Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Nonmetallic Special Shaped Seal Supplier

Active

Federal

Response Deadline11/09/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the manufacture and supply of specialized nonmetallic seals, specifically identified by NSN 5330016966082, for prime contractors supporting the Department of Defense. The supplier is responsible for providing physical seals formed into special shaped sections that strictly adhere to the DLA Master List of Technical and Quality Requirements. All deliverables must comply with FAR 52.204-24 and DFARS 252.204-7016 regulations. The opportunity is managed by the DLA Weapons Support Land Supplier Operations Vehicle Support agency under NAICS code 326220. The performance location is designated as FPO 96694. Interested parties must submit their responses by the deadline of November 9, 2026, following the posting date of October 27, 2026.

General Info

Manufacture and supply specialized nonmetallic seals for DoD by November 9, 2026.

Agency

Department Of Defense → DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

NAICS

326220 - Rubber and Plastics Hoses and Belting Manufacturing

Place of Performance

FPO, AP, 96694, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE7L3-27-T-1485.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

SEAL, NONMETALLIC SPECI

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 27

subcontract

Response DeadlineNov 9

Submission deadline

Response Deadline

11/09/2026, 05:00:00 PM UTCin 12 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies specialized nonmetallic seals for prime contractors delivering DLA supply contracts. Manufactures or sources the item identified by NSN 5330016966082, ensuring compliance with the DLA Master List of Technical and Quality Requirements. Utilizes nonmetallic materials formed into a special shaped section. Complies with FAR 52.204-24 and DFARS 252.204-7016. Delivers the physical nonmetallic special shaped seal.

Similar Contracts

Same NAICS industry code

Nonmetallic Hose Assembly Fabrication (NSN 4720015891315)This subcontract involves the manufacture and supply of nonmetallic hose assemblies for prime contractors supporting the Department of Defense DLA Weapons Support Maritime Supply Chain. The contractor is responsible for fabricating assemblies according to NSN 4720015891315 specifications, ensuring all products are completed, packaged, and delivered. Performance will take place in Ft Riley. Strict adherence to military standards is required, specifically MIL-STD-129 and MIL-STD-130N for marking, and MIL-STD-1916 and ASQ H1331 for quality assurance. Additionally, the provider must comply with the Buy American Act and guarantee that no Class I ozone-depleting chemicals are used during production. The response deadline for this opportunity is November 9, 2026.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 23 hours ago

DEADLINE

Manufacture of Nonmetallic Special Shaped Section SealsThis subcontract involves the manufacture of nonmetallic seals with a special shaped section for the Department of Defense, specifically supporting DLA Weapons Support Land Supplier Opns Vehicle Spt projects. The contractor is required to extrude or mold nonmetallic material into continuous 100ft lengths in accordance with NSN 5330-01-248-1401, with a total delivery requirement of 196 rolls. Strict compliance with quality and safety standards is mandatory, including adherence to RA001 quality standards and a guarantee of zero asbestos content per FED-STD-313. The work is categorized under NAICS code 326220 and is designated for performance in Texarkana, Texas.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 23 hours ago

DEADLINE

Supply of Nonmetallic Hose (NSN 4720016875600)This subcontract involves the manufacture and supply of nonmetallic hose under NSN 4720016875600 for prime contractors supporting the Department of Defense DLA Weapons Support Maritime Supply Chain. All products must be produced in accordance with the DLA Master List of Technical and Quality Requirements RA001 and must strictly adhere to the Buy American Act and the Berry Amendment. Additionally, the contractor must ensure that all materials are free of Class I ozone-depleting chemicals. The scope of work includes the delivery of completed hoses with packaging and marking performed according to MIL-STD-2073-1E, MIL-STD-129, and MIL-STD-130N standards. Performance for this contract is centered in Lewis McChord, Washington, under NAICS code 326220. The response deadline for this opportunity is November 9, 2026.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 23 hours ago

DEADLINE

Supplier of Non-Metallic Hose Assemblies (NSN 4720-01-727-780)This subcontract through the Department of Defense ASC Supplier Oper OEM Division requires the provision of three units of non-metallic hose assemblies meeting NSN 4720-01-727-780 specifications. The selected supplier must either manufacture or source these assemblies for prime contractors on DLA supply contracts, ensuring all items are packaged and palletized in strict accordance with MIL-STD-2073-1E and RP001 standards. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 326220. To be eligible for the award, the supplier must maintain an active SAM registration. The response deadline for this requirement is October 30, 2026.

