Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Nut Driver

Active

Z4903State & Local

Response Deadline08/06/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The solicitation calls for a 1/4 inch nut driver with a hollow shaft and insulated handle rated for 1000 volts, complying with the F1505 standard for electrical safety. Only approved manufacturers and part numbers are acceptable, specifically ELECTSAL-HN014, OELWORLDIT-30804-3, WIHA32264, or equivalent models that meet the same performance and safety requirements. The item is intended for use in electrical work environments where insulation and voltage protection are critical to operator safety. The solicitation, identified by number Z4903, was posted on July 31, 2026, with a response deadline of August 6, 2026, at 7:00 PM. It is issued by Nashville Electric Service under the SLED government classification, and the performance location is in Nashville, Tennessee. Procurement inquiries should be directed to Alan Martinez, the primary point of contact, via email at amartinez@nespower.com or phone at 615-747-3720. All bids must be submitted through the official vendor portal at the provided UI link.

General Info

1/4 inch insulated nut driver, 1000V, F1505 compliant, approved part numbers only, bid due August 6, 2026, Nashville Electric Service.

Agency

Tennessee → Nashville Electric ServiceView Agency

NAICS

423610 - Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant WholesalersView NAICS

Place of Performance

Nashville, TN, US

Set-Aside

NONE

Documents

(1)

Z4903_RFB.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation

PostedJul 31

Solicitation

Response DeadlineAug 6

Submission deadline

Response Deadline

08/06/2026, 07:00:00 PM UTCin 6 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyTennessee → Nashville Electric Service

Contacts1 person available

OfficeNashville, TN, US

Organization / Agency

Tennessee → Nashville Electric Service

View Agency Profile

Office AddressNashville, TN, US

Contacts

Alan MartinezProcurement Contact

contact@example.gov

+1 (555) 000-0000

Full Description

Show more

NUT DRIVER 1/4" 1/4" NUT DRIVER HOLLOW SHAFT INSULATED HANDLE WITH 1000 VOLT RATING MEETS F1505 STANDARDS Approved Manufacturers and/or Part Numbers: ELECTSAL-HN014 OELWORLDIT-30804-3 WIHA32264 OR EQUAL.

Similar Contracts

Same NAICS industry code

Electrical Supply

Solicitation # RFQ. # RTAR_03989

The contract solicitation RFQ # RTAR_03989 is an open bid for Electrical Supply issued by the New Orleans Regional Transit Authority under the Louisiana state agency structure. The request is unsealed and accepts bids in USD, with a submission deadline of August 7, 2026, at 11:00 AM local time, following an available date of July 31, 2026, at 5:00 PM. All bid documents and communications must be accessed through the designated portal, and registration is required to view questions and responses. The bill-to and ship-to locations are both listed as 2817 Canal Street, New Orleans, LA 70119, indicating that the goods will be delivered to the same site as the purchasing entity. Primary contact for inquiries is Shaun Temple, reachable at 504-827-8366. The solicitation type is a Request for Quote, and while no specific NAICS code or set-aside provisions are indicated, the procurement is categorized under SLED government procurement. Bidders must ensure timely submission via the ProcureWare platform before the deadline.

New Orleans Regional Transit Authority

POSTED

about 9 hours ago

DEADLINE

COVER, TERMINAL BOAR

Solicitation # SPE4A7-26-Q-0946

The contract governs the supply of one unit of a terminal board cover identified by NSN 5940-01-696-6966 under solicitation SPE4A7-26-Q-0946, issued by the Department of Defense’s Defense Logistics Agency. Delivery is required within 195 days after order date with firm fixed pricing and zero tolerance for quantity variance, meaning exactly one unit must be delivered. Inspection and acceptance occur at the destination point, and the item must be shipped via the fastest traceable means—parcel post is prohibited. Packaging must comply with ASTM D3951 unless superseded by DLA Master List technical and quality requirements, which take precedence, including specific mandates from RP001 for packaging, RQ011 for removal of government identification from non-accepted supplies, and RQ017 for physical identification and bare item marking. All packaging and labeling must conform to MIL-STD-129, and palletization must follow RP001 guidelines. Sampling for quality verification must adhere to MIL-STD-1916 or ASQ H1331 Table 1 using zero-defect acceptance unless otherwise specified, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. The unit of issue is each, and the delivery destination is Hill Air Force Base, Utah, with a required ship date of July 22, 2026. Technical and quality compliance is enforced through referenced DLA documents and the manufacturer’s responsibility to meet all stipulated standards without deviation.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 14 hours ago

DEADLINE

Auto Specialty Wiring & Accessories

Solicitation # DASIowa-005-RFB-2962-2027

The Iowa Department of Administrative Services is soliciting bids for Auto Specialty Wiring & Accessories to support vehicle upfitting needs across state agencies and eligible political subdivisions. The solicitation, numbered DASIowa-005-RFB-2962-2027, was posted on July 31, 2026, with a submission deadline of August 14, 2026. Bidders must respond through the designated online portal and are required to certify and resubmit their bids if any amendments are issued or if they revisit their submission after initial certification. All previously entered data and attachments will remain intact, but failure to properly acknowledge and resubmit after an amendment will render the bid noncompliant. The resulting contract is non-exclusive, allowing the state to pursue alternative procurement methods while retaining the right to award one or more contracts based on competitive evaluation. The initial contract term begins on October 1, 2026, for a one-year period and may be extended by mutual agreement for up to five additional years. Contracts awarded under this solicitation will be available for use by all State of Iowa agencies and qualifying political subdivisions, streamlining procurement across the state. This new contract will supersede the existing Master Agreement 23094C with Waytek, Inc. Bidders are solely responsible for fully understanding the solicitation requirements and obtaining any additional information needed to submit a complete and responsive bid, as the solicitation does not encompass all possible considerations. Point of contact for inquiries is Rick Tucker, reachable via email at rick.tucker@das.iowa.gov.

POSTED

about 14 hours ago

DEADLINE

Supplying ACSS & AAC Conductor for the Ancient Lake - Frenchman Hills 115kV Line Rebuild

Solicitation # 170-13385

Grant County PUD is soliciting bids for the supply of ACSS and AAC conductor for the Ancient Lake to Frenchman Hills 115kV transmission line rebuild project, identified by solicitation number 170-13385. The estimated contract value is $6,500,000 USD, with bids due by September 2, 2026, at 2:00 PM Pacific Time. The bid opportunity was posted on July 31, 2026, and remains open for submissions until the closing date. Bidders must register and log in to access full details and submission requirements, as the process is conducted offline and prequalification is open. The contract requires delivery of conductors to support a critical infrastructure upgrade in Washington State, with performance expected in the project’s designated area. Primary points of contact for inquiries are Randall Kono, District Representative, and Emilie DeLong, Procurement Officer, both reachable via email through the Grant County PUD domain. The bid opening is scheduled for September 3, 2026, at 2:00 PM, following the submission deadline.

Grant County PUD

POSTED

about 14 hours ago

DEADLINE

in about 1 month

Sleeve 4/0 Stranded Copper

Solicitation # Z4908

The contract solicits 4/0 stranded copper sleeves measuring approximately 3 3/8 inches in length, approved for use with specific manufacturers and part numbers including ANDERSON VHS-4/0, RICHARDS HOMACC-4/0, PENN-UNBBCU4/0, TELEDYNE BBCU-4/0, DOSSERT DPC-21, ASKIN CESL40(CUS), and BURNDY HYLINK YS28. These sleeves are intended for electrical utility applications and must meet strict technical specifications to ensure compatibility and performance. The solicitation is issued by Nashville Electric Service under the state of Tennessee, with submissions due by August 5, 2026, at 7:00 PM Eastern Time, and responses must be submitted through the vendor portal linked in the contract details. The procurement is categorized as SLED, indicating a state, local, or educational entity, and is managed by procurement contact Bailey Allen, reachable via email or phone provided. There is no set-aside designation, and the place of performance is in Nashville, Tennessee, where the delivered items will be utilized.

Nashville Electric Service

POSTED

DEADLINE

Terminal Compression

Solicitation # Z4910

The contract solicits terminal compression lugs sized for 4/0 aluminum or copper cable, featuring a two-hole design with a 1/2 inch stud spaced to NEMA standards, intended for installation using a dieless compression tool. Each lug must be manufactured from tin-plated aluminum, clearly imprinted with the manufacturer's name and conductor size for traceability and compliance. Only approved manufacturers and part numbers are acceptable, including BURNDY YA28A5, ASK INC ALM4012/1.75TP, JOHNSON ALT-940, CONNECTO AHL4/0BN-TP, HOMAC AL4/0-NTN, RICHARDS AL12-2N, and CONNECTO 2CLAB4/0-50. The solicitation, identified by number Z4910, is issued by Nashville Electric Service under the Tennessee state agency and is open to responses until August 5, 2026 at 7:00 PM. The solicitation was posted on July 31, 2026, and is categorized as a state, local, or educational (SLED) procurement with no specified set-aside requirements. All deliveries and performance are expected to occur in Nashville, Tennessee. Procurement inquiries and communications should be directed to Bailey Allen, the primary point of contact, via phone at 615-747-3724 or email at ballen1@nespower.com, with additional details available through the online portal linked in the contract data.

Nashville Electric Service

POSTED

DEADLINE

Electrical Equipment and Material SupplyThe contract involves the supply of electrical equipment and materials including EVSE units, wiring devices, conduit, junction boxes, and panels, all of which must meet specified UL, NFPA, and NEMA 250 Type ratings to ensure compliance with national safety and performance standards. The materials are intended for use at a designated performance location in Bishop, California, with a zip code of 93514, and are part of a broader initiative to support sustainable infrastructure through the State of California’s Department of General Services, Office of Sustainability. All items must be sourced and delivered to meet technical specifications and quality requirements without deviation. The submission deadline for responses is August 19, 2026, at 9:00 PM Pacific Time, and the contract is classified as a subcontract under the NAICS code 423610, which pertains to wholesale trade of electrical equipment and supplies. There is no stated set-aside designation, and the procurement is open to eligible suppliers who can demonstrate capacity to provide certified materials in full compliance with the applicable codes. The solicitation is managed through the BidAmerica platform, and while no point of contact is listed, interested parties must review the full posting on the provided link to ensure complete understanding of delivery, documentation, and contractual obligations.

State of California, Department of General Services, Executive Office, Office of Sustainability

POSTED

DEADLINE

HVAC Equipment and Components SupplyThe contract pertains to the supply of new variable frequency drives, energy management system hardware, smart thermostats, and associated control components essential for modern HVAC systems, all of which must comply with manufacturer specifications and adhere to NFPA and NEC safety and electrical standards. The procurement is structured as a subcontract under a Small Business Set Aside designation, ensuring exclusive eligibility for small businesses, and falls under the NAICS code 423610 for wholesale trade of hardware and plumbing equipment. All delivered components must be fully functional, certified, and integrated-ready to support efficient building operations and regulatory compliance. The solicitation was posted on July 30, 2026, with a firm response deadline of August 13, 2026, at 5:00 PM. The contracting entity is Construction A/e Team 3 Fws under the Department of the Interior, though specific performance location and point of contact details are not provided. This effort reflects a focused initiative to upgrade HVAC infrastructure with advanced, energy-efficient technology while maintaining strict adherence to federal safety codes. Interested small businesses must submit proposals within the designated window to qualify for award.

Construction A/e Team 3 Fws

POSTED

DEADLINE

MOVAL Low Voltage Electrical Equipment

Solicitation # 2026-017

The City of Moreno Valley is soliciting bids for low voltage electrical equipment under solicitation number 2026-017, with a closing date of August 13, 2026 at 2:00 PM PT. The procurement is intended for local government use and requires vendors to submit proposals through the designated external bidding platform, where full bid documents and any subsequent addenda must be obtained. Interested parties are responsible for registering on the third-party portal and ensuring they have access to all updated materials, as the city does not assume responsibility for inaccuracies or missing information from the external source. The place of performance is designated as Moreno Valley, California, with a postal code of 92552, and all work is expected to fulfill the city’s operational needs for low voltage systems. The contracting officer for this solicitation is listed as lpalmer@biddingo.com, and all inquiries regarding the bid’s language, requirements, or discrepancies must be directed to the agency through the provided contact. The opportunity does not specify a set-aside classification or NAICS code, and vendors must independently verify eligibility and compliance with all terms before submitting a response. The bid is open to qualified suppliers willing to meet the city’s technical and delivery standards, with no formal prequalification mentioned. Participation requires direct access to the bidding portal linked in the solicitation, and failure to obtain current documentation may result in disqualification. All submissions must be received by the published deadline.

City of Moreno Valley

POSTED

DEADLINE

Terminal Connector

Solicitation # Z4888

The contract solicits terminal ubolt connectors designed for 795 MCM aluminum cable with a 4-hole pad, specified as a solderless U-bolt type. Only approved manufacturers and their corresponding part numbers are acceptable, namely DOSSERTUL90-4N-AA and DLTA-STRFU-151-AL or equivalent models, ensuring compatibility and performance standards are met. The item falls under a procurement initiative by Nashville Electric Service in Tennessee, targeting reliable electrical infrastructure components for utility applications. The solicitation, identified by number Z4888, was posted on July 30, 2026, with a response deadline of August 5, 2026, at 7:00 PM Eastern Time. This is a state, local, or educational agency procurement with no set-aside classification, open to all qualified vendors. The place of performance is Nashville, Tennessee, and all inquiries or submissions must be directed to procurement contact Bailey Allen, reachable via email at ballen1@nespower.com or phone at 615-747-3724. Bidders are expected to submit proposals through the official vendor portal linked in the solicitation.

Nashville Electric Service

POSTED

DEADLINE

Electrical Materials and Equipment SupplyThe contract pertains to the supply of electrical sub-meters, enclosures, conduit, wiring, breakers, and associated components necessary for installation across multiple project sites under the State Center Community College District in California. The materials must meet specified technical and quality standards to ensure seamless integration into existing electrical systems at the designated location in Fresno, with a zip code of 93720. This is a subcontract opportunity with a NAICS code of 423610, indicating it falls under wholesale trade of electrical equipment and supplies. The solicitation was posted on July 29, 2026, and bids must be submitted no later than September 10, 2026, at 9:00 PM Pacific Time. All responses must be submitted through the designated online portal at the provided link, and the contracting entity has not specified any set-aside provisions for small or disadvantaged businesses.

State Center Community College District

POSTED

DEADLINE

in about 1 month

EXTENSION CORD SHORT, M

Solicitation # SPE3SE-26-Q-0415

The contract specifies the procurement of 166 units of a 25-foot, 110V AC extension cord with Marine Canada cage code 3AD06 and part number MS0425, identified by NSN 7310-01-458-5060. The item must be delivered within 30 days after order date, with firm fixed pricing and zero tolerance for quantity variance. Inspection and acceptance occur at the destination, and delivery is FOB destination. Packaging must comply with ASTM D3951 and MIL-STD-129 for marking and labeling, with all DLA Master List of Technical and Quality Requirements taking precedence. Palletization must follow RP001 DLA Packaging Requirements for Procurement. The supplies are to be shipped to DLA Dist San Joaquin in Tracy, CA, with transportation governed by DLAD Proc Notes C19 and C20. Covered Defense Information may apply, and the seller must adhere to the DLA Master List revision in effect on the solicitation issue date. The item is sourced from Dometic Marine Canada Inc., and the Unit of Issue is each (EA). The solicitation number is SPE3SE-26-Q-0415, posted on July 29, 2026, with responses due by August 4, 2026.

SUBSISTENCE FSE SUPPLY CHAIN

POSTED

DEADLINE

More opportunities from Tennessee → Nashville Electric Service

Same awarding agency

Galvanized Steel Conductor Dead End Plate

Solicitation # Z4911

The contract solicits Galvanized Steel Conductor Dead End Plates compliant with the NES Specification LSK-1116, requiring the plates to be manufactured precisely according to the referenced detail design. Only approved manufacturers are eligible, including REINKE, SFORMS, THOMAS-B, UNIVERSA, HUGHESB, DIS-TRAN, DIXIE, and FALCONS, ensuring all submitted products meet the required quality and dimensional standards. The solicitation is issued by Nashville Electric Service under solicitation number Z4911 for use within Tennessee, with performance localized in Nashville. The solicitation was posted on July 31, 2026, and responses are due by August 5, 2026, at 7:00 PM Eastern Time. The procurement is classified under a SLED organization type and is managed by the agency’s procurement office in Nashville, Tennessee. All inquiries and submissions must be directed to the primary point of contact, Bailey Allen, via email at allen1@nespower.com or phone at 615-747-3724. Bidders must access the official portal at the provided UI link to submit proposals and review any additional documentation required for compliance.

Plate Work Manufacturing

POSTED

DEADLINE

Solicitation # Z4905

The contract solicits wiper blades for the Ford Explorer, specifically for the driver’s side, and mandates approval only for designated manufacturers and part numbers including MASTERPMP26B, TRICO26-15B, and EXACTFITBEAMBLADE with the Ford part number BB5Z17528E. The solicitation, numbered Z4905 and titled Wiper Blades, is issued by Nashville Electric Service under the Tennessee state and local government category, with no set-aside designation applied. Interested vendors must respond by August 6, 2026, at 7:00 PM Eastern Time, with the solicitation posted on July 31, 2026. All performance and delivery are expected to occur in Nashville, Tennessee. Contact for inquiries and submissions is Alan Martinez, Procurement Contact, reachable via email at amartinez@nespower.com or by phone at 615-747-3720. Additional details and submission procedures are available through the official vendor portal at the provided website link.

Motor Vehicle Supplies and New Parts Merchant Wholesalers

POSTED

DEADLINE

Solicitation # Z4906

Nashville Electric Service is seeking bids for 24 inch by 30 inch black rubber mud flaps with no logo under solicitation number Z4906. The solicitation was posted on July 31, 2026, and responses are due by August 6, 2026, at 7:00 PM Eastern Time. This procurement is classified under the SLED category, indicating it is targeted toward state, local, or educational entities. The contract is being managed by Nashville Electric Service in Tennessee with all performance requirements located in Nashville. Alan Martinez serves as the primary point of contact for procurement inquiries and can be reached via email at amartinez@nespower.com or by phone at 615-747-3720. Interested vendors must submit their proposals through the official portal linked at https://vendor.nespower.com/?bid=Z4906. No specific NAICS code or set-aside designation is provided, and the product specification is straightforward: black rubber mud flaps of standard dimensions with no branding or logo required.

POSTED

DEADLINE

Fuel Line, Bulbs, Fuse

Solicitation # Z4901

The contract solicits three distinct automotive components for use by Nashville Electric Service: a low-pressure fuel line hose rated for a minimum of 40 PSI and compliant with 30R7 standards, compatible with leaded and unleaded gasoline, diesel, and ethanol, methanol, and ether blends, supplied in 25-foot reels with pricing required per foot; 2 BULB 3157 light bulbs approved under specific manufacturer part numbers; and two types of fuses—a minimum 30-amp automotive fuse and a 25-amp ATC fuse—with designated approved manufacturers listed for each. All items are to be delivered in specified quantities: 30 units of the fuel hose, 2 bulbs, and 50 fuses of each type totaling 100 fuses. The request is issued under solicitation number Z4901 by the Tennessee-based agency Nashville Electric Service, with responses due by August 6, 2026, and performance expected in Nashville, Tennessee. Procurement inquiries are to be directed to Alan Martinez, the primary contact, via email or phone provided.

Motor Vehicle Supplies and New Parts Merchant Wholesalers

POSTED

DEADLINE

Solicitation # Z4900

The contract solicits four distinct types of ROLOC surfacing and conditioning discs from approved manufacturers, primarily 3M, for use in surface preparation and finishing applications. These include a 2-inch coarse grade 36 resin-bond fiber disc, a 2-inch scotch brite disc for conditioning, a 3-inch medium grade disc, and a 3-inch coarse grade disc, each specified with exact part numbers and quantities totaling 75 and 50 units respectively. All items are categorized under standardized item identifiers and must be sourced from designated approved manufacturers to ensure compliance with performance and quality requirements. The contract is issued by Nashville Electric Service under solicitation number Z4900, with a response deadline of August 6, 2026, and a closing date set for the same day. The procurement is targeted at SLED entities and is being managed through the agency’s vendor portal with primary contact information provided for inquiries and submissions. Performance of the contract is expected to occur in Nashville, Tennessee, with all deliveries required to meet the specified technical and logistical criteria outlined in the solicitation.

