This Solicitation opportunity from Government of Canada was posted on June 8, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

NPP 26-58005 High Performance RF and Microwave Test and Measurement Equipment

Closed

26-58005International

Submission Closed06/23/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 334515

New

DIBBS

Supply of Chlorine Measurement Chips (Technical Analyzer Components)The contract seeks the procurement and delivery of two chlorine measurement chips designed for integration into a chip-measurement-system analyzer, with a precise detection range of 0.20 to 10.0 parts per million. These components must fully comply with Department of Defense technical standards and be packaged in accordance with the Medical Marking Standard No. 1 to ensure proper handling, identification, and traceability. The chips are critical sensor elements for monitoring chlorine levels in specialized analytical applications within the medical supply chain. The solicitation, issued under the NAICS code 334515 for Other Semiconductor and Related Device Manufacturing, is classified as a subcontract and was posted on July 22, 2026, with a response deadline of July 29, 2026. Performance will occur at Vandenberg Air Force Base, California, with the contracting activity managed by the Department of Defense through the Medical Supply Chain FSH. All deliverables must meet stringent technical and packaging specifications to ensure compatibility, accuracy, and reliability in operational environments.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

Supply of Fault Locating Indicators (NSN 6625-00-333-1048)The contract involves the manufacture and supply of 43 units of fault locating indicators meeting the military performance specifications MIL-PRF-83287/1D and MIL-PRF-83287G, designed for use in defense applications and incorporating integrated batteries. These devices are identified by the National Stock Number 6625-00-333-1048 and are intended for reliable operation in demanding military environments. The contract is structured as a subcontract under the Department of Defense through the Maritime Supply Chain organization, with the North American Industry Classification System code 334515 indicating classification within electronic components manufacturing. The solicitation was posted on July 22, 2026, and responses are due by August 6, 2026, with no set-aside designation specified. Performance location details are not provided, and there is no designated point of contact listed in the documentation. The contract is accessible via the DIBBS system at the provided URL, where potential subcontractors can review full requirements and submit proposals to fulfill the delivery obligation for the specified indicators.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

LEAD, TESTThe solicitation seeks two units of LEAD, TEST with NSN 6625-00-042-4430 under contract SPE7M1-26-T-221T, with a firm delivery deadline of 20 days after award. Full and open competition applies, and the procurement is governed by DLA packaging requirements and technical quality standards listed in the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation issue date or amendment date if modified. Cybersecurity compliance mandates CMMC Level 2 certification through a certified third-party assessment organization, and all contractors must adhere to DFARS 252.225-7048 for the handling of export-controlled technical data subject to ITAR or EAR regulations, which prohibits unauthorized disclosure to foreign persons regardless of location. Access to such data is restricted to contractors with approved US/Canada Joint Certification Program status who have completed mandatory DLA training and questionnaire. The item is to be delivered to Keyport, WA, with a response deadline of August 3, 2026, and the NAICS code 334515 applies. Primary point of contact is Michael Reese at the provided email and phone number.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

INDICATOR, FAULT LOCATIThe contract is for the procurement of an Indicator, Fault Locator, identified by NSN 6625003750538, under an indefinite-delivery/indefinite-quantity (IDIQ) contract with a maximum value of $350,000.00. The estimated quantity of 38 units is non-binding and may not be purchased, with delivery required within 92 days after the date of order. The item is classified as a commercial item under FAR 11.001, and its performance must meet the technical specifications of MIL-PRF-83287/1D and MIL-PRF-83287G. It is subject to a prohibition on the use of Class I ozone-depleting substances in any phase of design, manufacturing, or testing, unless written approval from the Contracting Officer is obtained. The item is identified as a critical application item and may contain batteries. A CMMC Level 2 Self-Assessment is required for cybersecurity compliance, and the contractor must safeguard covered defense information under FAR 52.204-7012. The item is also subject to requirements under the prohibition on covered defense telecommunications equipment and services, and the contractor must comply with all applicable clauses on combating human trafficking, employment eligibility verification, and equal opportunity. Packaging and marking must adhere strictly to MIL-STD-129 for labeling, barcoding, and unit identification, with palletization governed by RP001 DLA Packaging Requirements. Non-hazardous materials must be commercially packaged per ASTM D3951 unless superseded by DLA Technical and Quality Requirements, which take precedence. Hazardous materials, if applicable, must be packaged under TQ Requirement IP025 as defined by DLA standards, despite the cancellation of FED-STD-313. All packaging must be marked with the NSN, CLIN, U/I, QUP, and FOB Origin details. Inspection and acceptance occur at the destination by the Government under FAR 52.246-2. Invoicing is exclusively through WAWF, and contractors must be registered on the WAWF system. The contract includes clauses mandating compliance with sustainability standards, hazardous material handling, whistleblower protections, and restrictions on arbitration agreements. Offerors must provide a Unique Entity Identifier and may be required to self-certify as a small business, WOSB, SDVOSB, HUB

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

INDICATOR, FAULT LOCATIThis contract is an indefinite-delivery contract under the Department of Defense’s Maritime Supply Chain for the procurement of a fault locating indicator, identified by NSN 6625-00-333-1048, and classified as a commercial item including “commercial of a type.” The line item quantity of 43 units is strictly an estimate and not a binding obligation, with a total estimated contract value ceiling of $350,000.00. Delivery is required within 60 days of placement of any order, with FOB Origin terms applying, and all shipments must be inspected and accepted at the destination point. Packaging must comply with MIL-STD-129 for marking and labeling, with hazardous materials packaged per TQ Requirement IP025 and non-hazardous materials per ASTM D3951, though all DLA Master List of Technical and Quality Requirements supersede ASTM standards. Palletization must adhere to RP001, and the item must meet the performance specifications outlined in MIL-PRF-83287/1D and MIL-PRF-83287G. The item may contain batteries and is designated as a critical application item with a qualified product list status. The contract imposes extensive compliance obligations under various FAR and DFARS clauses, including safeguards for covered contractor information systems, trafficking in persons, employment eligibility verification, sustainable products, and hazardous material identification. Special requirements include the mandatory submission of hazard warning labels and Material Safety Data Sheets for any hazardous materials not exempted by specific federal statutes, and adherence to NIST SP 800-171 for cybersecurity. All invoices and receiving reports must be submitted electronically through the Wide Area WorkFlow system, and delivery must be made using U.S.-flag vessels where applicable. Offerors must provide a Unique Entity ID and CAGE code, and are required to certify their small business status, including HUBZone, WOSB, SDVOSB, and 8(a) classifications if applicable. Proposals must be submitted electronically via DIBBS by the deadline of August 6, 2026, with technical data uploaded through a designated DLA portal. The contract includes clauses related to changes, default, subcontracting, accelerated payments to small business subcontractors, and prohibitions on acquiring items from Communist Chinese military companies or using hexavalent chromium, ensuring alignment with federal policies on procurement integrity, safety, and national security.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

CHIP, CHLORINEThe contract pertains to the procurement of two units of CHIP, CHLORINE, a measurement system analyzer with a range of 0.20 to 10.0 PPM, identified by NSN 6630-01-482-9263. The item is subject to stringent technical and quality requirements incorporated from the DLA Master List of Technical and Quality Requirements, with packaging governed by DLA packaging standards and the Medical Marking Standard No. 1, which supersedes MIL-STD-129. Each unit must be properly sealed in a commercial container that protects against damage and packed in suitable exterior shipping containers to ensure safe, cost-effective delivery to Vandenberg AFB, California, within 20 days of award. The item is classified as a TYPE I (CODE M) supply with a non-extendable 24-month shelf life, requiring that no more than three months have passed between the date of manufacture and delivery to the government. All labels must clearly show the date of manufacture, expiration or retest date, and the contract or lot number in compliance with MMS1C. The solicitation, issued under SPE2DH-26-T-5408, was posted on July 22, 2026, with responses due by July 29, 2026, and is directed by the Department of Defense’s Medical Supply Chain FSH through Point of Contact Tina Vu.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

Supply of Signal Hound Spectrum AnalyzersThe contract seeks the supply of commercial off-the-shelf spectrum analyzers, specifically the SM435B, SM200B, SP145, and BB60D models, for use in RF signal detection and analysis. These instruments are critical for monitoring, identifying, and characterizing radio frequency emissions and must meet the technical requirements necessary for operational deployment in defense-related applications. The contract is structured as a subcontract under the Department of Defense, with the Naval Surface Warfare Center Crane serving as the responsible agency, and the performance location is designated as Crane, Indiana, with a ZIP code of 47522. The solicitation was posted on July 22, 2026, and responses are due by July 27, 2026, at 8:00 PM Eastern Time, leaving a narrow five-day window for submissions. The NAICS code 334515 classifies this procurement within the instrumentation manufacturing sector, indicating that the supplier must be capable of delivering certified, ready-to-use equipment without custom modification. All equipment must be commercially available and fully compliant with the specifications required for military-grade RF analysis tasks.

POSTED

DEADLINE

Tektronix OscilloscopeNASA/NSSC is seeking to award a sole source contract to Tektronix, Inc. in Beaverton, Oregon, for the acquisition of Tektronix Oscilloscopes under FAR 12.102(a), as it has been determined that Tektronix is the exclusive provider of this equipment. The procurement will be managed by NASA/NSSC with performance taking place at NASA’s Glenn Research Center, and the acquisition will follow commercial item procedures outlined in FAR Part 12. The NAICS code for this requirement is 334515. Interested parties may submit written capabilities and qualifications to the designated point of contact no later than 12:00 p.m. Central Standard Time on July 27, 2026, to allow the government to evaluate whether competitive procedures are warranted; however, the decision to proceed without competition rests solely with the government. Oral communications are not permitted in response to this notice. The NASA FAR Supplement Clause 1852.215-84, Ombudsman, applies, and information regarding the Center Ombudsman is available through the provided link. The solicitation number is 80NSSC26938255Q, with the notice posted on July 22, 2026, and the response deadline set for July 27, 2026. Primary contact is Sara Jusino-Terry at sara.a.jusino-terry@nasa.gov, with Karen Artis as the secondary contact.

NASA Shared Services Center

POSTED

DEADLINE

66--INDICATOR,FAULT LOCATIThe contract solicitation pertains to the procurement of 38 units of the indicator, fault location, with the NSN 6625003750538, under solicitation number SPE7M126U4522, with a response deadline of August 6, 2026. The item is classified under NAICS code 334515 and is designated as a qualified products list item, meaning only listed manufacturers may qualify. The solicitation is electronic-only, and quotations must be submitted electronically through the SAM.gov portal; no hard copies are available. The resulting contract, if awarded, will be an indefinite delivery contract with a one-year term or until aggregate orders reach $350,000, whichever comes first, with a guaranteed minimum order of five units. Annual order volume is estimated at one order, and deliveries will be distributed to multiple DLA depots across CONUS and OCONUS locations via consolidated and containerized shipping. The issuing agency is the Department of Defense through DLA Land and Maritime, based in Columbus, Ohio, and all inquiries must be directed via email to the designated point of contact listed in the solicitation.

DLA Land And Maritime

POSTED

DEADLINE

66--INDICATOR,FAULT LOCATIThe contract seeks the procurement of 43 units of NSN 6625003331048, an indicator for fault location, under a solicitation that may lead to an Automated Indefinite Delivery Contract with a one-year term or until aggregate orders reach $350,000, whichever comes first. The guaranteed minimum quantity is six units, with estimated annual orders at one, and deliveries will be distributed to various CONUS and OCONUS DLA depots via consolidation and containerization points. This item is on a Qualified Products List, and the solicitation is issued as an RFQ accessible only electronically through the provided link, with no hard copies available. All responsible sources may submit quotes electronically by the deadline, and military specifications and standards can be obtained electronically. The contract is managed by the DLA Land and Maritime office in Columbus, Ohio, under NAICS code 334515, with inquiries directed to the designated point of contact via email.

DLA Land And Maritime

POSTED

DEADLINE

SIGNAL HOUNDThe U.S. Navy’s Naval Surface Warfare Center Crane is soliciting a sole-source contract with Signal Hound, LLC, for the procurement of spectrum analyzers under solicitation number N00164-26-Q-0258, with the North American Industry Classification System code 334515. The requirement is set for a direct award due to Signal Hound’s exclusive proprietary ownership of the devices’ data, schematics, and internal technical expertise, along with their possession of critical repair and replacement components necessary for accurate and timely maintenance. The government has determined that no other source can meet these unique technical demands, and while other vendors may submit capability statements, the decision not to compete remains entirely at the government’s discretion. The solicitation follows FAR Part 13 procedures, with a synopsis exception applied, and all submissions must be emailed to Cierra Vaughn at cierra.n.vaughn2.civ@us.navy.mil no later than 4:00 PM Eastern Time on July 27, 2026. Offerors must be currently registered in the System for Award Management and are responsible for monitoring sam.gov for any amendments prior to the deadline. This contract is not subject to any set-aside classifications and is issued as a full and open procurement with no competition.

POSTED

DEADLINE

Extreme Environment Probing StationThe Naval Research Laboratory intends to award a sole source purchase order to INSTEC for an Extreme Environment Probing Station and accessories, citing that only this single responsible source can meet the agency’s unique requirements. The procurement falls under NAICS code 334515 with a size standard of 750 employees and is classified under FSC/PSC 6640. The acquisition will be conducted under Simplified Acquisition Procedures in accordance with FAR 12.201-1, as the estimated value does not exceed the $350,000 threshold. Despite the sole source intent, interested parties have fifteen calendar days from the notice publication to submit evidence demonstrating that competitive bidding would benefit the government, though any such submissions will be reviewed at the government’s sole discretion and no costs incurred in responding will be reimbursed. The procurement is designated as a Total Small Business Set-Aside under SBA guidelines, but the sole source determination supersedes this set-aside unless competition is warranted based on submitted feedback. The point of contact for inquiries is Richard Key, and all correspondence must reference the notice number in the subject line and include contact details for proper processing.

Naval Research Laboratory

POSTED

1 day ago

DEADLINE

in about 15 hours

AI Contract Overview

The National Research Council of Canada is procuring advanced RF and microwave test and measurement equipment under solicitation number 26-58005 to support research, development, testing, and evaluation activities for Counter Unmanned Aircraft Systems at its Radio Frequency – Electronic Warfare laboratory in Mirabel, Quebec. This procurement is exclusively set aside for Indigenous businesses under the federal Procurement Strategy for Indigenous Business, excluding all trade agreements that would otherwise permit non-Indigenous participation. Only suppliers invited and confirmed as Indigenous through the Indigenous Business Directory are eligible to bid, and all submissions must be made electronically to the NRC Bid Receiving Unit. The contract will be awarded on a lowest-price basis, with separate awards issued per item to the lowest-priced compliant Indigenous bidder. All equipment must be delivered by March 31st, 2027, and must meet the specified technical requirements for use in the Centre for Drone Innovation. The procurement adheres to the Integrity Regime administered by Public Services and Procurement Canada, and bidders must be registered in the Indigenous Business Directory to qualify. Documents may be submitted in either English or French, and all amendments to the solicitation will be sent directly to invited bidders without public notice. The closing date for bids has been extended to June 26th at 2:00 p.m. EDT, and no other terms or conditions have been modified.

General Info

Indigenous businesses invited to bid on RF/microwave equipment for drone research, delivery by March 2027.

Agency

Government of Canada → National Research Council of CanadaView Agency

NAICS

334515 - Instrument Manufacturing for Measuring and Testing Electricity and Electrical SignalsView NAICS

Place of Performance

Canada, CAN

Set-Aside

NONE

Documents

(1)

Notice of Proposed Procurement 26-58005 High Performance RF and Microwave Test Equipment

PDF•presolicitation

AI Contract Breakdown

Uniform Contract Format

Timeline

PhaseClosed

PostedJun 8

Solicitation

Response DeadlineJun 23

Deadline has passed

Submission Closed

06/23/2026, 07:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyGovernment of Canada → National Research Council of Canada

Contacts1 person available

OfficeN/A

Organization / Agency

Government of Canada → National Research Council of Canada

View Agency Profile

Office AddressN/A

Contacts

Katie HomuthContracting Authority

contact@example.gov

+1 (555) 000-0000

Full Description

NOTICE OF PROPOSED PROCUREMENT (NPP) Title: High Performance RF and Microwave Test and Measurement Equipment Solicitation Number: 26-58005 Publication Date: 08 June 2026 Trade Agreements: This procurement is set aside from all the trade agreements under the provision each has that permits the procurement to be set aside for Indigenous business. Region of Opportunity: Canada Region of Delivery: Mirabel, Quebec Canada GSIN: N5975 – Electrical Hardware and Supplies – 32130000 Electronic hardware and components parts and accessories. Notice Type: Notice of Proposed Procurement (NPP) Tendering Procedure: Selective - This procurement has been set aside under the federal government's Procurement Strategy for Indigenous Business (PSIB). Only Indigenous Suppliers that have been invited, qualify to submit a bid. Documents may be submitted in either official language of Canada. Description: The National Research Council of Canada’s – Aerospace Research Centre (NRC-AER) requires the supply of advanced RF and microwave test and measurement instruments to support research, development, testing, and evaluation (RDT&E) activities in the domain of Counter Unmanned Aircraft Systems (C-UAS). These instruments will equip NRC’s specialized Radio Frequency – Electronic Warfare (RF EW) laboratory at the Drone and Flight Autonomy Laboratory (DFAL) at the Centre for Drone Innovation (CDI) in Mirabel, Québec. All the deliverables must be received on or before March 31st 2027. Basis of selection: Lowest Price The National Research Council of Canada (NRC) will award separate contracts for each item to the lowest-priced compliant Indigenous bidder. Tenders must be submitted to the NRC Bid Receiving Unit at: NRC.BidReceiving-ReceptiondesSoumissions.CNRC@nrc-cnrc.gc.ca Procuring Office: Katie Homuth | Senior Contracting Officer Procurement and Contracting Services | Finance and Procurement Services Branch National Research Council Canada | Government of Canada 343-549-4539| Katie.Homuth@nrc-cnrc.gc.ca The NRC has adopted the Integrity Regime administered by Public Services and Procurement Canada. As a result, the integrity provisions are being applied in NRC contracting activities as outlined in this solicitation. Canada will make available Notices of Proposed Procurement (NPP), bid solicitations and related documents for download through the Government Electronic Tendering Service (GETS) at https://canadabuys.canada.ca/en/tender-opportunities . Canada is not responsible and will not assume any liabilities whatsoever for the information found on websites of third parties. In the event an NPP, would be amended, Canada will not be sending notifications. Canada will send all amendments, including significant enquiries received and their replies, to the Invited Bidders. Canada will not be liable for any oversight on the Bidder's part nor for notification services offered by a third party. Indigenous Procurement: The federal Indigenous Business Directory (IBD) is an online resource for all levels of government and the private sector to identify Indigenous business capacity. Having a business profile in the IBD will increase your company’s visibility and may provide additional business. A profile in the IBD can also allow you to compete for federal government contracts that are set-aside for Indigenous businesses through the Procurement Strategy for Indigenous Businesses. For more information and to review eligibility criteria and register, visit: www.canada.ca/indigenousbusinessdirectory