ASC SUPPLIER OPER OEM DIVISION

POSTED

about 23 hours ago

DEADLINE

Manufacturing of Preformed Packing (NSN 5330010427436)This subcontract involves the manufacture and supply of 22 units of preformed packing components for prime contractors supporting the DLA Weapons Support Strategic Acquisition Program Directorate. The contractor is responsible for fabricating these components to meet the specific dimensions and material properties of NSN 5330010427436 using precision molding or forming equipment. Compliance is mandatory regarding the Buy American Act and the DLA Master List of Technical and Quality Requirements RA001, and the provider must supply a certification of conformance. This opportunity is designated as a Total Small Business Set-Aside under NAICS code 326220, with a response deadline of November 12, 2026.

DLA WEAPONS SUPPORT STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 23 hours ago

DEADLINE

Manufacturer of Preformed Packing (NSN 5330-01-088-7281)This subcontract involves the manufacture and supply of eight units of preformed packing, identified as NSN 5330-01-088-7281, for prime contractors supporting DLA Weapons Support Land Supplier Opns Vehicle Spt projects. Production must strictly adhere to the DLA Master List of Technical and Quality Requirements RA001. All materials are required to be certified asbestos-free and must maintain full compliance with the Buy American Act and the Berry Amendment. The contractor is required to meet NIST SP 800-171 cybersecurity standards to ensure data protection. Performance of the contract will take place in New Cumberland, Pennsylvania. Interested parties must submit their responses by the deadline of November 9, 2026.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 23 hours ago

DEADLINE

Manufacture and Supply of Nonmetallic Round SealsThis subcontract involves the manufacture and supply of 100 preformed nonmetallic round seals for prime contractors supporting DLA Weapons Support Land projects. The items must be produced according to Basic Drawing 19200 8626228 and Reference Drawing 19200 12579607, utilizing materials that are both asbestos-free and ozone-compliant. Each unit is required to have a shelf life of 153 months and must be accompanied by a Certificate of Conformance. Strict adherence to security and packaging standards is mandatory, including CMMC Level 2 and NIST SP 800-171 compliance. Deliverables must be packed in waterproof bags following MIL-DTL-117 specifications and marked in accordance with MIL-STD-130N. The project is managed under the Department of Defense and is associated with NAICS code 326220, with performance taking place in New Cumberland.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 23 hours ago

DEADLINE

Manufacturer of Plain Seals (NSN 5330-01-687-6056)This subcontract involves the manufacture of 10 finished plain seals for prime contractors supporting DLA Weapons Support Land projects. The fabrication must strictly adhere to NSN 5330-01-687-6056 and the quality requirements specified in the DLA Master List RA001. Environmental restrictions are in place to ensure that no mercury or Class I ozone-depleting chemicals are added during the production process. The project is managed under the Department of Defense and requires strict adherence to ITAR/EAR export control regulations and DFARS 252.204-7012 safeguarding standards. Performance will take place in New Cumberland, Pennsylvania. Interested parties must respond by November 9, 2026, regarding this requirement categorized under NAICS code 326220.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 23 hours ago

DEADLINE

Supplier of Nonmetallic Medium Pressure Hydraulic HoseThis subcontract involves the supply of rubber-covered, one-wire braid, medium-pressure nonmetallic hydraulic hoses for prime contractors working on Department of Defense Fluid Handling Division projects. The specific requirement is for one Nonmetallic Hydraulic Hose under NSN 4720-01-701-0915, featuring a 2.38 inch inner diameter, a minimum bending radius of 24 inches, and an operating pressure of 350 psi. To ensure quality and safety, the manufacturer must perform burst test certification up to 1400 psi and maintain strict compliance with MIL-STD-2073-1E and MIL-STD-129 standards. The contract falls under NAICS code 326220, with the place of performance located at FPO 96678.

