmetallic Hose Assembly FabricationThis subcontract involves the manufacture and supply of nonmetallic hose assemblies for prime contractors supporting the Department of Defense, specifically the DLA Weapons Support Maritime supply chain. The scope of work requires the fabrication of 1/4 inch tube size assemblies with a nominal overall length of 9.75 inches, adhering strictly to NSN 4720008340512 and RA001 technical specifications. Performance for this contract will take place in San Diego, California. Compliance is mandatory regarding the Buy American Act, the Berry Amendment, and DFARS 252.204-7012 and 7009 cybersecurity standards. Interested parties must submit responses by November 9, 2026, for this requirement categorized under NAICS code 327999.
DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 327999
New
DIBBS
Nonmetallic Hose Assembly SupplierThis subcontract opportunity is for a supplier to provide nonmetallic hose assemblies to prime contractors supporting the Department of Defense DLA Weapons Support Fluid Handling Division. The contractor is responsible for manufacturing or sourcing NSN 4720-01-428-6944 assemblies, ensuring that all products are free from mercury or mercury-containing compounds. Strict adherence to MIL-STD-129 marking, MIL-STD-2073-1E packaging, and DLA RP001 requirements is mandatory for this project. The scope of work requires the delivery of three completed, marked, and packaged hose assemblies to DLA Distribution DDSP in New Cumberland, Pennsylvania. This is a total small business set-aside under NAICS code 327999. Interested parties must submit their responses by November 11, 2026.
DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

1 day ago

DEADLINE

in 14 days
View Details

More opportunities from Department Of Defense → CONSTRUCTION & EQUIPMENT MRO SVC I

Same awarding agency

NAICS: 339999
New
DIBBS
Supply of Life Preserver VestsThis subcontract involves the supply of 128 life preserver vests, specifically NSN 4220015397252, to support prime contractors on Defense Logistics Agency supply contracts. The project is managed under the Department of Defense through Construction and Equipment MRO SVC I, with performance taking place in New Cumberland. The successful provider must deliver the units along with a Certificate of Quality Compliance. Strict adherence to federal standards is required, including packaging per MIL-STD-2073-1E and RP001, and marking per MIL-STD-129. Additionally, the contractor must maintain compliance with the Buy American Act and meet NIST SP 800-171 cybersecurity standards. The response deadline for this opportunity is November 9, 2026.
All Other Miscellaneous Manufacturing

POSTED

about 9 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333414
New
DIBBS
Supply of Vaneaxial Fans (PN: USTF1203824HW)This subcontract involves the supply of 62 vaneaxial fans, part number USTF1203824HW, to support Department of Defense equipment maintenance projects managed by DLA Troop Support. The contractor is responsible for manufacturing or sourcing the units in strict accordance with DLA Master List technical and quality requirements. All items must be packaged and palletized following ASTM D3951, MIL-STD-129, and DLA RP001 standards, with delivery terms set as FOB Origin. The agreement requires full compliance with Buy American regulations and DFARS standards regarding the safeguarding of covered defense information. Performance is associated with the Construction and Equipment MRO SVC I agency, with the place of performance located at Robins Air Force Base. The contract falls under NAICS code 333414.
Heating Equipment (except Warm Air Furnaces) Manufacturing

POSTED

about 9 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333415
New
DIBBS
Supplier of Air Conditioning Filter Elements (NSN 4130016648575)This subcontract involves the supply of 19 specialized air conditioning filter elements for prime contractors working on DLA Troop Support projects. The supplier is responsible for manufacturing or sourcing filters that match NSN 4130016648575 and Aero Specialties Inc part number 1040720-P2. All materials must strictly adhere to the Buy American Act and the Berry Amendment to ensure regulatory compliance. The contractor must perform packaging according to ASTM D3951 and handle marking and labeling in accordance with MIL-STD-129. Delivery is required FOB Origin to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. This requirement falls under NAICS code 333415 and is managed through the Department of Defense.
Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

about 9 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332999
New
DIBBS
Supply of Chain Bag Assembly (NSN 1730-01-596-0192)This subcontract involves the procurement and delivery of 10 units of Chain Bag Assembly, part number 7548685-400, under NSN 1730-01-596-0192. The project supports prime contractors fulfilling DLA Troop Support supply contracts for the Department of Defense, specifically through Construction and Equipment MRO SVC I. All deliverables must strictly adhere to Critical Application Item quality standards as well as DLA packaging and labeling specifications. The performance of this contract will take place in New Cumberland, Pennsylvania. Interested parties must note the response deadline of November 9, 2026, for this requirement categorized under NAICS code 332999. The final objective is the successful delivery of the 10 assemblies to the designated DLA location.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 9 hours ago

DEADLINE

in 12 days
View Details
NAICS: 325211
New
DIBBS
SOLAS-Grade Reflective Tape and Marine Plastic SupplierThis subcontract opportunity, managed by Construction & Equipment MRO SVC I for the Department of Defense, seeks a supplier for raw materials used in DLA lifesaving equipment. The scope of work involves providing SOLAS-approved high-visibility reflective tape and UV-stabilized, hard-shell unicellular plastic resins or pre-formed shells in International Orange. All supplied materials must be certified for use in SOLAS-compliant apparatus and strictly adhere to mercury-free requirements for delivery to the manufacturer. The contract is designated as a Total Small Business Set-Aside under NAICS code 325211, with the place of performance located in New Cumberland, Pennsylvania. Interested parties must submit their responses by November 9, 2026.
Plastics Material and Resin Manufacturing

POSTED

about 9 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333310
New
DIBBS
SOLAS-Certified Lifesaving Ring Buoy SupplierThis subcontract opportunity is for the manufacture and supply of 308 finished 30-inch diameter unicellular plastic hard-shell lifesaving ring buoys to support prime contractors on DLA supply contracts. The products must be manufactured to part number CG-160.050-30IN, featuring International Orange coloring and reflective tape. Strict adherence to SOLAS certification, CFR 46 Part 160-050-3, and the Buy American Act is required, with packaging and marking following MIL-STD-2073-1E and MIL-STD-129 standards. The contract is issued by Construction & Equipment MRO SVC I under the Department of Defense and is designated as a Total Small Business Set-Aside. Interested parties must respond by November 9, 2026. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 333310.
Commercial and Service Industry Machinery Manufacturing

POSTED

about 9 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333318
New
DIBBS
Supply of Air Breathing Pump Filter Cartridges (NSN 4240-01-084-0921)This subcontract, issued by Construction & Equipment MRO SVC I for the Department of Defense, requires the manufacture or sourcing of air breathing pump filter cartridges meeting NSN 4240-01-084-0921 specifications. The selected provider must ensure all items comply with DLA Master Solicitation and DLAD quality standards, packaging the products into boxes for final delivery. A total of 102 boxes of filter cartridges are required for delivery to Cherry Point, and the provider must possess a valid CAGE code to be eligible. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 333318. Interested parties must submit their responses by November 9, 2026, following the posting date of October 28, 2026. This contract serves prime contractors who are fulfilling broader DLA supply obligations.
Other Commercial and Service Industry Machinery Manufacturing

POSTED

about 9 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333412
New
DIBBS
Centrifugal Fan SupplierThis subcontract involves the manufacture or sourcing of 18 centrifugal fans matching NSN 4140013887768 for prime contractors supporting DLA Troop Support supply contracts. The supplier must ensure all units meet strict government technical and quality requirements and coordinate delivery within 167 days after the order is placed. Managed by Construction & Equipment MRO SVC I for the Department of Defense, the contract requires the supplier to prepare all necessary shipping documentation for Government-Arranged Transportation under the First Destination Transportation program. Performance for this requirement is centered in Tracy, California, under NAICS code 333412.
Industrial and Commercial Fan and Blower Manufacturing

POSTED

about 9 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336413
New
DIBBS
Aerospace-Grade Alloy SupplierThis subcontract involves the supply of certified aerospace-grade raw materials to prime contractors supporting Department of Defense Construction and Equipment MRO SVC I contracts. The supplier is responsible for providing alloys that strictly adhere to technical specifications for NSN 4930-01-552-0232. To ensure full regulatory compliance, the provider must furnish Mill Test Reports verifying that all materials meet the requirements of the Buy American Act and the Berry Amendment. The performance of this contract will take place in Tracy, California, under NAICS code 336413. Interested parties should note that the solicitation was posted on October 28, 2026, with a response deadline set for November 9, 2026.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 9 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332710
New
DIBBS
Fuel Injector Holder ManufacturerThis subcontract involves the manufacture of four precision-machined fuel injector holders for prime contractors supporting the Department of Defense under the Construction and Equipment MRO SVC I agency. All parts must be fabricated according to NSN 4930-01-552-0232 specifications using precision CNC machining, with a strict prohibition on the use of additive manufacturing. The contractor is required to maintain mercury-free processes and ensure full compliance with DFARS 252.204-7012 and MIL-STD-2073-1E standards. Performance of the contract will take place in Tracy, California, under NAICS code 332710.
Machine Shops

POSTED

about 9 hours ago

DEADLINE

in 12 days
View Details
NAICS: 423830
New
DIBBS
Supply of Air Hose Regulator Adapters (NSN 4220015333648)This subcontract involves the supply of 101 air hose regulator adapters, identified by NSN 4220015333648, to support prime contractors delivering DLA Troop Support supply contracts. The project is managed under the Department of Defense by Construction & Equipment MRO SVC I, with the place of performance located in Tracy, California. The selected provider must adhere to RP001 DLA Packaging Requirements for Procurement and maintain compliance with NIST SP 800-171 DoD Assessment Requirements. The opportunity was posted on October 28, 2026, with a response deadline of November 9, 2026, falling under NAICS code 423830.
Industrial Machinery and Equipment Merchant Wholesalers

POSTED

about 9 hours ago

DEADLINE

in 12 days
View Details
NAICS: 493110
New
DIBBS
Military Packaging and Marking ServicesThis subcontract for Military Packaging and Marking Services involves providing specialized packaging and marking support for prime contractors on DLA supply contracts. The scope of work requires packaging kits in strict accordance with MIL-STD-2073-1E and marking all shipments per MIL-STD-129, utilizing specific packaging data such as QUP:001 and Pres Mthd:10. The final deliverables consist of shipment-ready carts labeled for delivery to DLA Distribution centers in San Diego and New Cumberland. Managed under the Department of Defense through Construction & Equipment MRO SVC I, the project is categorized under NAICS code 493110. Performance will take place in San Diego, California. The solicitation was posted on October 28, 2026, with a response deadline set for November 9, 2026.
General Warehousing and Storage

POSTED

about 9 hours ago

DEADLINE

in 12 days
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS