Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

NRP, PIN, RETAINING

Active
SPE4A6-26-T-11LBFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract covers the procurement of two units of NRP, PIN, RETAINING with NSN 5315-01-604-0951, issued under solicitation SPE4A6-26-T-11LB by the Department of Defense’s ASC Commodities Division. The item must be uniquely identified with an Item Unique Identification (IUID) compliant with MIL-STD-130 and governed by the DFARS 252.211-7003 clause. The supplier is required to comply with CMMC Level 2 cybersecurity self-assessment standards and adhere to DLA’s technical and quality requirements as outlined in the DLA Master List, including packaging standards per MIL-STD-2073-1E and marking per MIL-STD-129. No mercury or mercury compounds are allowed in preservation, packaging, or marking. The item must be delivered FOB origin in 20 days with zero quantity variance and inspected and accepted at destination. Packaging must follow DLA’s specific requirements, including palletization, preservation methods, and container specifications, and must not use parcel post. Shipment must be sent via the fastest traceable means to the receiving officer at Silverdale, WA, with a required delivery date of July 28, 2026. The contract mandates configuration change management procedures, includes provisions for variance requests, and requires removal of government identification from non-accepted supplies.

General Info

Procure two NRP units with IUID, CMMC Level 2, DLA standards, FOB origin, deliver by July 28, 2026, no mercury, traceable shipping.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

332618 - Other Fabricated Wire Product ManufacturingView NAICS

Place of Performance

7000 FINBACK CIRCLE, SILVERDALE, WA, 98315-7000, US

Set-Aside

NONE

Documents

(1)

SPE4A6-26-T-11LB.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS
Contacts
Katelyn Williams
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
NRP,PIN,RETAINING
NRP,PIN,RETAINING
This item requires Item Unique Identification (IUID) in accordance with the enclosed/referenced IUID technical requirements and MIL-STD-130. DFARS 252.211-7003 clause applies.
This item requires Item Unique Identification (IUID) in accordance with the enclosed/referenced IUID technical requirements and MIL-STD-130. DFARS 252.211-7003 clause applies. RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD002, COVERED DEFENSE INFORMATION APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
This item requires Item Unique Identification (IUID) in accordance with the enclosed/referenced IUID technical requirements and MIL-STD-130. DFARS 252.211-7003 clause applies.
NORTHROP GRUMMAN SYSTEMS CORPORATION 03956 P/N 4500554-1
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
SPE4A6-26-T-11LB
SECTION B
PR: 7017673512 PRLI: 0001 CONT’D
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017673512 0001 EA 2.000
NSN/MATERIAL:5315016040951
DELIVERY (IN DAYS):0020
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:BL OPI:M
INTRMDTE CONT:ED INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
IP056: MERCURY OR MERCURY COMPOUNDS ARE PROHIBITED IN PRESERVATION,
PACKAGING, PACKING AND MARKING.
PARCEL POST ADDRESS:
N68438
NAVIMFAC PACNORWEST
7000 FINBACK CIRCLE
SILVERDALE WA 98315-7000
US
RDD 777 SHIPMENT. SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
N68438
RECEIVING OFFICER
BUILDING 7000 DOOR 12
7000 FINBACK CIRCLE
SILVERDALE WA 98315
US
M/F: (TCN) N684386204DB39
RDD: 777
PROJ: FY9 TP 2
SUPP ADD: 6VMJ47 SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 06
DIC: A4A DIST: E3B ADV: 5S FC: F3
Need Ship Date:00/00/0000
SPE4A6-26-T-11LB
SECTION B
PR: 7017673512 PRLI: 0001 CONT’D
Original Required Delivery Date:07/28/2026
SPE4A6-26-T-11LB NSN/Part Number: 5315-01-604-0951 Quantity: 2 EA Purchase Request: 7017673512QTY: 2 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332618
New
DIBBS
PIN, GROOVED, HEADED
Solicitation # SPE4A6-26-T-11KQ
The contract is for the procurement of 14 units of a grooved, headed pin with NSN 5315-12-373-8325 under solicitation SPE4A6-26-T-11KQ, issued by the Department of Defense’s ASC Commodity Division. The item is classified as a critical application component sourced from Heckler Koch GmbH DBA Heckler, and delivery is required within 178 days to the receiving warehouse in Tracy, California. All supplies must comply with DLA packaging standards including MIL-STD-2073-1E and MIL-STD-129 for marking, with no special marking required. The unit of issue is each, priced at $14.00 per unit, with zero variance allowed in quantity. Inspection and acceptance occur at the destination point. Sampling for quality assurance must follow MIL-STD-1916, ASQ H1331 Table 1, or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Zero non-conformances are required in the sample lot unless otherwise stated. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the version in effect on the solicitation issue date controlling for simplified acquisitions. Documentation for source approval is required under RC001. Transportation and shipping instructions are governed by DLAD Proc Notes C19 and C20, and the contract mandates strict adherence to packaging, marking, and palletization guidelines as defined by DLA. The original required delivery date is February 6, 2027.
ASC COMMODITIES DIVISION

POSTED

about 9 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332618
New
DIBBS
PIN, TAPERED, PLAIN
Solicitation # SPE7M2-26-Q-0710
The contract is for a single tapered plain pin with NSN 5315-01-723-0297, procured under solicitation SPE7M2-26-Q-0710 by the Department of Defense's Nuclear Reactor Program. Delivery is required within 150 days after award, with a response deadline of August 17, 2026, and the place of performance is specified as New Cumberland, PA, 17070-5002. The technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue or award date depending on acquisition size. Packaging must comply with DLA standards, and government identification must be removed from any non-accepted supplies. The item involves controlled technical data subject to ITAR or EAR, mandating strict export controls—including restrictions on disclosure to foreign persons regardless of location—and requires contractors to hold JCP certification, complete required DOD export training, and receive explicit DLA authorization to access the data. Configuration changes require formal engineering change proposals and variance requests, and the contract enforces DFARS 252.225-7048 for covered defense information. The primary point of contact is Tiffany Scott, with direct email and phone provided for inquiries.
NUCLEAR REACTOR PROGRAM

POSTED

about 9 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332618
New
DIBBS
PIN, DRIVE, GUIDED
Solicitation # SPE4A6-26-T-11KF
The contract pertains to the procurement of a single unit of a source-controlled item identified by NSN 5315-01-684-8712 and part number 941089-1, titled PIN, DRIVE, GUIDED, under solicitation SPE4A6-26-T-11KF. The item must be manufactured and tested in accordance with limited rights data accessible only to approved vendors, and suppliers must demonstrate traceability to authorized sources; source approval requires submission of a SAR package. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with sampling strictly following MIL-STD-1916 or equivalent zero-based plans, requiring zero non-conformances unless otherwise specified, and assigning verification levels of VII, IV, and II for critical, major, and minor attributes respectively. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, with no special marking required, and palletization must meet DLA packaging standards. The item is to be delivered FOB origin within ten days of contract award, with inspection and acceptance occurring at the destination. The delivery address is the US Army SSA Bulgaria ASG at Novo Selo Training Area, Mokren, Bulgaria, with shipment governed by DLADProc Notes C19 and C20. The required delivery date is July 28, 2026, and the contract specifies a zero variance in quantity with no allowed overages or underages.
ASC COMMODITIES DIVISION

