This Solicitation opportunity from Department Of Defense was posted on May 27, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.
NUT, SELF-LOCKING, ASSEM
Contract Overview
Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.
Active Opportunities Like This One
AI Contract Overview
This contract covers the procurement of 135 units of self-locking nuts assembled with washers, identified under NSN 5310-00-004-5118 and part number MS21224-6. The item is classified as a commercial product and must meet stringent military and defense quality and technical standards, including compliance with MIL-STD-130N for identification marking and MIL-STD-1916 or ASQ H1331 for sampling and inspection protocols. The nuts are critical application items requiring Class 3A and 3B thread inspections per FED-STD-H28/20, with exclusion criteria for very small internal or external threads. Packaging must adhere to MIL-STD-2073-1E and marking in accordance with MIL-STD-129, ensuring proper preservation, cushioning, and palletization. The contract mandates inspection and acceptance at the origin, with zero tolerance for non-conformance in sampled lots unless otherwise specified. The delivery timeframe is within 20 days FOB origin, with no quantity variance allowed. The procurement is managed by the Defense Logistics Agency (DLA), specifically through the ASC Commodities Division under the Department of Defense, with contact designated as Xavier Keyes. The proposed solicitation period runs from late May to early June 2026. Compliance with cybersecurity maturity (CMMC Level 2) and specific packaging and quality requirements tailored to higher contract levels must be observed. The delivery destination is the 2nd Supply Depot in Busan, South Korea, coordinated through designated freight forwarding instructions. Overall, the contract ensures that all manufacturing, quality assurance, inspection, packaging, and delivery procedures meet federal standards and Department of Defense mandates for critical defense hardware.
General Info
Agency
NAICS
Place of Performance
USSet-Aside
Timeline
Submission Closed
Organization & Contact Information
Full Description
NUT, SELF-LOCKING, ASSEMBLED WASHER
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment SPECIFICATION RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RD002, COVERED DEFENSE INFORMATION APPLIES
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
CERTIFICATE OF CONFORMANCE PROCEDURES (FAR 52.246-15) ARE AUTHORIZED,
UNLESS WITHELD BY A QUALITY ASSURANCE LETTER OF INSTRUCTION.
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
THIS ITEM IS IDENTIFIED AS A COMMERCIAL ITEM (TO INCLUDE 'COMMERCIAL
OF A TYPE')
RT001: MEASURING AND TEST EQUIPMENT
MIL-STD-130N, 16 Nov 2012 IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY THE DRAWING(S) LISTED BELOW ARE AVAILABLE AT
SPE4A6-26-T-72F6
SECTION B
DLA DURING "OPEN SOLICITATION ONLY".
TO RECEIVE A COPY OF THE DRAWING(S)<(>,<)>
FOR EBS SOLICITATIONS USE URL
HTTPS://WWW.DIBBS.BSM.DLA.MIL/RFQ/
CRITICAL ITEM SOURCE INSPECTION REQUIRED.
GAUGING REQUIREMENTS AS FOLLOWS
ALL CLASS 3A AND 3B THREADS WILL BE INSPECTED
FOR DIMENSIONAL CONFORMANCE IN ACCORDANCE WITH
SYSTEM 22 OF FED-STD-H28/20. THIS EXCLUDES
SELF-LOCKING NUTS, INTERNAL THREADS SMALLER
THAN .190 INCH DIA AND EXTERNAL THREADS SMALLER
THAN .138 INCH DIA.
MS21224, P/N MS21224-6, THREAD CLASS 3B
CRITICAL APPLICATION ITEM
IAW BASIC NON GOVT STD NASM21224
REVISION NR 3 DTD 11/29/2019
PART PIECE NUMBER: P/N MS21224-6
IAW REFERENCE NON GOVT STD NASM25027
REVISION NR 1 DTD 12/21/2012
PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7016941860 0001 EA 135.000
NSN/MATERIAL:5310000045118
DELIVERY (IN DAYS):0020
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:050 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:B
UNIT CONT:BD OPI:O
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:Q PACKING LEVEL: B
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING
SPE4A6-26-T-72F6
SECTION B
PR: 7016941860 PRLI: 0001 CONT’D
REQUIREMENTS FOR PROCUREMENT
FREIGHT FORWARDER:
MULTIPLE FORWARDERS EXIST. TRANSPORTATION SEE DLAD PROC NOTE C19. FIRST DESTINATION TRANS SEE DLAD PROC
NOTE C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
BKSL00
THE 2ND SUPPLY DEPOT
FMS IMPORT MANAGER (82-51-790-5619)
8BUDO-RO GAMMAN-DONG NAM-GU
BUSAN
KR
MARKFOR
BKSL00
THE 2ND SUPPLY DEPOT
FMS IMPORT MANAGER (82-51-790-5619)
8BUDO-RO GAMMAN-DONG NAM-GU
BUSAN
KR
M/F: (TCN) BKSL5V61290001
RDD: 137
PROJ: TP 2
SUPP ADD: BA5KXJ SIG: L
FOR GOVERNMENT USE ONLY: (IPD) 06
DIC: A01 DIST: B01 ADV: FC: YY
Need Ship Date:00/00/0000 Original Required Delivery Date:06/01/2026
SPE4A6-26-T-72F6 NSN/Part Number: 5310-00-004-5118 Quantity: 135 EA Purchase Request: 7016941860QTY: 135 Delivery: 20 days ADO