POSTED

DEADLINE

Solicitation # Z4899

The contract is for a battery-operated amber strobe light designed for use with a base, requiring a standard flash rate of 60 to 75 flashes per minute and a minimum battery life of 16 hours using two D-cell batteries. The unit must be constructed from high-impact plastic to ensure durability under field conditions. Only one approved manufacturer and part number, EFLARE939-AT290A, is authorized for compliance. The solicitation is issued by Nashville Electric Service under solicitation number Z4899, targeted for state, local, and educational entities. Responses are due by August 5, 2026, at 7:00 PM EST, with the posting date listed as July 31, 2026. Performance is expected in Nashville, Tennessee, and all inquiries should be directed to the primary procurement contact, K. Kegley, via phone or email provided. The contract opportunity is accessible through the official vendor portal linked in the posting.

Electric Lamp Bulb and Other Lighting Equipment Manufacturing

POSTED

DEADLINE

Solicitation # Z4902

The contract solicits Anti-Freeze Extended Life Prediluted 50% Antifreeze/Coolant in 55-gallon drums, with approved products limited to Shell Rotella ELC 50/50 #550022522, Chevron Delo Extended Life 50/50 #7811, and Texaco Extended Life Diluted 50-50. The solicitation, numbered Z4902, is issued by Nashville Electric Service under the Tennessee state agency and targets SLED sector procurement. Responses are due by August 6, 2026, at 7:00 PM Eastern Time, with the solicitation posted on July 31, 2026. All deliveries must be performed in Nashville, Tennessee, and the primary point of contact for procurement inquiries is Alan Martinez, reachable via email at amartinez@nespower.com or phone at 615-747-3720. Further details and submission instructions are available through the provided vendor portal link.

Other Chemical and Allied Products Merchant Wholesalers

POSTED

DEADLINE

Ground Connector

Solicitation # Z4909

The contract requires the supply of grounding connectors designated as CU GROUND CONNECTOR #4 - 2 TO #4 - 2 CU CABLE, which must fully comply with the latest revision of IEEE Standard 837. Only approved manufacturers and part numbers are acceptable, specifically AMPACTC83747-1 and CONNECT900105, ensuring compatibility and performance under established electrical safety and reliability criteria. The solicitation is issued by Nashville Electric Service in Tennessee under solicitation number Z4909 and is targeted at state, local, and education entities, with performance required in Nashville. The submission deadline for responses is August 5, 2026, at 7:00 PM, following a posting date of July 31, 2026. Procurement inquiries and communications must be directed to Bailey Allen, the primary point of contact, via email at ballen1@nespower.com or phone at 615-747-3724, with additional details accessible through the official vendor portal link provided.

Current-Carrying Wiring Device Manufacturing

POSTED

DEADLINE

Solicitation # Z4904

Nashville Electric Service is seeking replacement batteries for AMI and Jemstar meters, specifically lithium 3.6V 1200mAh primary batteries with wire leads and connectors, designated as Energy+ models. Only approved manufacturers and part numbers are acceptable, namely XENOXL-050F/CASE1 and DANTONAB9574T. The solicitation, identified by Z4904, was posted on July 31, 2026, with responses due by August 6, 2026, at 7:00 PM Eastern Time. This procurement is categorized under state, local, and tribal (SLED) government procurement and will be performed in Nashville, Tennessee. Alan Martinez serves as the primary point of contact, reachable via email at amartinez@nespower.com or by phone at 615-747-3720, and additional details can be found at the provided vendor portal link.

Battery Manufacturing

POSTED

DEADLINE

Solicitation # Z4907

Nashville Electric Service is soliciting paint in the form of 12 oz. aerosol cans of Sky Gray General Purpose Gloss Enamel, with approved manufacturers limited to Krylon K05531007 and Rust-Oleum 7783830. The solicitation, identified by number Z4907, was posted on July 31, 2026, with a response deadline of August 7, 2026, at 7:00 PM Eastern Time. This is a state, local, or educational (SLED) procurement opportunity with no set aside designation. The contract is for use within Nashville, Tennessee, and the point of contact for procurement inquiries is Shanna Faulk, reachable by phone at 615-747-3578 or email at sfaulk@nespower.com. Interested vendors must submit responses through the vendor portal at the provided link.

Paint and Coating Manufacturing

POSTED

DEADLINE