FLUID HANDLING DIVISION

POSTED

about 23 hours ago

DEADLINE

Polytetrafluoroethylene (PTFE) High-Temperature Hose Assembly SupplierThis subcontract involves the supply of high-temperature, medium-pressure nonmetallic hose assemblies for prime contractors working with the Department of Defense DLA Weapons Support Fluid Handling Division. The scope of work requires the manufacture of four completed Polytetrafluoroethylene (PTFE) hose assemblies, identified by NSN 4720-01-673-7644, featuring permanently attached flareless-to-flareless fittings. To ensure quality and standardization, the supplier must maintain a QPL/QML listing and adhere strictly to the Detail Specification for PTFE High Temperature Medium Pressure hoses. Additionally, all deliverables must comply with MIL-STD-2073-1E and MIL-STD-129 standards. The opportunity is categorized under NAICS code 326220, with a response deadline set for November 9, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 23 hours ago

DEADLINE

Manufacturer of Plain Seals (NSN 5330-01-708-6467)This subcontract involves the manufacture of 376 plain seals according to NSN 5330-01-708-6467 specifications for the Department of Defense, specifically supporting DLA Weapons Support Land Supplier Operations. The contractor is required to use 100% asbestos-free materials and must provide five first article samples for government testing prior to the delivery of the full order. Performance will take place at Tinker AFB. To ensure quality and security, the provider must maintain an ISO 9001:2015 inspection system and demonstrate full compliance with DFARS 252.204-7012 and NIST SP 800-171 standards. The final deliverables consist of 376 finished seals and the 5 required samples.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 23 hours ago

DEADLINE

QPL Approved Gasket Manufacturer (NSN 5330013865379)This subcontract involves the manufacture and supply of 412 gaskets, identified by NSN 5330013865379, for prime contractors supporting the DLA Weapons Support Active Devices Division. The project requires the manufacturer to operate from a QPL-approved facility and adhere strictly to the Qualified Products List and Critical Application Item quality standards. Additionally, the contractor must comply with the DLA Master List of Technical and Quality Requirements RA001, ensure that no mercury is intentionally added to the products, and guarantee a non-extendable shelf life of 60 months. The contract falls under NAICS code 326220 and is managed by the Department of Defense. Performance of the work is located in New Cumberland, Pennsylvania. Interested parties must have submitted their responses by the deadline of November 9, 2026.

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

about 23 hours ago

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

Same awarding agency

Manual Control Lever Supply (NSN 5340-01-444-7230)This subcontract involves the manufacture and supply of 22 certified Manual Control Levers under NSN 5340-01-444-7230 for prime contractors supporting DLA Weapons Support. The provider must produce or source these parts according to source-controlled drawings, with the option to utilize additive manufacturing. All deliverables must include Certificates of Conformance and adhere to strict marking and packaging standards per MIL-STD-129 and MIL-STD-2073-1E. To qualify, the contractor must maintain SAE AS9003 or ISO 9001 certification and ensure full compliance with ITAR, EAR, and CMMC Level 2 security requirements. This effort falls under NAICS code 332999 and is managed by the Department of Defense for the DLA Weapons Support Land Supplier Operations Vehicle Support agency.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 23 hours ago

DEADLINE

ASTM D3951 Compliant Packaging and ShippingThis subcontract involves providing specialized packaging and logistics services for prime contractors supporting DLA Weapons Support contracts. The primary scope of work requires packaging components in strict accordance with the ASTM D3951 Standard Specification for Commercial Packaging to ensure items are securely prepared for transit. Additionally, the provider is responsible for coordinating shipments to designated DLA consignees and supplying all necessary shipping documentation. The project is managed under the Department of Defense for the DLA Weapons Support Land Supplier Operations Vehicle Support agency, with performance taking place in Tracy, California. Interested parties should note the response deadline of November 9, 2026, and the classification of the work under NAICS code 488510.

Freight Transportation Arrangement

POSTED

about 23 hours ago

DEADLINE

Manufacturing of Vehicular Component Covers (NSN 2590016295579)This subcontract involves the manufacture and supply of three vehicular component covers under NSN 2590016295579 for the Department of Defense, specifically supporting DLA Weapons Support Land Supplier Operations. The contractor is required to fabricate the parts in strict accordance with Reference Drawing NR 19207 13013633, dated December 21, 2009, with a specific prohibition against the use of additive manufacturing. The project falls under NAICS code 336390 and requires all packaging to comply with ASTM D3951 standards. Performance for this contract is located in Tracy, California, with a response deadline set for November 9, 2026.

Other Motor Vehicle Parts Manufacturing

POSTED

about 23 hours ago

DEADLINE

Ballistic-Grade Material SupplyThis subcontract involves the supply of certified ballistic-grade metals to prime contractors supporting DLA Weapons Support Land projects. The scope of work requires the provision of raw materials that strictly adhere to MIL-A-12560J and MIL-A-11356 standards. To ensure compliance and quality, the supplier must deliver certified raw metal stock accompanied by a comprehensive Contractor Quality Control material certification package, which includes chemical composition reports, mechanical properties test results, and ballistic testing data. The project is managed under the Department of Defense through the DLA Weapons Support Land Supplier Operations Vehicle Support agency, with performance taking place in New Cumberland. Interested parties should note the response deadline of November 9, 2026. The contract is categorized under NAICS code 331110, focusing on the specialized procurement of high-grade materials essential for defense weaponry applications.

Iron and Steel Mills and Ferroalloy Manufacturing

POSTED

about 23 hours ago

DEADLINE

Metal Casting and Tooling for Vehicle HatchThis subcontract involves the design and manufacture of custom tooling and cast metal components for vehicle hatch doors to support DLA Weapons Support Land projects. The selected provider will be responsible for producing these components in strict accordance with the provided technical data package and delivering both the final hatch castings and the associated production tooling. The project is managed under the Department of Defense and requires the contractor to maintain ISO 9001 or SAE AS9003 certification, as well as a CMMC Level 2 self-assessment. Performance will take place in New Cumberland, Pennsylvania, with a response deadline set for November 9, 2026.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 23 hours ago

DEADLINE

Ballistic and Critical Welding for M88E1 Hatch DoorThis subcontract involves performing critical and ballistic welding for the M88E1 hatch door assembly to support DLA Weapons Support Land projects. The selected contractor is responsible for executing welding in strict accordance with TACOM weldment drawings 12479550, 12322679, and 11671826, and must develop and submit Welding Procedure Specifications for approval prior to production. The final deliverable is a completed hatch door assembly that meets all required ballistic specifications. The project falls under NAICS code 332312 and is managed by the Department of Defense. A key compliance requirement for this engagement is a CMMC Level 2 self-assessment. Performance of the work is located in New Cumberland, Pennsylvania, with a response deadline set for November 9, 2026.

Fabricated Structural Metal Manufacturing

POSTED

about 23 hours ago

DEADLINE

Gasket Supplier (NSN 5330-01-217-2026)This subcontract requires the manufacture or procurement of 40 gaskets under NSN 5330-01-217-2026 to support DLA Weapons Support Land Supplier Operations Vehicle Support contracts. The supplier must adhere to RA001 technical requirements, ensuring all materials are asbestos-free per FED-STD-313 and contain no added mercury. Items must be packaged in MIL-DTL-117 Type II Class C Style 1 bags in accordance with MIL-STD-2073-1E and MIL-STD-129 standards. The final delivery of the 40 packaged gaskets is designated as FOB Origin to DLA Distribution DDSP New Cumberland.

All Other Miscellaneous Manufacturing

POSTED

about 23 hours ago

DEADLINE

Supply of Hydraulic Dolly-Type JacksThis subcontract, issued by the Department of Defense through the DLA Weapons Support Land Supplier Opns Vehicle Spt, requires the procurement or manufacture of three hydraulic dolly-type jacks. All units must strictly adhere to NSN 4910-00-243-6110 specifications and be delivered to the designated government location in New Cumberland. As part of the delivery, the contractor must provide one manufacturer's commercial manual for each unit, which must include comprehensive instructions for service, maintenance, and repair, along with a complete parts list. The opportunity was posted on October 27, 2026, with a response deadline of November 9, 2026, under NAICS code 423830.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

about 23 hours ago

DEADLINE

Supply of Gaskets (NSN 5330010676940)This subcontract involves the manufacture or procurement of 32 units of gaskets under NSN 5330010676940 to support prime contractors for the Defense Logistics Agency Weapons Support Land Supplier Operations. The project requires strict adherence to military packaging and marking standards, specifically utilizing medium duty, waterproof, greaseproof, opaque bags per MIL-STD-2073-1E and marking shipments according to MIL-STD-129 with Special Marking Code 20. The contractor must ensure full compliance with DFARS Buy American regulations and established cybersecurity standards. Final delivery of the 32 gaskets must meet RP001 packaging requirements and be delivered to the designated performance location in Tracy, California. This effort falls under NAICS code 326199 and is managed by the Department of Defense.

All Other Plastics Product Manufacturing

POSTED

about 23 hours ago

DEADLINE

Supply of Specialized Gasket (NSN 5330014535487)This subcontract involves the supply of one specialized gasket, part number 625.4730.196, which must meet the specifications for NSN 5330014535487. The item is intended for prime contractors delivering supply contracts to the Department of Defense, specifically the DLA Weapons Support Land Supplier Opns Vehicle SPT. The place of performance for this requirement is located at Schofield Barracks. The contractor is responsible for ensuring the gasket is packaged and sealed in medium duty, waterproof, greaseproof, and opaque bags according to MIL-DTL-117, Type II, Class C, Style 1 to provide necessary UV protection. Additionally, all marking must be performed in accordance with MIL-STD-129. The response deadline for this procurement is November 9, 2026.

All Other Miscellaneous Manufacturing

POSTED

about 23 hours ago

DEADLINE

Supplier of MLG Strut Seal Replacement KitsThis subcontract, issued by the Department of Defense through the DLA Weapons Support Land Supplier Opns Vehicle Spt, requires the supply of 17 MLG Strut seal replacement kits under NSN 5330-00-492-6735. The contractor is responsible for assembling the components into kits, providing protective cushioning, and including detailed contents lists. Due to the nature of the parts, the contractor must manage items designated as Critical Application and ensure full compliance with 29 CFR 1910.1200 regarding hazardous materials. The opportunity is a Total Small Business Set-Aside under NAICS code 423840, with performance taking place in Tracy, California. Interested parties must respond by November 9, 2026. The final deliverable consists of 17 boxed and cushioned seal replacement kits intended for prime contractors working on aircraft maintenance projects.

Industrial Supplies Merchant Wholesalers

POSTED

about 23 hours ago

DEADLINE

Supply of Vehicular Component Brackets (NSN 2590016091130)This subcontract involves the manufacture or sourcing of 30 specialized vehicular component brackets for the Department of Defense, specifically supporting DLA Weapons Support Land Supplier Operations. The components must strictly adhere to Part Piece Number 12504326-010 and NSN 2590016091130 as specified in the technical drawings. Performance will take place in Tracy, California, under NAICS code 332312. Critical compliance mandates include strict adherence to Berry Amendment domestic sourcing requirements to ensure materials are produced within the United States. Additionally, the use of additive manufacturing is prohibited unless explicit authorization is granted. The response deadline for this requirement is November 9, 2026.

Fabricated Structural Metal Manufacturing

POSTED

about 23 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS