Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Notice of Intent to Sole Source

Active
80GRC02600111Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

NASA’s Glenn Research Center plans to award a sole source firm fixed-price contract to Aitech Defense Systems, Inc. for the delivery of Service Pack 0 space-qualified, radiation-tolerant single-board computers, which are proprietary and currently integral to ground test architectures at both Glenn and Johnson Space Center. These systems are critical for ongoing risk reduction activities in software test labs, and replacing them would necessitate significant rework and delay mission-critical testing timelines, with flight hardware required by Fall 2027 to support system-level evaluations near year-end. The procurement follows FAR Part 12 and Part 15 authorities, justified under FAR 6.103-1(b) due to Aitech being the only responsible source capable of meeting the unique requirements. The NAICS code is 334111 for Electronic Computer Manufacturing, and interested parties may submit capabilities documentation via email by August 14, 2026, though the government retains full discretion to proceed without competition. Oral communications are prohibited, and the NASA Ombudsman clause applies for any concerns regarding the acquisition process.

General Info

NASA awards Aitech sole-source contract for radiation-tolerant computers critical to mission testing by Fall 2027.

Agency

National Aeronautics And Space AdministrationView Agency

NAICS

334111 - Electronic Computer ManufacturingView NAICS

Place of Performance

Chatsworth, CA, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

Posted

special-notice

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyNational Aeronautics And Space Administration
Contacts2 people available
OfficeUS
Organization / Agency
National Aeronautics And Space Administration
View Agency Profile
Office AddressUS
Contacts
Matthew Evans
Loretta James Hemphill

Full Description

Show more

NASA’s Glenn Research Center (GRC) intends to negotiate a sole source contract with Aitech Defense Systems, Inc. for Service Pack 0 (SP0) space-qualified, radiation-tolerant single-board computers. Currently, SP0 single-controller computers are proprietary designs from Aitech Defense Systems, Inc. 


SP0s currently reside within the existing ground test architecture at both GRC avionics group and JSC within Software Test Labs. This existing hardware will be used to reduce risk in these areas prior to the delivery of new hardware. Moving away from SP0s would result in significant deferral of risk reduction, as well as the need to update the software labs. The SP0 computers have been identified to fit the project needs and the schedule to meet these needs requires delivery of flight hardware by Fall-2027 (~12 months), to support system level testing near the end-2027. 


This procurement is being conducted in accordance with FAR Part 12 – Acquisition of Commercial Products and Commercial Services and FAR Part 15 – Contracting by Negotiation. NASA GRC anticipates awarding a firm fixed-price contract to Aitech Defense Systems, Inc. as the only responsible source reasonably available to satisfy the agency requirements under the authority of FAR 6.103-1(b). 


The applicable NAICS Code is 334111 – Electronic Computer Manufacturing 


Interested organizations may submit their capabilities and qualifications to perform the effort electronically via email to the identified point of contact not later than 5:00 p.m. Eastern Standard Time on August 14, 2026. Such capabilities/qualifications will be evaluated solely for the purpose of determining whether or not to conduct this acquisition on a competitive basis. A determination by the Government not to compete this acquisition on a full and open competition basis, based upon responses to this notice, is solely within the discretion of the Government. 


Oral communications are not acceptable in response to this notice. 


NASA Clause 1852.215-84, Ombudsman, is applicable. The Center Ombudsman for this acquisition can be found at: https://www.hq.nasa.gov/office/procurement/regs/Procurement-Ombuds-Comp-Advocate-Listing.pdf  

Similar Contracts

Same NAICS industry code

NAICS: 334111
New
Federal
COMPUTER SYSTEM,DIG
Solicitation # N0038326QPC50
The contract requests repair services for two units of a Computer System, DIG, identified by NSN 017013507 and Part Number 504045-1001, under Solicitation N0038326QPC50 issued by NAVSUP Weapon Systems Support. The contractor must restore these items to a Ready for Issue (RFI) condition in full compliance with the latest approved technical publications and repair manuals, with no deviations allowed without formal approval from the Basic Design Engineer and the government’s DCMA/ACO office. Repair turnaround time is strictly defined as 110 days from the physical receipt of the asset at the contractor’s facility, as recorded in the Commercial Asset Visibility system, and the contractor must also meet a monthly throughput requirement to be specified. The induction period is limited to 365 days after contract award, with any assets received after this date requiring bilateral agreement. Pricing is based on a negotiated firm-fixed price for each unit tied directly to meeting the RTAT, with financial consideration applied if the requirement is not met. The contractor is responsible for supplying all parts, materials, tooling, and facilities necessary to perform repairs, with Government Furnished Property not provided unless explicitly stated. All materials must be new unless otherwise authorized in writing, and cannibalization is strictly prohibited without explicit approval from NAVSUP WSS and the Basic Design Engineer. The contractor must maintain an ISO 9001/SAE AS9100-compliant quality system and a calibration system meeting ANSI/NCSL Z540.3 or equivalent standards. Configuration management must adhere to NAVSUP WSS clause NAVICPIA18, and all changes to drawings, specifications, or repair sources require prior government approval. Items deemed Beyond Economical Repair, Beyond Repair, or Missing on Induction must be reported to DCMA and the Inventory Manager for written concurrence before any action is taken, and repairs classified as Over and Above require similar approval. The contract enforces strict Buy American and Security Prohibition requirements, and the contractor must submit a complete source approval package via the NAVSUP WSS website to be eligible for award. Proposals must be submitted via email to abbey.r.ettinger.civ@us.navy.mil by the deadline, and early or incremental deliveries are preferred.
Navsup Weapon Systems Support

POSTED

about 8 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 334111
New
Federal
Combined Solicitation Notice - High-Performance AI/ML Workstation (NVIDIA Grace/Blackwell Architecture)
Solicitation # ACQ-26-A47
This solicitation seeks a single turnkey high-performance AI/ML workstation based exclusively on NVIDIA Grace/Blackwell hardware architecture to meet critical computing needs at Edwards AFB, California. The system must feature an integrated 72-core NVIDIA Grace CPU and B300 GPU on a single board, 496GB LPDDR5X and 252GB HBM3e memory with minimum 7.1 TB/s bandwidth, specific PCIe 5.0 expansion configurations, dual 2TB NVMe PCIe 5.0 SSDs preinstalled in a locked RAID 1 array, plus two additional PCIe 6.0 NVMe SSDs routed through a high-speed switch. A secondary NVIDIA RTX PRO 2000 Blackwell GPU with 16GB GDDR7 ECC memory, dual 400G QSFP112 networking ports, 10GBase-T and dedicated GbE management ports, and a 1600W Titanium-certified power supply are mandatory. The system must be housed in a tower chassis under 595mm depth, shipped with Ubuntu 24.04 LTS and fully validated NVIDIA AI software stack, and backed by a 3-year OEM warranty. All proposals must strictly adhere to the technical baseline with no substitutions permitted unless an "or equal" submission fully meets or exceeds each specified requirement. Quotations must be submitted electronically in two separate volumes: Volume I contains the technical proposal with a detailed Bill of Materials, compliance documentation, Section 508 ACR/VPAT, and verified OEM reseller authorization—without pricing—and Volume II contains a firm-fixed-price schedule with delivery lead time stated in Days After Receipt of Order. Only small businesses under NAICS 334111 with 1,250 employees or fewer are eligible, as this is a total set-aside. Evaluation is based on Best Value Tradeoff, with Technical Capability being a mandatory pass/fail threshold, Price assessed for completeness and reasonableness, and Delivery Schedule evaluated for speed and reliability to support urgent operational timelines. Offers must be sent to the designated Contract Specialist and Contracting Officer by the deadline of August 11, 2026, with performance to be delivered FOB destination to Edwards AFB, California.
FA9302 Aftc Pzz

POSTED

about 8 hours ago

DEADLINE

in 5 days
View Details
NAICS: 334111
New
DIBBS
Supplier of Interface Units, Automatic Data ProcessingThe contract requires the supply of 246 Interface Units, Automatic Data Processing, identified by NSN 7025-01-707-2797, with strict adherence to military specifications covering packaging, marking, and hazardous materials handling to ensure compliance with defense logistics standards. Delivery must be made FOB origin, with full fulfillment expected within 50 days from the contract award date, placing responsibility on the supplier to manage timely shipment and documentation. The equipment is intended for use by the Department of Defense, specifically under the Construction & Equipment T & IFO EQ office, with performance taking place at New Cumberland, Pennsylvania, 17070-5002. This is a subcontract solicitation under NAICS code 334111, which pertains to computer and peripheral equipment manufacturing, indicating the supplier must possess relevant technical capabilities to produce defense-grade data processing components. The solicitation was posted on August 5, 2026, with responses due by August 17, 2026, providing a limited window for qualification and submission. Although no set-aside designation is specified, the procurement remains within the broader DOD framework, requiring strict compliance with federal acquisition and defense supply protocols, including all applicable security, traceability, and material handling requirements. All details and correspondence are accessible through the official DIBBS platform via the provided URL.
CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

1 day ago

DEADLINE

in 11 days
View Details
NAICS: 334111
New
DIBBS
DONGLE
Solicitation # SPE8EN-26-T-2827
This contract pertains to the procurement of 66 units of a dongle item identified by NSN 7025-01-682-6881 and part number SY-CRD20220, issued under solicitation SPE8EN-26-T-2827. The requirement is for delivery within 38 days to the DLA Distribution facility in New Cumberland, Pennsylvania, with FOB origin terms and zero variance allowed in quantity. Inspections and acceptance occur at the destination, and all items must be packaged in compliance with ASTM D3951, fully aligned with DLA Master List of Technical and Quality Requirements, and marked and labeled per MIL-STD-129. Palletization must adhere to DLA packaging guidelines, and the unit of issue is each (EA), with a total contract price of $3,960 at $60 per unit. Technical and quality specifications referenced via R or I numbers are governed by the DLA Master List effective on the solicitation issue date. No approved technical data package exists for this NSN, and suppliers are directed not to request one from DLA Troop Support. The contract mandates compliance with covered defense information protocols and specifies transportation instructions via DLAD Proc Notes C19 and C20. The required ship date is August 6, 2026, with an original delivery deadline of November 10, 2026. The point of contact for the contract is Jennifer Esworthy at DLA, with a response deadline of August 17, 2026, and the solicitation falls under NAICS code 334111 for computer and peripheral equipment manufacturing.
CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

1 day ago

DEADLINE

in 11 days
View Details
NAICS: 334111
New
DIBBS
COMPUTER SYSTEM, DIGITA
Solicitation # SPE8EN-26-T-2855
This contract specifies the procurement of five units of a ruggedized computer system configured with an Intel i7-1165G7 processor, 32GB RAM, 1TB PCIe SSD, Windows 10 Pro 64-bit, touchscreen Full HD LCD display, backlit keyboard, Wi-Fi, Bluetooth, 4G LTE connectivity with integrated GPS/Glonass, Thunderbolt 4, HDMI, and RJ45 ports, manufactured by GETAC under part number ST4Q4GQAWJXX. The system must comply with strict technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation or award date. Mercury and mercury-containing compounds are prohibited in all hardware or supplies unless explicitly exempted for functional uses in batteries, fluorescent lights, sensors, weapons systems, or specified reagents, and any portable mercury-containing devices must include shockproof construction and a secondary containment boundary per NAVSEA 5100-003D. The contract requires delivery of five units within 56 days to the designated receiving warehouse in Tracy, California, under FOB Origin terms with no quantity variance permitted. All items must be packaged in strict accordance with MIL-STD-2073-1E and MIL-STD-129, using designated packaging methods, materials, and container codes, with palletization following DLA’s packaging requirements. The product is identified by NSN 7010016657339 and linked to Purchase Request 7017768130 under solicitation SPE8EN-26-T-2855, with an original required delivery date of September 5, 2026. Documentation must adhere to source approval request standards, and covered defense information protocols apply. Transportation logistics are governed by DLA procedural notes C19 and C20, and all marking and unit of issue compliance must align with authorized DoD and ANSI X12 standards. The point of contact for the contract is Jennifer Esworthy at the Department of Defense’s Construction & Equipment T&IFO EQ office.
CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