POSTED

about 9 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332618
New
DIBBS
CHAIN ASSEMBLY, SINGLE
Solicitation # SPE4A5-26-T-320A
The contract pertains to the procurement of a Chain Assembly, Single Leg, identified by NSN 4010-01-654-0632 and part number SC3837 from Brothers Body and Equipment, LLC, with a total quantity of 14 units. The item is classified as a Commercial Off the Shelf (COTS) product with no shelf life requirement, and Item Unique Identification is not mandated per the Service customer’s request, with DFARS 252.211-7003(c)(1)(i) applicable. Technical and quality standards are governed by the DLA Master List of Technical and Quality Requirements, which supersede other specifications such as ASTM D3951. Packaging must comply with MIL-STD-129 for marking and labeling and adhere to DLA Packaging Requirements for Procurement, including palletization standards. The unit of issue is each (EA), with a fixed quantity and zero variance allowed. Delivery is FOB origin with inspection and acceptance occurring at destination, and fulfillment is required within 81 days from contract award, with the original delivery date set for July 23, 2026. All materials must be delivered to the designated DLA Distribution facility in New Cumberland, Pennsylvania, as specified in the parcel post and shipping addresses. Transportation protocols are governed by DLAD Proc Note C19 and C20. The solicitation number is SPE4A5-26-T-320A, issued under NAICS code 332618 by the Department of Defense’s ASC Supplier Oper OEM Division, with Hien-Van Trinh as the primary point of contact.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 9 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332618
New
DIBBS
PIN, STRAIGHT, HEADLE
Solicitation # SPE4A6-26-T-11KB
The contract pertains to the procurement of one unit of a PIN, STRAIGHT, HEADLE with NSN 5315-01-696-9185 under solicitation SPE4A6-26-T-11KB, with a response deadline of August 11, 2026, and a required delivery within 20 days of award. Technical and quality requirements referenced in the document are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for larger ones, unless a later amendment supersedes it. Packaging must comply with DLA standards, and any non-accepted supplies must have government identification removed prior to return. The item is subject to export control under ITAR or EAR, meaning any disclosure of its technical data to foreign persons—even within the U.S.—requires prior authorization from the Department of State or Commerce, and DFARS 252.225-7048 applies. Access to this controlled data is restricted to contractors with approved US/Canada Joint Certification Program status, completion of mandatory DLA training on export-controlled data handling, and formal approval from the DLA controlling authority. Covered Defense Information requirements also apply. The purchase request number is 7017673430, the place of performance is Mechanicsburg, Pennsylvania, 17050-2411, and the primary point of contact is Ericka Mosley at the Defense Logistics Agency.
ASC COMMODITIES DIVISION

POSTED

about 9 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332618
New
DIBBS
WIRE ROPE ASSEMBLY,
Solicitation # SPE4A5-26-T-319Y
This contract pertains to the procurement of a single-leg wire rope assembly identified by NSN 4010-01-526-3072 and part number 3308T55 from McMaster-Carr Supply Co., classified as a commercial off-the-shelf item. The requirement is for three units to be delivered FOB origin with zero tolerance for quantity variance, and delivery must be completed within 163 days from the contract date, targeting January 22, 2027. All packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, including marking per MIL-STD-129 without special markings, and palletization in accordance with DLA standards. The item is subject to multiple DLA technical and quality requirements referenced by R and I numbers, including FAA airworthiness approval, bare item marking, and supply chain traceability documentation retention as defined in DLAD Procurement Note C03. Sampling must adhere to MIL-STD-1916 or ASQ H1331 with zero non-conformances expected unless otherwise stated, and verification levels are tied to critical, major, and minor attributes. The delivery destination is the DLA Distribution facility in New Cumberland, Pennsylvania, with transportation governed by DLAD Procurement Notes C19 and C20. Contract data requirements include compliance with covered defense information provisions, though unique item identification is not required. The solicitation number is SPE4A5-26-T-319Y, originally posted on August 3, 2026, with a response deadline of August 11, 2026, and the contracting office is under the Department of Defense’s ASC Supplier Oper OEM Division.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 9 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332618
New
DIBBS
PIN, COTTER
Solicitation # SPE4A6-26-T-11KJ
The contract pertains to the procurement of one unit of a PIN, COTTER with NSN 5315-01-657-7490, sourced from CAGE code 1NWY2 and part number CC-0009821, under solicitation SPE4A6-26-T-11KJ. Delivery is required within 20 days of contract award, with FOB origin terms, and both inspection and acceptance occur at the destination. The item must be packaged in strict compliance with MIL-STD-2073-1E, including specific preservation methods, packaging codes, and unit container types, with marking governed by MIL-STD-129 and no special markings required. Palletization must adhere to DLA’s packaging requirements, and the shipment must be sent via the fastest traceable means, excluding parcel post, to the delivery address at Fort Hood, Texas. Sampling and quality verification follow MIL-STD-1916 or ASQ H1331 standards with zero non-conformances mandated unless otherwise stated, with unspecified attributes treated as major. Technical and quality requirements are incorporated by reference from the DLA Master List, and the DoD unit of issue is enforced. The sole delivery quantity is one unit priced at $1.00, with no variance permitted, and the original required delivery date is July 28, 2026. Government use identification is restricted, and non-accepted supplies must have government identifiers removed. All data is subject to DLA’s official documentation and compliance protocols.
ASC COMMODITIES DIVISION

POSTED

about 9 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332618
New
DIBBS
Precision Machining & Bearing Staking Tool FabricationThe contract calls for the manufacture of 30 precision bearing staking installation tools in strict accordance with military specifications, requiring advanced metal stamping, intricate machining, and detailed assembly processes. Each tool must meet exacting quality and performance standards expected for defense applications, ensuring reliability and consistency under demanding operational conditions. The production must be executed using proven industrial techniques and materials capable of maintaining dimensional accuracy and structural integrity throughout the tool’s lifecycle. This is a total small business set-aside under the SBA program, exclusively available to small businesses as defined by federal guidelines, with the NAICS code 332618 indicating metal stamping and custom fabrication. The place of performance is designated as New Cumberland, Pennsylvania, with a zip code of 17070-5002, and the contract is managed by the ASC Commodities Division of the Department of Defense. The solicitation was posted on August 2, 2026, with responses due by August 10, 2026, and the contract type is designated as a subcontract, meaning it will be awarded under a prime contractual arrangement. Interested parties must respond through the official DIBBS platform at the provided link before the deadline to be considered.
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 332618
New
DIBBS
Precision Fastener Manufacturing – Straight-Headed PinsThe contract calls for the manufacture and delivery of two straight-headed pins designated by NSN 5315-01-648-4914, with strict adherence to Department of Defense technical and quality standards to ensure compatibility and performance in mechanical assemblies. The work must be performed in compliance with DLA specifications, emphasizing precision, material integrity, and dimensional accuracy to meet military-grade requirements. Delivery is expected to support operational readiness and maintenance of defense equipment, with the place of performance designated as Barstow, California, 92311-5015. This is a subcontract opportunity under NAICS code 332618, posted on August 2, 2026, with responses due by August 13, 2026. It is managed by the Land Supply Chain under the Department of Defense and is accessible via the DIBBS platform. There is no set-aside designation, and the solicitation is open to qualified subcontractors capable of fulfilling the exacting production and delivery criteria. All materials and processes must align with the technical specifications governing the NSN, ensuring the pins meet the rigorous demands of defense applications.
LAND SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 332618
New
DIBBS
PIN, STRAIGHT, HEADED
Solicitation # SPE7L1-26-T-905A
The contract pertains to the procurement of two straight-headed pins with NSN 5315-01-648-4914 under solicitation SPE7L1-26-T-905A, issued by the Department of Defense’s Land Supply Chain through the Defense Logistics Agency. Delivery is required within five days of award, with performance located in Barstow, California, 92311-5015. The item is subject to technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, and the contract incorporates mandatory compliance with export control regulations under ITAR or EAR, prohibiting unauthorized disclosure or export of technical data to foreign persons anywhere in the world. Contractors must hold an approved US/Canada Joint Certification Program certification, complete DLA-mandated training on handling export-controlled data, and pass the DLA Export-Controlled Technical Data Questionnaire to access such information. The solicitation requires CMMC Level 2 certification for any third-party assessment organization involved, and all responses must be submitted by August 13, 2026. Point of contact is Kristina Derry, with the solicitation available via the DIBBS portal and governed by DFARS 252.225-7048 for export controls.
LAND SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 332618
New
DIBBS
PIN, RETAINING
Solicitation # SPE4A6-26-T-11CQ
The contract pertains to the procurement of one unit of a PIN, RETAINING with NSN 5315-58-002-1217 and part number MUHLD148-831 from HIAB USA INC, issued under solicitation SPE4A6-26-T-11CQ. Delivery is required within 10 days FOB origin to the US Army SSA SUSBDE APS 405TH AFSB at Leutsestraat 34, Zutendaal 3690, Belgium, with inspection and acceptance occurring at the destination. The item is to be packaged in strict compliance with MIL-STD-2073-1E and marked according to MIL-STD-129, with no special marking required. Packaging and palletization must adhere to DLA’s standardized requirements, and the unit of issue is EA. Sampling and inspection are governed by MIL-STD-1916 or ASQ H1331, with zero non-conformances mandated in the sample unless otherwise specified, and attributes must be classified with verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 for critical, major, and minor characteristics respectively. Item Unique Identification is not required per service customer direction, and DFARS 252.211-7003(c)(1)(i) applies. Technical and quality requirements referenced by R or I numbers are incorporated via the DLA Master List, and the revision in effect at the solicitation issue date governs. The required delivery date is June 25, 2026, with no variance allowed in quantity. Transportation and shipping details align with DLAD Proc Notes C19 and C20, and the contract designates W51109 as the RDD and freight address, with government use codes and project identifiers included for tracking.
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 332618
New
DIBBS
PIN, STRAIGHT, HEADED
Solicitation # SPE7L5-26-T-4725
The contract pertains to the procurement of 7 straight-headed pins identified by NSN 5315-01-546-9412 and part number 00085140708, supplied by Fairbanks Morse, LLC, under solicitation SPE7L5-26-T-4725. Delivery is required within 173 days, with shipment FOB origin and final inspection and acceptance occurring at the destination facility in New Cumberland, Pennsylvania. The items must comply with MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, with no special marking required and no use of mercury or mercury compounds in preservation, packaging, or marking. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances accepted unless otherwise stated, and critical attributes are assigned verification levels VII, IV, and II corresponding to AQLs of 0.1, 1.0, and 4.0. The contract incorporates technical and quality requirements from the DLA Master List, and documentation for source approval must meet RC001 standards. Mercury-containing components are prohibited except in specific instances such as batteries, fluorescent lights, sensors, weapon systems, or chemical reagents specified by NAVSEA, and any such devices must include a secondary containment. The items are subject to a zero variance in quantity and must be palletized per DLA packaging requirements. The point of contact for inquiries is Christopher Walker, and the solicitation closed on August 10, 2026, with a required delivery date of January 31, 2027.
LAND SUPPLIER OPNS ENGINES

POSTED

1 day ago

DEADLINE

in 7 days
View Details

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 541611
New
DIBBS
Traceability Documentation and DART Database SubmissionThe contract requires the maintenance and submission of complete traceability records for airworthiness parts through the DLA Automated Records Traceability DART database, ensuring full accountability from manufacturing through to final use. This includes the accurate uploading of manufacturer information, lot-level traceability data, and all relevant test results to meet stringent defense aviation standards. The obligation extends to timely and error-free documentation to support regulatory compliance and operational readiness across the Department of Defense supply chain. This subcontract is issued under NAICS code 541611 and is active with a response deadline of August 17 2026 and a posted date of August 3 2026. It is managed by the ASC Commodities Division under the Department of Defense and requires strict adherence to DART protocols without reliance on external or paperbased systems. There is no designated set aside classification and no specific performance location listed indicating the work may be performed remotely or at any qualifying facility meeting federal traceability requirements. Failure to comply with data submission timelines or accuracy standards will result in contract noncompliance.
Administrative Management and General Management Consulting Services

POSTED

about 9 hours ago

DEADLINE

in 14 days
View Details
NAICS: 541512
New
DIBBS
Cybersecurity and CUI Compliance (CMMC Level 2)The contract requires implementation and self-assessment for CMMC Level 2 compliance to safeguard Controlled Unclassified Information related to design, manufacturing, and testing data. It applies specifically to systems that handle technical data and traceability records, ensuring that appropriate security controls are in place to protect sensitive information from unauthorized access, disclosure, or compromise. The contractor must align with the CMMC framework’s requirements to achieve and maintain compliance, which includes documenting policies, conducting internal assessments, and demonstrating readiness for potential audits. This is a subcontract under the Department of Defense, managed by the ASC Commodities Division, with a NAICS code of 541512 indicating information technology services. The solicitation was posted on August 3, 2026, and responses are due by August 17, 2026. The performance location is not specified, and there is no set-aside designation. The contract is accessible via a public DIBBS portal, and while a point of contact is not provided, responsible parties are expected to adhere to all CMMC Level 2 controls and maintain ongoing compliance throughout the contract lifecycle.
Computer Systems Design Services

POSTED

about 9 hours ago

DEADLINE

in 14 days
View Details
NAICS: 493190
New
DIBBS
MIL-STD-2073-1E and MIL-STD-129 Packaging and MarkingAll units must be packaged and marked in full compliance with MIL-STD-2073-1E and MIL-STD-129, encompassing detailed preservation methods designated as PRES MTHD: 10, and requiring accurate lot and serial number labeling, CAGE code marking, and barcoding for traceability and inventory management. Palletization must adhere to DLA RP001 specifications to ensure uniformity, stability, and readiness for handling and transport within the Department of Defense logistics network. This subcontract is issued under NAICS code 493190 by the ASC Commodities Division of the Department of Defense, with responses due by August 17, 2026, and performance expected to support military supply chain requirements regardless of specific geographic location.
Other Warehousing and Storage

POSTED

about 9 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332722
New
DIBBS
First Article Testing (FAT) and Government Test Unit ProductionThe contract requires the production and submission of government test units under CLIN 0002 and CLIN 0003 for First Article Testing, with full documentation including a comprehensive FAT report, inspection at the manufacturing origin, and delivery within specified timeframes of 210 and 296 days ADO respectively. The effort is part of a subcontract under the Department of Defense’s ASC Commodities Division, with a NAICS code of 332722 indicating precision instrument manufacturing, and is focused on delivering qualified test units that meet rigorous government technical and procedural standards. The timeline is tightly defined, and the requirement for complete documentation and on-site inspection ensures traceability and compliance before acceptance. The solicitation, posted on August 3, 2026, has a response deadline of August 17, 2026, and is accessible via the DIBBS platform. Although no set-aside type or specific point of contact is provided, the place of performance and organization details indicate this is a federal defense procurement with expectations for full adherence to military quality assurance protocols. Participation requires the ability to manage complex production timelines, document every stage of manufacturing and testing, and coordinate with government inspection teams to validate conformance prior to final delivery.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 9 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332722
New
DIBBS
Precision Machining of Critical Safety BoltsThe contract mandates the manufacture of 271 precision machine bolts designated by NSN 5306-01-564-3371, engineered to meet strict technical standards, with specific attention to correcting a weight discrepancy found on part number 70400-38159 for MP-35N material. The scope of work encompasses the full production cycle including sourcing of approved materials, precision machining, heat treatment processes, and comprehensive quality verification to ensure compliance with safety and performance requirements. All components must be produced under rigorous quality control protocols to maintain dimensional accuracy and material integrity critical to their function. This subcontract, issued under NAICS code 332722 by the ASC Commodities Division of the Department of Defense, is posted for bid with a response deadline of August 17, 2026. The work is tied to a defense-related production need, emphasizing reliability and adherence to military specifications. While details on delivery location and point of contact are not provided, the place of performance and contracting entity indicate that the finished bolts are intended for use in mission-critical defense systems, requiring full traceability and certification throughout the manufacturing process.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 9 hours ago

DEADLINE

in 14 days
View Details
NAICS: 541611
New
DIBBS
Commercial Item Subcontract ManagementThe contract titled Commercial Item Subcontract Management requires the successful offeror to oversee and manage subcontracts for commercial products in full compliance with Federal Acquisition Regulation 52.244-6 and Defense Federal Acquisition Regulation Supplement 252.244-7000. This includes the accurate and complete flow-down of all applicable clauses to subcontractors and ensuring that small business participation is properly integrated throughout the supply chain in alignment with the stated set-aside requirements. All subcontracting activities must adhere to the standards established for commercial item acquisition while maintaining rigorous documentation and oversight to demonstrate compliance. This solicitation is designated as a Total Small Business Set-Aside under FAR 19.5, meaning only small businesses are eligible to compete, and the North American Industry Classification System code 541611 applies, indicating the work involves management, scientific, and technical consulting services. The contracting activity is under the ASC Commodities Division of the Department of Defense, and responses must be submitted by August 13, 2026. The contract is intended to support commercial item procurement efforts with a strong emphasis on fostering small business involvement across all levels of subcontracting.
Administrative Management and General Management Consulting Services

POSTED

about 9 hours ago

DEADLINE

in 10 days
View Details
NAICS: 541511
New
DIBBS
Cybersecurity and Covered Defense Information SafeguardingThis contract requires the implementation and maintenance of cybersecurity controls aligned with NIST SP 800-171 to protect covered defense information as mandated by DFARS 252.204-7012, ensuring compliance with federal security standards for sensitive defense data. The work is classified as a subcontract under a Total Small Business Set-Aside, exclusively available to small businesses as defined by the SBA, and is governed by the NAICS code 541511, which pertains to custom computer programming services. The contract is administered by the ASC Commodities Division within the Department of Defense and places no specified location for performance, indicating flexibility in execution as long as compliance obligations are met. Respondents must submit proposals by the deadline of August 13, 2026, with the solicitation posted on August 3, 2026, through the DIBBS platform. Although no point of contact or physical performance location is provided, the expectation is for contractors to establish and sustain a verifiable, auditable cybersecurity posture throughout the contract period. The emphasis is on continuous compliance with NIST controls to safeguard covered defense information, and failure to maintain these standards could result in contract termination or penalization under applicable defense acquisition regulations.
Custom Computer Programming Services

POSTED

about 9 hours ago

DEADLINE

in 10 days
View Details
NAICS: 541512
New
DIBBS
Electronic Invoicing and WAWF Compliance SupportThis contract requires the preparation and submission of electronic invoices through the Wide Area Workflow system with full compliance to Federal Acquisition Regulation clauses and seamless integration support to ensure accurate and timely processing. The work must be performed under a Total Small Business Set-Aside, meaning only small businesses certified by the Small Business Administration are eligible to bid, and the North American Industry Classification System code 541512 indicates the scope centers on computer systems design services, specifically within the realm of invoicing and financial data systems. The opportunity was posted on August 3, 2026, with submissions due by August 13, 2026, and is issued under the ASC Commodities Division of the Department of Defense, where performance is expected to align with federal electronic invoicing standards and system requirements, regardless of a specified physical location. All bidders must demonstrate proven capability in WAWF integration, proper FAR clause representation, and the technical infrastructure to handle secure, compliant electronic invoicing for government contracts.
Computer Systems Design Services

