This Government Contract opportunity from Department Of The Treasury was posted on January 5, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Notice of Intent to Sole source - Q-Mag Sensor Calibration and Maintenance

Closed

2031ZA26N00028Federal

Submission Closed01/19/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 811210

New

Federal

Flap Skew Detection Unit Overhaul ServicesThis subcontract for Flap Skew Detection Unit Overhaul Services involves performing comprehensive teardown, evaluation, repair, and reassembly of specialized units for prime contractors supporting NAVSUP Weapon System Support projects. The scope of work includes disassembling units, cleaning and inspecting components according to approved repair manuals, and replacing any parts that exceed established limits. To ensure quality and functionality, the contractor must utilize provided fixtures, jigs, and test equipment to verify that each unit reaches Ready for Issue status. All work must be performed in strict compliance with IPC/EIAJ-STD-001C and MIL-STD-454 standards. The project is based in Philadelphia and falls under NAICS code 811210. The final deliverable for this Department of Defense effort is a certified Ready for Issue unit.

Navsup Weapon Systems Support

POSTED

DEADLINE

Repair and Modification of Thrust Shoe w/InstrThis subcontract involves the teardown, evaluation, repair, and modification of Thrust Shoe w/Instr (NSN 016233028) for prime contractors supporting Navsup Weapon Systems Support Mech projects under the Department of Defense. The selected provider must be an authorized distributor of the original manufacturer and is required to disassemble and assess assets using precision tooling and technical orders in accordance with CAGE 75333 and Ref No. 482480-008. The primary objective is the delivery of a fully repaired and modified asset that meets all specified functional requirements. This opportunity falls under NAICS code 811210, with a response deadline set for November 4, 2026.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Precision Cleaning and Testing (MIL-STD-1330)This subcontract involves providing precision cleaning and testing services for prime contractors supporting Navsup Weapon Systems Support Mech projects under the Department of Defense. The scope of work focuses on executing Oxygen Clean processes for various shipboard components, including those used in oxygen, helium, helium-oxygen, nitrogen, and hydrogen systems. The contractor must utilize certified precision cleaning facilities to ensure the total absence of contaminants in accordance with MIL-STD-1330 standards. The final deliverables include certified Oxygen Clean filter components accompanied by formal certification of cleanliness. This opportunity falls under NAICS code 811210.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

F-15 DMS Processor and Cartridge RepairThis subcontract, titled F-15 DMS Processor and Cartridge Repair, involves the testing and repair of specialized avionics processing units and data cartridges for prime contractors supporting Air Force Sustainment Center F-15 Digital Mapping System projects. The scope of work specifically includes the maintenance of Advanced Display Core Processors, Digital Map Processors, Mission Cartridges, and Theatre Cartridges. To successfully deliver these fully repaired and tested components, the contractor must utilize specialized test equipment and maintain access to production-level technical data. Managed by the Department of Defense under agency FA8538 Afsc Pzaab, the work is designated under NAICS code 811210 and will be performed in Warner Robins. The opportunity was posted on October 21, 2026, with a response deadline of November 5, 2026.

POSTED

DEADLINE

UHF DMR Tier III System Maintenance ServicesThis subcontract for the Department of Veterans Affairs involves providing comprehensive maintenance, semiannual preventive services, and unscheduled repairs for UHF DMR Tier III systems within VA healthcare facilities. The scope of work includes the testing, calibration, and troubleshooting of Avtec radio communications systems as well as Tait repeaters and Motorola MOTOTRBO portable and mobile radios. To ensure system integrity, the contractor must provide factory-trained technicians who possess direct access to original equipment manufacturer software and calibration tools. The primary objective is to deliver a fully operational UHF DMR system supported by detailed maintenance logs. This opportunity falls under NAICS code 811210 and is managed by the Network Contract Office 8. Interested parties should note the response deadline of October 28, 2026.

248-NETWORK Contract Office 8 (36C248)

POSTED

DEADLINE

Hydraulic Servovalve Teardown, Repair, and TestingThis subcontract involves the teardown, evaluation, repair, and modification of hydraulic servovalves for prime contractors supporting Navsup Weapon Systems Support Philadelphia projects. The scope of work includes disassembling, cleaning, and inspecting assets, replacing components according to repair manuals, and conducting final unit testing using hydraulic test benches. The final deliverable is one Ready for Issue Hydraulic Servovalve, specifically NSN 4820-01-475-5713, accompanied by a detailed inspection report. To qualify for this project, the contractor must maintain ISO 9001 or SAE AS9100 certification and ensure full compliance with IPC/EIA-STD-001C standards. The contract falls under NAICS code 811210 and is managed under the Department of Defense.

Navsup Weapon Systems Support

POSTED

DEADLINE

Circuit Card Assembly (CCA) and Electronic Component Repair ServicesThis subcontract for the Department of Defense and NAVSUP Weapon Systems Support involves the technical repair, overhaul, and testing of electronic components and circuit card assemblies for prime contractors. The scope of work includes performing failure analysis, creating corrective action plans, and executing test procedures within ESD-protected environments to ensure all delivered items are in ready-for-issue condition. To qualify, providers must maintain ISO 9001 or SAE AS9100 certifications and adhere to ANSI/NCSL Z540.3 or ISO-10012-1 calibration standards. The opportunity is categorized under NAICS code 811210, with a response deadline set for November 20, 2026.

