This Solicitation opportunity from Government of Canada was posted on March 19, 2025. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

NPP – RFP212758 – E60HN-16ELEC – E60HN-16ELEC – Stream 1 - EMC/EMI compliance and pre-compliance testers (NCR)

Closed

ISED212758International

Submission Closed04/04/2025, 02:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 334515

New

DIBBS

Supply of Unmounted Magnetic Compasses (NSN 6605-00-553-8795)This subcontract involves the procurement and delivery of 1,914 unmounted magnetic compasses for prime contractors supporting DLA supply contracts. The hardware must strictly adhere to NSN 6605-00-553-8795 specifications and be delivered to New Cumberland. The contract is managed under the Department of Defense for the DLA Weapons Support Nuclear Reactor Program. The supplier is required to provide Safety Data Sheets in accordance with 29 CFR 1910.1200(g) and Federal Standard No. 313. Additionally, the provider must ensure full compliance with the Berry Amendment and the Buy American Act. The solicitation is categorized under NAICS code 334515.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

DEADLINE

Solicitation # SPE7M0-27-T-0860

Solicitation SPE7M0-27-T-0860 is issued by the DLA Weapons Support Maritime Supply Chain ESOC Buys for the procurement of two current sensors, identified as critical application items under NSN 6625015749838. Approved part numbers include 6443292-01M1 from AMZ Alabama Inc. and BAE Systems Tactical Vehicle Systems LP, as well as ASM000560C from Control Solutions LLC. The requirement is not a small business set-aside and falls under NAICS code 334515. Delivery is required within five days after receipt of order, with an original required delivery date of November 3, 2026. The items are to be delivered FOB Origin to the NAVSUP Weapon Systems Support Joint Consolidation Point in Mechanicsburg, Pennsylvania. The contract mandates strict adherence to quality and packaging standards, including MIL-STD-129 for marking and MIL-STD-2073-1E for packaging. Palletization must comply with RP001, and hazardous materials must be handled according to IP025 and 29 CFR 1910.1200. Inspection and acceptance will occur at the point of origin. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and compliance with the Buy American and Balance of Payments Program. The solicitation also incorporates various FAR and DFARS clauses regarding cybersecurity, safeguarding covered defense information, and the prohibition of certain telecommunications equipment.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

INDICATOR, FAULT LOCATI

Solicitation # SPE7M1-27-U-0992

This total small business set-aside solicitation, issued by the DLA Weapons Support Maritime Supply Chain, is for the procurement of 167 fault locating indicators (NSN 6625-01-477-0634). The contract is structured as a unilateral indefinite delivery contract with a maximum value of 350,000 dollars, a guaranteed minimum quantity of 25 units, and a minimum delivery order quantity of 41 units. Due to the nature of the item, manufacturing may require specialized tooling, casting, or forging. The government requires destination inspection and utilizes the Wide Area WorkFlow system for electronic invoicing and payment. The procurement includes stringent technical and quality requirements, including a prohibition on class I ozone depleting chemicals and a ban on additive manufacturing unless specifically authorized. Alternate offerors must provide comprehensive documentation per MIL-T-31000, including all manufacturing drawings, process sheets, and identification of critical process sources. If original equipment manufacturer drawings are unavailable, a detailed engineering analysis report and reverse engineering procedure must be submitted. Compliance with the Buy American Act, the Berry Amendment, and DFARS cybersecurity standards for safeguarding covered defense information is mandatory.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Customized Computerized Gas Dilution System FabricationThis subcontract involves the supply and assembly of a customized Environics Series 4040 Computerized Gas Dilution System for prime contractors supporting Naval Surface Warfare Center projects in Panama City Beach. The scope of work includes integrating multiple dilution-ratio blends, installing mass flow controllers, and fabricating a portable configuration complete with system software. To ensure durability and precision, the system must be constructed using 316L Electropolished Stainless Steel tubing and Viton seals, adhering strictly to both Environics brand specifications and NAVSEA requirements. The project is designated as a total Small Business Set Aside under NAICS code 334515. The final deliverable consists of one fully assembled and configured system. Interested parties should note the response deadline of November 6, 2026, for this Department of Defense requirement.

Naval Surface Warfare Center

POSTED

DEADLINE

Solicitation for Diagnostic Scan Tools W912CH27QA005

Solicitation # W912CH27QA005

Army Contracting Command Detroit Arsenal is soliciting a single award, firm-fixed price contract for the procurement of Diagnostic Scan Tools, specifically manufacturer part number SNA KRSC325MPBO. This opportunity is a total small business set-aside under NAICS code 334515. The government intends to award the contract based on the lowest price to an eligible offeror that meets all material requirements and responsibility criteria. Proposals must be submitted electronically via the Procurement Integrated Enterprise Environment solicitation module by November 30, 2026, at 4:00 PM. The contract requires delivery of the items by December 31, 2026, with a ship-to location in Warren, Michigan, although the place of performance is listed as Jordan. Inspection and acceptance will occur at the point of origin, and the government will cover transportation costs under FOB origin terms. Contractors must comply with strict packaging and marking standards, including MIL-STD-129 for shipment and MIL-STD-130 for unique item identification. Additionally, all wood packaging materials must adhere to ISPM 15 and DOD 4140.65-M standards. Invoicing and payment will be processed electronically through the Wide Area WorkFlow system.

POSTED

DEADLINE

Electrical and Electronic Properties Measuring and Testing Instruments

Solicitation # N6893627Q5001

The Naval Air Warfare Center Weapons Division intends to procure a commercial Radio Frequency record and playback solution to stimulate the electronic warfare systems of EA-18G aircraft in a laboratory environment. The required equipment includes a Rohde and Schwarz IQW Wideband I/Q Recorder, an SMW200A Vector Signal Generator, and all necessary software, licenses, and support. This system is essential for streaming high-speed I/Q data from a government-owned library and converting it back to analog RF data. The government has identified Rohde and Schwarz as the sole source for this acquisition due to the proprietary nature of the existing I/Q data library. Because the critical test data exists exclusively in a proprietary format, the government determined that other solutions involving file translation or conversion would introduce unacceptable risks to data fidelity and project schedules. Interested firms must be registered in the System for Award Management and submit responses to the designated points of contact by November 13, 2026.

Naval Air Warfare Center

POSTED

DEADLINE

Solicitation # SPRMM127QKA51

This solicitation, issued by DLA Mechanicsburg on October 29, 2026, is a Request for Quotation for the manufacture and delivery of four units of the SERVER, AUTOMATIC DA (NSN 7HH 7035-01-718-6394). The procurement is governed by the Lowest Price Technically Acceptable (LPTA) criteria, with award based on the lowest priced offer that meets all technical requirements and complies with the instructions in Section L. The delivery period is specified as 30 days with FOB Destination terms. Key technical requirements include strict adherence to MIL-STD-130 for physical identification and MIL-STD-2073 for preservation and packaging. The material must be new, unused, and completely free of metallic mercury contamination, as it is intended for use on submarines or surface ships. Inspection and acceptance will occur at the origin, specifically at the contractor's or subcontractor's plant. Contractors are required to maintain all inspection records for 365 days following final delivery. Administrative requirements mandate the use of PIEE-WAWF for the electronic submission of combined Invoice and Receiving Reports. Offerors who are not the original manufacturer must provide the Original Equipment Manufacturer's name, CAGE code, and part number. Additionally, the contract requires CMMC Level 1 self-certification and compliance with various FAR and DFARS clauses, including the Buy American program and cybersecurity safeguarding requirements.

SPRMM1 DLA Mechanicsburg

POSTED

DEADLINE

Upgrade X-Ray Controller

Solicitation # C27-003

POSTED

DEADLINE

INDICATOR, FAULT LOCATI

Solicitation # SPE7M1-27-U-0960

Solicitation SPE7M1-27-U-0960 is a small business set-aside issued by the Defense Logistics Agency Weapons Support Maritime Supply Chain for the acquisition of five fault locating indicators, identified by NSN 6625012723597. This procurement is structured as an Indefinite Delivery Contract under the First Destination Transportation program, with delivery required within 384 days after order. The items are designated as critical application items, with specific part numbers associated with Symetrics Industries and Lockheed Martin Corporation. Shipping is established as FOB Origin, while both inspection and acceptance will occur at the destination within the continental United States. The contract mandates strict adherence to the DLA Master List of Technical and Quality Requirements, which takes precedence over ASTM D3951 for non-hazardous commercial packaging. Hazardous materials must comply with FED-STD-313 and TQ requirement IP025, and all packaging must be marked according to MIL-STD-129 and RP001. Administrative requirements include electronic invoicing through the Wide Area WorkFlow system and compliance with various FAR and DFARS clauses, including cybersecurity reporting under 252.204-7012 and prohibitions on certain telecommunications equipment. Evaluation for award is based on the price quoted for the estimated annual demand.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Solicitation # SPE7M1-27-T-1752

