Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

NUT, SELF-LOCKING, PL

Active
SPE4A6-26-T-09TYFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of 880 self-locking plate nuts with NSN 5310-00-630-2370 and part number 3M143A4-4, manufactured in accordance with Technical Drawing NR 76301 3M143 Revision L dated 12/20/1994. The item is classified as a critical application component and must comply with all technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, which override any conflicting standards. Sampling is governed by MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and attributes are to be classified as VII, IV, and II for critical, major, and minor characteristics respectively, with unspecified attributes treated as major. Packaging must adhere to ASTM D3951 and MIL-STD-129 for marking and labeling, with palletization following DLA Packaging Requirements RP001, while all DLA Master List requirements take precedence. The contract mandates strict configuration control, source approval documentation, and removal of government identification from non-accepted supplies. Delivery is FOB origin with inspection and acceptance occurring at destination, with a 116-day delivery window and a required ship date of November 29, 2026, overriding the original delivery target of September 21, 2026. Quantities are fixed with zero variance permitted, and all packaging and unit of issue must align with contract specifications. The contract number is SPE4A6-26-T-09TY, with primary point of contact Mellisa Heise, and performance location at Tinker AFB, Oklahoma.

General Info

880 self-locking plate nuts, NSN 5310-00-630-2370, critical application, FOB origin, due November 29, 2026.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer ManufacturingView NAICS

Place of Performance

3301 F AVE CEN REC BLDG 506 DR 22, TINKER AFB, OK, 73145-8000, US

Set-Aside

NONE

Documents

(1)

SPE4A6-26-T-09TY.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS
Contacts
Mellisa Heise
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
NUT,SELF-LOCKING,PL
NUT,SELF-LOCKING,PLATE
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
INCLUDE RQ017 OBJECT TEXT ID ST
CRITICAL APPLICATION ITEM
TDP Rev A Gen 2 IAW BASIC DRAWING NR 76301 3M143 REVISION NR L DTD 12/20/1994 PART PIECE NUMBER: 3M143A4-4
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments%
SPE4A6-26-T-09TY
SECTION B
PR: 7017010592 PRLI: 0001 CONT’D
2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017010592 0001 EA 880.000
NSN/MATERIAL:5310006302370
DELIVERY (IN DAYS):0116
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
SW3211
DLA DISTRIBUTION DEPOT OKLAHOMA
3301 F AVE CEN REC BLDG 506 DR 22
TINKER AFB OK 73145-8000
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3211
DLA DISTRIBUTION DEPOT OKLAHOMA
3301 F AVE CEN REC BLDG 506 DR 22
TINKER AFB OK 73145-8000
US
Need Ship Date:11/29/2026 Original Required Delivery Date:09/21/2026
SPE4A6-26-T-09TY NSN/Part Number: 5310-00-630-2370 Quantity: 880 EA Purchase Request: 7017010592QTY: 880 Delivery: 116 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332722
New
DIBBS
Shear Bolt Manufacturing and SupplyThe contract entails the manufacture and delivery of 9,524 shear bolts designated by NSN 5306-01-123-4603, classified as Critical Safety and Critical Application Items that must adhere to strict military specifications governing quality, traceability, and marking. These components are essential for operational safety and require full compliance with defense standards throughout production, including documented material sourcing, lot tracking, and precise labeling to ensure accountability and reliability in military systems. The solicitation is structured as a subcontract under a Total Small Business Set-Aside, exclusively available to small businesses as defined by the SBA, with the NAICS code 332722 indicating classification under other fabricated metal product manufacturing. The Department of Defense, through its ASC Commodities Division, is the contracting authority, and responses must be submitted by August 6, 2026, following the July 27, 2026 posting date. All work is expected to meet exacting defense requirements without deviation, and the place of performance and point of contact details are not specified in the provided data.
ASC COMMODITIES DIVISION

POSTED

about 20 hours ago

DEADLINE

in 9 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, HEXAGON HThe contract specifies the procurement of 4 units of a hexagon cap screw, part number 5305-01-698-5982, manufactured to ISO 4017 revision 6 standards with a specification of M12x70-10.9-ZN5/AN, and requires full compliance with DLA packaging, marking, and quality assurance mandates. All items must be packaged in accordance with MIL-STD-2073-1E using Preservation Method 31, wrapped with approved materials, and labeled per MIL-STD-129 without special marking; palletization must meet DLA’s packaging requirements. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and critical, major, and minor attributes are assigned verification levels VII, IV, and II respectively. The screw must be physically marked per RQ017 and any non-accepted items must have government identification removed per RQ011. Delivery is to the Royal Jordanian Air Force at Prince Hassan Air Base in Safawi, Jordan, with FOB origin terms and a firm fixed price structure. The delivery deadline is 200 days after delivery order issuance, with no variance permitted in quantity. Inspection and acceptance occur at destination, and transportation details adhere to DLA procedural notes C19 and C20. The contract includes compliance with applicable technical and quality requirements referenced from the DLA Master List, and all data, including the NSN, purchase request, and delivery date, is tied to the solicitation SPE4A6-26-Q-1216 with a response deadline of August 3, 2026. The item is intended for government use and the shipment is designated under RDD 777 with a unique tracking identifier, and the material is required no later than June 22, 2026.
ASC COMMODITIES DIVISION

POSTED

about 20 hours ago

DEADLINE

in 6 days
View Details
NAICS: 332722
New
DIBBS
SEAL, PLAINThe contract pertains to the procurement of 241 units of a plain seal identified by NSN 5330-01-546-8128 under solicitation SPE7L3-26-T-134W, with a response deadline of August 7, 2026, and delivery required within 150 days after award. The item falls under Federal Supply Class 5330/5331 and must be packaged in a medium-duty, waterproof, greaseproof, opaque bag conforming to MIL-DTL-117, Type II, Class C, Style 1, to protect against ultraviolet degradation, a requirement applicable to direct vendor delivery, foreign military sales, and stock shipments. The use of asbestos as defined in FED-STD-313 is strictly prohibited. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. Government identification must be removed from any non-accepted supplies. The contract is issued by the Department of Defense through Land Supplier Operations Vehicle Support, with performance to be delivered to New Cumberland, Pennsylvania, and primary point of contact is Susan Diamond at DLA’s procurement office.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 20 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332722
New
DIBBS
FASTENER ASSEMBLY, TThe contract pertains to the procurement of a FASTENER ASSEMBLY, T, identified by NSN 5325-01-481-9443 and part numbers including CA17202F4TXR and MT172AC6F-4, sourced from approved manufacturers such as HOWMET GLOBAL FASTENING SYSTEMS INC. and AVIBANK MFG., INC. The requirement is for exactly 10 units to be delivered within five days of award, with no tolerance for variance in quantity, and delivery is FOB origin with inspection and acceptance taking place at the destination. Packaging must strictly comply with MIL-STD-2073-1E and marking requirements follow MIL-STD-129 without special markings, while palletization adheres to DLA’s packaging standards. The item is designated as a critical application item, triggering stringent quality controls including zero-defect sampling per MIL-STD-1916 or ASQ H1331, with verification levels assigned to critical, major, and minor attributes as VII, IV, and II respectively. The contract incorporates comprehensive technical and quality requirements referenced from the DLA Master List, including tailored higher-level quality provisions for both manufacturers and non-manufacturers, documentation for source approval requests, configuration change management, and the use of calibrated measuring and test equipment. All suppliers must comply with requirements for the removal of government identification from non-accepted supplies and physical identification of bare items. Shipments must be sent by the fastest traceable means—parcel post is prohibited—and delivered to the specified freight address in Jacksonville, Florida, with a required delivery date of June 11, 2026. The solicitation number is SPE4A6-26-T-09VG, issued by the Defense Logistics Agency’s Commodity Division under NAICS code 332722, with point of contact Marchello Fields, and responses are due by August 4, 2026.
ASC COMMODITIES DIVISION

POSTED

about 20 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
STUD, CONTINUOUS THREADThis contract specifies the procurement of a stud with a continuous thread, identified by NSN 5307-01-502-8735 and part number M1222ST4N12C372NCNN, with a quantity of 21 units to be delivered within 137 days under solicitation SPE4A7-26-T-596V. The item must comply with MIL-DTL-1222J technical specifications, including mandatory surface markings of material symbol, manufacturer’s symbol, and lot number directly applied per MIL-DTL-1222, with precedence order for small fasteners and packaging labeling as fallback. Manufacturer symbols must be registered in MIL-HDBK-57. A Certificate of Quality Compliance must accompany every shipment and be forwarded to the DLA Troop Support Contracting Officer, along with adherence to CDRL-COQC-19071 and other quality assurance provisions including RQ001, RQ006, RQ009, RQ011, and RQ017. Sampling must follow MIL-STD-1916, ASQ H1331, or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively, and acceptance requiring zero non-conformances unless otherwise stipulated. The item is designated as a critical application, and no mercury or mercury-containing compounds may be intentionally introduced into the hardware or its packaging, except for specified functional uses per NAVSEA 5100-003D. Packaging must conform to MIL-STD-2073-1E with specific preservation, wrapping, and marking protocols, including MIL-STD-129 labeling and prohibition of mercury in preservation or packaging per IP056. Palletization follows DLA packaging requirements. Delivery is FOB origin with no quantity variance permitted, inspected and accepted at origin. The delivery destination is the DLA Distribution facility in New Cumberland, Pennsylvania, with a required ship date of December 20, 2026, and original delivery date of February 14, 2027. Unit of issue is each, and the contract references DLA’s Master List of Technical and Quality Requirements for applicable technical and quality standards.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 20 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
WASHER, KEYWAYThe contract pertains to the procurement of 370 units of a WASHER, KEYWAY with NSN 5310011794266 under solicitation SPE4A6-26-T-07US, issued by the Department of Defense’s ASC Commodities Division through DLA. Delivery is mandated FOB Origin with a 213-day lead time, and the item must be delivered by February 28, 2027, to the DLA Distribution facility in New Cumberland, Pennsylvania. The contract enforces zero variance in quantity, with inspection and acceptance performed at the manufacturer’s origin, requiring full compliance with the DLA Master List of Technical and Quality Requirements, which supersede all other standards. The washer must conform to specified military and industry specifications including MIL-STD-129 for marking and labeling, ASTM D3951 for packaging, and RP001 for palletization, with all packaging and markings adhering strictly to DLA guidelines. Sampling for quality verification must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required in the sample lot unless otherwise stated, and attributes must be classified with AQLs of 0.1 for critical, 1.0 for major, and 4.0 for minor, as dictated by the applicable drawing or QAP. Physical identification of bare items must meet RQ017 requirements, and all hazardous materials must be documented per hazard communication standards. The contractor must maintain a quality system compliant with SAE AS9003 or ISO 9001 and adhere to stringent cybersecurity mandates including NIST SP 800-171 for safeguarding controlled unclassified information, as well as DFARS clauses covering whistleblower rights, trafficking in persons, employment eligibility, sustainable products, and prohibition of hexavalent chromium. Payment must be submitted via Wide Area WorkFlow with no alternative invoicing methods permitted. The contract incorporates numerous FAR and DFARS clauses related to contractor conduct, information control, former official compensation, and transportation restrictions, including mandatory use of U.S.-flag vessels for ocean shipping unless waived. The contractor is required to provide a Unique Entity ID and CAGE code, and must complete all socioeconomic and small business representations as applicable, with no modifications allowed to the quantity or delivery terms. All technical and quality requirements referenced in the DLA Master List govern performance, and the contract operates under a simplified
ASC COMMODITIES DIVISION

POSTED

about 20 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332722
New
DIBBS
BOLT, ASSEMBLED WASHERThe contract pertains to the procurement of 1,365 units of BOLT, ASSEMBLED WASHER with NSN/Part Number 5306-01-481-7860 under purchase request 7017408437. Delivery is required within two days of award, and the solicitation number is SPE4A6-26-T-09YQ with a response deadline of August 4, 2026. The material is classified under NAICS code 332722 and is being procured by the Department of Defense through the ASC Commodities Division. Technical and quality requirements are incorporated by reference from the DLA Master List of Technical and Quality Requirements, with compliance determined by the revision in effect on the solicitation issue date for simplified acquisitions. Documentation must adhere to source approval, packaging, quality conformance inspection, and bare item marking requirements as specified by RC001, RP001, RQ006, RQ011, and RQ017. The item has no shelf life restriction and must be delivered to the place of performance in Texarkana, Texas, with no government identification to be removed from non-accepted supplies. Primary point of contact is Debra Fowler, reachable via email and phone provided.
ASC COMMODITIES DIVISION

POSTED

about 20 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CLOSE TOLERANCESCREW, CLOSE TOLERANCE, MACHINE, NSN 5305-00-956-2432, is being procured under solicitation SPE4A6-26-T-07QH with a quantity of 174 pack groups, each containing 50 units, for delivery within 75 days as directed to Robins Air Force Base, Georgia. The item is classified as a commercial item, fully competitive, and governed by military specifications with technical and quality requirements sourced exclusively from the DLA Master List of Technical and Quality Requirements, which supersedes standard industrial standards such as ASTM D3951 when conflicts arise. Inspection and acceptance occur at the manufacturer’s facility with zero non-conformances required in sampling under MIL-STD-1916 or ASQ H1331, or alternatively under MIL-STD-105/ASQ Z1.4 with zero defective acceptance unless otherwise stipulated. Critical thread dimensions for Class 3A and 3B threads must conform to SPE4A6-26-T-07QH and FED-STD-H28/20 System 22, excluding small internal and external threads below specified diameters. Direct part marking complies with MIL-STD-130N and packaging must follow MIL-STD-129 and RP001 for DLA-specific packaging, with barcoding and labeling including government identification that must be removed from non-accepted items. The contract mandates compliance with the Cybersecurity Maturity Model Certification Level 2, NIST SP 800-171, and safeguarding of covered defense information under DFARS clauses. All contractual obligations fall under a fixed-price contract structure with no option quantities specified, and payment is mandatory through WAWF. Offerors must possess a valid UEI and CAGE code, represent size and socioeconomic status accurately, and comply with trafficking in persons, equal opportunity, employment eligibility, sustainable products, and hazardous material labeling requirements. No pricing detail is provided in the solicitation, and award will be determined by the contracting officer based on technical acceptability and price, though the specific evaluation method—LPTA or trade-off—is not disclosed. All submissions must be made electronically via DIBBS by the stated deadline, and contract administration is handled by ASC Commodities Division under the Department of Defense.
ASC COMMODITIES DIVISION

POSTED

about 20 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332722
New
DIBBS
BOLT, MACHINEThe contract specifies the procurement of 3,398 machine bolts identified by NSN 5306-01-293-9534 and part number MS35764-235, manufactured in accordance with MIL-DTL-45912C and MS35764H standards, with all hardware produced after the solicitation date required to meet the current revision of these standards. The item is classified as a commercial item and a critical application item, subject to stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with sampling conducted under MIL-STD-1916 or ASQ H1331, Table 1, using zero-defect acceptance unless otherwise stated. Identification markings must comply with MIL-STD-130N alongside manufacturer logos and material codes, and all packaging must adhere to ASTM D3951 and MIL-STD-129, with palletization following DLA's specific packaging directives, superseding any conflicting standards. Delivery is FOB origin with a required delivery date of December 30, 2026, and a need ship date of December 20, 2026, under a 137-day delivery timeline. The contract enforces a zero variance tolerance on quantity, with both inspection and acceptance occurring at origin. Packaging and labeling must reflect the specified Unit of Issue and Quantity per Unit Pack as defined in the purchase order, and transportation logistics are governed by DLAD Proc Notes C19 and C20. The item is to be delivered to DLA Distribution Anniston at the designated parcel post and freight shipping address, with the contracting officer identified as Carl Younce and the solicitation issued under SPE4A6-26-T-09XA, with a response deadline of August 4, 2026.
ASC COMMODITIES DIVISION

POSTED

about 20 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
SCREW, ASSEMBLED WASHERThe item is a screw with an assembled washer, identified by NSN 5305-01-164-5837, with a quantity of 3,553 units required under purchase request 7017272336. Delivery is due within 165 days after award. The solicitation, numbered SPE4A6-26-T-09WY, was posted on July 27, 2026, with responses due by August 4, 2026, and is a total small business set-aside under FAR 19.5, classified under NAICS code 332722. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue or award date depending on acquisition size. Export control rules apply to technical data associated with this item, subject to ITAR or EAR regulations; disclosure to foreign persons, including foreign nationals within the U.S., requires prior authorization from the Department of State or Commerce. Access to this controlled data is restricted to contractors with approved US/Canada Joint Certification Program status, completed training on handling DOD export-controlled data, and formal approval from DLA. Packaging must meet DLA procurement standards. The contracting activity is the ASC Commodities Division of the Department of Defense, with performance located in Texarkana, Texas, 75507-5000. Primary point of contact is Ashley Jones, reachable via email and phone provided.
ASC COMMODITIES DIVISION

POSTED

about 20 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
RING, RETAININGThe contract solicitation SPE4A6-26-T-07LU is issued by the Defense Logistics Agency under the Department of Defense for the procurement of 8,104 retaining rings, identified by NSN 5325-00-720-8064, with delivery required 169 days after order placement, no later than September 3, 2027. The items are to be delivered FOB origin to SW3119, DLA Distribution Warner Robins, Robins AFB, GA, with inspection and acceptance occurring at the contractor’s shipping point. Packaging must strictly conform to MIL-STD-2073-1E using Code U, BD, and E5/ES containers, with no preservation materials allowed and prohibition of mercury or mercury compounds in both packaging and preservation. Marking must comply with MIL-STD-129, including bare item marking per RQ017, with hazard labeling aligned with OSHA's Hazard Communication Standard and DFARS 252.223-7001, requiring submission of Safety Data Sheets for any hazardous materials. The contract prohibits hexavalent chromium in all applications, restricts storage or disposal of toxic materials without prior approval, and enforces compliance with U.S. export control laws including ITAR and EAR. Contractors must implement NIST SP 800-171 security controls to protect Covered Defense Information and report cyber incidents within 72 hours, with these requirements flowed down to subcontractors. The acquisition is subject to restrictions on sourcing from Communist Chinese Military Companies and from covered defense telecommunications equipment listed under DFARS 252.204-7018. Pricing is not disclosed, rendering total contract value unknown, with payment processed electronically via WAWF. Offerors must hold a valid UEI and CAGE code and represent their size and socioeconomic status, including small business, HUBZone, SDB, WOSB, EDWOSB, or SDVOSB designations, and compliance with federal clauses related to equal opportunity, employment verification, anti-trafficking, and safeguarding of information systems. Proposals must be submitted electronically through DIBBS by July 30, 2026, with all technical and compliance documentation meeting stringent federal and DoD standards.
Defense Logistics Agency

POSTED

about 20 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332722
New
DIBBS
WASHER, VANEThe contract pertains to the procurement of a commercial off-the-shelf washer, vane, identified by part number 2311146-1 and NSN 5310-01-602-6673, with a quantity of 14 units to be delivered FOB origin. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation or award date depending on acquisition size. The item is exempt from Item Unique Identification per DFARS 252.211-7003(c)(1)(i). Sampling inspection must comply with MIL-STD-1916 or ASQ H1331 Table 1, using zero non-conformances for acceptance unless otherwise specified, with attribute verification levels assigned as VII, IV, and II for critical, major, and minor characteristics respectively. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129, with no special marking required and palletization following DLA packaging standards. Delivery is due within 171 days to the designated receive warehouse in Tracy, California, with no variance allowed in quantity. The contract does not specify a need for supplier manufacturing, but non-manufacturers must meet tailored higher-level quality requirements. Original delivery was required by June 13, 2027, though the need ship date is set for January 3, 2027. Inspection and acceptance occur at destination, and transportation logistics are aligned with DLA procedural notes C19 and C20. The procurement is under solicitation SPE4A5-26-T-280G, issued by the Department of Defense’s ASC Supplier Oper OEM Division, with Jessica Baake as the primary point of contact.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 20 hours ago

DEADLINE

in 2 days
View Details

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 493190
New
DIBBS
Packaging, Marking & Logistics SupportThe contract requires full compliance with military standards for packaging, marking, and bar-coding as defined by MIL-STD-2073-1E and MIL-STD-129, ensuring all items are properly prepared for military logistics and supply chain handling. Delivery is specified as FOB Origin, meaning the contractor assumes responsibility for packaging and readiness at the point of shipment, with no obligation for transportation costs or risk beyond that point. Invoicing must be processed through the Wide Area Workflow system to meet Department of Defense financial and documentation protocols. This is a subcontract classified as a Total Small Business Set-Aside under FAR 19.5, reserved exclusively for small businesses certified by the Small Business Administration. The NAICS code 493190 indicates the work falls under Other Truck Transportation, suggesting the focus is on logistics and transportation support services tied to military packaging requirements. The contracting office is the ASC Commodities Division under the Department of Defense, with proposals due by August 7, 2026, following a July 27, 2026 posting date. Compliance with all federal and military standards is mandatory for award consideration.
Other Warehousing and Storage

POSTED

about 20 hours ago

DEADLINE

in 10 days
View Details
NAICS: 541512
New
DIBBS
CMMC Assessment & Cybersecurity ComplianceThis contract entails a CMMC Level 2 assessment and comprehensive cybersecurity system hardening to ensure full compliance with NIST SP 800-171 requirements. The scope includes a detailed audit of existing security controls, identification of gaps, and implementation of remediation measures to meet the necessary cyber hygiene standards. The contractor is responsible for achieving certification through a C3PAO accredited organization, ensuring that all assessed systems are properly documented, secure, and aligned with Department of Defense cybersecurity mandates. The contract is structured as a subcontract under a Total Small Business Set-Aside designation, reserved exclusively for small businesses as defined by the SBA. It is categorized under NAICS code 541512 for Computer Systems Design Services and is issued by the ASC Commodities Division within the Department of Defense. Proposals are due by August 7, 2026, with the solicitation published on July 27, 2026. The work may be performed remotely or at the contractor’s facility, with no specific physical location designated for performance, and the award will be managed under federal subcontracting guidelines applicable to defense-related cybersecurity services.
Computer Systems Design Services

POSTED

about 20 hours ago

DEADLINE

in 10 days
View Details
NAICS: 541611
New
DIBBS
Technical Data & Export Control Compliance ServicesThe contract pertains to the management of ITAR and EAR-controlled technical data with a focus on ensuring full compliance with U.S. export control regulations. It requires comprehensive services including strict access control protocols, specialized training programs, and ongoing monitoring to enforce restrictions on foreign nationals, ensuring that sensitive technical information is handled in accordance with federal law. The scope emphasizes operational procedures that safeguard controlled data across all stages of handling, from receipt and storage to dissemination and disposal, with particular attention to personnel vetting and security awareness. This is a subcontract under a Total Small Business Set-Aside, designated for small businesses as defined by the SBA, and falls under NAICS code 541611 for administrative management and general management consulting services. The work is contracted through the ASC Commodities Division of the Department of Defense, with a response deadline of August 7, 2026, and a posted date of July 27, 2026. Performance location details are unspecified, indicating flexibility or that the work may be conducted remotely or at multiple sites. The solicitation number is SPE4A626RXB74, and the contract is managed through the DIBBS platform, requiring interested parties to review and submit proposals through the official online portal.
Administrative Management and General Management Consulting Services

POSTED

about 20 hours ago

DEADLINE

in 10 days
View Details
NAICS: 541330
New
DIBBS
First Article Testing & Quality Certification ServicesThe contract requires independent execution and comprehensive documentation of First Article Testing in strict accordance with DI-NDTI-80809B, encompassing detailed inspection, precise measurement, and formal reporting to the Defense Logistics Agency. This work must be performed with full adherence to quality assurance standards and delivered results that validate compliance with technical specifications for defense-related components or systems. All testing activities, methodologies, and outcomes must be thoroughly recorded and submitted to DLA for review and certification. This subcontract, issued under a Total Small Business Set-Aside, is classified under NAICS code 541330 and is targeted exclusively at small businesses. The performance location and detailed office address are unspecified, but the contracting entity is the ASC Commodities Division within the Department of Defense. The solicitation was posted on July 27, 2026, with a firm response deadline of August 7, 2026, allowing interested small businesses to submit proposals through the DIBBS platform. The requirement emphasizes accuracy, traceability, and regulatory compliance in delivering first article quality certification.
Engineering Services

POSTED

about 20 hours ago

DEADLINE

in 10 days
View Details
NAICS: 335999
New
DIBBS
Electrical Component Manufacturing & AssemblyThe contract requires the manufacture, assembly, and quality assurance of electrical leads in full compliance with military specifications, ensuring rigorous adherence to performance and reliability standards. All work must include First Article Testing to validate conformance before full-scale production and includes serialized delivery to enable full traceability of each component throughout its lifecycle. The solicitation is set aside exclusively for small businesses under the SBA’s Total Small Business Set-Aside program, classified under NAICS code 335999 for other electrical equipment and component manufacturing. It is issued under the Department of Defense via the ASC Commodities Division and allows responses until August 7, 2026, with the expectation of performance under a subcontracting arrangement. The place of performance and point of contact details are not specified, but all deliverables must meet stringent defense quality and documentation requirements.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 20 hours ago

DEADLINE

in 10 days
View Details
NAICS: 488510
New
DIBBS
Logistics and Shipment CoordinationThe contract focuses on the coordination of FOB-origin shipments for shear bolts, requiring full compliance with the Web-Based Supply Chain System for invoicing, ensuring all documentation meets WAWF standards. Shipment handling must be executed under DPAS-rated priority to guarantee timely delivery in support of defense logistics, with routing strictly aligned to DoDAAC and CAGE codes to ensure accurate and secure delivery to designated military recipients. This subcontract is designated as a Total Small Business Set-Aside under FAR 19.5, exclusively available to small businesses as defined by the SBA, and is classified under NAICS code 488510, which pertains to other support activities for air transportation and logistics coordination. The posting date is July 27, 2026, with responses due by August 6, 2026, and the contracting entity is the ASC Commodities Division within the Department of Defense, indicating this effort supports critical defense supply chain operations.
Freight Transportation Arrangement

POSTED

about 20 hours ago

DEADLINE

in 9 days
View Details
NAICS: 541330
New
DIBBS
Quality Inspection and Conformance ServicesThe contract requires comprehensive quality inspection and conformance testing of shear bolts using zero-defect sampling plans aligned with MIL-STD-1916 or ASQ H1331 standards, ensuring rigorous adherence to defect-free criteria throughout production. Full documentation of all testing procedures, results, and compliance records must be maintained and provided as part of delivery, leaving no room for ambiguity in quality assurance and traceability. This work is critical to confirming that shear bolts meet exacting military and industrial specifications without compromise. This is a total small business set-aside subcontract under NAICS code 541330, awarded by the ASC Commodities Division within the Department of Defense, with a response deadline of August 6, 2026. The solicitation is open exclusively to small businesses as defined by the SBA, and performance will be carried out under the direction of the DLA, though the specific place of performance is not detailed. Interested parties must submit responses through the designated DIBBS portal, and all activities must comply with federal subcontracting regulations and the stringent quality protocols defined by the referenced military and quality standards.
Engineering Services

POSTED

about 20 hours ago

DEADLINE

in 9 days
View Details
NAICS: 561910
New
DIBBS
Packaging, Preservation, and Marking ServicesThe contract calls for the military-compliant packaging, preservation, and marking of shear bolts in full accordance with MIL-STD-2073-1E and MIL-STD-129, ensuring all items meet Department of Defense standards for handling, storage, and logistics. This includes the application of barcodes and labeling as required by the specifications, with strict adherence to durability, clarity, and traceability protocols for military supply chain operations. All work must be performed under a Total Small Business Set-Aside, classified under NAICS code 561910, meaning only small businesses are eligible to bid, promoting small business participation in defense logistics. The solicitation is issued by the ASC Commodities Division within the Department of Defense, with a response deadline of August 6, 2026, and was posted on July 27, 2026. The contract is structured as a subcontract, indicating the winning vendor will likely provide services to a prime contractor fulfilling broader defense requirements. While the place of performance and point of contact details are not specified, full compliance with military packaging and marking standards remains the central obligation, with no deviations permitted. Bidders must possess the capability to meet exacting defense logistics requirements and ensure seamless integration of shear bolts into defense inventory and distribution systems.
Packaging and Labeling Services

POSTED

about 20 hours ago

DEADLINE

in 9 days
View Details
NAICS: 323112
New
DIBBS
Packaging & Preservation Services per MIL-STD-2073-1EThe contract requires comprehensive military-compliant packaging, preservation, and labeling services strictly aligned with MIL-STD-2073-1E specifications. This includes vacuum sealing of items to prevent moisture and contaminants, incorporation of desiccants to maintain dry internal environments, and application of MIL-STD-129 labeling to ensure accurate identification and tracking throughout military logistics channels. All work must meet rigorous defense standards to ensure long-term integrity, readiness, and compatibility with existing supply chain protocols for equipment and materials under the Department of Defense’s ASC Commodities Division. The opportunity is structured as a subcontract with a response deadline of August 27, 2026, and is classified under NAICS code 323112, indicating it pertains to printing and related support activities. The contract was posted on July 27, 2026, and the performance location and specific point of contact are not detailed, but the award will be administered through the Department of Defense’s defense logistics infrastructure. Interested parties must submit proposals via the designated DIBBS portal by the stated deadline to be considered for award.
Commercial Flexographic Printing

POSTED

about 20 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 541512
New
DIBBS
Cybersecurity Compliance & NIST SP 800-171 ImplementationThe contract requires the implementation and ongoing maintenance of NIST SP 800-171 Rev 2 cybersecurity controls across systems that handle covered defense information, ensuring full compliance with federal protection standards. This includes conducting thorough assessments of current security postures, developing and managing Plans of Action and Milestones to address identified gaps, and establishing robust incident reporting procedures to meet mandated timelines and requirements. All activities must be performed in alignment with the stringent security framework outlined in NIST SP 800-171 Rev 2, with continuous monitoring and documentation to demonstrate adherence. This is a subcontract under the Department of Defense, specifically managed by the ASC Commodities Division, with a NAICS code of 541512 indicating it pertains to computer systems design services. The solicitation was posted on July 27, 2026, and responses are due by August 27, 2026. The place of performance is not specified, but the work must support Defense Information systems, and all compliance activities must be executed regardless of location. The contract emphasizes sustained operational security, formal documentation, and accountability through structured remediation efforts and timely incident response.
Computer Systems Design Services

POSTED

about 20 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 541330
New
DIBBS
Quality Assurance & Government Inspection Support ServicesThe contract entails providing advanced inspection systems and comprehensive support services to facilitate government-led quality verification at the point of origin, ensuring full compliance with MIL-STD-1916 and ASQ Z1.4 standards. This includes establishing robust audit readiness protocols, maintaining accurate and accessible recordkeeping systems, and managing nonconformances through structured corrective action processes to uphold defect prevention and continuous quality improvement. The scope demands integration of inspection technologies and procedures that enable real-time data capture, traceability, and reporting to meet rigorous defense quality requirements. The work is classified as a subcontract under NAICS code 541330 and is being administered by the ASC Commodities Division within the Department of Defense. The solicitation was posted on July 27, 2026, with responses due by August 27, 2026. While specific performance locations and point of contact details are not provided, the nature of the services implies operations at supplier or manufacturing facilities where government quality verification takes place. Successful proposers must demonstrate experience with military standards, proven quality systems, and the ability to deliver scalable inspection infrastructure capable of supporting high-stakes defense supply chain integrity.
Engineering Services

POSTED

about 20 hours ago

DEADLINE

in about 1 month
View Details