This Solicitation opportunity from Department Of Defense was posted on August 4, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.
NUT, SELF-LOCKING, PLATE
Contract Overview
Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.
Active Opportunities Like This One
AI Contract Overview
Solicitation SPE4A7-26-R-X974 is an Indefinite Delivery Contract for the procurement of one self-locking plate nut, identified by NSN 5310-00-809-7437 and part number HS4482-048-3. This critical application item must be manufactured in accordance with reference drawing 02731 HS4482 Revision B. The contract is structured as a bilateral Simplified Indefinite-Delivery Contract with a total value not to exceed 349,999.99 dollars. Delivery is required within 103 days after receipt of order, with FOB and inspection/acceptance points set at the destination. The contractor must adhere to strict quality and technical standards, including the DLA Master List of Technical and Quality Requirements, MIL-STD-129 for marking and labeling, and ASTM D3951 for packaging. Sampling and inspection will follow MIL-STD-1916 or ASQ H1331, with a zero-nonconformance requirement for sample lots. Additional compliance mandates include Cybersecurity Maturity Model Certification Level 2 self-assessment, covered defense information protections, and the submission of Safety Data Sheets for hazardous materials. Award is based on a trade-off process where past performance, specifically SPRS assessments and historical quality, is weighted approximately equal to price. Invoicing must be processed through the Wide Area WorkFlow system.
General Info
Agency
NAICS
Place of Performance
USASet-Aside
Timeline
Submission Closed
Organization & Contact Information
Full Description
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD002, COVERED DEFENSE INFORMATION APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SAMPLING: THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION, STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
MCDONNELL DOUGLAS HELICOPTER CO (8V613) P/N HS4482-048-3
CRITICAL APPLICATION ITEM
SPS Technologies, LLC DBA 80539 P/N M13601-048-3
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 02731 HS4482 REVISION NR B DTD 12/07/1976 PART PIECE NUMBER: HS4482-048-3
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the
SPE4A7-26-R-X974
SECTION B
SUPPLY/SERVICE: 5310-00-809-7437 CONT'D
corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments%2FDLMS% 2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT. 0001 5310-00-809-7437 1.000 EA $ _______________ $ ______________ NUT,SELF-LOCKING ,PLATE
PRICING TERMS: Firm Fixed Price
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
FOB: DESTINATION DELIVERY DATE: 103 DAYS ADO
PREP FOR DELIVERY:
PKGING DATA-QUP:010
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
GOVT USE External External External Customer RDD/ ITEM PR PRLI PR PRLI Material Need Ship Date. 0001 1000238326 0001 N/A N/A N/A N/A
SPE4A7-26-R-X974 NSN/Part Number: 5310-00-809-7437 Quantity: 1 EA Delivery: 103 days ADO
More opportunities from Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV
Same awarding agency
Find Active Opportunities Like This
Get AI-powered intelligence on the opportunities still open
Every page of the solicitation package shredded into a compliance breakdown
AI-powered matching based on your capabilities and past performance
Competitor and incumbent history on the requirement
Automated alerts on amendments, Q&A deadlines, and award
Join 650+ contractors already using CLEATUS