This Solicitation opportunity from Department Of Defense was posted on May 27, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.
SCREW, MACHINE
Contract Overview
Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.
Active Opportunities Like This One
AI Contract Overview
The contract solicits 16,326 machine screws, close tolerance, with part number 51B333-5 and NSN 5305-00-809-1422, manufactured to strict technical specifications including a #10-32 UNF-3A thread, 0.588 inch nominal length, made of steel with cadmium plating. This is a commercial item procurement governed by the DLA Master List of Technical and Quality Requirements, which override all other standards including ASTM D3951 and MIL-STD-129 for packaging and marking. Physical identification of bare items is required per RQ017, and packaging must be palletized according to RP001, with unit pack quantity 025. Inspection and acceptance occur at destination using zero-defect sampling per MIL-STD-1916 or ASQ H1331, with critical attributes requiring zero non-conformances even if MIL-STD-105 or Z1.4 is used for lot sizing. The item is source-controlled, requiring manufacturers to have direct access to limited rights data or traceability to approved sources; only qualified vendors listed—Northrop Grumman, SPS Technologies, Huck International, Hi-Shear, and others—are eligible to quote. The acquisition is a total small business set-aside with HUBZone price evaluation preference, and submission of a Safety Data Sheet is mandatory prior to award, with failure resulting in nonresponsibility. The contractor must comply with DFARS 252.204-7012 for safeguarding covered defense information, FAR 52.203-19 prohibiting internal confidentiality agreements, and the Buy American Act and Berry Amendment requiring domestic materials. Cybersecurity compliance includes NIST SP 800-171 and safeguarding contractor information systems. Delivery is FOB origin, due 158 days after the solicitation date, with final shipment to DLA Distribution in New Cumberland, PA. Invoicing must be processed through WAWF, requiring SAM registration and WAWF account access. Offerors must be registered in SAM, comply with whistleblower and anti-trafficking requirements, and provide representations regarding small business, HUBZone, 8(a), and other socioeconomic statuses. The contract prohibits acquisition of covered defense telecommunications equipment and mandates notifications for potential safety issues. All documentation must reference the governing drawing revision NR
General Info
Agency
NAICS
Place of Performance
2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, USASet-Aside
Timeline
Submission Closed
Organization & Contact Information
Full Description
SCREW, CLOSE TOLERANCE
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
THIS ITEM IS IDENTIFIED AS A COMMERCIAL ITEM (TO INCLUDE 'COMMERCIAL
OF A TYPE')
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
THIS IS A SOURCE CONTROLLED ITEM WHICH MUST BE
MANUFACTURED AND TESTED IN ACCORDANCE WITH THE
CITED LIMITED RIGHTS DATA. THE GOVERNMENT CAN
NOT PROVIDE THE DATA. ONLY THOSE VENDORS WHO
HAVE ACCESS TO THE DATA OR CAN PROVIDE TRACE
ABILITY TO THE APPROVED SOURCES SHOULD QUOTE.
SAR PACKAGE IS REQUIRED IF YOUR COMPANY IS
CONSIDERING SOURCE APPROVAL.
NORTHROP GRUMMAN CORP (76823), P/N 51B333-5
PROCUREMENT NOTES: 1.,,SCREW SIZE: #10(.190")-32 UNF-3A X 0.588" NOMINAL
2.,,MATERIAL: STEEL 3.,,SURFACE TREATMENT: CADMIUM PLATED
RT001: MEASURING AND TEST EQUIPMENT
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
SPE4A6-26-T-72E9
SECTION B
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
CRITICAL APPLICATION ITEM
SPS TECHNOLOGIES, LLC 06725 P/N 51B333-5
HUCK INTERNATIONAL, INC 17446 P/N 51B333-5
SPS TECHNOLOGIES LLC 27624 P/N 51B333-5
HI-SHEAR CORPORATION 73197 P/N 51B333-5
SPS Technologies, LLC DBA 80539 P/N 51B333-5 HOWMET GLOBAL FASTENING SYSTEMS INC 92215 P/N 51B333-5 LISI AEROSPACE CANADA CORP DIV HI L4528 P/N 51B333-5
IAW BASIC DRAWING NR 76823 51B332 REVISION NR 35 DTD 10/09/1993 PART PIECE NUMBER: 51B333-5
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7016941667 0001 EA 16,326.000
NSN/MATERIAL:5305008091422
DELIVERY (IN DAYS):0158
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:025
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
SPE4A6-26-T-72E9
SECTION B
PR: 7016941667 PRLI: 0001 CONT’D
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:00/00/0000 Original Required Delivery Date:05/27/2026
SPE4A6-26-T-72E9 NSN/Part Number: 5305-00-809-1422 Quantity: 16,326 EA Purchase Request: 7016941667QTY: 16326 Delivery: 158 days ADO
More opportunities from Department Of Defense → ASC COMMODITIES DIVISION
Same awarding agency
Find Active Opportunities Like This
Get AI-powered intelligence on the opportunities still open
Every page of the solicitation package shredded into a compliance breakdown
AI-powered matching based on your capabilities and past performance
Competitor and incumbent history on the requirement
Automated alerts on amendments, Q&A deadlines, and award
Join 650+ contractors already using CLEATUS