Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

NSF 26-510 | Power Management — Power Electronics Circuits and Control Systems

Active

nsf-seedfund-PM-PM5_STTRSBIR / STTR

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The National Science Foundation is soliciting proposals under the Power Management topic, specifically focusing on Power Electronics Circuits and Control Systems. This initiative seeks the development of novel technologies for power and thermal management, spanning a range of applications from device-scale breakthroughs and embedded systems to standalone or grid-scale technologies. This opportunity is issued as a total small business set-aside under the SBIR/STTR mandate, restricting eligibility to organizations with fewer than 500 employees. Interested parties can find further details through the NSF Seed Fund portal under solicitation number nsf-seedfund-PM-PM5_STTR.

General Info

NSF seeks small business proposals for power electronics and thermal management technology development.

Agency

National Science Foundation

NAICS

334418 - Printed Circuit Assembly (Electronic Assembly) Manufacturing

Place of Performance

Not specified

Set-Aside

SBA

Documents

0

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseSolicitation

PostedMay 22

Solicitation

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyNational Science Foundation

ContactsNo contacts available

OfficeUSA

Organization / AgencyNational Science Foundation

Office AddressUSA

ContactsNo contact information available

Full Description

Show more

The Power Management topic address the development of novel technologies that enable new power and thermal management solutions. Innovations supported could range from device-scale breakthroughs to embedded or standalone systems or grid-scale technologies.
## Subtopic: Power Electronics Circuits and Control Systems

Similar Contracts

Same NAICS industry code

Printed Wiring Board Fabrication and AssemblyThis subcontract involves the fabrication and assembly of three Printed Wiring Boards, specifically part number 285T0458-203, for Department of the Air Force projects managed by the Ok DLA Aviation At Oklahoma City. The selected contractor is responsible for the new manufacture, procurement, and integration of all component parts in strict accordance with the Engineering Data List. To ensure quality and compliance, the contractor must adhere to MQR-PSD-1 standards and possess the capability to support a Source Approval Request package. The project is categorized under NAICS code 334418, with a response deadline set for November 20, 2026.

Ok DLA Aviation At Oklahoma City

POSTED

about 12 hours ago

DEADLINE

in about 1 month

Radar Transmitter Component and Parts SupplyThe Radar Transmitter Component and Parts Supply subcontract involves providing high-precision electronic components, sub-assemblies, and replacement parts to prime contractors supporting the USAF 448th Supply Chain Management Wing. Operating under NAICS code 334418 for the Department of Defense, the provider must source parts by National Stock Number and Part Number while strictly adhering to AS5553 standards to ensure authenticity and prevent the introduction of counterfeit components. All deliverables must be marked in accordance with MIL-STD-130 and MIL-STD-129 and must follow all applicable Special Packaging Instructions. The primary objective of the contract is the delivery of certified authentic replacement components to maintain the operational integrity of radar transmitter systems.

FA8250 Afsc Pzaaa

POSTED

about 12 hours ago

DEADLINE

PCBA Teardown, Repair, and RFI RestorationThis subcontract for the Department of the Navy's Navsup Weapon Systems Support involves the teardown, evaluation, repair, overhaul, and modification of flight-critical Printed Board Assemblies. The selected contractor will be responsible for disassembling, cleaning, inspecting, and replacing components in accordance with TDP VER 001 and REF NR 8430022-502 to deliver eight Ready for Issue board assemblies. Work will be performed in Philadelphia and requires the use of precision soldering tools and diagnostic equipment. To be eligible, the contractor must be a Government-approved source holding either ISO 9001 or AS9100 certification. The project falls under NAICS code 334418, with a response deadline set for October 30, 2026.

Navsup Weapon Systems Support

POSTED

about 20 hours ago

DEADLINE

NRP,PRINTE DBRD ASS — 5998016636129 — N0038327QSA01

Solicitation # N0038327QSA01

Solicitation N00383-27-Q-SA01, issued by NAVSUP Weapon Systems Support, is a small business set-aside for the teardown, evaluation, repair, overhaul, and modification of eight NRP Printed Board Assemblies (NSN 5998-01-663-6129, Part Number 8430022-502). The primary objective is to return these units to a Ready for Issue (RFI) condition within a 90-day delivery period. The work is to be performed at the CAES Systems LLC facility in Lansdale, Pennsylvania, and will be issued as a delivery order under BOA N00383-25-G-NP01. The contractor is responsible for providing all necessary labor, materials, and tooling, with strict prohibitions against part cannibalization unless specifically approved. The contract mandates adherence to ISO 9001 or SAE AS9100 quality systems and ANSI/NCSL Z540.3 or ISO-10012-1 calibration standards. Key administrative requirements include mandatory reporting via the Commercial Asset Visibility Repairables Portal and strict packaging compliance with MIL-STD-2073 and MIL-STD-129. The government will award the contract to a single responsible offeror based on a best-value determination, prioritizing past performance over price. Special provisions are included for Beyond Economical Repair (BER) determinations, Missing on Induction (MOI) components, and Over and Above Repair (OAR) efforts, all of which require written concurrence from DCMA and the Procuring Contracting Officer.

Navsup Weapon Systems Support

POSTED

about 20 hours ago

DEADLINE

Special Purpose Electrical Cable Assembly ManufacturerThis subcontract involves the manufacture and supply of special-purpose electrical cable assemblies for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The contractor is responsible for fabricating assemblies according to NSN 6150-01-564-6021 specifications, utilizing a specific technical data package that dictates the required wire gauges, connectors, and shielding. To ensure all technical requirements are met, the contractor must perform Contractor First Article Testing and complete a full inspection before delivery. The work is categorized under NAICS code 334418 and is to be performed in New Cumberland, Pennsylvania. The response deadline for this opportunity is October 27, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supply of Blind Rivets (NSN 5320015935151)This subcontract involves the supply of 184 units of blind rivets for prime contractors working on DLA Weapons Support ASC projects. The contractor is responsible for sourcing or manufacturing rivets that strictly adhere to NSN 5320015935151 specifications. Performance of the contract requires strict adherence to RP001 DLA Packaging Requirements and inspection protocols outlined in RQ009. To be eligible, the provider must comply with RQ001 Higher Level Quality Requirements and maintain active registration in AMPS/VSM. The project is managed under the Department of Defense through the DLA Weapons Support ASC Supplier Oper OEM Division, with the place of performance located in New Cumberland.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Supply of Alto-Shaam Part FI-26383This subcontract involves the procurement and delivery of 21 units of Alto-Shaam Part Number FI-26383 to support prime contractors on DLA Land and Maritime projects. The work is managed under the Department of Defense for the DDSP New Cumberland Facility, with performance taking place in New Cumberland, Pennsylvania. The contractor is required to adhere to strict military standards for packaging, marking, and palletization, specifically MIL-STD-2073-1E, MIL-STD-129, and RP001. Additionally, the contract mandates rigorous cybersecurity compliance in accordance with NIST SP 800-171 and DFARS 252.204-7012.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Manufacturing of Circuit Card Assembly (NSN 5998015321911)This subcontract involves the manufacture and supply of Circuit Card Assembly NSN 5998015321911 for prime contractors supporting DLA supply contracts. The scope of work includes the fabrication and assembly of circuit cards utilizing SMT and soldering equipment in strict accordance with DLA technical data. The project is managed by the Department of Defense under the DLA Weapons Support Maritime Supply Chain. The contract is designated as a Total Small Business Set-Aside under NAICS code 334418. A critical requirement of the performance is adherence to domestic material restrictions, specifically complying with the Buy American Act and Berry Amendment as outlined in DFARS 252.225-7006, 252.225-7012, and 252.225-7015. The response deadline for this opportunity is November 3, 2026.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Electrical Component SupplyThis subcontract, titled Electrical Component Supply, is issued by the Department of Defense under the DLA Weapons Support ASC Commodities Division. It is designated as a Total Small Business Set-Aside under NAICS code 334418. The contract focuses on the procurement of specialized connectors and high-grade wiring intended for prime contractors, specifically requiring compatibility with part number 20000120-3 and adherence to Glenair and Northrop Grumman specifications. A critical requirement of the agreement is strict compliance with DFARS 252.223-7008, which prohibits the use of hexavalent chromium. The supplier is responsible for delivering certified raw materials and components accompanied by all necessary Material Safety Data Sheets and appropriate hazard labeling. The solicitation was posted on October 19, 2026, with a response deadline of November 2, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Electrical Power Cable Assembly ManufacturingThis subcontract, issued by the DLA Weapons Support ASC Commodities Division, involves the manufacture of high-reliability electrical power cable assemblies under NSN 6150-01-516-5791. The contractor is responsible for fabricating assemblies to part number 20000120-3 in strict accordance with Glenair or Northrop Grumman specifications. Compliance with MIL-STD-129 for marking and MIL-STD-1916 for quality sampling is mandatory to ensure the finished and packaged products meet Department of Defense standards. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 334418. To be eligible, providers must maintain CMMC Level 2 certification and adhere to DFARS 252.225-7001 regulations. The solicitation was posted on October 19, 2026, with a response deadline of November 2, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supply of Nonmetallic Hose Assemblies (P/N 60449-109)This subcontract involves the procurement and delivery of 10 nonmetallic hose assemblies, specifically Air Cruisers Company, LLC part number 60449-109, for the Defense Logistics Agency Weapons Support Fluid Handling Division. The items must adhere to Critical Application Item quality standards and be delivered to New Cumberland. The contractor is responsible for palletizing all shipments in accordance with RP001 DLA Packaging Requirements and submitting all necessary reports through the Wide Area Workflow system. This effort supports prime contractors on DLA supply contracts under NAICS code 334418.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Supply of Pin-Rivets (NSN 5320-01-441-2840)This subcontract, issued by the DLA Weapons Support ASC Commodities Division under the Department of Defense, requires the manufacture or procurement of 63 pin-rivets meeting NSN 5320-01-441-2840 and FSC 5320 specifications. The items are to be delivered to DLA Distribution Warner Robins at Robins Air Force Base. This opportunity is designated as a Total Small Business Set-Aside under NAICS code 334418. The contractor must ensure strict adherence to packaging and marking standards as well as DFARS 252.204-7012 regulations. A critical requirement for this contract is the possession of CMMC Level 2 certification. Interested parties must have submitted their responses by the deadline of October 27, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

More opportunities from National Science Foundation

Same awarding agency

NSF 26-510 | Environmental Technologies — Resiliency

Solicitation # nsf-seedfund-ET-ET6_SBIR

The National Science Foundation has issued solicitation nsf-seedfund-ET-ET6_SBIR under the Environmental Technologies program, specifically focusing on the subtopic of Resiliency. This initiative seeks innovative solutions in environmental sensing, data management, and advanced analytics to address critical environmental challenges. The program prioritizes technologies that provide novel approaches to problems that are currently underdeveloped or lack existing solutions. This opportunity is a total small business set-aside, restricting eligibility to organizations with fewer than 500 employees in accordance with SBIR and STTR mandates. Interested parties can find further details and application guidelines through the NSF Seed Fund portal.

Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

DEADLINE

NSF 26-510 | Robotics — Robotic Applications

Solicitation # nsf-seedfund-R-R3_STTR

The National Science Foundation is seeking proposals under the Robotic Applications subtopic for the SBIR/STTR program, focusing on advancements in robot intelligence, experiential learning, and high-performance hardware. Key areas of interest include situational awareness, artificial intelligence, and innovations in recognition, emotional response, and coordination. The agency encourages interdisciplinary teams involving biologists and psychologists to integrate knowledge of animal nervous systems and brain behavior. Additionally, the solicitation targets next-generation automation, flexible assembly lines for mass customization, and agile robotic systems for cost-effective small lot-size manufacturing. Eligible projects include robotic applications in healthcare, smart drones, medical devices for surgical assistance, exoskeletons, and personal caregiving robots. There is a strong emphasis on human-centered interaction, the future of work, and technologies supporting individuals with disabilities. However, the program strictly prohibits funding for clinical trials, safety studies, or the development of clinical-stage drug candidates and medical devices for regulatory purposes. Only limited human subject studies for feasibility or proof-of-concept are acceptable. This is a total small business set-aside for companies with fewer than 500 employees.

Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

DEADLINE

NSF 26-510 | Artificial Intelligence

Solicitation # nsf-seedfund-AI_SBIR

The National Science Foundation is soliciting proposals under the NSF 26-510 Artificial Intelligence program, specifically targeting high-risk technical innovations with significant commercial and societal potential. This solicitation focuses on deep learning-based AI systems and specialized AI hardware, emphasizing the development of technologies that are safe, reliable, fair, and privacy-preserving. Key areas of interest include computational efficiency, robustness against adversaries, and the creation of sustainable hardware architectures and edge devices, such as intelligent systems on a chip. This opportunity is a Total Small Business Set-Aside under the SBIR/STTR mandate, restricting eligibility to organizations with fewer than 500 employees. While the program highlights specific subtopics like natural language processing and computer vision, it welcomes all proposals that drive cutting-edge AI innovation regardless of the specific subtopic. Interested parties can find further details through the official Seed Fund website.

Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

DEADLINE

NSF 26-510 | Cloud and High-Performance Computing — Computational Architecture

Solicitation # nsf-seedfund-CH-CH2_STTR

The National Science Foundation is seeking proposals under solicitation nsf-seedfund-CH-CH2_STTR for the Cloud and High-Performance Computing topic, specifically focusing on Computational Architecture. This initiative aims to fund software or hardware innovations that significantly enhance the power, efficiency, and overall performance of cloud and high-performance computing platforms. Key areas of interest include improvements to energy management, data storage, latency, data integrity, availability, and cost reduction. This opportunity is a total small business set-aside under the SBIR/STTR mandate, restricting eligibility to organizations with fewer than 500 employees. While the focus is on computational architecture, the agency welcomes all proposals that demonstrate technical innovation and substantial commercial potential within the broader scope of cloud and high-performance computing.

Computing Infrastructure Providers, Data Processing, Web Hosting, and Related Services

POSTED

DEADLINE

NSF 26-510 | Agricultural Technologies — Polyculture Systems

Solicitation # nsf-seedfund-AG-AG7_SBIR

The National Science Foundation is soliciting proposals under the Agricultural Technologies program, specifically focusing on Polyculture Systems. This initiative seeks multidisciplinary and systems-level innovations that optimize farm production ecosystems and the utilization of natural resources. The primary goal is to develop technologies that balance increased biodiversity with sustainable yield production. This opportunity is identified as solicitation nsf-seedfund-AG-AG7_SBIR and is designated as a total small business set-aside for entities with fewer than 500 employees. Interested parties can find further details through the NSF Seed Fund portal.

Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

DEADLINE

NSF 26-510 | Mobility — Supply Chain Transparency and Security

Solicitation # nsf-seedfund-MO-MO5_SBIR

The National Science Foundation is soliciting proposals under the Mobility topic, specifically focusing on Supply Chain Transparency and Security. This initiative seeks novel innovations for the movement of goods and people across land, air, and sea to enhance sustainability and resiliency. Eligible projects may include technical breakthroughs addressing infrastructure and flow challenges in global, urban, and rural settings, with a preference for interdisciplinary and collaborative approaches. All proposed innovations must demonstrate the potential for a sustainable business model. This solicitation, identified as nsf-seedfund-MO-MO5_SBIR, is a total small business set-aside under the SBIR/STTR mandate, limiting eligibility to organizations with fewer than 500 employees. Posted on May 22, 2026, the opportunity is managed by the National Science Foundation and aims to address critical mobility grand challenges through advanced technical research and development.

Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

DEADLINE

NSF 26-510 | Medical Devices

Solicitation # nsf-seedfund-MD_STTR

The National Science Foundation is soliciting proposals under the Medical Devices program to support the development of novel medical device platforms and the translation of emerging scientific principles into health practice. This initiative targets leading edge innovations based on new discoveries or approaches to medical technology. While limited human subject studies are permitted for feasibility and proof of concept objectives, the program strictly prohibits proposals focused on clinical trials for safety and efficacy, sample size calculations, or the development of drug candidates. This opportunity is a total small business set-aside under the SBIR/STTR mandate, limited to organizations with fewer than 500 employees. Any proposals requesting support for clinical work intended for regulatory purposes or post market surveillance are considered noncompliant and will be returned without review.