1 day ago

DEADLINE

in 11 days
View Details
NAICS: 334111
New
DIBBS
COMPUTER SUBASSEMBL
Solicitation # SPE8EN-26-T-2780
The contract involves the procurement of 15 units of a computer subassembly identified by NSN 7050-01-510-8291 under solicitation SPE8EN-26-T-2780, with a required delivery within 48 days of award. All supplies must comply with the DLA Packaging Requirements for Procurement and incorporate technical and quality standards listed in the DLA Master List of Technical and Quality Requirements, with the applicable revision governed by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions unless amended. The contract strictly prohibits the intentional addition of mercury or mercury-containing compounds to any hardware or supplies, except for functional uses in batteries, fluorescent lights, required instruments, sensors or controls, weapon systems, and chemical analysis reagents specified by NAVSEA. Portable fluorescent lamps and instruments containing mercury must be shockproof and include a secondary containment boundary in accordance with NAVSEA 5100-003D. Removal of all government identification from non-accepted supplies is mandatory. The place of performance is specified as New Cumberland, PA, 17070-5002, with primary point of contact Jennifer Esworthy reachable via email and phone. The solicitation was posted on August 5, 2026, and responses are due by August 17, 2026, under the NAICS code 334111 for computer and peripheral equipment manufacturing, managed by the Department of Defense through the Construction & Equipment T & IFO EQ office.
CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

1 day ago

DEADLINE

in 11 days
View Details

More opportunities from National Aeronautics And Space Administration

Same awarding agency

NAICS: 54171
New
Federal
Community Announcement: Release Status of an Earth Venture Orbital Solicitation
Solicitation # NNH26ZDA005L
NASA has issued a Community Announcement, NNH26ZDA005L, to notify the scientific and industry community of an upcoming solicitation for the first Earth Venture Orbital (EVO-1) mission opportunity, with the announcement reactivated on August 1, 2026 to update participants on revised Q&As posted to the program’s homepage. This pre-solicitation notice outlines NASA’s intent to invite Principal Investigator (PI)-led, cost-capped investigations for Low Earth Orbit missions, with proposed budgets ranging from $35 million to $115 million in FY2026 dollars, excluding NASA-provided launch and engineering support. The initiative emphasizes rapid time-to-science, targeting selection within six months of proposal submission and launch within three to four years of project approval, and encourages the use of commercial products, services, and practices—including COTS technologies, commercial launch services via the VADR program, and co-flying on existing missions—to reduce cost and schedule risk. All awarded missions are required to deliver fully integrated space systems ready for launch, ensure full open access to data, algorithms, software, and documentation under NASA’s SPD-41A policy, and establish non-NASA partnerships to sustain operations beyond the mission lifecycle. While the formal solicitation is expected in the fourth quarter of 2026, current guidance mandates compliance with NPR 7120.5 for project management and SPD-48 for tailored Class D mission development. Proposals may encompass a variety of mission architectures, including instruments hosted on NASA platforms, CubeSat-class observatories, or fully self-provided missions. The announcement is open to all types of organizations—including U.S. and international entities such as universities, industry, nonprofit organizations, and FFRDCs—with no setaside provisions specified. Questions and comments must be submitted via email to Michael Kaszyca and Nadya Vinogradova Shiffer with the subject line “EVO-1 CA,” and all official documentation is available on the EVO-1 Acquisition Homepage and SAM.gov. Formal evaluation factors, contract clauses, pricing structure, submission format, and acceptance criteria will be detailed in the upcoming Draft Announcement of Opportunity, which is not yet published. The final solicitation will include all necessary representations, certifications, delivery terms, and administrative data, while the current posting serves as an advanced notice to allow the community time to prepare.

POSTED

5 days ago

DEADLINE

in 25 days
View Details
NAICS: 541715
Federal
Program Year 2026 Civilian Commercialization Readiness Pilot Program (CCRPP)
Solicitation # 80NSSC26R0013
The Civilian Commercialization Readiness Pilot Program (CCRPP) for 2026, solicited under 80NSSC26R0013, is a competitive federal initiative designed to accelerate the commercialization of technologies developed through SBIR and STTR Phase II programs. Eligible small businesses may apply for funding that combines private sector investment with matching NASA funds ranging from $500,000 to $2.5 million per award, with a maximum total award value of $5 million. This program is not intended for incremental development but rather to propel high-potential, heavyweight technologies toward rapid transition into both NASA missions and commercial markets, as mandated under 15 U.S.C. 638(uu). Applications must be submitted electronically via the ProSAMS portal by the deadline of August 19, 2026, and are limited to small business concerns as defined by the SBA, with a full small business set-aside in place under FAR 19.5. The program requires strict adherence to U.S. manufacturing and ownership standards, with prohibitions on funding activities involving China or designated foreign entities, and mandates disclosures of any foreign affiliations or investments. The evaluation process prioritizes scientific and technical merit, the qualifications and facilities of the proposing team, the effectiveness of the proposed work plan, and most critically, the commercial potential and feasibility of the technology, including its market strategy, competitive landscape, intellectual property safeguards, and past commercialization success. Proposals must include a technical application of no more than 30 pages, a detailed budget, a letter of commitment from private investors, commercialization metrics, and multiple certification and disclosure forms, particularly regarding foreign relationships and vendor sourcing. Contracts are awarded on a firm fixed-price basis with a standard 24-month performance period, extendable to 30 months, and require compliance with extensive NASA-specific clauses covering intellectual property ownership, IT security, sensitive data handling, reporting, and whistleblower protections. Invoicing is conducted exclusively through the Treasury’s Invoice Processing Platform, and all work must occur within the United States using American-made equipment and materials. Failure to meet disclosure obligations, use of prohibited foreign entities, or noncompliance with reporting, security, or personnel requirements may result in disqualification or contract termination.
Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

about 1 month ago

DEADLINE

in 13 days
View Details
NAICS: 541512
Federal
Cybersecurity and IT Resource ProtectionThe contract titled Cybersecurity and IT Resource Protection is a subcontract under a Total Small Business Set-Aside, aimed at implementing robust cybersecurity controls for IT systems utilized in research and development activities. The work must align with NASA’s cybersecurity policies for unclassified systems, specifically requiring full compliance with NIST Special Publication 800-171 and the Cybersecurity Maturity Model Certification (CMMC) Level 2 framework. This includes the deployment, validation, and ongoing maintenance of security measures to protect controlled unclassified information and ensure the integrity, confidentiality, and availability of systems and data throughout the R&D lifecycle. The subcontractor is expected to have the expertise to assess existing IT infrastructure, identify gaps, and execute remediation plans in accordance with federal standards without reliance on classified systems or protocols. The opportunity is open to small businesses as defined by the Small Business Administration, with a NAICS code of 541512 indicating it falls under Custom Computer Programming Services. The solicitation was posted on June 24, 2026, with proposals due by August 19, 2026, at 9:00 PM Eastern Time. Performance will be conducted at locations designated by NASA, though specific geographic details are not provided. The contract emphasizes compliance over customization, meaning the selected party must demonstrate proven ability to meet stringent federal cybersecurity requirements, not merely offer technological solutions. Although no point of contact or physical office address is listed, the submission and management of the opportunity will be handled through the SAM.gov platform using the provided UI link.
Computer Systems Design Services

POSTED

about 1 month ago

DEADLINE

in 13 days
View Details
NAICS: 541611
Federal
Commercialization Strategy and Market Transition PlanningThe contract seeks to develop comprehensive commercialization roadmaps and market transition strategies for dual-use technologies originating from SBIR and STTR programs, focusing on bridging the gap between government-funded research and private sector adoption. Key deliverables include detailed market analyses to identify viable commercial applications, targeted customer engagement strategies to validate demand and refine product-market fit, and structured investor outreach plans designed to secure funding and accelerate scale-up. The work is intended to enhance the pathway from prototype to market-ready solution by aligning technological capabilities with real-world commercial needs across both defense and civilian sectors. This is a small business set-aside subcontract under NAICS code 541611, managed by NASA, with a response deadline of August 19, 2026. The effort requires deep expertise in technology commercialization, market intelligence, and stakeholder engagement, particularly in navigating the complexities of dual-use applications. While no specific location is designated for performance, the contractor must possess the capability to conduct nationwide or potentially international market assessments and engage with a broad range of industry partners, government stakeholders, and potential investors. The goal is to significantly increase the rate of successful technology transfer and commercialization outcomes for NASA-backed innovations.
Administrative Management and General Management Consulting Services

POSTED

about 1 month ago

DEADLINE

in 13 days
View Details
NAICS: 541330
Federal
Technology Integration and Systems Engineering SupportThe National Aeronautics and Space Administration is soliciting subcontract proposals under a Total Small Business Set-Aside to provide technology integration and systems engineering support for innovations developed through the Small Business Innovation Research and Small Business Technology Transfer programs. The scope of work focuses on facilitating the insertion of SBIR/STTR-derived technologies into larger, complex systems by delivering interface design services, conducting rigorous compatibility testing, and performing system-level validation to ensure seamless operational integration. This effort requires technical expertise in systems engineering, electrical and software interoperability, and validation methodologies to bridge the gap between standalone innovations and mission-critical platforms. Proposals must be submitted by August 19, 2026, and are open exclusively to small business concerns as defined by the Small Business Administration under NAICS code 541330, which encompasses engineering services. The contract is structured as a subcontract, emphasizing collaboration with prime contractors and technology developers to accelerate the transition of federally funded research into operational capabilities. While no specific place of performance is designated, work is expected to align with NASA's broader systems integration objectives and may involve coordinated efforts across multiple facilities or partner organizations. All respondents must be certified small businesses eligible for the set-aside, and the solicitation underscores the importance of proven experience in integrating emerging technologies into aerospace or defense systems.
Engineering Services

POSTED

about 1 month ago

DEADLINE

in 13 days
View Details
NAICS: 927110
Federal
NASA Request for Information (RFI) – Neutral Buoyancy Laboratory (NBL) Facility Commercial Utilization
Solicitation # 80JSC025NOC02
NASA’s Johnson Space Center is seeking interest from commercial entities, educational institutions, non-profits, and other government agencies to utilize the Neutral Buoyancy Laboratory (NBL), a world-class underwater facility designed for simulating zero-gravity and lunar surface conditions. The NBL is a 6.2-million-gallon pool measuring 202 feet by 102 feet with a 40-foot depth, maintained at 84–86 degrees Fahrenheit with advanced filtration for optimal visibility. It supports complex operations including aquatic training, search and rescue, remotely operated vehicle testing, habitat validation, and underwater simulations under darkened, chilled, or storm-like conditions. The facility features integrated control rooms, SCUBA and surface-supplied dive systems, breathing gases including nitrox, medical and safety personnel, hyperbaric chambers, two 25-ton and three 1.6-ton cranes, Davit cranes, lifting equipment, secure storage, uninterruptible power, compressed air, chilled water, and 24/7 badge-controlled security with guard-gated access. Located adjacent to the Houston Spaceport and Ellington Airfield, it enables direct delivery of large hardware via taxiway and offers secure indoor and outdoor staging areas. Interest is being solicited through a Request for Information with responses due by 5:00 p.m. CST on September 30, 2026, to be submitted via email to elizabeth.kosobud@nasa.gov. Submissions must include entity name, point of contact details, proposed usage, and requested timeframe, and must not contain any proprietary information as such data will not be reviewed. This RFI is purely for planning and does not constitute a solicitation, contract, or funding commitment; NASA will not reimburse respondents for any costs incurred. Responses will be used internally to assess potential future requirements, refine capabilities, and inform potential contracting strategies, with no evaluation outcomes or feedback provided to submitters. Data collected will remain within the government and not be disclosed externally.
Space Research and Technology

POSTED

3 months ago

DEADLINE

in about 2 months
View Details
NAICS: 541330
Federal
Spectrum and Resources Management, Engineering and Programmatic Support (SpectRE) Services Maximum Ordering Value Increase and Ordering Period End-date Extension
Solicitation # 80HQTR21D0003
NASA Headquarters plans to extend the ordering period of the Spectrum & Resources Management, Engineering and Programmatic Support (SpectRE) services contract with Agile Decisions Services, LLC by one additional year, through March 31, 2027, while increasing the contract’s maximum ordering value by $22,342,052. This contract, originally awarded competitively in 2021 as a hybrid Cost-Plus-Fixed Fee and Firm-Fixed Price IDIQ contract, had an initial ceiling of $68 million with a five-year ordering period. The extension and funding increase will support continued services from April 1, 2026, to March 31, 2027, without a follow-on procurement planned. ADS provides expertise in regulation management, budget formulation, public engagement, and programmatic support critical to NASA’s mission and Space Communications and Navigation Program. ADS’s ongoing support is essential for maintaining NASA’s leadership in space communication and navigation, including spectrum management, compatibility analysis, radio investigations, GPS technologies, and orbital debris management. These functions support both NASA’s operational needs and the U.S. commercial space communications sector. NASA will invoke FAR 6.103-1 for this non-full and open competition extension but invites interested organizations to submit their capabilities for consideration by March 23, 2026. The decision to conduct competitive acquisition rests solely with NASA, emphasizing the contractor’s unique knowledge that underpins continuity and mission success.
Engineering Services

POSTED

4 months ago

DEADLINE

N/A
View Details