Navsup Weapon Systems Support

POSTED

DEADLINE

Turbosupercharger Teardown, Evaluation, and Repair ServicesThis subcontract involves providing comprehensive teardown, technical evaluation, repair, and modification services for a Turbosupercharger under the Navsup Weapon Systems Support Mech. The scope of work includes disassembling units to identify defects, performing repairs in accordance with technical orders and manuals, and conducting rigorous testing to ensure the final product meets original manufacturer specifications. The project requires the use of precision measurement equipment and specialized tooling, with strict adherence to MIL-STD-130, Rev N. The primary deliverable for this effort is one repaired Turbosupercharger, identified by NSN 2950-01-527-6898. This requirement falls under NAICS code 811210 and is managed by the Department of Defense. Interested parties must note the response deadline of November 4, 2026.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Cytek Aurora Spectral Flow Cytometer Maintenance ServicesThis subcontract involves providing comprehensive maintenance and repair services for Cytek Aurora Spectral Flow Cytometer Analyzers supporting projects for the National Heart, Lung, and Blood Institute under the National Institutes of Health. The scope of work includes performing annual on-site preventive maintenance, executing necessary repairs, and implementing software and firmware updates to ensure all instruments remain fully operational and meet manufacturer specifications. To qualify, the service provider must utilize field service engineers specifically trained by Cytek Biosciences. Key deliverables include the successful completion of maintenance tasks and the submission of detailed annual preventive maintenance reports. This opportunity is categorized under NAICS code 811210 and is managed through the Department of Health and Human Services.

National Institutes Of Health Olao

POSTED

DEADLINE

SERVICE AGREEMENT FOR THE CYTENA F SIGHT CELL SORTER BASE + TWO OPTION YEAR

Solicitation # 75N98027Q00016

The National Institutes of Health, specifically the National Institute on Deafness and Other Communication Disorders, intends to award a firm-fixed-price purchase order to Cytena for a service agreement covering the Cytena F.SIGHT Cell Sorter. The contract structure consists of a base year plus two option years and is designed to provide essential preventive maintenance and remedial repair services for the specific instrument serial number CYT-USI-2020-06-095. These services are critical to ensuring the operational performance, reliability, and data integrity of the equipment used in research activities. This is a sole-source acquisition based on the fact that Cytena is the original manufacturer and the only responsible source capable of satisfying the agency's requirements. While the government intends to solicit only from Cytena, interested parties may submit capability statements by 9:00 a.m. EDT on October 26, 2026, to demonstrate their ability to meet the technical and operational needs. The government anticipates making an award approximately five calendar days after the closing date if no other capable sources are identified.

National Institutes Of Health Olao

POSTED

DEADLINE

Integrated Logistics Division (ILD) Maintenance and Logistics Support Services

Solicitation # RFI-CBPILDDEAN2027

Information Technology Contracting Division

POSTED

DEADLINE

Solicitation # ILSMaintenance

The Department of Homeland Security, Customs and Border Protection (CBP) has issued a Request for Information (RFI) and Sources Sought notice for Integrated Logistics Division Maintenance and Logistics Support Services. This effort is for market research purposes to identify capable sources for corrective and preventative maintenance of both large-scale and small-scale Non-Intrusive Inspection (NII) equipment. The scope includes the execution of maintenance services, the provision of stakeholder reporting via dashboards and key process indicators, and the development of service level agreements. The maintenance workflow is managed through a 24/7 Maintenance Dispatch Center utilizing ServiceNow and MAXIMO to issue work orders and track completion. This opportunity is currently designated as a Small Business Set Aside, though the agency is using this RFI to determine if a small business or 8(a) set-aside is justifiable based on the availability of at least two capable firms. Interested respondents must submit their capabilities, business size status, and up to three past performance references by October 27, 2026, via email to the primary point of contact. Submissions are limited to 10 pages total, with a maximum of three pages per past performance reference and a total file size limit of 50 MB. This announcement is for planning purposes only and does not constitute a formal solicitation or a commitment to issue a procurement.

Information Technology Contracting Division

POSTED

about 4 hours ago

DEADLINE

in 6 days

General Info

Agency

Department Of The Treasury → Office Of The Chief Procurement Officer

NAICS

811210 - Electronic and Precision Equipment Repair and Maintenance

Place of Performance

DC, 20228, USA

Set-Aside

NONE

Documents

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedJan 5

special-notice

Response DeadlineJan 19

Deadline has passed

Submission Closed

01/19/2026, 05:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of The Treasury → Office Of The Chief Procurement Officer

Contacts1 person available

OfficeWASHINGTON, DC, 20228, USA

Organization / AgencyDepartment Of The Treasury → Office Of The Chief Procurement Officer

Office AddressWASHINGTON, DC, 20228, USA

Contacts

Sonia Barnhill

contact@example.gov

Full Description

The Bureau of Engraving and Printing (BEP) Office of the Chief Procurement Officer (OCPO) on behalf of the Office of Production Engineering (OPE) intents to award a sole source, fixed-price contract for the below:

Q-MAG SENSOR CALIBRATION AND MAINTENANTENCE SERVICES. (Proprietary OEM Services)

The intended contractor is Cummins Allison. The Government intends to award a sole source contract utilizing a Justification and Approval in accordance with FAR 13.5. A determination not to compete this requirement is solely within the discretion of the Government. Information received will be considered solely to determine whether to conduct a competitive procurement. Any cost associated with the preparation and submission of data or information, or any other costs incurred in responding to this notice is the sole responsibility of the respondent and will not be reimbursed by the Government. Responses MUST be received NO LATER THAN 12:00 PM, Eastern Standard Time (EST), 19 January 2026. Additionally, interested sources must be registered and currently active in the System for Award Management (SAM), found at https://www.sam.gov. Responses MUST be submitted in writing ONLY via email to Sonia.Barnhill@bep.gov within the closing date/time of publication of this notice.