Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

NUT, PLAIN, HEXAGON

Active
SPE7MC-26-T-158PFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract is for the procurement of 37 plain hexagonal nuts identified by NSN 5310-01-632-5880 and part number N88364 from Leslie Controls Inc., with delivery required within 161 days under the solicitation SPE7MC-26-T-158P. The item is classified as a restricted source requiring government engineering source approval, and technical and quality requirements are mandated by the DLA Master List of Technical and Quality Requirements, with revisions controlled based on the acquisition type and amendment dates. Mercury and mercury-containing compounds are strictly prohibited in the hardware, preservation, packaging, and marking unless explicitly exempted for functional uses such as batteries, fluorescent lights, sensors, weapon systems, or specified reagents, with portable devices containing mercury needing shock-proof design and a secondary containment boundary per NAVSEA 5100-003D. Packaging must comply with MIL-STD-2073-1E and DLA Packaging Requirements, including preservation methods, wrap materials, and unit container standards, while marking adheres to MIL-STD-129 with no special marking required. Delivery is FOB origin, inspection and acceptance occur at destination, and no quantity variance is permitted. The delivery destination is the DLA Distribution facility in New Cumberland, Pennsylvania, and the contract mandates adherence to DLA transport procedures. The solicitation was posted on July 29, 2026, with responses due by August 10, 2026, under NAICS code 332722, and the point of contact is Nicole Betts at the Department of Defense.

General Info

Procurement of 37 hex nuts NSN 5310-01-632-5880, FOB origin, delivery to New Cumberland by 161 days, mercury prohibited, MIL-STD compliant.

Agency

Department Of Defense → DDSP NEW CUMBERLAND FACILITYView Agency

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DDSP NEW CUMBERLAND FACILITY
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → DDSP NEW CUMBERLAND FACILITY
View Agency Profile
Office AddressUS
Contacts
Nicole Betts
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
NUT,PLAIN,HEXAGON
NUT,PLAIN,HEXAGON
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
DATA IS PROPRIETARY OR INSUFFICIENT FOR
COMPETITIVE PROCUREMENT
NOTE: THIS IS A RESTRICTED SOURCE ITEM AND
REQUIRES ENGINEERING SOURCE APPROVAL BY THE
GOVERNMENT DESIGN CONTROL ACTIVITY.
LESLIE CONTROLS, INC. 35795 P/N 38572N-6-C-S-09
LESLIE CONTROLS, INC. 35795 P/N N88364
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
SPE7MC-26-T-158P
SECTION B
PR: 7017601059 PRLI: 0001 CONT’D
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017601059 0001 EA 37.000
NSN/MATERIAL:5310016325880
DELIVERY (IN DAYS):0161
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:10 OPI:O
INTRMDTE CONT:D3 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
IP056: MERCURY OR MERCURY COMPOUNDS ARE PROHIBITED IN PRESERVATION,
PACKAGING, PACKING AND MARKING.
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:01/19/2027 Original Required Delivery Date:03/20/2027
SPE7MC-26-T-158P NSN/Part Number: 5310-01-632-5880 Quantity: 37 EA Purchase Request: 7017601059QTY: 37 Delivery: 161 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332722
New
DIBBS
Precision Fastener Manufacturing – Flat WashersThe contract mandates the manufacture of 950 flat washers per delivery order in full compliance with NSN 5310-01-532-5236 specifications, requiring strict adherence to defined material composition, dimensional tolerances, and surface finish requirements. All production must meet the technical and quality standards established by the Defense Logistics Agency, ensuring every component is manufactured to military-grade precision and reliability. The scope is focused exclusively on producing these washers under a subcontract arrangement, with no flexibility in design or material substitution. This is a total small business set-aside under the Small Business Administration guidelines, specifically designated for businesses classified under NAICS code 332722, which covers screw, nut, and bolt manufacturing. The solicitation was posted on July 29, 2026, with a response deadline of August 12, 2026, and is managed by the ASC Commodities Division under the Department of Defense. Performance is expected to align with DLA’s logistical and quality assurance frameworks, though the precise delivery location is unspecified. Bidders must be certified small businesses eligible under FAR 19.5 to qualify for award.
ASC COMMODITIES DIVISION

POSTED

about 18 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332722
New
DIBBS
INSERT, SCREW THREAD
Solicitation # SPE4A1-26-T-2497
AVIATION SUPPLY CHAIN

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
WASHER, FLAT
Solicitation # SPE4A0-26-T-4090
AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
LEVER, LOCK-RELEASE
Solicitation # SPE7L1-26-T-889P
This contract pertains to the procurement of a lever, lock-release with part number 157D3900 and NSN 5340015582782, for a quantity of four units at a unit price of $4.00, totaling $16.00. Delivery is required within five days of contract award, with shipment to be made FOB origin and no variance permitted in quantity. Inspection and acceptance occur at the origin point, and packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including specific packaging methods, materials, and codes as outlined in DLA requirements. The item must not contain intentional additions of mercury or come into direct contact with mercury compounds, except for approved functional uses such as batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or chemical reagents specified by NAVSEA; portable items containing mercury must be shockproof and feature a secondary containment boundary per NAVSEA 5100-003D. The contractor is subject to Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment and must adhere to DLA packaging and hazardous materials shipping guidelines. Final delivery is directed to a postal address in Bogotá, Colombia, with specific transportation protocols referenced in DLAD procedural notes. The contract was issued under solicitation SPE7L1-26-T-889P, with a response deadline of August 10, 2026, and an original required delivery date of August 3, 2026. Technical and quality requirements referenced by R and I numbers are governed by the DLA Master List, with revisions controlled by the solicitation or award date depending on acquisition type.
LAND SUPPLY CHAIN

POSTED

about 18 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332722
New
DIBBS
RING, RETAINING
Solicitation # SPE4A6-26-T-10FF
The contract specifies the procurement of a retaining ring with part number MS16624-1025 and NSN 5325-00-720-8064, requiring 589 units to be delivered FOB origin within 171 days, with no variance allowed in quantity. The item is classified as a commercial item and is subject to stringent quality and technical requirements incorporated via the DLA Master List of Technical and Quality Requirements. Inspection and acceptance must occur at origin, with zero non-conformances required in sampling per MIL-STD-1916 or comparable zero-based plans, and attributes are assigned verification levels or AQLs as specified. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, with no special markings permitted, and all packaging, preservation, and marking must be free of mercury or mercury compounds. The product is designated as a critical application item, manufactured to meet MIL-DTL-21248F and MS16624E standards, and any mercury-containing components in associated instruments or lamps must be shockproof with secondary containment as per NAVSEA guidelines. The delivery is directed to DLA Distribution Warner Robbins in Georgia, with transportation governed by DLAD procedural notes, and the contract award is linked to solicitation SPE4A6-26-T-10FF issued by the Department of Defense’s ASC Commodities Division.
ASC COMMODITIES DIVISION

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
STUD SHOULDERED
Solicitation # SPE4AX-26-T-0109
The contract pertains to the procurement of 200 shouldered studs with NSN 5307-00-111-3939 under solicitation SPE4AX-26-T-0109, with a delivery deadline of 261 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective as of the solicitation or award date depending on acquisition size. Packaging must comply with DLA standards, and non-accepted supplies must have all government identification removed. The item is subject to Cybersecurity Maturity Model Certification Level 2 requirements, requiring third-party assessments by certified organizations, and physical identification of the bare item must adhere to specified marking protocols. Sampling procedures must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and attributes are to be classified with verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively for critical, major, and minor characteristics. Tailored higher-level quality requirements apply to both manufacturers and non-manufacturers, and covered defense information is subject to strict handling protocols under RD002. Technical data associated with this item is controlled under ITAR or EAR, prohibiting unauthorized export or disclosure to foreign persons, including foreign national employees, and access is restricted to contractors with approved JCP certification, completion of DOD export control training, and DLA authorization. The place of performance is Jacksonville, FL 32212-0103, and inquiries should be directed to Keith Allgeier at DLA.
SMSG AVIATION SUP CH CORPORATE LTC

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
SCREW, MACHINE
Solicitation # SPE4A6-26-T-10FW
The contract specifies the procurement of three machine screws identified by NSN 5305-01-586-7029, with a delivery requirement within 20 days after order placement. The item must comply with a recognized military or consensus non-government part standard, and only hardware manufactured to the current revision of that standard is acceptable for orders placed after the solicitation date, although previously manufactured items meeting prior valid revisions are still acceptable. All supplies must conform to DLA packaging requirements and technical quality standards referenced in the DLA Master List of Technical and Quality Requirements, which governs all verification and inspection criteria. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are treated as major. Zero non-conformances are required in sample lots unless otherwise stated. The solicitations are fully competitive and issued under a federal specification, with the procurement managed by the ASC Commodities Division of the Department of Defense. The solicitation number is SPE4A6-26-T-10FW, with a response deadline of August 6, 2026, and the place of performance is Edwards AFB, CA, 93524-8600. Primary point of contact is Ashley JONES-TURNER, reachable via email and phone provided in the contract data.
ASC COMMODITIES DIVISION

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
INSERT, SCREW THREAD
Solicitation # SPE7L5-26-T-4656
The contract pertains to the procurement of 16 units of an insert with screw thread, identified by NSN 5325-01-614-5590 and part number 14001411, supplied by SOS-FAIRBANKS MORSE. The item is governed by technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with specific provisions including packaging standards, removal of government identification from non-accepted supplies, and physical identification or bare item marking. Sampling must comply with MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based sampling plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are treated as major. Acceptance requires zero non-conformances in the sample lot unless otherwise stated, and manufacturers may choose attribute or variable inspection under MIL-STD-1916. The solicitation number is SPE7L5-26-T-4656, posted on July 29, 2026, with a response deadline of August 6, 2026. The contracting agency is the Department of Defense through Land Supplier Operations Engines, with performance located in San Diego, California, 92136-5299. Delivery is required within five days of award, and the primary point of contact is Christopher Walker, reachable via email and phone provided.
LAND SUPPLIER OPNS ENGINES

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
PARTS KIT, FASTENER
Solicitation # SPE4A7-26-Q-0923
The contract pertains to a Parts Kit, Fastener with NSN 1560-01-699-3342, for a quantity of 20 units under solicitation SPE4A7-26-Q-0923, with a delivery deadline of 250 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective on the solicitation issue date or award date controlling based on acquisition size. The item is subject to cybersecurity compliance under CMMC Level 2, with the contractor required to be a certified third-party assessment organization. Physical identification and bare item marking standards are mandated, though unique item identification is not required per the service customer’s directive and DFARS 252.211-7003(c)(1)(i). Packaging must comply with DLA procurement standards, and inspection and acceptance occur at origin. Government identification must be removed from any non-accepted supplies. Technical data associated with the item is subject to export control under ITAR or EAR, prohibiting unauthorized disclosure to foreign persons anywhere, including U.S. subsidiaries and foreign nationals. Access to this controlled data is restricted to contractors with approved JCP certification, completed DOD export control training, and DLA authorization. The Defense Logistics Agency limits distribution to ensure compliance with DFARS 252.225-7048. The contract was posted on July 29, 2026, with responses due by August 11, 2026, and is managed by the Department of Defense under the ASC Supplier Oper AE and AF Division, with Latrice Brown as the primary point of contact.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 18 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332722
New
DIBBS
WASHER, FLAT
Solicitation # SPE4A1-26-T-2496
The contract is for the procurement of 362 flat washers identified by NSN 5310-00-543-4804 and part number CVC754-548D17, supplied by Triumph Aerospace Structures, LLC. The item is classified as a critical application product, and no approved technical data package is currently available, rendering the specification proprietary or insufficient for competitive sourcing. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the controlling revision determined by the solicitation or award date depending on acquisition size. Packaging must comply with ASTM D3951 and MIL-STD-129, subject to precedence by DLA requirements, and palletization must follow RP001 guidelines. Mercury and mercury-containing compounds are prohibited unless explicitly exempted for functional uses in batteries, instruments, or weapon systems, with portable mercury-containing devices requiring shockproof design and a secondary containment barrier per NAVSEA 5100-003D. Sampling for quality assurance must follow MIL-STD-1916, ASQ H1331, or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Zero non-conformances are required in sampled lots unless otherwise directed. The certificate of conformance is authorized unless suspended by a quality assurance letter. Delivery is FOB origin with a 146-day lead time, inspection and acceptance occur at destination, and the quantity variance is strictly zero percent. Packaging and labeling must reflect the specified unit of issue and quantity per unit pack, with all shipments directed to DLA Distribution Depot Hill in Hill AFB, Utah, under DLA transportation protocols. The original required delivery date is August 11, 2019, with a needed ship date of July 12, 2019.
AVIATION SUPPLY CHAIN

POSTED

about 18 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332722
New
DIBBS
BOLT, MACHINE
Solicitation # SPE4A6-26-T-10GA
The contract pertains to the supply of 167 machine bolts identified by NSN 5306-01-096-5593 under solicitation SPE4A6-26-T-10GA, a HUBZone set-aside issued by the Department of Defense’s ASC Commodities Division. Delivery is due in 559 days from award, and the contractor is required to perform first article testing on one unit of the item, submitting a formal test report within 60 calendar days of contract execution. The contractor must provide written notice at least 14 days before shipping the tested unit for government final acceptance testing and ensure all documentation—including test results, material certifications, and manufacturing drawings—is included with the submission. The government has 60 days after receiving the report to approve, conditionally approve, or disapprove the first article. Production lot testing follows first article approval, requiring the contractor to deliver one randomly selected sample from the production lot to the Redstone Technical Test Center under strict labeling and documentation requirements, including signed forms, traceable shipping records, and a prepaid return label. The contractor must also account for and price the cost of samples consumed during government testing. The contract prohibits Fast Pay terms and mandates that all testing, inspection, and documentation comply with FAR 52.209-3 and its alternate clause, as well as specific procurement notes referencing supplemental first article and production lot testing protocols. Shipment of production samples must be clearly marked, accompanied by full technical and quality assurance records, and delivered to the designated government testing facility. The contractor is responsible for asserting proprietary rights on documentation and ensuring all material and process certifications are current and accurate. The solicitation requires disclosure of the current dealer or distributor and their certification status, emphasizing compliance with equivalent standards. The point of contact for inquiries is Tyler Greene, and the contract is subject to government oversight through the Quality Assurance Representative. All activities must align with the technical data package and applicable military standards including MIL STD 129 for labeling.
ASC COMMODITIES DIVISION

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
CAP, FILLER OPENING
Solicitation # SPE7L1-26-T-889U
The contract pertains to the procurement of a CAP, FILLER OPENING with NSN 5340-01-371-2617 and part number 695155-1, under solicitation SPE7L1-26-T-889U, with a total quantity of 13 units to be delivered in 161 days from the award date, with delivery terms FOB origin and inspection and acceptance points at the destination. The item is classified as a commercial item, and unit identification is not required per DFARS 252.211-7003(c)(1)(i). Sampling must adhere to MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise specified, and attributes are to be classified as VII, IV, and II for critical, major, and minor respectively, with unspecified attributes treated as major. The supplier must meet all applicable DLA Master List of Technical and Quality Requirements referenced by R and I numbers, which supersede other standards like ASTM D3951. Packaging must comply with MIL-STD-129 for marking and labeling, and with RP001 for DLA packaging, requiring commercial packaging under ASTM D3951 unless the item is hazardous under FED-STD-313, in which case IP025 applies. Palletization must follow DLA guidelines, and the delivery address is DLA Distribution Warner Robbins, Robins AFB, GA. The contract is a total small business set-aside under NAICS code 332722, with a response deadline of August 10, 2026, and the required ship date is January 19, 2027. Documentation for source approval must be submitted per RC001, and all technical, quality, and packaging requirements are binding and take precedence over any conflicting commercial standards.
LAND SUPPLY CHAIN

POSTED

about 18 hours ago

DEADLINE

in 11 days
View Details

More opportunities from Department Of Defense → DDSP NEW CUMBERLAND FACILITY

Same awarding agency

NAICS: 333415
New
DIBBS
DRYER, AIR ASSY
Solicitation # SPE8E8-26-T-4918
The contract encompasses the procurement of five units of the DRYER, AIR ASSY, identified by NSN 4120-01-555-5461 and purchase request 7017585076, under solicitation SPE8E8-26-T-4918. Delivery is required within 160 days from the award date, with shipment originating FOB origin and inspection and acceptance occurring at the destination. The units must be packaged per ASTM D3951, but all DLA Master List of Technical and Quality Requirements take precedence, including mandatory labeling and marking in accordance with MIL-STD-129 and palletization per RP001. The contract mandates strict adherence to DLA packaging, documentation, and supply control procedures, including the removal of government identification from non-accepted supplies and compliance with source approval request documentation. The item may be sourced from approved vendors including BENDIX COMMERCIAL VEHICLE SYSTEMS LLC, HOLMWOOD HIGHGATE (AUST) PTY LTD, RHEINMETALL MAN MILITARY VEHICLES, and ND DEFENSE LLC, each providing their respective part numbers. The sole point of delivery is the DLA Distribution facility at New Cumberland, Pennsylvania, with a required ship date of January 18, 2027, superseding the original delivery requirement of July 22, 2026. Pricing is fixed at $5.00 per unit for a total contract value of $25.00, with zero variance allowed in quantity. All transportation logistics must conform to DLAD Proc Notes C19 and C20, and the unit of issue is established as each (EA). The solicitation was posted on July 29, 2026, with responses due by August 10, 2026, and the contract falls under NAICS code 333415 for industrial machinery manufacturing.
Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333415
New
DIBBS
FILTER ELEMENT, AIR CON
Solicitation # SPE8E8-26-T-4917
This contract specifies the procurement of air conditioning filter elements under solicitation SPE8E8-26-T-4917, with a total quantity of six units identified by NSN 4130-14-484-0132 and unit price of $6.00 per unit, resulting in a total contract value of $36.00. The delivery is scheduled for 146 days after award, with FOB origin terms and no variance allowed in quantity. Acceptance and inspection occur at the destination, and all items must comply with the DLA Master List of Technical and Quality Requirements, which supersede any other standards including ASTM D3951. Packaging must adhere to MIL-STD-129 and RP001 DLA Packaging Requirements, with palletization following specified guidelines. The filter elements are sourced from approved vendors including SCHROFF SAS, HENSOLDT SENSORS GMBH, and SAAB AKTIEBOLAG, each with their respective part numbers. The delivery destination is the DLA Distribution facility in New Cumberland, Pennsylvania, and the shipment must be prepared in accordance with DLAD Procedure Notes C19 and C20. The solicitation is a total small business set-aside under NAICS code 333415, with a response deadline of August 10, 2026, and a required ship date of January 4, 2027, with an original delivery target of January 26, 2027. All documentation including source approval requests must follow RC001 requirements, and government identification must be removed from rejected items under RQ011.
Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332911
New
DIBBS
SUBPLATE ASSEMBLY, V
Solicitation # SPE7MC-26-T-158M
The contract is for the procurement of two units of the SUBPLATE ASSEMBLY, V with NSN 4820-01-410-7974 and part number 211059730, sourced from SARGENT AEROSPACE & DEFENSE, LLC under solicitation SPE7MC-26-T-158M. Delivery is required within 147 days of contract award with FOB origin terms, and the items must be delivered to the DLA Distribution facility in New Cumberland, Pennsylvania. The unit of issue is each, with a total price of $2.00 per unit and no quantity variance permitted. All supplies must comply with DLA packaging requirements based on MIL-STD-2073-1E and MIL-STD-129 marking standards, with no special marking required. Packaging must include a primary method of preservation AE, dry climate control, and use of D3 unit containers within intermediate containers labeled as DO. The item is designated as a critical application item and is subject to technical and quality requirements referenced from the DLA Master List, including strict prohibitions against intentional use of mercury or mercury-containing compounds except for specific exempted applications like batteries, fluorescent lights, instrument sensors, weapon systems, or authorized chemical reagents. Portable devices containing mercury must meet shock-proof standards and include a secondary containment barrier per NAVSEA 5100-003D. The contract does not require Level 1/Subsafe compliance. The original required delivery date is March 4, 2027, with a need ship date of January 5, 2027, and the solicitation was posted on July 29, 2026, with responses due by August 10, 2026. The contracting office is the DLA Distribution Center, and the point of contact is Paula McClary.
Industrial Valve Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333415
New
DIBBS
FILTER ELEMENT, AIR
Solicitation # SPE8E8-26-T-4915
The contract specifies the procurement of 30 units of a shipboard HEPA filter system identified by NSN 4130-01-347-6190 and part number H2424B00-NST2T901D from Parker-Hannifin Corporation, issued under solicitation SPE8E8-26-T-4915 with a total small business set-aside classification. Delivery is required within 197 days of contract award, with a firm delivery date of February 24, 2027, and shipment must be FOB origin with no variance allowed in quantity. All items must be packaged in accordance with MIL-STD-2073-1E and MIL-STD-129, specifically in a wooden box per Navy requirements, and palletized as per DLA packaging standards. Inspection and acceptance occur at the destination, with the final delivery point being DLA Distribution at the New Cumberland facility in Pennsylvania. The contract incorporates technical and quality requirements from the DLA Master List, including a strict prohibition on intentional use of mercury or mercury-containing compounds in the supplied hardware, except for specific exempted applications such as certain batteries, instruments, and reagents defined by NAVSEA, which must also meet secondary containment and shock-proof criteria. Cybersecurity requirements mandate CMMC Level 2 self-assessment compliance and handling of covered defense information, while source approval documentation must be provided per RC001. Packaging and marking details are strictly defined, including the use of specific preservation methods and unit of issue codes, with no special markings required. The solicitation response deadline was August 10, 2026, and the contract is governed by Federal Acquisition Regulation provisions applicable to defense procurement.
Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334519
New
DIBBS
MINE, ANTIPERSONNEL,
Solicitation # SPE8E6-26-T-3919
The contract is for the procurement of 114 units of MINE, ANTIPERSONNEL, TRAINING with NSN 6920-01-533-5458 under Purchase Request 7013078993. The delivery must be completed within 36 days after award. The solicitation number is SPE8E6-26-T-3919, posted on July 29, 2026, with a response deadline of August 10, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced by R or I numbers, with the applicable revision determined by the solicitation issue date for large acquisitions or the award date for simplified acquisitions. Government identification must be removed from non-accepted supplies. The procurement is under NAICS code 334519 and managed by the DDSP NEW CUMBERLAND FACILITY under the Department of Defense. Performance is required at New Cumberland, Pennsylvania, 17070-5002. Primary point of contact is Sophia Lim, reachable via email dla-ts-fcfb.inquiry@dla.mil or phone 215-528-7481. The solicitation does not specify a set-aside type and is open to federal contractors.
Other Measuring and Controlling Device Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332216
New
DIBBS
SOLDERING IRON, ELEC
Solicitation # SPE8E6-26-T-3920
The contract is for the procurement of 14 electric soldering irons under NSN 3439-00-346-7538, with a delivery timeline of 146 days after contract award. Each unit must be supplied with five specific solder tips: one each of 5/16 inch long chisel, 1/8 inch short chisel, 1/8 inch pencil, 1/8 inch offset pencil, and 5/16 inch pyramid, all featuring a threaded design and a 1/8 inch shank diameter. The irons must include a 6 to 8 foot three-prong power cord and comply fully with DLA packaging requirements and technical quality specifications referenced through R and I numbers in the DLA Master List of Technical and Quality Requirements. The solicitation is fully competitive under a military or federal specification and is governed by the DLA Master List revision in effect on the solicitation issue date. The solicitation number is SPE8E6-26-T-3920, posted on July 29, 2026, with responses due by August 10, 2026. The contract is issued by the Department of Defense through the DDSP New Cumberland Facility, with performance required at ZIP code 17070-5002, and primary point of contact is Brett Scull at the provided email and phone number.
Saw Blade and Handtool Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332911
New
DIBBS
VALVE, SAFETY RELIEF
Solicitation # SPE7MC-26-T-158N
The contract is for the procurement of five safety relief valves identified by NSN 4820013106508 and part number BASAA05SEE from DANTE VALVE COMPANY, with a total contract value of $5.00 per unit, delivered FOB origin within 70 days of the required delivery date of December 8, 2026. The item is classified as a critical application component, necessitating strict adherence to technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, and packaging must comply with MIL-STD-2073-1E and MIL-STD-129 for marking and unit packaging. Mercury and mercury-containing compounds are strictly prohibited in or on the hardware except in specific exempted applications such as functional batteries, fluorescent lamps, sensors, or weapon systems, and any permitted mercury-containing portable lamps or instruments must include a second barrier of containment per NAVSEA 5100-003D. The contract requires compliance with DLA packaging and shipping procedures, including parcel post and freight shipping to the DDSP New Cumberland Facility in Pennsylvania, with no variance allowed in quantity. Tooling may be required for manufacturing and suppliers are directed to submit a Casting and Forging Assistance Request if needed. The solicitation was issued on July 29, 2026, with responses due by August 10, 2026, under solicitation number SPE7MC-26-T-158N, and delivery must be completed by the specified timeline without exception.
Industrial Valve Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339113
New
DIBBS
HELMET, WELDER'S
Solicitation # SPE8E6-26-T-3923
The contract is for the procurement of 70 welder’s helmets identified by NSN 4240016459397 and part number 805438-08, awarded under solicitation SPE8E6-26-T-3923 with a response deadline of August 10, 2026. The total quantity is split into two line items: 40 units and 30 units, each priced at $1.00 per unit, totaling $70.00. All items must be delivered within 196 days of contract award with delivery terms set at FOB origin, inspected and accepted at destination, and subject to zero variance in quantity. Packaging and marking requirements conform to MIL-STD-2073-1E and MIL-STD-129, with palletization adhering to DLA’s RP001 packaging standards. Items must be shipped to two designated DLA distribution centers—one in New Cumberland, Pennsylvania, and the other in Tracy, California—each with specific shipping addresses and handling instructions. Technical and quality requirements referenced by R and I numbers are governed by the DLA Master List, with applicable revisions determined by the solicitation or award date based on acquisition type. The helmet is classified under NAICS code 339113 and falls under Department of Defense procurement, with John Lieb listed as the point of contact. All packaging and shipping must comply with hazardous materials provisions and DLA transport procedural notes C19 and C20.
Surgical Appliance and Supplies Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333415
New
DIBBS
COOLER UNIT, AIR
Solicitation # SPE8E8-26-T-4913
This contract is for the procurement of three air cooler units identified by NSN 4130-01-225-1081 and part number FCU-H2-1.2KW-LVP from Engineered Coil Company, with delivery required within 146 days to the DLA Distribution facility in New Cumberland, Pennsylvania. The units must be furnished in strict compliance with DLA packaging requirements, including MIL-STD-2073-1E for preparation and MIL-STD-129 for labeling, with no special marking required. Packaging must be palletized as specified, using approved materials and methods, and all units must be shipped FOB origin with zero tolerance for quantity variance. Mercury or mercury-containing compounds are strictly prohibited unless part of exempted functional components such as batteries, fluorescent lamps, instruments, sensors, controls, weapon systems, or approved chemical reagents, and in such cases, portable devices must include shock-proof construction and a secondary containment barrier as mandated by NAVSEA 5100-003D. The contract incorporates all relevant technical and quality requirements from the DLA Master List, with the applicable revision determined by the solicitation or award date. Inspection and acceptance occur at the destination, and transportation logistics are governed by DLAD procedural notes C19 and C20. The procurement is issued under solicitation SPE8E8-26-T-4913, with a response deadline of August 10, 2026, and the delivery must be completed no later than January 4, 2027, despite the original required date of April 1, 2027.
Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339940
New
DIBBS
FLASHLIGHT
Solicitation # SPE8E7-26-Q-0269
This contract specifies the procurement of 2,595 units of a flashlight identified by NSN 6230-01-603-7205 and alternate part numbers including GHOST-MPLS-MC and STREAMLIGHT INC P/N 080926-14510-8, under solicitation SPE8E7-26-Q-0269. The requirement is issued on a firm fixed price basis with zero variance allowed in quantity, and delivery must be completed within 30 days after award. Inspection and acceptance occur at the destination, with shipment originating from the supplier’s location. All packaging must comply strictly with DLA’s Master List of Technical and Quality Requirements, which supersedes any other standards such as ASTM D3951, and must conform to MIL-STD-129 for marking and labeling. If the item is classified as hazardous under FED-STD-313, it must be packaged per TQ requirement IP025; otherwise, commercial packaging per ASTM D3951 is acceptable, though DLA standards take precedence. Palletization must follow RP001: DLA Packaging Requirements for Procurement. The delivery destination is the DLA Distribution DDSP New Cumberland Facility in Pennsylvania, and transportation is governed by DLAD Proc Notes C19 and C20. The government’s material need date is January 8, 2027, and the contract incorporates provisions regarding covered defense information and the removal of government identification from non-accepted supplies.
Office Supplies (except Paper) Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 6 days
View Details
NAICS: 332911
New
DIBBS
VALVE, BALL
Solicitation # SPE7MC-26-T-158K
This contract is for the procurement of 69 ball valves with a NSN of 4820-01-365-2866 and part number 022-08266B002, supplied by JOHNSON CONTROLS NAVY SYSTEMS, LLC. The valves are rated for 38 inch O.D.S. and 1000 PSI and are designated as a critical application item. Strict prohibitions apply to the intentional use of mercury or mercury-containing compounds in the valve itself or in any contact with the hardware, except for specific exceptions such as batteries, fluorescent lights, sensors, weapon systems, or chemical reagents authorized by NAVSEA; portable devices containing mercury must have shock-proof construction and a secondary containment boundary as per NAVSEA 5100-003D. Class I ozone depleting chemicals are entirely banned from use in the product or any associated materials. Packaging and preservation must adhere to MIL-STD-2073-1E and MIL-STD-129, with no mercury permitted in any preservation, packaging, packing, or marking materials. The contract requires delivery FOB origin within 161 days, with zero variance allowed in quantity, and inspection and acceptance occur at the destination. Delivery is to the DLA Distribution facility at New Cumberland, Pennsylvania. The unit price is $69.00 per unit, with a total contract value of $4,761. The solicitation was issued on July 29, 2026, with responses due by August 10, 2026, and the original required delivery date is December 18, 2027, though a need ship date is listed as January 19, 2027. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, and the unit of issue is the individual unit as defined by DoD standards.
Industrial Valve Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 11 days
View Details
NAICS: 541512
New
DIBBS
Cybersecurity Compliance (NIST SP 800-171)The contract entails the implementation and assessment of cybersecurity controls as specified in NIST Special Publication 800-171 for systems that handle controlled unclassified information, ensuring compliance with federal requirements for protecting sensitive but unclassified data. The work is structured as a subcontract and is focused on the NEW CUMBERLAND facility with a ZIP code of 17070-5002, under the oversight of the Department of Defense through its DDSP NEW CUMBERLAND FACILITY. The effort requires a thorough evaluation of existing security postures, configuration of required controls, documentation of implementation, and formal assessment to verify adherence to the NIST framework, with all activities tied to the NAICS code 541512 for computer systems design services. Proposals must be submitted by the deadline of July 31, 2026, with the solicitation posted on July 28, 2026. The performance location is restricted to the specified facility, and while no set-aside provisions are identified, the subcontract nature implies the prime contractor will delegate this specialized cybersecurity compliance task to a qualified third party. There is no designated point of contact provided in the data, and all inquiries must be addressed through the official solicitation link hosted on the DIBBS platform. Successful execution of this contract will ensure that sensitive information processed within the designated system meets DoD cybersecurity standards, reducing risk and enabling continued eligibility for defense-related work involving CUI.
Computer Systems Design Services

POSTED

2 days ago

DEADLINE

in 1 day
View Details