This procurement, issued by the DLA Weapons Support Maritime Supply Chain under solicitation SPE7M1-27-T-1752, is for the acquisition of one Regulation and Relief Valve, identified by NSN 6625-01-581-5369. The item is to be delivered FOB Origin to the Naval Air Warfare Center Air Division in Patuxent River, Maryland, with an original required delivery date of October 23, 2026, and a delivery window of 20 days after order. Shipping must be conducted via traceable means, and parcel post is strictly prohibited. Inspection and acceptance will take place at the destination in accordance with FAR 52.246-2. The contract mandates strict adherence to environmental and material standards, prohibiting the use of Class I ozone-depleting chemicals and the intentional addition of mercury or mercury-containing compounds. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirement RP001. Administrative requirements include electronic invoicing through the Wide Area WorkFlow system and compliance with various federal regulations, including the Buy American Act, NIST SP 800-171 for cybersecurity, and DFARS requirements regarding covered defense telecommunications equipment.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Solicitation # SPE7M1-27-T-1744

Solicitation SPE7M1-27-T-1744 is a small business set-aside request for quotations issued by the DLA Weapons Support Maritime Supply Chain for the procurement of nine instrument shunts, identified by NSN 6625-01-492-7560. The items are designated as critical application items and must be delivered FOB Origin to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The required delivery timeline is 97 days after receipt of order, with a need ship date of September 3, 2024, and an original required delivery date of September 14, 2024. Inspection and acceptance will occur at the destination. The contract mandates strict adherence to technical and quality requirements, including DLA packaging requirements (RP001), MIL-STD-2073-1E for packaging, and MIL-STD-129 for marking. Specific restrictions are in place prohibiting the intentional addition of mercury and the use of additive manufacturing processes unless explicitly authorized. Offerors must comply with the Buy American Act, the Berry Amendment, and other domestic material restrictions. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and payment, and all quotes must be submitted via the DLA Internet Bid Board System.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Supply of Accelerometer Part Number 631M24This subcontract involves the procurement and delivery of accelerometer part number 631M24 to support prime contractors operating at the Puget Sound Naval Shipyard and Intermediate Maintenance Facility. The selected provider is responsible for sourcing and delivering the physical hardware components in strict accordance with the original manufacturer specifications. Managed under the Department of Defense for the Puget Sound Naval Shipyard IMF, the work will be performed in Bremerton, Washington. The opportunity is categorized under NAICS code 334515, with a response deadline set for November 6, 2026.

Puget Sound Naval Shipyard IMF

POSTED

1 day ago

DEADLINE

in 8 days

AI Contract Overview

Innovation, Science and Economic Development Canada is seeking a provider to supply equipment and accessories for the Measurement Canada laboratory to verify that electric vehicle supply equipment complies with S-E-EVSE-01 specifications. The required hardware must enable testing for immunity to conducted, differential mode disturbances and signaling within a frequency range of 2 kHz to 150 kHz at alternative current power ports. Specifically, the equipment will be used to test EVSE operating at mains supply voltages up to 280 V and frequencies of 50 Hz or 60 Hz to ensure resilience against disturbances from power line communication systems and power electronics. This solicitation, identified as ISED212758, requires delivery to the National Capital Region. There are no security clearance requirements for the provider, and no trade agreements apply to this process. Interested parties must submit their responses by the deadline of April 4, 2025.

General Info

ISED seeks EVSE testing equipment for Measurement Canada laboratory by April 4, 2025.

Agency

Government of Canada → Innovation, Science and Economic Development Canada

NAICS

334515 - Instrument Manufacturing for Measuring and Testing Electricity and Electrical Signals

Place of Performance

*National Capital Region (NCR), CAN

Set-Aside

NONE

Documents

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedMar 19

Solicitation

Response DeadlineApr 4

Deadline has passed

Submission Closed

04/04/2025, 02:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyGovernment of Canada → Innovation, Science and Economic Development Canada

Contacts1 person available

OfficeN/A

Organization / AgencyGovernment of Canada → Innovation, Science and Economic Development Canada

Office AddressN/A

Contacts

Shabornee DasguptaPoint of Contact

contact@example.gov

+1 (555) 000-0000

Full Description

Measurement Canada (MC) laboratory requires equipment and associated accessories to verify compliance of electric vehicle supply equipment (EVSE) with the requirements in the section 7.6.1.2 and Table 4 of S-E-EVSE-01—Specifications for approval of type of electric vehicle supply equipment. The equipment will allow testing EVSE for immunity to conducted, differential mode disturbances and signaling, in the frequency range 2 kHz to 150 kHz at alternative current (a.c.) power ports. Tests are intended to demonstrate the immunity of EVSE operating at a mains supply voltage up to 280 V (from phase to neutral or phase to earth, if no neutral is used) and a frequency of 50 Hz or 60 Hz when subjected to conducted, differential mode disturbances such as those originating from power electronics and power line communication systems. ADDITIONAL INFORMATION FOR BIDDERS Security Requirements: There is no security clearance level required for the provider. Trade Agreements: No trade agreements are applicable to this solicitation process. Location of Delivery: Region: National Capital Region

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS