Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

NUT, SELF-LOCKING, HE

Active
SPE4A6-26-T-05LQFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of a self-locking nut with the NSN 5310-01-717-8608, quantity of one unit, under solicitation SPE4A6-26-T-05LQ, with a delivery requirement of 20 days after delivery order. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, accessible online, with revision control based on solicitation or award date depending on acquisition size. Packaging must comply with DLA standards, and non-accepted supplies must have government identification removed. Bare items must be physically marked according to specified guidelines. Sampling follows MIL-STD-1916 or ASQ H1331 Table 1 unless otherwise directed, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are treated as major. Zero non-conformances are required unless otherwise stated. The item contains technical data subject to ITAR or EAR export controls, prohibiting unauthorized disclosure to foreign persons, including foreign nationals within the U.S., and applies DFARS 252.225-7048. Access to this controlled data is restricted to contractors certified under the US/Canada Joint Certification Program, who have completed mandatory DLA training and been formally approved. The solicitation was posted on July 12, 2026, with a response deadline of July 20, 2026, under NAICS code 332722, and is managed by the Department of Defense’s ASC Commodities Division with performance in Mechanicsburg, Pennsylvania. Primary point of contact is Charece Smith.

General Info

Procure one self-locking nut NSN 5310-01-717-8608, deliver in 20 days, ITAR/EAR controlled, certified access only.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer ManufacturingView NAICS

Place of Performance

5450 CARLISLE PK BLDG 209N, MECHANICSBURG, PA, 17050-2411, US

Set-Aside

NONE

Documents

(1)

Request for Quotations SPE4A6-26-T-05LQ dated 2026-07-13

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS
Contacts
Charece Smith
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
NUT,SELF-LOCKING,HE
NUT<(>,<)> SELF-LOCKING<(>,<)> HE
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RD002, COVERED DEFENSE INFORMATION APPLIES
RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO)
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
SPE4A6-26-T-05LQ
SECTION B
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 5310-01-717-8608 Quantity: 1 EA Purchase Request: 7017219074QTY: 1 Delivery: 20 days ADO

Similar Contracts

NAICS: 332722
New
DIBBS
NUT, SELF-LOCKING, BAThe solicitation SPE4A6-26-T-05LN seeks a self-locking nut, NSN 5310-00-880-5844, with a total quantity of 681 units to be delivered within 450 days after order placement. The contract requires the submission of one unit of this item within 90 calendar days for First Article Testing at Hill Air Force Base, with the Government having 150 days from receipt to issue written approval, conditional approval, or disapproval. Disposition of the test unit must follow FAR provisions, and Fast Pay is not applicable. Offerors must comply with domestic sourcing restrictions including the Berry Amendment and Buy American Act, with thresholds lowered to $150,000, requiring full disclosure of any non-domestic materials used. Small business joint ventures must provide specific representations to qualify under applicable set-asides. All quotes must avoid the use of additive manufacturing unless formally approved in advance, and offers containing AM-produced items will be deemed non-responsive. Additionally, bidders must confirm they will not provide covered telecommunications equipment or services under FAR 52.204-24 or DFARS 252.204-7016. Vendors must register via DLA’s new AMPS system within two months to access the Vendor Shipment Module and maintain shipping capability, and those using VSM WebServices must update their internal schema to avoid loss of access. Quoters are strongly encouraged to provide quantity ranges to accommodate fluctuating demands without administrative burden, except for Auto IDC. Offers are expected to include current dealer or distributor certification details, and those unable to quote by the closing date must submit a “No Bid” via DIBBS with an anticipated quote date or reason. Non-compliance with any of these requirements will render an offer ineligible for award.
ASC COMMODITIES DIVISION

POSTED

about 15 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
BOLT, INTERNAL WRENCHThe contract specifies the procurement of 2,910 units of an internal wrenching bolt identified by NSN 5306-01-051-9622, with a required delivery within 85 days from contract award. The item is classified as a commercial item and designated as a critical application component. Multiple qualified manufacturers are listed including Lockheed Martin Corp, HOWMET Global Fastening Systems Inc, Avibank Mfg., Inc., and The Monadnock Company, each with their respective part numbers. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R-codes such as RQ002 for configuration change management, RQ017 for bare item marking, and RP001 for DLA packaging standards, which supersede all other specifications including ASTM D3951. Packaging must comply with MIL-STD-129 and palletization requirements under RP001, with all items marked and labeled accordingly. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 with zero nonconformances required unless otherwise stated; critical attributes are assigned the highest verification level. The contract mandates FOB origin delivery to Hill AFB, Utah, with inspection and acceptance occurring at the destination. The purchase request number is 7017279932, and the contract solicitation number is SPE4A6-26-T-05MU, with a response deadline of July 20, 2026, and an original required delivery date of November 23, 2026. No quantity variance is permitted. The unit of issue is each, and all transportation and shipping instructions reference DLAD procedures.
ASC COMMODITIES DIVISION

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
SCREW, MACHINEThe contract specifies the procurement of 24 machine screws identified by NSN 5305016279951 and part number 106-0345 from Portland Valve LLC, with a unit price of $24.00 and a total contract value of $576.00. Delivery is required within 237 days FOB origin, with no tolerance for quantity variance, and inspection and acceptance occur at the destination. The screws must be packaged in strict compliance with MIL-STD-2073-1E and marked according to MIL-STD-129, with no special marking required. Packaging must adhere to DLA’s procurement requirements, including intermediate containment and labeling standards, and the shipment is directed to the DLA Distribution facility in New Cumberland, Pennsylvania. The contract prohibits the intentional use of mercury or mercury-containing compounds in the hardware, except for specified functional applications approved by NAVSEA, and mandates a secondary containment for any permitted mercury-containing components such as portable lamps or instruments. The solicitation number SPE7M1-26-T-204X was issued on July 12, 2026, with responses due by July 23, 2026, under a federal procurement authorized under NAICS code 332722. The contracting activity falls under the Department of Defense’s Maritime Supply Chain office, with Michael Reese listed as the point of contact. Technical and quality requirements referenced in the contract are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition scale. Transportation instructions follow DLA procedural notes C19 and C20. The original required delivery date was January 18, 2027, and the needed ship date is March 18, 2027. All units of issue and purchase are aligned with DoD standards, and proper labeling and delivery protocols must be followed to ensure compliance with federal procurement procedures.
MARITIME SUPPLY CHAIN

POSTED

about 15 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332722
New
DIBBS
CLAMP, LOOPThis contract pertains to the procurement of a CLAMP, LOOP item defined by the military part standard NASM21333 Revision NR 3 dated 11/30/2022, with part number MS21333-116, and NSN 5340007647052. The requirement is for 1,452 units to be delivered within 74 days under a DLA Direct, CONUS delivery arrangement with FOB origin terms. The quantity is firm with zero variance allowed, and inspection and acceptance will occur at the destination. Packaging must strictly comply with MIL-STD-2073-1E and DLA’s packaging requirements, including marking per MIL-STD-129 with no special marking codes. Packaging methods include preservative treatment code 10, unit container D3, and no cushioning or dunnage. The item is classified as a critical application and requires full and open competition. Sampling inspections must adhere to MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances expected in sample lots unless overridden by contract stipulations. Attributes are assigned verification levels VII, IV, and II for critical, major, and minor characteristics respectively, with unspecified attributes treated as major. Only hardware manufactured to the current revision of the part standard is acceptable post-solicitation, though historically compliant units remain acceptable. Hazardous materials packaging must meet IP025 requirements, and all units shall be palletized per RP001. The solicitation number is SPE7L4-26-U-0959, with a response deadline of July 27, 2026, and the contracting office is under the Department of Defense’s LSO Combat Vehicles and Armament.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 15 hours ago

DEADLINE

in 15 days
View Details
NAICS: 332722
New
DIBBS
NUT, SELF-LOCKING, EXThis contract specifies the procurement of a self-locking nut, commercial off the shelf (COTS) item, identified by NSN 5310-14-568-4359 and part number PLH54M, with a quantity of 48 units. The item is classified as a critical application component and must comply with all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, which supersede other standards such as ASTM D3951. Packaging must adhere to MIL-STD-129 for marking and labeling, and palletization must follow DLA’s RP001 packaging requirements. The contract requires delivery FOB origin within 169 days of award, with zero variance allowed in quantity. Inspection and acceptance occur at the destination, with the delivery address designated as the DDSP New Cumberland facility in Pennsylvania. The required ship date is January 6, 2027, and the original delivery deadline was November 7, 2026. Only approved suppliers listed — The Boeing Company, Brooks & Maldini Corporation, and Howmet Fixations Simmonds SAS — may fulfill this requirement. Transportation and shipping instructions reference DLAD Proc Notes C19 and C20, and all documentation must align with the solicitation number SPE4A6-26-T-05HX, issued under the NAICS code 332722 by the Department of Defense’s ASC Commodities Division.
ASC COMMODITIES DIVISION

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details