Surgical and Medical Instrument Manufacturing

POSTED

DEADLINE

NSF 26-510 | Advanced Materials

Solicitation # nsf-seedfund-AM_STTR

The National Science Foundation is soliciting proposals under the Advanced Materials topic to support the development of innovative material systems for diverse commercial and industrial applications. This initiative focuses on creating new materials and addressing critical challenges related to fabrication, processing, and manufacturing to ensure successful demonstration and commercialization. This opportunity is a total small business set-aside under the SBIR/STTR mandate, specifically targeting organizations with fewer than 500 employees. Interested parties can find further details and application guidelines through the official NSF Seed Fund portal.

Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

DEADLINE

NSF 26-510 | Agricultural Technologies — Precision Agriculture

Solicitation # nsf-seedfund-AG-AG8_STTR

The National Science Foundation is soliciting proposals under the Agricultural Technologies topic, specifically focusing on Precision Agriculture. This initiative seeks multidisciplinary and systems-level innovations that optimize farm production ecosystems and the use of natural resources. The primary goal is to develop technologies that balance increased biodiversity with high yield production through complex agricultural practices. This opportunity, identified as nsf-seedfund-AG-AG8_STTR, is a total small business set-aside under the SBIR/STTR mandate, restricting eligibility to companies with fewer than 500 employees. Interested parties can find further details and application guidelines through the NSF Seed Fund portal.

Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

DEADLINE

NSF 26-510 | Artificial Intelligence — Sustainable AI Technologies for Low Resource Environments

Solicitation # nsf-seedfund-AI-AI6_SBIR

The National Science Foundation is soliciting proposals under solicitation nsf-seedfund-AI-AI6_SBIR for the development of cutting-edge artificial intelligence technologies, with a specific focus on sustainable AI for low resource environments. This initiative targets high-risk technical innovations in deep learning-based systems and AI hardware that prioritize safety, reliability, fairness, and privacy. Key objectives include improving computational efficiency, reducing energy consumption, and optimizing training data size to create robust systems capable of resisting sophisticated adversaries. The scope extends to hardware advancements, including novel architectures for sustainable processing and intelligent systems on a chip for edge devices. This opportunity is a total small business set-aside, restricted to organizations with fewer than 500 employees. All proposals that demonstrate significant potential for commercial and societal impact are encouraged to apply, regardless of the specific subtopic.

Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

DEADLINE

NSF 26-510 | Medical Devices — Procedural Technologies or Visualization

Solicitation # nsf-seedfund-MD-MD6_STTR

The National Science Foundation is soliciting proposals under the Medical Devices program, specifically focusing on Procedural Technologies or Visualization. This initiative seeks leading edge innovations that introduce new medical technologies or translate emerging scientific principles into health practice. The program is designed to support the development of novel device platforms based on new discoveries or scientific approaches. This is a total small business set-aside under the SBIR/STTR mandate for companies with fewer than 500 employees. While limited human subject studies for feasibility or proof-of-concept are permitted, the program strictly prohibits proposals for clinical trials intended to demonstrate safety and efficacy, sample size calculations, or work performed for regulatory purposes and post market surveillance. Noncompliant proposals requesting support for clinical trials will be returned without review.

Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

DEADLINE

NSF 26-510 | Medical Devices — Wearables

Solicitation # nsf-seedfund-MD-MD8_STTR

The National Science Foundation is soliciting proposals under the Medical Devices Wearables subtopic to develop leading edge medical device platforms and innovative technologies based on new scientific principles. This program focuses on translating emerging scientific discoveries into health practice, supporting projects that emphasize feasibility and proof-of-concept. While limited human subject studies are permitted to support these objectives, the program strictly prohibits proposals centered on clinical trials for safety or efficacy demonstrations, sample size calculations, or regulatory and post-market surveillance. This opportunity is a total small business set-aside under the SBIR/STTR mandate, restricted to organizations with fewer than 500 employees. Proposals that request support for full-scale clinical trials or the development of pre-clinical and clinical-stage drug candidates are considered noncompliant and will be returned without review. Interested parties can find further details through the NSF Seed Fund portal under solicitation number nsf-seedfund-MD-MD8_STTR.

Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS