Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

NUT, WELDMENT

Active
SPE8E8-26-T-4801Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of a NUT, WELDMENT item identified by NSN 4510-01-345-8948 and part number 6263473-2, with a required quantity of 153 units under solicitation SPE8E8-26-T-4801. The item is classified as a commercial item and a critical application item, subject to CMMC Level 2 cybersecurity self-assessment requirements and the inclusion of technical and quality requirements from the DLA Master List. Mercury and mercury-containing compounds are strictly prohibited in manufacturing or direct contact with the hardware except for specific functional uses like batteries, fluorescent lamps, sensors, and naval-specified reagents, with portable mercury-containing devices needing shock-proof design and secondary containment per NAVSEA 5100-003D. Packaging must comply with MIL-STD-2073-1E and marking must adhere to MIL-STD-129 with no special marking codes applied. Delivery is FOB origin with a strict 167-day timeline, and inspection and acceptance occur at the destination facility located at DDSP New Cumberland, Pennsylvania. The item must be delivered no later than January 18, 2027, following an original requirement of January 4, 2027, with zero variance allowed in quantity. Transportation and shipping instructions are governed by DLAD procedural notes C19 and C20, and the unit of issue is AY as defined by DoD standards. The contract includes provisions for the removal of government identification from non-accepted supplies and references technical drawings available only during open solicitation via DIBBS.

General Info

Procure 153 weldment nuts NSN 4510-01-345-8948 by Jan 18, 2027, CMMC Level 2, no mercury, MIL-STD packaging, FOB origin.

Agency

Department Of Defense → DDSP NEW CUMBERLAND FACILITYView Agency

NAICS

332913 - Plumbing Fixture Fitting and Trim ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

SPE8E8-26-T-4801.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DDSP NEW CUMBERLAND FACILITY
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → DDSP NEW CUMBERLAND FACILITY
View Agency Profile
Office AddressUS
Contacts
Alexis Selby
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
NUT,WELDMENT
NUT<(>,<)> WELDMENT
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
THE DRAWING(S) LISTED BELOW ARE AVAILABLE AT
DLA DURING "OPEN SOLICITATION ONLY".
TO RECEIVE A COPY OF THE DRAWING(S)<(>,<)>
FOR EBS SOLICITATIONS USE URL
HTTPS://WWW.DIBBS.BSM.DLA.MIL/RFQ/
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
RD002, COVERED DEFENSE INFORMATION APPLIES
THIS ITEM IS IDENTIFIED AS A COMMERCIAL ITEM (TO INCLUDE 'COMMERCIAL
OF A TYPE')
CRITICAL APPLICATION ITEM
TDP Rev A Gen 1 IAW BASIC DRAWING NR 53711 6263434 REVISION NR H DTD PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 53711 6263473
SPE8E8-26-T-4801
SECTION B
REVISION NR B DTD 02/26/1984
PART PIECE NUMBER: 6263473-2
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017585905 0001 AY 153.000
NSN/MATERIAL:4510013458948
DELIVERY (IN DAYS):0167
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:JC CUSH/DUNN THKNESS:C
UNIT CONT:D3 OPI:O
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
SPE8E8-26-T-4801
SECTION B
PR: 7017585905 PRLI: 0001 CONT’D
Need Ship Date:01/18/2027 Original Required Delivery Date:01/04/2027
SPE8E8-26-T-4801 NSN/Part Number: 4510-01-345-8948 Quantity: 153 AY Purchase Request: 7017585905QTY: 153 Delivery: 167 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332913
New
DIBBS
FAUCET, DOUBLE
DLA DIST SAN JOAQUIN

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332913
New
DIBBS
FAUCET, DOUBLEThe contract is for the procurement of 38 units of a double faucet with NSN 4510-00-483-5639 under purchase request 7017586143, with a delivery deadline of 167 days after award. The solicitation, numbered SPE8E8-26-T-4779, was posted on July 22, 2026, and bids are due by August 3, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision controlled by the solicitation issue date for simplified acquisitions or the RFP issue date for larger acquisitions unless amended. All supplies must comply with DLA packaging requirements and government identification must be removed from non-accepted items. The contract falls under NAICS code 332913 and is managed by the DLA San Joaquin office under the Department of Defense, with performance location in Tracy, California, 95304-5000. Primary point of contact is Alexis Selby, reachable via email and phone provided.
DLA DIST SAN JOAQUIN

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332913
New
DIBBS
HEATER, PROBE ASSEMBThe contract is for the procurement of six heater probe assemblies with NSN 4540-00-068-1446 under solicitation SPE8E8-26-T-4777, issued by the Department of Defense through Depot Oklahoma. The requirement is set aside entirely for small businesses as defined under FAR 19.5, with a NAICS code of 332913, and responses are due by August 3, 2026. The item must be delivered within 167 days after award to Tinker AFB, Oklahoma, with a postal code of 73145-8000. Technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements apply, identified by R or I numbers, with the applicable revision determined by the solicitation issuance or award date depending on the acquisition size. Packaging must comply with DLA specifications, and any non-accepted supplies must have all government identification removed before return. Primary point of contact for inquiries is Alexis Selby, reachable via email and phone provided.
DEPOT OKLAHOMA

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332913
New
DIBBS
FAUCET, SINGLE
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332913
New
Federal
45--HEATER,PROBE ASSEMB
DLA Troop Support

POSTED

about 9 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332913
New
DIBBS
Component Supply for Hydraulic Kit
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

N/A
View Details
NAICS: 332913
New
DIBBS
Check Valve Supply (NSN 4820-01-538-3340)
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

N/A
View Details
NAICS: 332913
New
DIBBS
Hydraulic Connector Supply (NSN 4730014714128, P/N 6V8633)The contract requires the procurement and delivery of a single military-specification hydraulic connector with part number 6V8633 and national stock number 4730014714128, adhering strictly to DFARS and ANSI X12 compliance standards. The item must be shipped to Fort McCoy, Wisconsin, with a firm delivery deadline of July 28, 2026. This is a subcontract issued under the Defense Logistics Agency, part of the Department of Defense, and falls under the NAICS code 332913 for other fabricated metal product manufacturing. The contract does not specify a solicitation number or set-aside type, and no point of contact or detailed office address information is provided. The performance location is limited to Fort McCoy, WI, and the contract is accessible via a DIBBS portal link for official documentation.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

N/A
View Details
NAICS: 332913
New
DIBBS
Precision Brass Valve Manufacturing and AssemblyThe contract entails the manufacture and delivery of four precision lever-operated brass plug cocks featuring 1/8-inch NPTF ports, a two-hole mounting flange, and a handle height of 1-15/16 inches, all produced to exact military drawing specifications and meeting zero-defect critical attributes as defined by MIL-STD-1916. Each unit must adhere to stringent quality standards ensuring dimensional precision, material integrity, and operational reliability under demanding conditions typical of defense applications. The production process must incorporate rigorous inspection protocols and documentation to guarantee compliance with all technical and performance requirements outlined in the military specifications. The contract is classified as a subcontract under the NAICS code 332913, which pertains to other fabricated metal product manufacturing, and is issued by the Defense Logistics Agency on behalf of the Department of Defense. Although the solicitation number and specific point of contact are not provided, the award is linked to the DIBBS portal under contract number SPE7MC26V3692. Performance is expected to meet the high-reliability standards required for military systems, with no tolerance for defects, and all units must be delivered in complete, functional condition ready for integration into defense equipment or systems.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

N/A
View Details
NAICS: 332913
New
DIBBS
HEATER, ANTI-ICINGThe contract is for the procurement of two anti-icing heaters with the NSN/Part Number 4540-01-470-0777, under solicitation SPE8E8-26-T-4774, issued by the Defense Logistics Agency on behalf of the Department of Defense. The item is subject to strict export control regulations under either ITAR or EAR, meaning any dissemination of associated technical data to foreign persons—whether inside or outside the United States—is prohibited without prior authorization from the Department of State or Department of Commerce. Foreign national employees and U.S. subsidiaries are equally restricted under DFARS 252.225-7048. Access to the technical data is limited to DLA contractors who hold an approved US/Canada Joint Certification Program certification, have completed mandatory DLA training on handling export-controlled data, and have been formally approved by DLA authorities. The delivery requirement is urgent, with a five-day ADO timeline, and the solicitation response deadline is August 3, 2026. The NAICS code 332913 identifies the industrial category, and the primary point of contact for inquiries is Alexis Selby, reachable via email and phone provided. The contract emphasizes compliance with DLA packaging and export-control protocols, restricting distribution exclusively to pre-authorized entities. All bidders must meet the specified export-control qualifications to be considered eligible for award, and any failure to adhere to the technical data handling requirements will result in disqualification.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 332913
New
DIBBS
DRAIN, FLOORThe contract is for 60 units of a floor drain with NSN 4510-00-945-7790, under purchase request 7017575687, with a total required quantity of 210 units to be delivered within 200 days after award. The solicitation is numbered SPE8E8-26-T-4775, posted on July 21, 2026, with responses due by August 3, 2026, and is a total small business set-aside under NAICS code 332913. The placing agency is DLA Dist San Joaquin under the Department of Defense, with performance located in Tracy, California, 95304-5000, and primary point of contact is Alexis Selby at alexis.selby@dla.mil or 3124448487. The item involves technical data subject to export controls under either ITAR or EAR, meaning any disclosure to foreign persons, including those within the United States or at foreign subsidiaries of U.S. companies, requires prior authorization from the Department of State or Department of Commerce. Compliance with DFARS 252.225-7048 is mandatory, and only contractors with approved US/Canada Joint Certification Program certification, completed DOD export-controlled data training, and cleared by DLA through the online questionnaire are permitted to access the controlled technical data.
DLA DIST SAN JOAQUIN

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 332913
New
Federal
45--DRAIN,FLOOR
DLA Troop Support

POSTED

1 day ago

DEADLINE

in 12 days
View Details

More opportunities from Department Of Defense → DDSP NEW CUMBERLAND FACILITY

Same awarding agency

NAICS: 332313
New
DIBBS
DECONTAMINATION SUBThis contract pertains to the procurement of a decontamination subsystem for personnel, identified by part number H-807S and NSN 4230-01-606-7328, with a quantity of twelve units to be delivered FOB origin within 105 days. The item is classified as a commercial item and must comply with all applicable DLA Master List of Technical and Quality Requirements, which supersede other standards such as ASTM D3951. Packaging must adhere to MIL-STD-129 for marking and labeling, and palletization must follow DLA’s packaging requirements. No asbestos as defined by FED-STD-313 is permitted, and mercury or mercury-containing compounds are strictly prohibited except in specific functional applications such as batteries, fluorescent lights, certain instruments, weapon systems, or chemical reagents approved by NAVSEA; in those cases, portable devices must include shockproof construction and a secondary containment barrier per NAVSEA 5100-003D. Documentation for source approval is required, and government identification must be removed from any non-accepted supplies. Inspection and acceptance occur at the destination, with no variance allowed in quantity. The delivery destination is the DLA Distribution facility in New Cumberland, Pennsylvania, and the required ship date is November 17, 2026, with an original delivery target of January 25, 2027. Transportation logistics are governed by DLAD procedural notes C19 and C20, and all units of issue follow DoD standards as referenced in the official DLA unit of issue file.
Plate Work Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335999
New
DIBBS
POWER SUPPLYThe contract specifies the procurement of two power supply units identified by NSN 6130-01-461-4359 and part number AW50S/28-A-ER, supplied by SURE POWER, INC, under solicitation SPE7L7-26-T-4402. Delivery is required within 182 days from the contract date, with FOB origin terms, zero tolerance for quantity variance, and inspection and acceptance occurring at the destination. Packaging must comply with MIL-STD-2073-1E, including specific preservation methods, materials, and unit container specifications, with marking adhering to MIL-STD-129 and palletization following DLA’s packaging requirements. The power supplies must not contain intentional additions of mercury or mercury compounds, except in permitted exceptions such as batteries, fluorescent lighting, sensors, and weapon systems specified by NAVSEA, with portable fluorescent lamps and instruments requiring shockproof design and secondary containment. Sampling for quality verification follows MIL-STD-1916 or comparable zero-based inspection plans, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively, and zero non-conformances required unless otherwise stated. The item is to be delivered to the DLA Distribution facility at New Cumberland, Pennsylvania, and the original required delivery date was October 14, 2026, with a revised need date of February 2, 2027. Technical and quality requirements referenced in the contract are drawn from the DLA Master List of Technical and Quality Requirements, with revisions controlled based on contract type and amendment dates.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333413
New
DIBBS
COLLECTOR, DUSTThe contract pertains to the procurement of a DUST COLLECTOR under solicitation SPE8E8-26-T-4793, with a unit of issue of each (EA) and a total quantity of 18 units. The item is identified by NSN 4460-01-423-6533 and has a unit price of $18.00, resulting in a total price of $324. Delivery is required within 167 days from the contract award, with delivery terms set to FOB origin. The item must be packaged in strict compliance with MIL-STD-2073-1E, including specific packaging methods, materials, and unit container codes, and marked according to MIL-STD-129 with no special marking required. Palletization must adhere to DLA’s packaging requirements, and the final destination is the DDSP New Cumberland Facility in Pennsylvania. The contract enforces stringent material restrictions, prohibiting the intentional addition of mercury or mercury-containing compounds in or in direct contact with the supplied hardware, except for functional uses in batteries, fluorescent lamps, instruments, sensors, controls, weapon systems, or chemical reagents specified by NAVSEA. Portable fluorescent lamps or instruments containing mercury must be shockproof and feature a secondary containment boundary per NAVSEA 5100-003D. The procurement is governed by technical and quality standards referenced from the DLA Master List, with revisions determined based on solicitation and award timelines. Inspection and acceptance occur at the destination. The delivery deadline is January 18, 2027, originally required for September 8, 2026. All transportation logistics are directed per DLAD Proc Notes C19 and C20, and point of contact for inquiries is Alexis Selby at the Department of Defense.
Industrial and Commercial Fan and Blower and Air Purification Equipment Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332410
New
DIBBS
VALVE, CONTROLThis contract specifies the procurement of a control valve identified by NSN 4410008629398 and part number 020360DU from Clyde Bergemann Inc, with a quantity of five units to be delivered FOB origin within 167 days. The item is classified as a critical application component, and all supplies must strictly comply with DLA packaging requirements as outlined in RP001 and MIL-STD-2073-1E, including packaging, marking per MIL-STD-129, and palletization standards. Mercury and mercury-containing compounds are prohibited from intentional addition or direct contact with the hardware, except for specific functional uses such as batteries, fluorescent lamps, instruments, sensors, controls, weapon systems, and chemical reagents authorized by NAVSEA, with portable devices containing mercury requiring shock-proof construction and a secondary containment barrier per NAVSEA 5100-003D. The contract includes no variance in quantity, with inspection and acceptance occurring at the destination, and requires adherence to DLA’s technical and quality standards referenced from the DLA Master List. Delivery is to be made to the DDSP New Cumberland Facility in Pennsylvania, with a required ship date of January 18, 2027, and the solicitation was issued as a Women-Owned Small Business Set-Aside under NAICS code 332410 with a response deadline of August 3, 2026.
Power Boiler and Heat Exchanger Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 326191
New
DIBBS
PLUMBING SUB-ASSYThe contract is for the procurement of a plumbing sub-assembly identified by NSN 4510-01-601-1511, with a quantity of 28 units, under purchase request 7017585193. Delivery is required within 167 days after award, and the solicitation number is SPE8E8-26-T-4824, with a response deadline of August 3, 2026. The solicitation was posted on July 22, 2026, and is managed by the DLA New Cumberland Facility under the Department of Defense. Technical and quality requirements are incorporated by reference from the DLA Master List of Technical and Quality Requirements, accessible via the specified DLA website, with the applicable revision determined by the solicitation or award date depending on the acquisition size. The item is subject to removal of government identification if not accepted. The NAICS code is 326191, and the place of performance is New Cumberland, Pennsylvania, with Alexis Selby listed as the primary point of contact via email and phone.
Plastics Plumbing Fixture Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332410
New
DIBBS
BOILERThe contract pertains to the procurement of a single boiler unit identified by NSN 4410-01-667-3882 and part number 61301608364, supplied by GETINGE USA SALES, LLC and GETINGE USA INC, under solicitation SPE8E8-26-T-4805. The requirement is part of a total small business set-aside under NAICS code 332410, with delivery due in 167 days from the contract award, targeting a ship date of January 18, 2027, and an original delivery deadline of December 31, 2026. The item is to be delivered FOB origin with zero variance in quantity, inspected and accepted at destination, and must comply with DLA packaging standards including MIL-STD-2073-1E and MIL-STD-129 for marking, with no special marking required. Packaging must be palletized per DLA requirements, using specified methods and materials, and shipped to the DLA Distribution facility at New Cumberland, PA. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with revisions controlled by the solicitation or award date depending on acquisition size. Documentation for source approval, removal of government identification from non-accepted items, and covered defense information protocols also apply. The point of contact for the contract is Alexis Selby, reachable via email and phone provided.
Power Boiler and Heat Exchanger Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 326113
New
DIBBS
PLASTIC SHEETThe contract involves the procurement of four units of plastic sheet identified by NSN 9330-01-550-5779 under solicitation SPE8E5-26-T-3658, with a delivery requirement of 167 days after award. The sourcing is governed by DLA packaging and technical quality requirements referenced through R and I numbers, which are defined in the DLA Master List of Technical and Quality Requirements accessible online. Compliance with these requirements is mandatory, and the applicable revision of the master list depends on whether the acquisition is simplified or large, with the relevant date being either the solicitation issue date, award date, or amendment date if modified. Mercury or mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the supplied items, except in specific exempted cases such as batteries, fluorescent lights, designated instruments, sensors, controls, weapon systems, or chemical reagents authorized by NAVSEA. Portable fluorescent lamps and instruments containing mercury must be shockproof and feature a secondary containment barrier, in accordance with NAVSEA 5100-003D. The place of performance is New Cumberland, Pennsylvania, with the contract managed by the Defense Logistics Agency’s New Cumberland Facility under the Department of Defense. The point of contact is Don Trachtman, reachable via email and phone listed. The solicitation was posted on July 22, 2026, with responses due by August 3, 2026.
Unlaminated Plastics Film and Sheet (except Packaging) Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 444180
New
DIBBS
FOUNTAIN, EYE AND FACEThe contract is for the procurement of 260 portable, self-contained eye and face wash stations manufactured by Bradley Corporation, part number S19-921, meeting ANSI Z358.1 standards. Each unit features gravity flow, an 8-ounce bottle of water preservative, and is designed to deliver a 15-minute flush with a 7-gallon capacity. The equipment must be counter or wall mounted and comply strictly with DLA packaging, marking, and shipping requirements under MIL-STD-2073-1E and MIL-STD-129, with no special marking required. Mercury or mercury-containing compounds are prohibited from direct contact with the hardware except under specific exceptions for functional components like batteries or sensors, with additional containment rules for portable devices per NAVSEA 5100-003D. The product is identified by NSN 4240-01-234-1796, and delivery is required FOB origin within 28 days to the DDSP New Cumberland Facility in Pennsylvania, with a required ship date of April 24, 2026. The contract is subject to DLA’s Master List of Technical and Quality Requirements, and the solicitation is a total small business set-aside under NAICS code 444180, issued under contract number SPE8E6-26-T-3792 with a response deadline of August 3, 2026.
Other Building Material Dealers

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 326299
New
DIBBS
COMPENSATOR, BUOYANCThe contract specifies the procurement of 33 units of the COMPENSATOR, BUOYANC with NSN 4220-01-524-8491 and part number RANGER BC/M from ZEAGLE SYSTEMS INC, issued under solicitation SPE8E6-26-T-3791. Delivery is required within 167 days of award, with FOB origin terms and no variance allowed in quantity. Inspection and acceptance occur at the destination, and all items must comply with the DLA Master List of Technical and Quality Requirements, which override any conflicting standards such as ASTM D3951. Packaging must adhere to MIL-STD-129 labeling and palletization requirements per RP001, with each unit packaged in accordance with the specified unit of issue and quantity per unit pack. Final delivery is directed to the DLA Distribution facility in New Cumberland, Pennsylvania, with a required ship date of January 18, 2027, following an original required delivery date of September 12, 2026. Transportation logistics are governed by DLAD Proc Notes C19 and C20, and the item is subject to potential Covered Defense Information protocols under RD003. All technical, quality, and packaging specifications referenced take precedence over general industry standards.
All Other Rubber Product Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332618
New
DIBBS
WIRE FABRICContract SPE8E4-26-T-1908 specifies the procurement of 10 rolls of steel welded wire fabric, each roll measuring 60 inches wide and 150 feet long, with a square mesh of 6 inches by 6 inches and filament size of 0.1920 inches, featuring unfinished edges. The product must comply with ASTM A1064/A1064M Revision dated April 15, 2024, and is subject to technical and quality requirements from the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, which take precedence over all other standards including ASTM D3951. Each shipment requires a Certificate of Quality Compliance or Mill-Material Certification, with copies provided to both the recipient and the DLA Troop Support Contracting Officer. Sampling follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and attributes are verified at specified levels. Packaging must conform to MIL-STD-129 and DLA Packaging Requirements RP001, with palletization and unit packing as defined, while transport and delivery are governed by DLA procedural notes. The delivery destination is the DLA Distribution facility in New Cumberland, Pennsylvania, with delivery due 167 days after contract award under FOB Origin terms, no quantity variance permitted, and inspection and acceptance occurring at the destination. The purchase request number is 7017585539, with the original required delivery date of February 18, 2027, and a need ship date of January 18, 2027.
Other Fabricated Wire Product Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333413
New
DIBBS
PURIFIER UNIT, AIRThe contract is for the procurement of eight air purifier units, identified by NSN 4460-01-460-6553 and part number 080143 from BAUER COMPRESSORS, INC., under solicitation SPE8E8-26-T-4794. Delivery is required within 151 days of contract award, with shipment originating FOB origin and no tolerance for quantity variance. The units must comply with strict packaging standards per MIL-STD-2073-1E and MIL-STD-129, including specific preservation methods, wrapping materials, and unit container specifications, and must be palletized according to DLA packaging requirements. Mercury or mercury-containing compounds are strictly prohibited unless part of exempted functional components like batteries or instruments, and any such exempted items must include a secondary containment as specified by NAVSEA 5100-003D. The contract incorporates all technical and quality requirements from the DLA Master List of Technical and Quality Requirements, with revisions governed by the solicitation issue date. The items are to be delivered to the DLA Distribution DDSP New Cumberland Facility in New Cumberland, PA, with a required ship date of January 2, 2027, although the original delivery deadline is September 30, 2026. Inspection and acceptance occur at the destination point, and special marking is not required. Transportation and freight shipping instructions align with DLA Procurement Notes C19 and C20. The contract falls under NAICS code 333413 and is managed by the Department of Defense through the DDSP New Cumberland Facility, with primary point of contact Alexis Selby. All supplies must be free of government identification upon rejection and meet the full scope of defense acquisition regulations regarding controlled information, as this is designated as a critical application item.
Industrial and Commercial Fan and Blower and Air Purification Equipment Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336413
New
DIBBS
LIGHT, NAVIGATIONAL,The contract pertains to the procurement of 70 units of a navigational light, identified by NSN 6220-01-628-9651 and part number 34000-7 manufactured by GLAMOX AQUA SIGNAL CORPORATION, under solicitation SPE8E7-26-T-3386. Delivery is required within 167 days from the award date, with terms set at FOB origin and no variance allowed in quantity, meaning exactly 70 units must be delivered. Inspection and acceptance occur at the destination, and packaging must comply fully with MIL-STD-2073-1E and MIL-STD-129 for marking, including precise codes for packaging methods, materials, and containers as specified. The item is subject to DLA’s Packaging Requirements for Procurement and Hazmat packaging standards, with shipments directed to the DLA Distribution facility in New Cumberland, Pennsylvania. The contract incorporates technical and quality requirements referenced from the DLA Master List, and all provisions are governed by the version of the master in effect on the solicitation issue date. The original delivery deadline is December 14, 2026, but the needed ship date is set for January 18, 2027, allowing time for processing and logistics. Payment is based on a unit price of $70, resulting in a total contract value of $4,900. The point of contact for inquiries is Kelly Mitchell of the Department of Defense, with all correspondence and compliance governed under DLA procedures and federal acquisition standards.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details