POSTED

about 9 hours ago

DEADLINE

in 10 days
View Details
NAICS: 541380
New
DIBBS
Military-Grade Inspection and Acceptance ServicesThe contract requires comprehensive origin-based inspection and acceptance testing for critical components, strictly adhering to MIL-STD-1916 or ASQ Z1.4 standards with an AQL of 0.1 for critical defects, ensuring the highest level of quality control. Full traceable reporting must be maintained throughout the process, documenting every inspection step and result with complete accountability and data integrity. This work is classified as a subcontract under a Total Small Business Set-Aside, meaning only small businesses certified by the SBA are eligible to respond, reinforcing the government’s commitment to supporting small business participation in defense contracting. The procurement falls under NAICS code 541380, indicating technical and scientific consulting services, and is managed by the ASC Commodities Division of the Department of Defense. The solicitation was posted on August 3, 2026, with a firm response deadline of August 13, 2026, leaving a ten-day window for qualified small businesses to submit proposals. Although the place of performance and point of contact details are unspecified, the contract is accessible via the DIBBS portal, and performance expectations center on precision testing and documentation to meet military-grade quality requirements without deviation.
Testing Laboratories and Services

POSTED

about 9 hours ago

DEADLINE

in 10 days
View Details
NAICS: 322291
New
DIBBS
Defense Logistics Agency (DLA) Compliance Packaging and Preservation ProviderThe contract requires a small business to provide full packaging, preservation, and labeling services that meet military standards, specifically MIL-STD compliance, with an emphasis on mercury-free methods for environmental and safety compliance. All work must adhere to Defense Logistics Agency requirements, including the application of barcoding and precise container marking to ensure traceability and logistical efficiency across the supply chain. Services must be performed under a Total Small Business Set-Aside, restricting eligibility exclusively to small businesses certified by the SBA, and is classified under NAICS code 322291, which pertains to other paper product manufacturing. The solicitation is issued by the ASC Commodities Division within the Department of Defense and is open for response until August 13, 2026, with a posting date of August 3, 2026. Performance location details are unspecified, but all work must satisfy federal defense logistics standards without exception.
Sanitary Paper Product Manufacturing

POSTED

about 9 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334511
New
DIBBS
Qualified Product/Manufacturer Sourcing AgentThe contract seeks a qualified small business to source defense-compliant electronic components in accordance with MIL-DTL-24779D specifications and H02 clause requirements, ensuring all products originate exclusively from manufacturers or suppliers listed on the Qualified Products List or Qualified Manufacturers List. The role involves identifying, vetting, and procuring components that meet stringent military standards, with the expectation that all sourcing activities adhere to the technical and compliance frameworks established by the Department of Defense. The effort is classified as a total small business set-aside under FAR 19.5, restricting eligibility exclusively to small businesses as defined by the SBA, with the NAICS code 334511 indicating the industry focus on electronic component manufacturing. The solicitation, issued by the ASC Commodities Division under the Department of Defense, requires full responsiveness to the referenced specifications and compliance with all associated military standards. Responses are due by August 13, 2026, and the contract will be executed as a subcontract. While no point of contact or physical performance location is provided, the work is expected to support defense electronics supply chains through rigorous supplier qualification and component sourcing processes. All activities must ensure traceability, authenticity, and regulatory alignment with current DoD procurement guidelines.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 9 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, HEXAGON H
Solicitation # SPE4A6-26-T-11KT
The contract is for 11 units of a hexagon cap screw identified by NSN 5305-01-710-8361, with a delivery requirement of 100 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for larger procurements, unless amended. Packaging must comply with DLA standards, and any non-accepted supplies must have government identification removed. Sampling procedures must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated; critical, major, and minor attributes are verified at levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. The item contains technical data subject to export controls under ITAR or EAR, requiring prior authorization for any export or disclosure to foreign persons, whether in the U.S. or abroad, and DFARS 252.225-7048 applies. Access to this controlled data is restricted to DLA contractors with approved US/Canada Joint Certification Program certification, completed DOD export control training, and prior DLA authorization. The solicitation number is SPE4A6-26-T-11KT, issued on August 3, 2026, with responses due by August 11, 2026, under NAICS code 332722, and performance is to occur in Tracy, California, with primary point of contact Molitauoleava Langi.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 9 hours ago

DEADLINE

in 8 days
View Details